Proteinogramas séricos de ratos Wistar experimentalmente infectados com Trypanosoma evansi

Estabeleceu-se o perfil eletroforético de proteínas séricas de ratos Wistar experimentalmente infectados com Tripanosoma evansi, utilizando-se 40 ratos, distribuídos em oito grupos de cinco animais cada. Um grupo foi mantido como testemunho (G1), e os demais (G2 a G8) foram inoculados, via intraperitoneal, com cerca de 10³tripomastigota de T. evansi. Amostras de sangue para obtenção de soro foram coletadas no quinto (G2), 10º (G3), 15º (G4), 30º (G5), 45º (G6), 60º (G7) e 75º (G1 e G8) dia após as inoculações. O fracionamento das proteínas foi realizado pela técnica SDS-PAGE. Foram identificadas 31 proteínas, sendo sete de fase aguda: ceruloplasmina (101KD), hemopexina (83KD), transferrina (75KD), albumina (66KD), antitripsina (60KD), haptoglobina (44KD) e glicoproteína ácida (38KD). As proteínas com pesos moleculares 12KD; 22KD; 25KD; 28KD; 32,5KD; 35KD; 53,5KD; 63KD e 72KD apareceram apenas nos ratos inoculados com T. evansi.

Molecular characterization of group A bovine rotavirus in southeastern and central-western Brazil, 2009-2010

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do manejo do solo nas propriedades químicas e físicas em topossequência na bacia do rio Araguaia, Estado do Tocantins

A conversão do Cerrado nativo em áreas de exploração agrícola pode modificar os processos de decomposição e síntese da matéria orgânica do solo e, assim, na disponibilidade de nutrientes. Objetivou-se avaliar as propriedades químicas e físicas do solo em topossequência caracterizada por apresentar uso com pastagem cultivada com Brachiaria brizantha ao lado do Cerrado nativo, na camada de 0- 15 cm de profundidade. O estudo foi realizado no município de Colmeia, Estado do Tocantins. Foram determinados 10 pontos de coleta (cinco para Cerrado nativo e cinco para pasto) para cada posição do relevo (topo, encosta e pedimento); em cada ponto amostral, foram coletados solos em três profundidades (0-5, 5-10 e 10- 15 cm), totalizando 90 amostras. Foram realizadas as seguintes análises químicas e físicas: C orgânico, P, K+, Ca2+, Mg2+, H + Al, pH e granulometria. O C orgânico não apresentou diferença (p > 0,05) entre os valores encontrados no Cerrado nativo e pastagem e as posições do relevo avaliadas. A conversão de Cerrado nativo para uso agropecuário reduziu os teores de P. Os teores de K trocável não foram alterados pela retirada da cobertura vegetal original. Observou-se aumento dos teores de areia quando se passou da meia-encosta para o pedimento.

Efeito do exercício físico e estatinas na função muscular em animais com dislipidemia

As estatinas são utilizadas no tratamento das dislipidemias, com grande tolerância; no entanto, vários efeitos colaterais podem surgir, destacando-se miopatia. A prática regular do exercício físico (EF) produz modificações favoráveis no perfil lipídico; entretanto, pode gerar lesões musculares. OBJETIVO: Avaliar o efeito da associação entre exercício físico e estatinas na função muscular, pela análise histológica, em modelo experimental animal com dislipidemia. MÉTODOS: Foram utilizados 80 ratos machos Wistar, distribuídos em oito grupos, incluindo animais submetidos à dieta hipercolesterolêmica (DH), sinvastatina com (G1) e sem (G2) EF; DH e fluvastatina, com (G3) e sem EF (G4); alimentados com ração comercial (RC) na presença (G5) e ausência de (G6) EF; DH submetidos (G7) ou não (G8) a EF. A DH foi administrada por 90 dias, as estatinas e prática de EF em esteira rolante por oito semanas. Os animais foram sacrificados, e o músculo sóleo retirado para análise histológica. Aplicaram-se os testes t de Student pareado e análise multivariada, com nível significante para p < 0,05. RESULTADOS: As principais alterações histológicas encontradas foram fibras de diferentes diâmetros, atróficas, em degeneração, splitting, edema, infiltrado inflamatório. Essas alterações foram observadas em 90% dos animais do grupo G1, 80% do G2, 70% do G3, 30% do G4, 40% do G5 e 30% do G7. Nos grupos G6 e G8 identificaram-se fibras musculares com morfologia preservada. CONCLUSÕES: Na avaliação histológica muscular, a associação entre fluvastatina, sinvastatina e exercício físico acarreta alterações morfológicas com predomínio no uso da sinvastatina, variando de grau leve a grave, no músculo sóleo de ratos, induzidos pelos inibidores da HMG-CoA redutase.

Influence of aqueous extract of Agaricus blazei on rat liver toxicity induced by different doses of diethylnitrosamine

The modifying potential of prior administration of an aqueous extract of the mushroom Agaricus blazei Murrill (Agaricaceae) (Ab) on hepatotoxicity induced by different doses of diethylnitrosamine (DEN) in male Wistar rats was evaluated. During 2 weeks, animals of groups G3 (Ab+DEN50), G5 (Ab+DEN100), G7 (Ab+DEN200), and G8 (Ab-treated) were treated with the A. blazei through drinking water. After this period, groups G2 (DEN50), G3 (Ab+DEN50), G4 (DEN100) G5 (Ab+DEN100), G6 (DEN200), and G7 (Ab+DEN200) were given a single i.p. injection of 50, 100 and 200 mg/kg of DEN, respectively, while groups G1 (nontreated) and G8 (Ab-treated) were treated with 0.9% NaCl only. All animals were killed 48 h after DEN or NaCl treatments. The hepatocyte replication rate was estimated by the index of the proliferating cell nuclear antigen (PCNA) positive hepatocytes and the appearance of putative preneoplastic hepatocytes through expression of the enzyme glutathione S-transferase placental form (GSTP). After DEN-treatment, ALT levels, PCNA labeling index, and the number of GST-P positive hepatocytes were lower in rats that received A. blazei treatment and were exposed to 100 mg/kg of DEN. Our findings suggest that previous treatment with A. blazei exerts a hepatoprotective effect on both liver toxicity and hepatocarcinogenesis process induced by a moderately toxic dose of DEN. (C) 2002 Elsevier B.V. Ireland Ltd. All rights reserved.

Effect of ion supplementation of a commercial soft drink on tooth enamel erosion

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Nd:YAG Irradiation and Fluoride Application on Dentine Resistance to Erosion in Vitro

Objective: In this paper we evaluated the effect of two fluoridated agents and Nd:YAG irradiation separately and in combination on dentine resistance to erosion. Background Data: The morphological changes in dentin induced by laser treatment may reduce the progression of erosive lesions. Due to the possibility of a synergistic effect of laser with fluoride, this study was conducted. Materials and Methods: Eighty bovine dentine samples (4 x 4 mm) were randomly divided into eight groups, according to the following treatments: G1: untreated (control); G2: acidic phosphate fluoride gel (APF 1.23%) for 4 min; G3: fluoride varnish (NaF 2.26%) for 6 h; G4: 0.5 W Nd: YAG laser (250 mu sec pulse, 10 Hz, 35 J/cm(2), 30 sec); G5: 0.75 W Nd: YAG laser (52.5 J/cm(2)); G6: 1.0 W Nd: YAG laser (70 J/cm(2)); G7: APF + 0.75 W Nd: YAG laser; and G8: NaF + 0.75 W Nd: YAG laser. After the treatments, half of each dentine surface was protected with nail varnish. The samples were stored in artificial saliva (30 mL/sample) for 24 h and submitted to four erosive 1-min cycles. Between the erosive attacks, the blocks were maintained in artificial saliva for 59 min. The erosive wear was evaluated by profilometry. Results: The mean wear (+/- SD, mu m) was: G1: 1.20 +/- 0.20; G2: 0.47 +/- 0.06; G3: 0.81 +/- 0.11; G4: 1.47 +/- 0.32; G5: 1.52 +/- 0.24; G6: 1.49 +/- 0.30; G7: 0.49 +/- 0.11; and G8: 1.06 +/- 0.31 (Tukey's test, p < 0.05). Conclusions: Laser irradiation was not able to reduce dentine erosion. However, fluoride application was able to increase the dentine's resistance to erosion, and APF showed better results than fluoride varnish.

Peel bond strength of resilient liner modified by the addition of antimicrobial agents to denture base acrylic resin

In order to prolong the clinical longevity of resilient denture relining materials and reduce plaque accumulation, incorporation of antimicrobial agents into these materials has been proposed. However, this addition may affect their properties. Objective: This study evaluated the effect of the addition of antimicrobial agents into one soft liner (Soft Confort, Dencril) on its peel bond strength to one denture base (QC 20, Dentsply). Material and Methods: Acrylic specimens (n=9) were made (75x10x3 mm) and stored in distilled water at 37 degrees C for 48 h. The drug powder concentrations (nystatin 500,000U - G2; nystatin 1,000,000U - G3; miconazole 125 mg - G4; miconazole 250 mg - G5; ketoconazole 100 mg - G6; ketoconazole 200 mg - G7; chlorhexidine diacetate 5% - G8; and 10% chlorhexidine diacetate - G9) were blended with the soft liner powder before the addition of the soft liner liquid. A group (G1) without any drug incorporation was used as control. Specimens (n=9) (75x10x6 mm) were plasticized according to the manufacturers' instructions and stored in distilled water at 37 degrees C for 24 h. Relined specimens were then submitted to a 180-degree peel test at a crosshead speed of 10 mm/min. Data (MPa) were analyzed by analysis of variance (alpha=0.05) and the failure modes were visually classified. Results: No significant difference was found among experimental groups (p=0.148). Cohesive failure located within the resilient material was predominantly observed in all tested groups. Conclusions: Peel bond strength between the denture base and the modified soft liner was not affected by the addition of antimicrobial agents.

Curing depth of composite resin light cured by LED and halogen light-curing units

The purpose of this study was to evaluate the polymerization effectiveness of a composite resin (Z-250) utilizing microhardness testing. In total, 80 samples with thicknesses of 2 and 4 mm were made, which were photoactivated by a conventional halogen light-curing unit, and light-curing units based on LED. The samples were stored in water distilled for 24 h at 37C. The Vickers microhardness was performed by the MMT-3 microhardness tester. The microhardness means obtained were as follows: G1, 72.88; G2, 69.35; G3, 67.66; G4, 69.71; G5, 70.95; G6, 75.19; G7, 72.96; and G8, 71.62. The data were submitted to an analysis of variance (ANOVA's test), adopting a significance level of 5%. The results showed that, in general, there were no statistical differences between the halogen and LED light-curing units used with the same parameters.

Effectiveness of calcium hydroxide-based intracanal medicaments against Enterococcus faecalis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fruit and seed ontogeny related to the seed behaviour of two tropical species of Caesalpinia (Leguminosae)

Caesalpinia echinata and C ferrea var. ferrea have different seed behaviours and seed and fruit types. Comparison of the seed ontogeny and anatomy partly explained the differences in seed behaviour between these two species of Brazilian legumes; some differences were also related to fruit development. The seed coat in C. ferrea consisted of two layers of osteosclereids, as well as macrosclereids and fibres, to form a typical legume seed coat, whereas C. echinata had only macrosclereids and fibres. In C. echinata, the developing seed coat had paracytic stomata, a feature rarely found in legume seeds. These seed coat features may account for the low longevity of C. echinata seeds. The embryogeny was similar in both species, with no differences in the relationship between embryo growth and seed growth. The seeds of both species behaved as typical endospermic seeds, despite their different morphological classification (exendospermic orthodox seeds were described for C. echinata and endospermic orthodox seeds for C. ferrea). Embryo growth in C. ferrea accelerated when the sclerenchyma of the pericarp was developing, whereas embryonic growth in C. echinata was associated with the conclusion of spine and secretory reservoir development in the pericarp. Other features observed included an endothelial layer that secreted mucilage in both species, a nucellar summit, which grew up into the micropyle, and a placental obturator that connected the ovarian tissue to the ovule in C. ferrea. (C) 2004 the Linnean Society of London.

Aspectos taxonômicos de Schizomeris Kützing (Chaetophorales, Chlorophyta)

Schizomeris Kützing é uma alga filamentosa sem ramificações e com sistema basal de fixação diferenciado. O gênero contém a espécie-tipo Schizomeris leibleinii Kützing e duas espécies pouco conhecidas, S. irregularis Fritsch & Rich e S. indicum (Ghose) Fritsch & Rich. As espécies são diferenciadas, principalmente, através do tipo de sistema basal de fixação. Contudo, a taxonomia específica do gênero é confusa. Estudos morfométricos e morfológicos foram realizados em populações identificadas como S. leibleinii de acordo com duas abordagens. Na primeira, foram analisadas 11 populações de diferentes localidades e na segunda, duas populações distintas através de coletas mensais durante 11 meses. O diâmetro de filamentos multisseriados, diâmetro e comprimento de células de filamentos multi e unisseriados, presença de constrição, ápice dos filamentos e tipo de sistema basal foram analisados em ambas abordagens. Além disso, estudos cariológicos foram efetuados para complementar as informações taxonômicas. Os resultados revelaram ampla variação morfológica, sendo mais acentuada entre as populações de localidades diferentes que nas mesmas populações ao longo do tempo, mas as características mostraram um gradiente contínuo. Os diferentes tipos de sistemas basais descritos para as espécies do gênero (claviforme, apressório, lobado e rizóides) foram encontrados nas populações estudadas. Esses resultados sugerem que a distinção entre as três espécies é muito frágil e não pode ser apoiada pela diferenciação do sistema basal ou por características métricas. Acredita-se que, por essas razões, o gênero Schizomeris seja composto por uma única espécie. A análise cariológica resultou em n = 12, diferindo de estudos anteriores e algumas possíveis explicações são apresentadas.

Effect of Sodium Ascorbate and the Time Lapse before Cementation after Internal Bleaching on Bond Strength between Dentin and Ceramic

Purpose: To evaluate the effects of the elapsed time (ET) after nonvital bleaching (NVB) and sodium ascorbate application (10%) (SAA) on the shear bond strength of dentin to ceramic.Materials and Methods: Bovine incisors were selected, internally bleached (35% carbamide peroxide) for 9 days and submitted to the following treatments (n = 10): G1, G2, G3-luting after 1, 7, and 14 days; G4, G5, and G6-luting after SAA, 1, 7, and 14 days, respectively. G7 and G8 were not bleached: G7-luting 24 hours after access cavity sealing; G8-luting 24 hours after access cavity sealing after SAA. After NVB, the vestibular dentin was exposed and flattened. The SAA was applied to the dentin (G4, G5, G6, G8) for 10 minutes, and it was then washed and dried. The dentin was etched (37% phosphoric acid), and an adhesive system (Single Bond 2) was applied. Feldspathic ceramic discs (VM7; 4-mm diameter, 3-mm thick) were luted with a dual-resin agent (RelyX ARC, 3M ESPE Dental Products, St. Paul, MN). After 24 hours, specimens were submitted to shear test on a universal testing machine. The data (MPa) were submitted to ANOVA and Dunnet's test (5%).Results: The means (+/- SD) obtained were (MPa): G1 (14 +/- 4.5), G2 (14.6 +/- 3.1), G3 (14 +/- 3.7), G4 (15.5 +/- 4.6), G5 (19.87 +/- 4.5), G6 (16.5 +/- 3.7), G7 (22.8 +/- 6.2), and G8 (18.9 +/- 5.4). SAA had a significant effect on bond strength (p = 0.0054). The effect of ET was not significant (p = 0.1519). G5 and G6 presented higher values than the other bleached groups (p < 0.05) and similar to G7 and G8 (p > 0.05).Conclusions: After NVB, adhesive luting to dentin is recommended after 7 days if sodium ascorbate has been applied prior to dentin hybridization.

Assessment of the effectiveness of light-emitting diode and diode laser hybrid light sources to intensify dental bleaching treatment

Objective. To evaluate the effectiveness of the color change of hybrid light-emitting diode (LED) and low-intensity infrared diode laser devices for activating dental bleaching and to verify the occurrence of a color regression with time. Material and methods. A total of 180 specimens obtained from human premolars were immersed in a coffee solution for 15 days for darkening and then divided into eight experimental groups (n = 20 in each) as follows: G1, bleaching without light; G2, bleaching with halogen light; G3, bleaching with a blue LED (1000 mW/470 nm) and a laser device (120 mW/795 nm) simultaneously; G4, bleaching with an LED emitting blue light (1000 mW/470 nm); G5, bleaching with a blue LED (800 mW/470 nm) and a laser device (500 mW/830 nm) simultaneously; G6, bleaching with a blue LED device (800 mW); G7, bleaching with a green LED (600 mW/530 nm) and a laser device (120 mW/795 nm) simultaneously; and G8, bleaching with a green LED (600 mW). Three measurements were performed (at baseline and 14 days and 12 months after bleaching) using a Vita Easyshade spectrophotometer. The data were submitted to two-way ANOVA and a Tukey test. Results. All groups showed significantly higher Delta E values than Group G1, with the exception of Group G8. Variations in the Delta E values at 14 days were significant when compared with those obtained at baseline and after 12 months. Conclusions. Light activation of the bleaching gel provided faster and more intense bleaching than use of the bleaching gel without light activation. Combinations of low-intensity diode lasers are ineffective as a bleaching gel activator. Color regression was observed after 12 months of storage.

Composition-resolved size distributions of volcanic aerosols in the Mt. Etna plumes

Particle size distributions for soluble and insoluble species in Mt. Etna's summit plumes were measured across an extended size range (10 nm < d < 100 mu m) using a combination of techniques. Automated scanning electron microscopy (QEMSCAN) was used to chemically analyze many thousands of insoluble particles (collected on pumped filters) allowing the relationships between particle size, shape, and composition to be investigated. The size distribution of fine silicate particles (d < 10 mu m) was found to be lognormal, consistent with formation by bursting of gas bubbles at the surface of the magma. The compositions of fine silicate particles were found to vary between magmatic and nearly pure silica; this is consistent with depletion of metal ions by reactions in the acidic environment of the gas plume and vent. Measurements of the size, shape and composition of fine silicate particles may potentially offer insights into preemission, synemission, and postemission processes. The mass flux of fine silicate particles from Mt. Etna released during noneruptive volcanic degassing in 2004 and 2005 was estimated to be similar to 7000 kg d(-1). Analysis of particles in the range 0.1 < d/mu m < 100 by ion chromatography shows that there are persistent differences in the size distributions of sulfate aerosols between the two main summit plumes. Analysis of particles in the range 0.01 mu m < d < 0.1 mu m by scanning transmission electron microscopy (STEM) shows that there are significant levels of nanoparticles in the Mt. Etna plumes although their compositions remain uncertain.