Mapeamento de Paleosuperfícies associadas a identificação de depósitos supérgenos de cobre como ferramenta de exploração mineral na região de Itapeva e Ribeirão Branco- Vale do Ribeira, estado de São Paulo, Brasil

A few examples of supergene ore formation and their interaction with morphogenesis (palaeosurfaces) and weathering mineralogy are discussed. Geomorphological and mineralogical records to characterize palaeosurfaces associate the weathering of primary minerals and their relationship with concentrations of cooper and iron ore deposits in southeastern state of São Paulo, Brazil. We have distinguished two palaeosurfaces generated by several weathering phases and controlled by the geological framework. The first and oldest upper palaeosurfaces (900 - 1000 m a.s.l.), situated in Riberão Branco (Alto do Brancal), were developed on silico-limestones. It is formed by typical iron laterites enriched by secondary products of cooper. The second and younger level palaeosurfaces located in Itapeva (Santa Blandina and Bairro do Sambra). This palaeosurface is formed by copper percolating through the weathered rock (saprolite). Other features can be observed like neo-formed products in laterites. They are classified into two types: clay like silico- cupriferous products (with noticeable amounts of iron) and copper minerals (crysocolla, in their flat slopes). These features allowed the presence of copper ores and their morphogenesis control will help in the exploration and prospecting of supergene ore mineral.

Geologia e Caracterização Tecnológica do Minério de Manganês da Mina Córrego do Cocho, Itapira (SP)

The objects of this study are three manganese ore deposits and one mine derived from lateritic weathering of gondites (spessartine quartzites). These deposits are associated with Mn-rich garnet metasediments of the Itapira Group (Paleoproterozoic) and the reserves were estimated at approximately 2.0 × 10 6 tons with an average grade of 23% MnO 2. The ore minerals are cryptomelane, pyrolusite, lithiophorite, spessartine and psilomelane. Several crystal shapes and textural characteristics were identifi ed in this study, which are related to the degree of liberation, as confi rmed by heavy media separation method. In this study, we determined the main characteristics of the liberation of manganese, which is concentrated in the fi ne grain-size fraction and is lost during ore dressing. Therefore, the low average content of MnO 2 (28%) is due to this loss, whereas at grain size of minus 0.074 mm, contents near 40% MnO 2 were observed. This suggests that the ore can be used for manufacturing manganese sulphate fertilizers. A comparative study with the ore deposits located at Ouro Fino (MG), mainly with the Caneleiras mine, showed that higher degree of liberation occurs in the coarse grain-size fractions (0.84 to 0.074 mm with MnO 2 content of 38%). As a consequence, the ore can be used for manufacturing Fe-Si-Mn alloys.

Biossorção de terras-raras por Sargassum sp: estudos preliminares sobre as interações metal-biomassa e a potencial aplicação do processo para a concentração , recuperação e separação de metais de alto valor agregado em colunas empacotadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Geologia da região da Fazenda Salobo, Vazante - MG

Important deposits of Zn-Pb associated with the Vazante Group, and Au in Group Canastra occur in the Vazante-Paracatu region (MG). They are located in the Brasília Fold Belt, which was generated from a convergent tectonic in the Brasiliano cycle, forming a complex system of imbricated nappes and faults. This study aims to characterize stratigraphic, structural and metamorphic aspects of an area, located in the Salobo’s farm region. A geological mapping in 1:20,000 scale was executed in order to identify the outcropping lithotypes and to collect structural measures. Drill holes were described to support the surface data and samples were selected for the preparation of thin and polished sections. In this context, the occurrence of rock types and hydrothermal processes that had not been previously described were found, for example layers of phosphatic quartzite in the Serra do Poço Verde Formation (SPV), hydrothermal hematites from martitization magnetite in contact by detachment of the Serra do Garrote Formation and SPV in the Vazante Group and layers of microbanded iron formations in Paracatu Formation (Canastra Group). In the area, four deformational phases were recognized, occurring progressively, in which two of them are related to convergent tectonic, with the development of thrust faults, one is associated to tectonic escape and/or reactivation of basement faults and the last has a distensive character, representing the post-convergence relaxation. The metamorphism in the area was subgreenschist facies, reaching lower greenschist, with temperatures up to 350°C

Análise estrutural e microtectônica da inflexão do jordino e depósitos de ouro associados no greenstone belt de Pilar de Goiás

The study area is included in the geological context of the Goias Median Massif, a region where there are associations of Archean granite-gneiss complex (Block Moquém) and a Paleoproterozoic metavolcano-sedimentary sequence ( Pilar greenstone belt ). At the south of area, the greenstone sequence is partially overlain by Neopreoterozoic metasediments of the Araxá Group. The lithostratigraphic units of the Pilar greenstone belt define a shift from about N30W direction (north of the deposit) to N60 and 70W in the region south of the Jordino deposit, where are truncated by the Araxá Group rocks. Mineralogical associations described in this paper allow to indicate that the regional metamorphism that affected the rocks of the greenstone belt and Araxá Group, in the mapped area, reached the upper greenschist facies (garnet zone). Data obtained during mapping and by microtectonics analysis allow to indicate the existence of at least four deformational events that acted on the rocks of the Guarinos greenstone belt and Araxá Group, represented by the phases called Dn-1, Dn, Dn + 1 and Dn+2. It was observed that the pattern of sulphide porfitoblasts in mineralized levels is similar to garnet, biotite and muscovite porfiroblasts (tardi to post Dn) that marks the metamorphic peak of the area

Geological and geophysical data integration for delimitation of mineralized areas in a supergene manganese deposits

Geophysical methods are widely used in mineral exploration. This paper discusses the results of geological and geophysical studies in supergene manganese deposits of southern Brazil. Mineralized zones as described in geological surveys were characterized as of low resistivity (20 Omega.m) and high chargeability (30ms), pattern found also in oxides and sulfite mineral deposits. Pseudo-3D modeling of geophysical data allowed mapping at several depths. A relationship between high chargeability and low resistivity may define a pattern for high grade gonditic manganese ore. Large areas of high chargeability and high resistivity may result in accumulation of manganese and iron hydroxides, due to weathering of the gonditic ore, dissolution, percolation and precipitation.

Ultrastructure of ovarian follicular epithelium of the Amazonian fish Pseudotylosurus microps (Teleostei: Belonidae): morphological and histochemical characterization of the intercellular deposits

Neste trabalho é mostrada a grande quantidade de material eletrondenso intercelular no epitélio folicular de P. microps. Aparentemente, o material é captado da circulação e enviado para o folículo por meio dos espaços intercelulares, acumulando-se nos espaços intercelulares médio-apicais do epitélio e no espaço perioocítico. A acumulação é iniciada no oócito primário e prossegue até a vitelogênese. A natureza química desse material é discutida.

Choice of tracers for the evaluation of spray deposits

As substâncias traçadoras são usadas para avaliar a eficácia de pulverizações mas, normalmente, elas modificam a tensão superficial de soluções aquosas. O trabalho objetivou definir um método para avaliar a distribuição e a quantidade de produto depositada em pulverizações, utilizando-se substâncias traçadoras, com a possibilidade de ajustar a tensão superficial da calda. Foram testados os produtos Azul Brilhante a 0,15%, Saturn Yellow a 0,15% suspenso em lignosulfonato Vixilperse a 0,015% e a Fluoresceína Sódica a 0,005%, e as misturas de Azul Brilhante mais Saturn Yellow e Azul Brilhante mais Fluoresceína, nas mesmas concentrações. Para avaliar a degradação as soluções com os produtos foram depositados sobre folhas de citros e avaliados as quantidades através da leitura de unidade de fluorescência e densidade óptica, das soluções sem secar, secas no escuro, exposta ao sol por 2, 4 e 8 horas e comparadas com as leituras obtidas com os depósitos direto em água. A tensão superficial da solução traçadora foi determinada pela passagem de gotas formadas no período entre 20 e 40 segundos. A mistura do Azul Brilhante mais o Saturn Yellow a 0,15%, não apresentou degradação em todas as condições de avaliação, não foi absorvida pelas folhas e manteve a solução na mesma tensão superficial da água, possibilitando ajustá-la aos mesmos níveis das concentrações dos produtos fitossanitários. Isto proporcionou o estabelecimento de um método qualitativo pela avaliação visual sobre luz ultravioleta da distribuição do pigmento e quantitativo com a determinação da quantidade depositada do corante numa mesma solução, em diferentes tensões superficiais na calda de pulverização.

Facies analysis of tertiary alluvial fan deposits in the Jundiai region, São Paulo, southeastern Brazil

This article presents an analysis of facies of sedimentary sequences that occur as discontinuous bodies in the Jundiai region, west of the main Tertiary continental basins of the southeastern Brazil continental rift. Nine identified sedimentary facies, grouped into four associations, suggest the existence of an ancient alluvial fan system whose source area was the Japi mountain range (Serra do Japi). The deposits are considered Tertiary in age and chronocorrelated with those identified in the Atibaia region and at other sites up to 100 km east and northeast of Jundiai. The depositional model adopted to explain the filling of the basin proposes that the alluvial fans, which directly derive from the source area, terminated in a braided channel longitudinal to the basin axis that flowed to northwest, in a similar configuration to that of the present day. This basin may have extended to the Atibaia region or formed a set of small basins laterally contiguous to the faults associated with the rift. Such occurrences show that the formation of rift basins was broader than the area presently occupied by the main deposits. (c) 2005 Elsevier Ltd. All rights reserved.

BACTERIAL LEACHING OF URANIUM ORE FROM FIGUEIRA-PR, BRAZIL, AT LABORATORY AND PILOT-SCALE

A bacterial leaching program was carried out in order to evaluate the potential of applying this process to leach uranium from the ore of Figueira-PR, Brazil. The experiments were carried out in shake flasks, column percolation (laboratory and semipilot scale) and in heap leaching. In shake flasks and in column percolation experiments at laboratory scale, bacterial activity on the ore was confirmed: approximately 60% of uranium was leached, against around 30% in sterilized controls. Column percolation experiments at semipilot scale and heap leaching (850 tons of ore) showed uranium extractions of approximately 50%. In both experiments, a complementary sulfuric acid attack, after the bacterial leaching phase, was necessary to reach this level of uranium extraction.

Sn-polymetallic greisen-type deposits associated with late-stage rapakivi granites, Brazil: fluid inclusion and stable isotope characteristics

Tin-polymetallic greisen-type deposits in the Itu Rapakivi Province and Rondonia Tin Province, Brazil are associated with late-stage rapakivi fluorine-rich peraluminous alkali-feldspar granites. These granites contain topaz and/or muscovite or zinnwaldite and have geochemical characteristics comparable to the low-P sub-type topaz-bearing granites. Stockworks and veins are common in Oriente Novo (Rondonia Tin Province) and Correas (Itu Rapakivi Province) deposits, but in the Santa Barbara deposit (Rondonia Tin Province) a preserved cupola with associated bed-like greisen is predominant. The contrasting mineralization styles reflect different depths of formation, spatial relationship to tin granites, and different wall rock/fluid proportions. The deposits contain a similar rare-metal suite that includes Sri (+/-W, +/-Ta, +/-Nb), and base-metal suite (Zn-Cu-Pb) is present only in Correas deposit. The early fluid inclusions of the Correas and Oriente Novo deposits are (1) low to moderate-salinity (0-19 wt.% NaCl eq.) CO2-bearing aqueous fluids homogenizing at 245-450 degreesC, and (2) aqueous solutions with low CO2, low to moderate salinity (0-14 wt.% NaCl eq.), which homogenize between 100 and 340 T. In the Santa Barbara deposit, the early inclusions are represented by (1) low-salinity (5-12 wt.% NaCl eq.) aqueous fluids with variable CO2 contents, homogenizing at 340 to 390 T, and (2) low-salinity (0-3 wt.% NaCl eq.) aqueous fluid inclusions, which homogenize at 320380 degreesC. Cassiterite, wolframite, columbite-tantalite, scheelite, and sulfide assemblages accompany these fluids. The late fluid in the Oriente Novo and Correas deposit was a low-salinity (0-6 wt.% NaCl eq.) CO2-free aqueous solution, which homogenizes at (100-260 degreesC) and characterizes the sulfide fluorite-sericite association in the Correas deposit. The late fluid in the Santa Barbara deposit has lower salinity (0-3 wt.% NaCl eq.) and characterizes the late-barren-quartz, muscovite and kaolinite veins. Oxygen isotope thermometry coupled with fluid inclusion data suggest hydrothermal activity at 240-450 degreesC, and 1,0-2.6 kbar fluid pressure at Correas and Oriente Novo. The hydrogen isotope composition of breccia-greisen, stockwork, and vein fluids (delta(18)O quartz from 9.9parts per thousand to 10.9parts per thousand, deltaDH(2)O from 4.13parts per thousand to 6.95parts per thousand) is consistent with a fluid that was in equilibrium with granite at temperatures from 450 to 240 degreesC. In the Santa Barbara deposit, the inferred temperatures for quartz-pods and bed-like greisens are much higher (570 and 500 degreesC, respectively), and that for the cassiterite-quartz-veins is 415 degreesC. The oxygen and hydrogen isotope composition of greisen and quartz-pods fluids (delta(18)O(qtz-H2O)=5.5-6.1parts per thousand) indicate that the fluid equilibrated with the albite granite, consistent with a magmatic origin. The values for mica (delta(18)O(mica-H2O)=33-9.8parts per thousand) suggest mixing with meteoric water. Late muscovite veins (delta(18)O(qtz-H2O)=-6.4parts per thousand) and late quartz (delta(18)O(mica-H2O)=-3.8parts per thousand) indicate involvement of a meteoric fluid. Overall, the stable isotope and fluid inclusion data imply three fluid types: (1) an early orthomagmatic fluid, which equilibrated with granite; (2) a mixed orthomagmatic-meteoric fluid; and (3) a late hydrothermal meteoric fluid. The first two were responsible for cassiterite, wolframite, and minor coluChange in the redox conditions related to mixing-of magmatic and meteoric fluids favored important sulfide mineralization in the Correas deposit. (C) 2004 Elsevier B.V. All rights reserved.

THE LONG-TERM EVOLUTION OF IMMUNE DEPOSITS IN PASSIVE HEYMANN NEPHRITIS

1. To study the long term course of passive Heymann nephritis (PHN), 42 adult male Wistar rats were injected with rabbit anti-FX1A serum (PHN group) and 42 rats received normal rabbit serum (control group). Two animals from each group were sacrificed 2 weeks after the inoculation and 10 animals each from the control and PHN groups were sacrificed 4, 13, 25 and 53 weeks later.2. The PHN group exhibited a significant elevation in 20-h proteinuria which lasted from the first week (control group, 9.19 +/- 0.87; PHN group, 25.3 +/- 2.66) to the 25th week (control group, 22.6 +/- 2.15; PHN group, 66.7 +/- 10.4) except for week 17. From week 29 to week 53 there was no statistical difference between the 2 groups.3. Light microscopy showed no difference between the kidneys of PHN and control rats. Immunofluorescence microscopy in PHN rats showed granular deposition of autologous and heterologous IgG on the glomerular basement membrane (GBM), whose intensity and pattern did not change during 53 weeks of observation.4. When examined by electron microscopy the glomeruli of PHN rats showed: a) electron-dense deposits which were initially subepithelial and homogeneous and later intramembranous, granular and often surrounded by an electron-transparent halo; b) focal thickening of the GBM at the sites of intramembranous deposits; c) effacement of podocytes located close to the deposits; d) penetration of the podocytes into the GBM associated with the deposits; e) presence of osmiophilic granules in the cytoplasm of the podocyte located inside the GBM similar to the granules of the deposits next to them. The association of the penetration of the podocytes into the GBM with the deposits and the presence of the osmiophilic granules inside the foot process have not been described previously in PHN.5. The results suggest that the podocytes play a role in the clearing of intramembranous deposits in PHN.

Diamondiferous deposits in the Jequitai area (Minas Gerais, Brazil): a consequence of neotectonic processes

Diamonds obtained from small scale mining near Jequitai and surrounding villages are extracted from Tertiary conglomerates and Quaternary gravels of the Rio Jequitai. Eocretaceous conglomerates, which are locally poorly diamondiferous, cover parts of the Serra da Agua Fria and Serra do Cabral. They are of no economic importance. Analyses of neotectonic, post-Miocene features support a transpressive regime that gave rise to N-S to N25° E transcurrent faults, and WNW normal faults. The main evidence for neotectonic processes are inclined Tertiary sediments, drainage captures, striated laterites of Miocene age, and tilting of blocks that form the Rio Jequitai graben. Diamonds in the Tertiary terraces derived from the Eocretaceous conglomerates, which were affected by neotectonic processes, followed by erosion and concentration during redeposition of sediments.