Avaliação do desempenho hidro-energético de sistemas fotovoltaicos utilizados no bombeamento de água

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Panels Produced from Thermoplastic Composites Reinforced with Peach Palm Fibers for Use in the Civil Construction and Furniture Industry

In order to cooperate in minimizing the problems of the current and growing volume of waste, this work aim at the production of panels made from industrial waste -thermoplastic (polypropylene; polyethylene and acrylonitrile butadiene styrene) reinforced with agro-industrial waste - peach palm waste (shells and sheaths). The properties of the panels like density, thickness swelling, water absorption and moisture content were evaluated using the ASTM D1037; EN 317; and ANSI A208.1 standards regarding particle boards. Good results were obtained with formulations of 100% plastic waste; 70% waste plastics and 30% peach palm waste; and 60% waste plastics and 40% peach palm waste.

Alternatives Panels from Waste Plastics Reinforced With Fibers of Pupunha Palm for Use in Civil Construction and Furniture Industry

In order to cooperate in minimizing the problems of the current and growing volume of waste, this work aims at the production of panels made from industrial waste -thermoplastic (Polypropylene - PP; Polyethylene - PE and Acrylonitrile Butadiene Styrene - ABS) reinforced with agro-industrial waste - pupunha palm waste (shells and sheaths). The properties of the panels were evaluated: density, thickness swelling, water absorption and moisture content. It was used the ASTM D1037; EN 317; and ANSI A208.1 standards regarding particle boards. The best results in physical tests were treatments 1 (100% waste plastic), 6 (60% plastic waste and 40% waste of pupunha) and 7 (70% waste plastic and 30% waste of pupunha). The best results in the mechanical tests were treatments 3 (30% de residuos plasticos e 70% de residuos da pupunha), 4 (40% de residuos plasticos c 60% de residuos da pupunha) and 5 (50% de residuos plasticos e 50% de residuos da pupunha). For mechanical tests it was concluded that the results of modulus of rupture and of modulus of elasticity the best treatments were those with more fibers. In the tensile tests perpendicular to the surface, it is clear that using more waste plastics leads to the best results. It was concluded that the waste can be used as raw material for the production of alternative materials mainly in civil construction and furniture industries, and it can be employed in urban or rural environment, given the concept of eco-efficient products.

Study of Brazilian commercial Oriented Strand Board panels using stress wave

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Properties of juvenile and mature woods of Hevea brasiliensis untapped and with tapping panels

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Use of a cashew nut shell liquid resin as a potential replacement for phenolic resins in the preparation of panels - a review

The Cashew Nut Shell Liquid (CNSL) can be considered as a versatile raw material with wide applications in the form of surface coatings, paints and varnishes, as well as the production of polymers. Within this context, the chemical constituents of CNSL (anarcadic acid, cardanol, 2-cardol and methylcardol) become promising in the development of new materials components. Once separated, CNSL can be used in the research and development of additives, surfactants, pharmaceuticals, pesticides, polymers, resins and others. Being a byproduct, CNSL used in the preparation of new materials is characterized as a truly technological innovation.

Mathematical analysis of maximum power generated by photovoltaic systems and fitting curves for standard test conditions

The rural electrification is characterized by geographical dispersion of the population, low consumption, high investment by consumers and high cost. Moreover, solar radiation constitutes an inexhaustible source of energy and in its conversion into electricity photovoltaic panels are used. In this study, equations were adjusted to field conditions presented by the manufacturer for current and power of small photovoltaic systems. The mathematical analysis was performed on the photovoltaic rural system I- 100 from ISOFOTON, with power 300 Wp, located at the Experimental Farm Lageado of FCA/UNESP. For the development of such equations, the circuitry of photovoltaic cells has been studied to apply iterative numerical methods for the determination of electrical parameters and possible errors in the appropriate equations in the literature to reality. Therefore, a simulation of a photovoltaic panel was proposed through mathematical equations that were adjusted according to the data of local radiation. The results have presented equations that provide real answers to the user and may assist in the design of these systems, once calculated that the maximum power limit ensures a supply of energy generated. This real sizing helps establishing the possible applications of solar energy to the rural producer and informing the real possibilities of generating electricity from the sun.

A comparison of statistical methods for genomic selection in a mice population

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da movimentação de plantas aquáticas imersas presentes no reservatório da UHE Eng. Souza Dias - Jupiá

O objetivo deste estudo foi desenvolver um método para determinação de pontos de reprodução e de suas respectivas importâncias na disseminação das espécies E. densa, E. najas e C. demersum no reservatório de Jupiá. Foram monitorados dez locais nos quais se encontrou registro de altas infestações dessas espécies. Dois desses locais situam-se no rio Paraná, nas lagoas denominadas de Ferradura e Pernilongo; os outros oito sítios estão localizados no rio Tietê, nas lagoas marginais Testemunha, Barrenta, Vírgula e Flórida, e no leito do rio nos pontos Acima da Ponte dos Barrageiros, Abaixo da Ponte, Baía ao Lado da Ponte e em frente da Praia de Itapura. em cada um desses sítios de reprodução foram liberados e monitorados dez blocos de plantas aquáticas imersas por mês. Os blocos possuíam volume de 0,14 cm³ e receberam uma etiqueta plástica de identificação externa e uma bóia de cor laranja, com o objetivo de serem facilmente localizadas ou visualizadas à distância. Após a soltura, cada bloco foi georreferenciado por meio de um aparelho GPS, sendo o seu deslocamento avaliado a cada 15 dias. Os sítios Lagoa Vírgula, Lagoa Testemunha e Lagoa Barrenta destacaram-se quanto ao número de blocos (30, 20 e 19 blocos, respectivamente), que percorreram distâncias superiores a 500 m e, conseqüentemente, saíram de seus respectivos locais de reprodução. A grande maioria dos blocos permaneceu dentro da Lagoa Flórida; somente 12 blocos saíram e alcançaram o leito do rio Tietê. O sítio denominado Leito Acima da Ponte foi o que mais se destacou dentre os três localizados no leito do rio Tietê, pois forneceu 18 blocos de plantas, enquanto os sítios Abaixo da Ponte e Baía ao Lado da Ponte forneceram 15 e 14 blocos, respectivamente. O sítio Praia de Itapura foi o que apresentou menor importância em relação ao fornecimento de plantas imersas no rio Tietê, sendo localizadas apenas 11 bóias com deslocamento superior a 500 m. Os sítios de reprodução localizados no rio Paraná também contribuíram para o fornecimento de plantas imersas ao reservatório de Jupiá; nove blocos saíram da Lagoa Pernilongo e apresentaram deslocamentos superiores a 500 m. Entretanto, os sítios Lagoa Barrenta e Lagoa Ferradura foram aqueles que mais contribuíram com a chegada de plantas na tomada de água da UHE Eng. Souza Dias, uma vez que foram recolhidos, respectivamente, seis e quatro blocos de plantas provenientes desses locais de dispersão. A metodologia utilizada mostrou-se eficaz quanto à avaliação da movimentação de plantas aquáticas imersas dentro do reservatório de Jupiá.

Dynamic stationary response of reinforced plates by the boundary element method

A direct version of the boundary element method (BEM) is developed to model the stationary dynamic response of reinforced plate structures, such as reinforced panels in buildings, automobiles, and airplanes. The dynamic stationary fundamental solutions of thin plates and plane stress state are used to transform the governing partial differential equations into boundary integral equations (BIEs). Two sets of uncoupled BIEs are formulated, respectively, for the in-plane state ( membrane) and for the out-of-plane state ( bending). These uncoupled systems are joined to formamacro-element, in which membrane and bending effects are present. The association of these macro-elements is able to simulate thin-walled structures, including reinforced plate structures. In the present formulation, the BIE is discretized by continuous and/or discontinuous linear elements. Four displacement integral equations are written for every boundary node. Modal data, that is, natural frequencies and the corresponding mode shapes of reinforced plates, are obtained from information contained in the frequency response functions (FRFs). A specific example is presented to illustrate the versatility of the proposed methodology. Different configurations of the reinforcements are used to simulate simply supported and clamped boundary conditions for the plate structures. The procedure is validated by comparison with results determined by the finite element method (FEM).

Comparative RH Maps of the River Buffalo and Bovine Y Chromosomes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simulation of free surface flows in a distributed memory environment

A parallel technique, for a distributed memory machine, based on domain decomposition for solving the Navier-Stokes equations in cartesian and cylindrical coordinates in two dimensions with free surfaces is described. It is based on the code by Tome and McKee (J. Comp. Phys. 110 (1994) 171-186) and Tome (Ph.D. Thesis, University of Strathclyde, Glasgow, 1993) which in turn is based on the SMAC method by Amsden and Harlow (Report LA-4370, Los Alamos Scientific Laboratory, 1971), which solves the Navier-Stokes equations in three steps: the momentum and Poisson equations and particle movement, These equations are discretized by explicit and 5-point finite differences. The parallelization is performed by splitting the computation domain into vertical panels and assigning each of these panels to a processor. All the computation can then be performed using nearest neighbour communication. Test runs comparing the performance of the parallel with the serial code, and a discussion of the load balancing question are presented. PVM is used for communication between processes. (C) 1999 Elsevier B.V. B.V. All rights reserved.

Genetic characterization of rabies viruses isolated from frugivorous bat (Artibeus spp.) in Brazil

In Latin America, rabies cases related to frugivorous bats have been reported since 1930's. Recently, two viruses isolated from Artibeus lituratus were proved to be vampire bat variants by monoclonal antibodies panels [2], but their genetic information is not well known. In this report, four rabies viruses were isolated from frugivorous bats (Artibeus spp.) in Brazil and their nucleoprotein gene sequences were determined. These isolates were found to be genotype 1 of lyssavirus and showed the maximum nucleotide sequence homology of 97.6-99.4% with vampire bat-related viruses in Brazil [6]. These results indicate that the Brazilian frugivorous bat rabies viruses in this study are closely related to vampire bat-related viruses that play a main role in rabies virus transmission to livestock in Brazil.

Application of dissociation curve analysis to radiation hybrid panel marker scoring: generation of a map of river buffalo (B-bubalis) chromosome 20

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)