A non-invasive method for silencing gene transcription in honeybees maintained under natural conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Virulência de Aphanocladium album (Preuss) Gams e Verticillium lecanii (Zimm.) Viégas (Deuteromycotina: Hyphomycetes) para o Percevejo-de-renda da seringueira, Leptopharsa heveae (Drake & Poor) (Hemiptera: Tingidae)

The lace bug, Leptopharsa heveae is an insect that causes serious damage on rubber trees. In laboratory condition, the strains of Verticillium lecanii (ARSEF 6430, 6431 e 6432) and Aphanocladium album (ARSEF 6433) were tested on third-and fifth-instar nymphs and adults of L. heveae to evaluate their virulence using 2.4 x 10(5) and 2.4 x 10(7) conidia/mL. The bioassays were carried out using Petri dishes whose inner bottoms were covered with damp filter papers. Each Petri dish contained five insects and one rubber tree leaflet. The plates were covered with PVC film to provide high relative humidity, maintained at 26 +/- 0.5 degrees C and a photophase of 14 hours. The Probit analysis was calculated from mortality date of insects killed by fungi. In the highest concentrations, ARSEF 6430 was more virulent for third instar nymphs, and the LT50 was 1.9 days. For the fifth instar, the strains ARSEF 6430, 6433 and 6432 showed similar virulence with LT50 of 2.6, 2.6 and 3.2 days, respectively. For adults, ARSEF 6431 was the most virulent strain with the LT50 recorded at 2.0 days. The smallest concentration did not always cause more than 50% mortality.

Biologia de Leptopharsa heveae Drake & Poor (Heteroptera: Tingidae) e a relação de suas exigências térmicas com a flutuação populacional em seringueira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Parasitismo de Erythmelus tingitiphagus (Soares) (Hymenoptera: Mymaridae) em ovos de Leptopharsa heveae Drake & Poor (Hemiptera: Tingidae), em plantios de seringueira (Hevea brasiliensis Müell. Arg.)

The rubber tree lace bug, Leptopharsa heveae Drake & Poor occurs in high populations in rubber tree plantations and it is a limiting factor in rubber production due to the loss of photosynthetic tissue. The control of the pest has been made mainly with chemical products, which cause environmental contamination. The alternative would be the use of biological control agents, however, information about L. heveae natural enemies are scarce. The parasitoid Erythmelus tingitiphagus (Soares) parasitize eggs of the rubber tree lace bug. The aim of this study was to verify the occurrence of E. tingitiphagus in plantations of several rubber tree clones, located in Itiquira town, Mato Grosso State. The plant leaflets of the clones RRIM 600, PR 255, GT 1, PB 235 and PB 217 were collected weekly from October 2005 to February 2006. Parasitism was recorded during the entire study period. The parasitism rate of L. heveae eggs in the different clones ranged from 16.8 to 20.6%.

Rapid Prototyping applied to surgical planning for correcting craniofacial malformations in wild animals. A case study of a brazilian fox

Veterinary surgery for treatment of wild animals is becoming an increasingly demanding task because it involves animals of different anatomy, many of them are already stressed and treatment must be performed to the highest standard in the minimum period of time. Craniofacial alterations may occur for three main reasons: genetic, functional or a combination of both. It is possible to modify the functional cause using intraoral devices like inclined plane. The treatment planning can be made based on virtual 3D models and rapid prototyping. An approximately 9 months old, 3.7 kg male Brazilian fox (Lycalopex vetulus) was referred to the Veterinary Hospital. Physical examination showed malocclusion with a deviation of the mandible to the right side. The virtual 3D model of the head was generated based on CT image data. The 3D models and rapid prototyping opened up new possibilities for the surgical planning and treatment of wild animals.

Characterisation of protease activity in extracellular products secreted by Giardia duodenalis trophozoites treated with propolis

Results from our laboratory revealed propolis activity on Giardia trophozoites proliferation. Since therapeutic agents can inhibit the activity of proteases related to relevant biologic and physiologic processes of parasites, this study was undertaken to characterise the proteolytic activity of excretory/secretory products (ESP) of trophozoites treated with propolis. ESP was obtained from culture supernatants of trophozoites exposed to 250 and 500 mu g mL(-1) of propolis. ESP were tested in sodium dodecyl sulfate-polyacrylamide gel electrophoresis for the protein profiles and the protease activity was assayed in gelatin-containing gels. Synthetic inhibitors were used to characterise the protease classes. Treated and non-treated ESP showed a similar protein and hydrolysis pattern. A simple pattern of protein composed by five evident bands of approximately 167, 132, 79, 61 and 51 kDa was found, and the zymograms comprised hydrolysis zones distributed from > 170 to 23 kDa. No inhibition was seen on protease activity of propolis-treated trophozoites, whose hydrolysis pattern was similar to control. One may conclude that both ESP degraded gelatin and the activity was predominantly due to cysteine proteases. Although propolis had no effect on the proteolytic activity, further studies could identify the active constituents responsible for propolis antigiardial activity and their mechanisms of action.

Search for narrow resonances in dilepton mass spectra in pp collisions at root s=7 TeV CMS Collaboration

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for large extra dimensions in dimuon and dielectron events in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for a W ' or Techni-rho Decaying into WZ in pp Collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for electroweak production of charginos and neutralinos using leptonic final states in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nonpreference of the lace bug Leptopharsa heveae Drake & Poor (Heteroptera: Tingidae) for rubber tree clones

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modelos alternativos para detecção de locos de características quantitativas (QTL) de carcaça e crescimento nos cromossomos 4, 5 e 7 de suínos

O conhecimento do genoma pode auxiliar na identificação de regiões cromossômicas e, eventualmente, de genes que controlam características quantitativas (QTLs) de importância econômica. em um experimento com 1.129 suínos resultantes do cruzamento entre machos da raça Meishan e fêmeas Large White e Landrace, foram analisadas as características gordura intramuscular (GIM), em %, e ganho dos 25 aos 90 kg de peso vivo (GP), em g/dia, em 298 animais F1 e 831 F2, e espessura de toucinho (ET), em mm, em 324 F1 e 805 F2. Os animais das gerações F1 e F2 foram tipificados com 29 marcadores microsatélites. Estudou-se a ligação entre os cromossomos 4, 6 e 7 com GIM, ET e GP. Análises de QTL utilizando-se metodologia Bayesiana foram aplicadas mediante três modelos genéticos: modelo poligênico infinitesimal (MPI); modelo poligênico finito (MPF), considerando-se três locos; e MPF combinado com MPI. O número de QTLs, suas respectivas posições nos três cromossomos e o efeito fenotípico foram estimados simultaneamente. Os sumários dos parâmetros estimados foram baseados nas distribuições marginais a posteriori, obtidas por meio do uso da Cadeia de Markov, algoritmos de Monte Carlo (MCMC). Foi possível evidenciar dois QTLs relacionados a GIM nos cromossomos 4 e 6 e dois a ET nos cromossomos 4 e 7. Somente quando se ajustou o MPI, foram observados QTLs no cromossomo 4 para ET e GIM. Não foi possível detectar QTLs para a característica GP com a aplicação dessa metodologia, o que pode ter resultado do uso de marcadores não informativos ou da ausência de QTLs segregando nos cromossomos 4, 6 e 7 desta população. Foi evidenciada a vantagem de se analisar dados experimentais ajustando diferentes modelos genéticos; essas análises ilustram a utilidade e ampla aplicabilidade do método Bayesiano.

Temperature investigation of infrared-to-visible frequency upconversion in erbium-doped tellurite glasses excited at 1540 nm

Temperature investigation of infrared-to-visible frequency upconversion in erbium-doped tellurite glasses excited by CW laser radiation at 1540 nm and under cryogenic temperatures is reported. Intense upconversion emission signals around 530, 550 and 660 nm corresponding to the H-2(11/2), S-4(3/2), and F-4(9/2) transitions to the I-4(15/2) ground state were generated and studied as a function of the laser intensity and temperature. The upconversion excitation mechanism of the Er3+ ions emitting energy levels was accomplished via stepwise multiphoton absorption. The green upconversion luminescence exhibited a fivefold intensity enhancement when the temperature of the sample was varied in the range between 5 and 300 K. A maximum green upconversion intensity was attained around 120 K and a steady decreasing behavior for higher temperatures up to 300 K was observed. A model based upon conventional rate equations was used to model the observed temperature evolution of the upconversion luminescence. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Changes of density, thermal conductivity, thermal diffusivity, and specific heat of plums during drying

The thermal properties of plums (Prunus domestica) and prunes were investigated in the moisture content of 14.2-80.4% (wet basis) near room temperature (approximately 28 degrees C). The apparent density of the fruits increased from 1042.9 to 1460.0 kg/m(3), and the bulk density increased from 706.6 to 897.5 kg/m(3) as the plums were dried, following classical empirical models as a function of moisture content. It was found that specific heat, effective thermal diffusivity, and effective thermal conductivity of the prunes increased with the moisture content of the samples, which can be represented by using different empirical models.

Influence of the LiNbO3 and KNbO3 seeds on the sintering and electrical properties of PMN ceramic

The effect of LiNbO3 and KNbO3 seeds on the microstructure and dielectric characteristics of PMN ceramic prepared by columbite route have been investigated with the addition of 0, 1, and 2-wt% of seeds. X-ray diffraction, Scanning Electron Microscopy and an impedance analyzer were used to characterize the influence of seeds on physical characteristics and dielectric properties of PMN. LiNbO3 -seeded PMN samples present a significant increase in the amount of perovskite phase. The addition of LiNbO3 seeds in sintered PMN ceramics at 1100degreesC during 4 h causes a decrease in the porosity and the amount of pyrochlore phase. Weight losses during sintering of PMN ceramics are suppressed more significantly for LiNbO3 -seeded PMN. T-m of PMN ceramics changes with seeds concentration. KNbO3 seeds displace T-m to lower temperature whereas LiNbO3 causes its elevation. Dielectric constants of approximately 13,000 at 1 kHz was measured at -5degreesC in PMN ceramics with 1-wt% of LiNbO3 seeds.