67 resultados para Reasons to believe
Resumo:
The Generator Coordinate Hartree-Fock (GCHF) method is applied to generate extended (20s14p), (30s19p13d), and (31s23p18d) Gaussian basis sets for the 0, Mn, and La atoms, respectively. The role of the weight functions (WFs) in the assessment of the numerical integration range of the GCHF equations is shown. These basis sets are then contracted to [5s3p] and [11s6p6d] for 0 and Mn atoms, respectively, and [17s11p7d] for La atom by a standard procedure. For quality evaluation of contracted basis sets in molecular calculations, we have accomplished calculations of total and orbital energies in the Hartree-Fock-Roothaan (HFR) method for (MnO1+)-Mn-5 and (LaO1+)-La-1 fragments. The results obtained with the contracted basis sets are compared with values obtained with the extended basis sets. The addition of one d polarization function in the contracted basis set for 0 atom and its utilization with the contracted basis sets for Mn and La atoms leads to the calculations of dipole moment and total atomic charges of perovskite (LaMnO3). The calculations were performed at the HFR level with the crystal [LaMnO3](2) fragment in space group C-2v the values of dipole moment, total energy, and total atomic charges showed that it is reasonable to believe that LaMnO3 presents behaviour of piezoelectric material. (C) 2003 Elsevier B.V. All rights reserved.
Resumo:
The generator coordinate Hartree-Fock method was used to develop 20s17p, 30s20p14d, and 30s21p16d Gaussian basis sets for the O ((3)p), Mn (S-6), and Y (D-2) atoms, respectively. The Gaussian basis sets were contracted to 20s17p/9s7p, 30s20p14d/11s7p7d, and 30s21p16d/14s7p7d and utilized in calculations of total energy and orbital energies of the (MnO1+)-Mn-5 and (YO1+)-Y-3 fragments to evaluate its quality in molecular studies. Finally, the contracted basis set for O atom was supplemented with one polarization function of d symmetry and used along with the other contracted basis sets (for Mn and Y) to calculate dipole moments, total energy, and total atomic charges in YMnO3 in space group D-6h. The analysis of those properties showed that is reasonable to believe that YMnO3 present behavior of piezoelectric material. (C) 2003 Elsevier B.V. All rights reserved.
Resumo:
In previous articles we reported through theoretical studies the piezoelectric effect in BaTiO3, SmTiO3, and YFeO3. In this paper, we used the Douglas-Kroll-Hess (DKH) second-order scalar relativistic method to investigate the piezoelectricity in YTiO3. In the calculations we used the [6s4p] and [10s5p4d] Gaussian basis sets for the O (3P) and Ti (5S) atoms, respectively, from the literature in combination with the (30s21p16d)/[15s9p6d] basis set for the Y ( 3D) atom, obtained by generator coordinate Hartree-Fock (GCHF) method, and they had their quality evaluated using calculations of total energy and orbital energies (HOMO and HOMO-1) of the 2TiO+1 and 1YO+1 fragments. The dipole moment, the total energy, and the total atomic charges in YTiO3 in C s space group were calculated. When we analyze those properties we verify that it is reasonable to believe that YTiO3 does not present piezoelectric properties. Copyright © 2011 Raimundo Dirceu de Paula Ferreira et al.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
A new chart based on sample variances for monitoring the covariance matrix of multivariate processes
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
We propose a new statistic to control the covariance matrix of bivariate processes. This new statistic is based on the sample variances of the two quality characteristics, in short VMAX statistic. The points plotted on the chart correspond to the maximum of the values of these two variances. The reasons to consider the VMAX statistic instead of the generalized variance vertical bar S vertical bar is its faster detection of process changes and its better diagnostic feature; that is, with the VMAX statistic it is easier to identify the out-of-control variable. We study the double sampling (DS) and the exponentially weighted moving average (EWMA) charts based on the VMAX statistic. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
Speech and language disorders are some of the most common referral reasons to child development centers accounting for approximately 40% of cases. Stuttering is a disorder in which involuntary repetition, prolongation, or cessation of the sound precludes the flow of speech. About 5% of individuals in the general population have a stuttering problem, and about 80% of the affected children recover naturally. The causal factors of stuttering remain uncertain in most cases; studies suggest that genetic factors are responsible for 70% of the variance in liability for stuttering, whereas the remaining 30% is due to environmental effects supporting a complex cause of the disorder. The use of high-resolution genome wide array comparative genomic hybridization has proven to be a powerful strategy to narrow down candidate regions for complex disorders. We report on a case with a complex set of speech and language difficulties including stuttering who presented with a 10Mb deletion of chromosome region 7q33-35 causing the deletion of several genes and the disruption of CNTNAP2 by deleting the first three exons of the gene. CNTNAP2 is known to be involved in the cause of language and speech disorders and autism spectrum disorder and is in the same pathway as FOXP2, another important language gene, which makes it a candidate gene for causal studies speech and language disorders such as stuttering. (C) 2010 Wiley-Liss, Inc.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
OBJETIVO: Verificar se professores de canto de diferentes gêneros musicais utilizam expressões metafóricas (imagens) como ferramenta didática para trabalhar a ressonância vocal, se existe correspondência fisiológica pretendida para cada metáfora empregada e os motivos para utilização de tal linguagem. MÉTODOS: A amostra foi composta por 20 professores de canto, com experiência profissional mínima de cinco anos, atuantes em quatro abordagens do ensino de canto, sendo cinco professores por abordagem. Os professores responderam um questionário baseado em pesquisas já concluídas na área. As questões abordaram o histórico na docência de canto e a utilização ou não de metáforas. Aos professores que responderam afirmativamente foi solicitada a citação de três imagens correntemente utilizadas no ensino da ressonância bem como a explicação dos eventuais objetivos fisiológicos e musicais associados. As entrevistas foram gravadas em aparelho digital, transcritas na íntegra, analisadas e categorizadas. RESULTADOS: Dos professores entrevistados, 90% utilizavam imagens no trabalho com ressonância por motivos didáticos técnicos e musicais; 88,8% dos professores que afirmaram utilizar tal linguagem e que disseram ter objetivos fisiológicos associados não os descreveram de forma objetiva ou não os distinguiram de objetivos musicais e proprioceptivos. CONCLUSÃO: A maioria dos professores pesquisados utiliza metáforas como ferramenta didática, por acreditar que elas estimulam a propriocepção e a musicalidade, e que a instrução por meio de linguagem fisiológica é muito complexa. Tal achado pode estar associado ao fato de que esses profissionais tendem a não separar o processo fisiológico de produção da voz do processo subjetivo da criação artística.
Resumo:
In a previous report we studied theoretically the piezoelectric effect in barium titanate (BaTiO3) [O. Treu Filho, J.C. Pinheiro, R.T. Kondo, J. Mol. Struct. (THEOCHEM), 671 (2004) 71]. In this article we applied the Hartree-Fock (HF) theory in the investigation of piezoelectricity in LaFeO3. Initially, the generator coordinate HF (GCHF) method was used to build 22s14p, 30s19p13d, and 32s24p17d Gaussian basis sets for O(3p), Fe(D-5), and La(D-2) atoms. Then those basis sets were contracted to [7s6p], [13s8p6d], and [18s13p7d], respectively. The quality of the contracted basis sets in polyatomic calculations was evaluated through calculations of total and orbital energies (HOMO and HOMO-1) of (FeO1+)-Fe-2 and (LaO1+)-La-1. Finally, the contracted basis sets were supplemented with polarization and diffuse functions and used to investigate the piezoelectricity in LaFeO3. The calculated properties were dipole moment, total energy, and atomic charges and the analysis of those properties showed that covalent bonds constitute the electronic structure of [LaFCO3](2) fragment. Therefore, it is reasonable to believe that LaFeO3 does not present piezoelectric properties. (C) 2006 Elsevier B.V. All rights reserved.