Stabilization of fluoroindate glasses by magnesium fluoride and other heavy metal fluorides

Their extended transparency in the IR makes them attractive for use as optical fibers for CO laser power delivery and optical amplification. This paper firstly describes the spectacular stabilizing effect of MgF2 on the binary system InF3-BaF2. The investigation of the InF3-BaF2-MgF2 system led to samples up to 5mm in thickness. Further optimization of this system was achieved by incorporation of limited amounts of other fluorides and resulted in increased resistence to devitrification. The second approach of this work was concerned to the investigation of the pseudo-ternary system InF3-GdF3-GaF3 at constant concentrations of ZnF2-SrF2-BaF2-NaF. Several compositions were studied in this system. The samples presented a better thermal stability when compared to other families of fluoride glasses. Therefore, these glasses seem to be very promising for the fabrication of special optical fibers. Thermal data are reported.

Evaluation of the mixtures ammonium phosphate/magnesium nitrate and palladium nitrate/magnesium nitrate as modifiers for simultaneous determination of Cd, Cr, Ni and Pb in mineral water by GFAAS

A method is described for the simultaneous determination of Cd, Cr, Ni and Pb in mineral water samples by graphite furnace atomic absorption spectrometry with a transversely heated graphite atomizer (THGA) and a longitudinal Zeeman-effect background correction system. The electrothermal behavior of analytes during pyrolysis and atomization steps was studied without modifier, in presence of 5 μg Pd and 3 μg Mg(NO3)2 and in presence of 50 μg NH4H2PO4 and 3 μg Mg(NO3)2. A volume of 20 μL of a 0.028 mol L -1 HNO3 solution containing 50 μg L-1 Ni and Pb, 10 μg L-1 Cr and 5 μg L-1 Cd was dispensed into the graphite tube at 20°C. The mixture palladium/magnesium was selected as the optimum modifier. The pyrolysis and atomization temperatures were fixed at 1000°C and 2300°C, respectively. The characteristic masses were calculated as 2.2 pg Cd, 10 pg Cr, 42 pg Ni and 66 pg Pb and the lifetime of the graphite tube was around 600 firings. Limits of detection based on integrated absorbance were 0.02 μg L-1Cd, 0.94 μg L-1 Cr, 0.45 μg L-1 Ni and 0.75 μg L-1 Pb, which exceeded the requirements of Brazilian Food Regulation that establish the maximum permissible level for Cd, Cr, Ni and Pb at 3 μg L-1, 50 μg L-1, 20 μg L-1 and 10 μg L-1, respectively. The recoveries of Cd, Cr, Ni and Pb added to mineral water samples varied within the 93-108%, 96-104%, 87-101% and 98-108% ranges, respectively. Results of analysis of standard reference materials (National Institute of Standards and Technology: 1640-Trace Elements in Natural Water; 1643d-Trace Elements in Water) were in agreement with certified values at the 95% confidence level.

Effects of surface application of calcium-magnesium silicate and gypsum on soil fertility and sugarcane yield

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do ultrassom de alta intensidade sob pressão na redução de Listeria monocytogenes em extrato de carne bovina

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Identificação de práticas de gestão da cadeia de suprimentos adotadas no setor alimentício: estudo de múltiplos casos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dependência e monopólio no comércio internacional de sementes transgênicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do processamento térmico sobre as propriedades mecânicas e microestruturais de um aço XC48 aplicado a componentes automotivos visando atendimento ao projeto ULSAB

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Discussão da utilização do controle estatístico de processo: análise bibliométrica e estudo de caso em uma empresa do setor alimentício

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Criação e implantação de procedimentos logísticos em uma indústria de móveis: estudo de caso

The Brazilian construction is with high production which resulted in many service industries and also for businesses that work in conjunction with it. For the furniture industries would not be different, since they are intimately involved with the construction. To meet the demand for furnishings in Brazil, some clusters of industries have developed in recent years, as in the case of Uba (MG), Arapongas (PR) and Bento Gonçalves (RS). For industries sector can always increase its production combining quality and customer satisfaction, is necessary for their production procedures are studied and improved every day. The aim of this research is to propose a solution for simple information system involving the issue of tracking parts of the furniture produced in an industry custom furniture that depend on outsourced services. The research occurred during four months of the year 2013 for the observation of the production of the industry, where possible observing interference could be carried out with the aim of obtaining improvements in the production line. It is concluded that control of the finished product in a custom furniture industry is a very complex work, because the information system must transmit information faithful, which has not happened formerly, but after the implementation of the identification system was significant improvement the transfer of information between sectors mounts internal and external furniture

O impacto da implantação do sistema ERP na usinagem de moveis de uma empresa de medio porte

This paper analyzes the impact of implementing an information system, Enterprise Resource Planning - ERP, in a small business of the furniture industry. The goal this is show the impacts felt during and after implementation, showing behavioral and technological changes made by the study. The paper concludes by citing about the importance of cultural and behavioral changes for the good use of the system, besides showing the need to adapt to new technologies and ways of working to adapt to today's world of constant change and eternal conflict of the market

Avaliação de qualidade de amidos de mandioca modificados utilizados na fabricação de pão de queijo

The food industry looks for new ways and strategies to standardize the marketing products in the customer market. The modification of the cornflour that are produced in the manufacturing of the cheese bread has been one of the these ways, since some raw materials that are used to make the cornflour present different features in each supplyed allotment. The present research had as a main purpose to analyse such features looking forward to improving the quality of the final product. Thus, some tests were done to verify the pH, humidity and acidity; it was checked the percentage of carbonyl and carboxylic groups and the power of expansion to five different allotments and to farina, for example: pre-gel, natural, expandex farina as the combination of the three cited kinds. After diversifying the allotments, different results were acquired, even to an unique kind of farina and it was not possible to correlate the results of acidity, the percentage of carbonyl and carboxylic groups and the power of expansion. The pH and humidity are proper for each kind of farina. This way, the raw materials that are used for each cheese bread manufacturing must be analysed in each allotment

Marketing experimental: análise de conteúdo na indústria automobilística

The screen work seeks to illustrate the experiential marketing strategies, relating these concepts within the automotive industry. From the methodology of content analysis, success stories of the automotive industry have been analyzed in the light of experimental marketing theories to elucidate the strategies of organizations with their target audience. The objectives aimed at understanding and studying experiential marketing within the market scenario, identify its main characteristics and applicability. The main results stand out that sensory experiences provided by experiential marketing can be the differentiating factors between organizations, especially, those of the automotive sector

Estudo da influência das resinas termofixas uréia formaldeído (UF) e melamina formaldeído (MF) nas características físicas e mecânicas de painéis MDF

Thermosetting resins are very important in the production of MDF panels. They act as an adhesive in the process of compacting and consolidating the fiberboard. Thermoset resins commonly used in this process are based resin urea formaldehyde (UF) and melamine formaldehyde (MF). The first has a higher demand due to its low cost and good performance in meeting the specifications and standards. The second has a high cost compared to MF resin, but adds greater value to the MDF panel, because it gives greater moisture resistance. The process of manufacture of MDF boards was briefly presented in this study to facilitate the understanding of the work. Samples of thermosetting resins (UF and MF) were subjected to physical-chemical seeking to relate these results to the technological performance presented by their respective samples of MDF boards. Two other samples of MDF panels were subjected to physical and mechanical tests. Results were analyzed and related to the award of their respective thermoset resin. Instruments like Dahmos Trend Manager ® and Grecon Dax 5000 and TG - DSC analysis were used in this study to assist in the analysis of the results. It was observed that the results of the analysis of thermosetting resins were within the specified. Such resins do not directly influence the technological tests provided by the MDF panels, but it has been found that the process variables such as humidity and fiber production rate interfere with the performance of the resin accelerating the reaction and therefore their influence on the physical-mechanical properties of the panels MDF. Samples of MDF panels with UF and MF met all the specifications required by the Brazilian standard with regard to the technological quality. The increased demand for UF resin market is justified by the service specifications...

Parceria Brasil - China: a questão do petróleo

Pós-graduação em Relações Internacionais (UNESP - UNICAMP - PUC-SP) - FFC