Impact of successive sugarcane harvests and trash management practices on soil microbiological properties

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A snapshot of management practices and nutritional recommendations used by feedlot nutritionists in Brazil

Feedlot consulting nutritionists were invited to participate in a survey of feedlot nutritional and management practices in Brazil. Thirty-one nutritionists completed the survey on a Web site that was designed for collection of survey data. The survey consisted of 94 questions that included general information (n = 10); commodity information (n = 12); and questions about the use of coproducts (n = 5), roughage source and levels (n = 5), finishing diet adaptation methods (n = 7), supplements and micronutrients (n = 8), feed mixers (n = 6), feeding management (n = 3), cattle management and type of cattle fed (n = 16), formulation practices (n = 17), information resources used for nutritional recommendations (n = 2), and 2 additional questions. One final question addressed the primary challenges associated with applying nutritional recommendations in practice. The number of animals serviced yearly by each nutritionist averaged 121,682 (minimum = 2,000; maximum = 1,500,000; mode = 120,000; total = 3,163,750). Twenty-two respondents (71%) worked with feedlots that feed less than 5,000 animals/yr. Labor, along with availability and precision of equipment, seemed to be the main challenges for the nutritionists surveyed. Most of the nutritionists surveyed used TDN as the primary energy unit for formulation. More than 50% of the clients serviced by the 31 nutritionists did not manage feed bunks to control the quantity of feed offered per pen, and 36.6% fed cattle more than 4 times daily. The NRC (1996) and Journal of Animal Science were the most used sources of information by these nutritionists. Overall, general practices and nutritional recommendations provided by the 31 nutritionists surveyed were fairly consistent. Present data should aid in development of new research, future National Research Council models, and recommendations for Brazilian feeding systems in which Bos indicus cattle predominate.

Effect of management practices on screw-worm among sheep in São Paulo State, Brazil

The screw-worm Cochliomyia hominivorax (Coquerel), whose larvae develop in wild and domestic animals as well as in man, is one of the major causes of myiasis in Brazil. Sheep raising is expanding in the state of São Paulo, where information about the infestation of screw-worm is necessary for appropriate control measures. The present data were obtained from questionnaires sent to all sheep breeders belonging to 'Associação Paulista de Criadores de Ovinos' - ASPACO (São Paulo State Association of Sheep Breeders). Response reliability was tested by random visits paid to 10.6% of the respondents. The results show that screw-worm is the most frequent ectoparasite in the flocks and is responsible for the greatest economic losses. Its occurrence is strongly associated with flock size, reaching 100% in hocks consisting of more than 500 animals. Infestation is higher in spring and summer and lowest in the fall. The number of cases increases in the presence of some management practices such as tail amputation. Furthermore, several other associations between the indicators surveyed were also found to be significant. The data obtained will permit the elaboration of strategies for the control of this parasitosis.

Greenhouse gas balance due to the conversion of sugarcane areas from burned to green harvest, considering other conservationist management practices

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measuring supply chain management practices

Purpose: This paper aims to perform an empirical investigation about the constructs and indicators of the supply chain management practices framework. Design/methodology/approach: The measuring framework proposed is based on a survey that was carried out on 107 Brazilian companies. Statistical techniques were employed to verify, validate, and test the reliability of the constructs and their indicators. To validate this framework principal component analysis and structural equation modeling techniques were used. Findings: In general, previous studies suggest six constructs for measuring the supply chain management practices framework. However, in this study a framework was achieved with four constructs of supply chain management practices, namely, supply chain (SC) integration for production planning and control (PPC) support, information sharing about products and targeting strategies, strategic relationship with customer and supplier, and support customer order. This framework has adequate levels of validity and reliability. Research limitations/implications: The main limitation of this study was that only a small sample of companies in a single sector and country were surveyed, and therefore there needs to be further research considering the special conditions in other countries. Originality/value: This study investigated statistically set indicators to discuss the topic supply chain management practices. The framework obtained has good quality of validity and reliability indicators. Thus, an alternative framework has been added to measure supply chain management practices, which is currently a popular topic in the supply chain mainstream literature. Both defined constructs and the validated indicators can be used in other studies on supply chain management. © Emerald Group Publishing Limited.

Factors affecting the adoption of supply chain management practices: Evidence from the Brazilian electro-electronic sector

This study on the factors affecting the adoption of supply chain management (SCM) practices develops four hypotheses based on a literature review, and tests them using survey data of Brazilian electro-electronic firms. The results reveal the big picture of the SCM practices in the sector and suggest that contextual factors such as size, position and bargaining power affect the adoption of SCM practices, which are also more customer oriented. Sector characteristics are very important in analysing SCM practices. Contrary to the findings of literature, the relationship between competitive priorities and SCM practices was not supported statistically. © 2011.

Supply Chain Management practices in the electro-electronics sector in Brazil: Evolutionary approach, information technology adoption and management actions

This paper examines the current level of adoption of Supply Chain Management (SCM) practices in the electro-electronic sector in Brazil and aims to identify the management and Information Technology (IT) actions that have been implemented to support the adoption of those practices. An e-mail survey was conducted. Descriptive statistics techniques were employed for data analysis. This study makes contributions to the electro-electronics sector and to the topics related to SCM, such as identifi cation and level of adoption of SCM practices. Another contribution of this research is the investigation of whether approaches such as Enterprise Resources Planning (ERP), Workshop with Customers, Electronic Data Interchange (EDI), Workshop with Suppliers and electronic Kanban are commonly used to support SCM practices. So far, this is the fi rst research on SCM practices in the electro-electronics sector in Brazil. Copyright © 2012 Inderscience Enterprises Ltd.

Factors affecting the adoption of green supply chain management practices in Brazil: Empirical evidence

The aim of this study is to identify and analyse the factors that affect the adoption of Green Supply Chain Management practices based on empirical evidence from the Brazilian electronics sector. Data are collected in a survey of 100 electronics companies and analysed using statistical analysis of variance and regression methods. The study finds that the size of the company, previous experience with Environmental Management Systems, and the use of hazardous inputs are positively correlated with GSCM practices adoption. Surprisingly, formal pressure from the stronger tier/player in the supply chain is not correlated with the adoption of GSCM practices. Finally, we present some explanations for these findings and suggestions for future research. © 2013 Copyright Taylor and Francis Group, LLC.

Analysing green supply chain management practices in Brazil's electrical/electronics industry using interpretive structural modelling

Industries need to adopt the environmental management concepts in the traditional supply chain management. The green supply chain management (GSCM) is an established concept to ensure environment-friendly activities in industry. This paper identifies the relationship of driving and dependence that exists between GSCM practices with regard to their adoption within Brazilian electrical/electronic industry with the help of interpretive structural modelling (ISM). From the results, we infer that cooperation with customers for eco-design practice is driving other practices, and this practice acts as a vital role among other practices. Commitment to GSCM from senior managers and cooperation with customers for cleaner production occupy the highest level. © 2013 Copyright Taylor and Francis Group, LLC.

Survey of the nutritional recommendations and management practices adopted by feedlot cattle nutritionists in Brazil

Thirty-three feedlot cattle nutritionists were surveyed to evaluate the management practices and nutritional recommendations adopted by feedlots in Brazil. The web-based survey consisted of 81 questions that included: general information (n = 10); general commodity information (n = 15); use of coproducts (n = 5), roughage source and level (n = 5); adaptation methods (n = 7); feed mixers (n = 6); feeding management (n = 6); cattle management and type of cattle fed (n = 13); formulation practices (n = 9); information resources used for nutritional recommendations (n = 2); and additional questions (n = 3). In total, the 33 nutritionists were responsible for approximately 2,658,000 animals, and moreover, 65.5% of those participants had clients that feed less than 5000 animals yearly. Corn was the primary source of grain used in feedlot diets (87.9%) and cracking was the primary processing method recommended by nutritionists (57.6%). The average concentrate and roughage inclusion in finishing diets was 79.0% and 21.0%, respectively. The main challenges faced by nutritionists are the lack of available and precise equipment and lack of trained employees with respiratory diseases as the main health problem. This survey of nutrition and management practices should aid in the development of research for the feedlot industry in Brazil and similar tropical climates, as well as provide data to facilitate the broader application of future NRC models. (C) 2014 Elsevier B.V. All rights reserved.

Aedes aegypti proliferation in stormwater retained in Best Management Practices

The present study aimed to evaluate the risk of Aedes aegypti proliferation in structures used in compensatory techniques for urban drainage (Best Management PracticesBMPs). These drainage structures are utilised to reduce flood peaks due to surface runoff, and they have been used in many countries. However, many of these structures have been designed to keep water surfaces exposed for a certain period of time, depending on the type of project. Exposed water surfaces may become an ideal environment for A. aegypti proliferation in tropical and subtropical areas where the rainy season occurs during the summer. Thus, data regarding the mosquito life cycle, consecutive rainfall pattern and emptying time of these structures were collected. A comparison of these data led to the evaluation of the associated risk of A. aegypti proliferation in BMP structures. The risk of mosquito proliferation ranged from 1.1% to 3.3%, depending on the rainfall pattern, A. aegypti life cycle phase and BMP activity.

Fertility Rates Following Fixed-Time Artificial Insemination in Dairy Heifers in a Practical Progesterone-Based Protocol

Background: In bovines, more efficient management practices are important for maximizing profitability. In order to increase the pregnancy rates in artificial insemination (AI) programs, several hormonal protocols were developed to synchronize the follicular wave and the moment of ovulation in beef and dairy cattle. In dairy cattle, detection of estrus can be difficult due to a number of factors including the incidence of silent estrus. Hormonal treatments designed to control both luteal and follicular function has permitting efficient synchronizations of time of ovulation. Thus, the AI can be performed in a large number of animals on a fixed schedule without the need for detection of estrus. Using these management techniques, the fixed-time artificial insemination (TAI) can overcome the problem of accurate estrus detection and help in reducing the incidence of repeat breeding. In addition, with TAI in cattle operations, it is possible to facilitate management practices and commercialization, and to reduce the time and semen wasting with animals inseminated at incorrect times. The investigation of practical and efficient TAI protocols is important for reducing the labor and animal handling of TAI in dairy cattle, as well as for increasing the profitability of the cattle management system. This study was carried out in order to investigate the effectiveness of TAI in dairy heifers treated with a practical progesterone-based protocol.Materials, Methods & Results: This experiment was conducted at the university farm located in southwestern Brazil, during May 2009. Thirty-nine cycling crossbred dairy heifers were employed in this study. All animals received a single intramuscular injection of estradiol benzoate and intravaginal progesterone releasing device in a random stage of the estrous cycle (Day 0). on day 7 the animals were treated with PGF2a analogue and on day 9 the device was removed. Forty-eight hours after the device removal (day 11) a synthetic analogue of GnRH was administered and the animals were fixed-time artificially inseminated at the time of GnRH injection. The inseminations were performed using four different batches from the same Holstein bull. Among the heifers that were synchronized (87.2%), 30.8% ovulated until 24 h after TAI and 56.4% ovulated between 24 and 32 h after TAI. The conception rate was 61.5%. No effects of ovulation time in conception rates were detected. The conception rate from heifers that ovulated until 24 h after TAI was 58.3% and from heifers that ovulated between 24 and 32 h after TAI was 77.3%. The mean of ovulatory follicle in heifers that ovulated until 24 h was 14.3 mm and in heifers that ovulated between 24 and 32 h was 11.9 mm.Discussion: Taking together, the findings of the present study, along with those of others, emphasize the concept that development of practical methods for TAI offers significant advantages to dairy producers if conception rates are close or greater to those obtained after breeding at detected estrus. Thus, the results of the present study reinforce the possibility of making dairy cattle production more cost-effective using TAI. In conclusion, with the progesterone-based TAI protocol of the present experiment all synchronized animals ovulated up to 32 h after GnRH+TAI and no effects of ovulation time related to conception rate was detected. The exogenous control of luteal and follicular development facilitated the reproductive management and animal handling. Also, inseminating the heifers at the moment of GnRH injection in a progesterone-based TAI protocol is a practical strategy and provided satisfactory results regarding ovulation and conception rates in dairy heifers.

Viabilidade econômica de manejos nutricionais na cultura de banana

O manejo adequado da adubação, visando à otimização da produtividade e qualidade dos frutos, é uma etapa representativa do processo produtivo para rentabilidade do empreendedor rural. Neste contexto, objetivou-se analisar a viabilidade econômica de cinco tipos de manejo nutricional de bananeiras de cultivares do subgrupo Cavendish, na região do Médio Paranapanema (SP), em 2009/2010. Foram utilizadas estruturas do custo operacional efetivo (COE) e custo operacional total (COT) e três indicadores de rentabilidade. Diferenças significativas foram observadas entre os manejos, sendo que o sistema de manejo que resultou em maior vantagem econômica para o produtor proporcionou índice médio de lucratividade 25,6% superior aos demais tratamentos, além de a receita líquida total ser, em média, 29,5% superior aos outros tipos de manejo. O custo por unidade produzida foi inferior no manejo nutricional mais lucrativo, apesar de a produtividade ter sido 9,5% inferior ao manejo que apresentou os maiores índices de produtividade.

Environmental management in ethanol and sugarcane plants in Brazil

There has been much discussion on the importance of Brazilian ethanol in promoting a more sustainable society. However, there is a lack of analysis of whether sugarcane plants/factories that produce this ethanol are environmentally suitable. Thus, the objective of this study was to analyse stages of environmental management at four Brazilian ethanol-producing plants, examining the management practices adopted and the factors behind this adoption. The results indicate that (1) only one of the four plants is in the environmentally proactive stage; (2) all plants are adopting operational and organisational environmental management practices; (3) all plants have problems in communicating environmental management practices; and (4) the plant with the most advanced environmental management makes intense use of communication practices and is strongly oriented towards a more environmentally aware international market. This paper is an attempt to explain the complex relationship between the evolution of environmental management, environmental practices and motivation using a framework. The implications for society, plant directors and scholars are described, as well as the study's limitations.

Relationship between green management and environmental training in companies located in Brazil: A theoretical framework and case studies

The main objective of this study is to understand the relationship between green management and environmental training in Brazilian companies, underscoring how this relationship takes place and its most important factors. For such, 9 case studies were conducted at large ISO 14001 certified companies, leaders in their market segments. Several interviews were conducted for each case, documents were collected and visits were made for direct observation. The main contributions and results of this study were: (a) a proposal for a theoretical framework relating the evolutionary stages of green management and the characteristics of environmental training; (b) it was ascertained, as per the proposed theoretical framework, that organizational culture and teamwork, top management support and more technical green management practices are the factors that seem to connect and convert environmental training into more proactive green management, especially for companies in the proactive green management stage; (c) the identification of the co-evolution between the companies' stage of green management and their environmental training level, which is the identified relationship mechanism between environmental training and green management. In other words, the higher the level of adoption of activities recommended for green management, the more evolved the green management practiced at the companies tends to be; and (d) identification that the proposed theoretical framework tends to be useful, mainly because it can explain the relationship between green management and environmental training at the company in the proactive stage. (C) 2012 Elsevier B.V. All rights reserved.