Análise da variabilidade genética de acessos dePsidium spp. (Myrtaceae) avaliados quanto à reação a Meloidogyne enterolobii

This study aimed to characterize molecular of 13 accessions of Psidium spp. (Myrtaceae) that was been identified for the reaction to rootknot guava nematode. The DNA extraction of the samples was carried according to the protocol of Shillito & Saul (1988). The molecular markers type fAFLP, were obtained from fAFLP Regular Plant Genomes Fingerprinting Kit' (Applied Biosystems from Brasil Ltda.) and were tested 24 selectives combinations of primers, of which 18 showed amplification that produced 272 polymorphic markers. To the analysis of the markers were employed the softwares GeneScan (ABI Prism versao 1.0) and Genotyper (ABI Prism version 1.03), and the data collected were transformed into a binary matrix that was analyzed in the software PAUP (Phylogenetic Analysis Using Parcimony - version 3.01). Were calculated genetic distance index intra and interespecific between the genotipes. It was found that the AFLP markers were efficient in the discrimination between accessions, as well as in showing genetic similarity among accessions identified as resistant to the nematode Meloidogyne enterolobii, which could be discussed in the future.

Avaliação de volumes de calda proporcionados por diferentes pontas de pulverização no controle de Tuta absoluta (Meirick, 1917) (Lepidoptera: Gelechiidae) em tomate rasteiro

O objetivo deste trabalho foi avaliar o controle da traça-do-tomateiro em função dos volumes de aplicação. O levantamento da infestação da praga foi realizado avaliando-se o número de lagartas e de lesões com e sem lagarta viva e o número de ovos em folhas e frutos. Os tratamentos realizados foram o inseticida chlorfluazuron na dosagem de 80 mL p.c. 100 L-1, aplicado com as pontas: TJ6011002, TJ6011004, TX04VK e TX12VK cada uma utilizando, respectivamente, o volume de calda de: 200, 600, 200 e 600 L ha-1; e o pulverizador costal motorizado (100 L ha-1); todos com e sem o adjuvante polioxietileno alquil fenol éter (1 mL 10 L-1 de água) e mais uma testemunha. Verificou-se que os tratamentos com e sem adjuvantes não diferiram entre si. Porém, houve diferença entre os volumes utilizados, sendo menor a ocorrência de lesões nas parcelas tratadas com o volume de 600 L ha-1 . Houve também diferença em relação ao uso do adjuvante para o volume de 200 L ha-1 , sendo que o número de ovos foi superior sem a sua utilização. Neste trabalho, foi observada a importância do monitoramento no controle de pragas.

Crescimento micelial in vitro de cinco linhagens de Agaricus bisporus submetidas a diferentes condições de temperatura

Avaliou-se o crescimento micelial in vitro das linhagens ABI-05/03, ABI-06/04, ABI-04/02, ABI-06/05 e ABI-01/01 de Agaricus bisporus em meios de cultura sólidos à base de composto. As avaliações foram realizadas por meio de medições de quatro diâmetros das colônias, a cada 48h, durante 12 dias de incubação, no escuro, a 20 e 25ºC. O delineamento experimental foi o de blocos casualizados, com uso do teste de Tukey para a comparação das médias. Co m base nos resultados obtidos, verificou-se que: o crescimento micelial de A. bisporus é influenciado pela temperatura de incubação; a temperatura de 25ºC foi mais favorável para o crescimento micelial de todas as linhagens de A. bisporus; na temperatura de 20ºC, o melhor crescimento foi obtido com as linhagens ABI-06/05 e ABI-01/01; na temperatura de 25ºC, a linhagem ABI-01/01 apresentou crescimento significativamente maior que todas as demais.

Diversidade genética em populações-núcleo de Eucalyptus grandis

No melhoramento genético de espécies florestais, uma população base ou indivíduos superiores pré-selecionados tem importância fundamental para a manutenção do programa. Indivíduos de melhores procedências e de ampla base genética propiciam a obtenção de ganhos de forma contínua. O objetivo deste trabalho foi avaliar a diversidade genética em duas populações-núcleo de Eucalyptus grandis. Foram avaliados 39 indivíduos, sendo 19 pertencentes à população 1 e 20, à população 2, utilizando-se 14 primers microssatélite. Os fragmentos foram identificados e analisados a partir dos programas GeneScan e Genotyper, utilizando-se um sequenciador automático ABI Prism 3100. O número de alelos encontrados para cada primer variou de cinco a 15 para a população 1 e, de 8 a 18 para a população 2. A heterozigosidade estimada foi maior na população 2, 0,869, contra 0,843 na população 1. A média da distância genética entre os indivíduos da população 1 foi 0,6220 e na população 2 foi 0,6112. Com a caracterização molecular dos indivíduos destas populações foi construído um banco de dados que permitirá, a partir dos parâmetros de genética de populações, monitorar esses programas de melhoramento em diferentes ciclos de seleção.

Extrinsic compression of popliteal artery in asymptomatic athlete and non-athlete individuals - A comparative study using duplex scan (color duplex sonography)

Aim. Extrinsic compression of the popliteal artery and absence of surrounding anatomical abnormalities characterize the functional popliteal artery entrapment syndrome (PAES). The diagnosis is confirmed to individuals who have typical symptoms of popliteal entrapment and occlusion or important stenosis of the popliteal artery with color duplex sonography (CDS), magnetic resonance imaging (MRI) or arteriography during active plantar flexion-extension maneuvers. However, variable result findings in normal asymptomatic subjects have raised doubts as to the validity of these tests. The purpose of this study was to compare the frequency of popliteal artery compression in 2 groups of asymptomatic subjects, athletes and non-athletes.Methods. Forty-two individuals were studied. Twenty-one subjects were indoor soccer players, and 21 were sedentary individuals. Physical activity was evaluated through questionnaires, anthropometric measurements, and cardiopulmonary exercise test. Evaluation of popliteal artery compression was performed in lower limbs with CDS, ankle-brachial index (ABI) measurements and continuous wave Doppler of the posterior tibial artery.Results. The athletes studied fulfilled the criteria of high level of physical activity whereas sedentary subjects met the criteria of low level of activity. Popliteal artery compression was observed with CDS in 6 (14.2%) studied subjects; 2 of whom (4.7%) were athletes and 4 (9.5%) were non-athletes. This difference was not statistically significant (p=0.21). Doppler of the tibial arteries and ABI measurements gave good specificity and sensibility in the identification of popliteal artery compression.Conclusion. The frequency of popliteal artery compression during maneuvers in normal subjects was 14.2% irrespective of whether or not they performed regular physical activities. Both Doppler and ABI showed good agreement with CDS and should be considered in screening popliteal arteries in individuals suspected of PAES.

Helicobacter pylori and EBV in gastric carcinomas: Methylation status and microsatellite instability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Polymorphisms in the AR and PSA Genes as Markers of Susceptibility and Aggressiveness in Prostate Cancer

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Microallelotyping defines novel regions of loss of heterozygosity in uterine leiomyomas

Uterine leiomyomas are extremely common, benign, smooth muscle tumors that represent a significant public health problem. Although there have been few molecular studies of uterine leiomyomas, most of them have reported a very low frequency of loss of heterozygosity (LOH) in different regions of the genome. The detection of LOH has been used to identify genomic regions that harbor tumor suppressor genes and to characterize different tumor types. We have used a set of 15 microsatellite polymorphism markers to examine the frequency of allele loss in a panel of 64 human uterine leiomyomas matched to normal DNAs. The markers were chosen from regions involved in losses identified by comparative genomic hybridization in a subset of uterine leiomyomas described in a previous report. DNA from tumors and normal tissue was amplified by the polymerase chain reaction and subsequently analyzed using an ABI Prism 377 DNA automated sequencer. The frequency of LOH observed was low, except for the markers D15S87 (15q26.3), D7S493 (7p15.3), and D7S517 (7p22.2). No changes in microsatellite size were detected in our samples. These results provide useful clues for identifying putative tumor suppressor genes associated with a subset of uterine leiomyomas. (C) 2004 Wiley-Liss, Inc.

Progression of experimental chronic peri-implantitis in dogs: Clinical and radiographic evaluation

Background: the aim of this study was to evaluate the progression of experimental peri-implantitis in dogs using implants with different surface coatings.Methods: Thirty-six dental implants with four different surface coatings, commercially pure titanium (cpTi), titanium plasma-sprayed (TPS), hydroxyapatite (HA), and acid-etched (AE), were placed in six mongrel dogs. Five months after implantation, peri-implantitis was induced by cotton ligatures to facilitate plaque accumulation for 60 days. After 60 days, the ligatures were removed and supragingival plaque control was initiated for 12 months. Probing depth (PD), clinical attachment level (CAL), vertical bone level (VBL), horizontal bone level (HBL), and mobility were obtained at baseline, and 20, 40, 60 (acute phase), and 425 days (chronic phase) after ligature removal.Results: PD and CAL changed around all implant surfaces after ligature placement (P < 0.0001). However, the means of PD and CAL were not statistically significant among the different surfaces (P > 0.05). The range of CAL variation, calculated between baseline and 60 days (acute phase) and between 60 and 425 days (chronic phase), decreased (P < 0.05). Bone loss increased during the entire experiment (P < 0.0001). The HA surface showed the greatest bone loss measurement (5.06 +/- 0.38 mm) and the TPS showed the smallest bone loss (4.27 +/- 0.62 mm). However, statistical significance was not assessed for different coatings (P > 0.05).Conclusions: the clinical data at the initial phase showed rapid and severe peri-implant tissue breakdown. However, removal of ligatures did not convert the acute destructive peri-implant phase to a non-aggressive lesion and the progression of peri-implantitis was observed at chronic phase. The,experimental peri-implantitis in dogs may be a useful model to evaluate the progression of peri-implantitis.

A scanning electron microscopy study of diseased root surfaces conditioned with EDTA gel plus Cetavlon after scaling and root planing

In the present investigation, a scanning electron microscopy analysis was performed to evaluate the effects of the topical application of ethylenediaminetetraacetic acid (EDTA) gel associated with Cetavlon (EDTAC) in removing the smear layer and exposing collagen fibers following root surface instrumentation. Twenty-eight teeth from adult humans, single rooted and scheduled for extraction due to periodontal reasons, were selected. Each tooth was submitted to manual (scaling and root planing) instrumentation alone or combined with ultrasonic instruments, with or without etching using a 24% EDTAC gel. Following extraction, specimens were processed and examined under a scanning electron microscope. A comparative morphological semi-quantitative analysis was performed; the intensity of the smear layer and the decalcification of cementum and dentinal surfaces were graded in 12 sets using an arbitrary scale ranging from 1 (area covered by a smear layer) to 4 (no smear layer). Root debridement with hand instruments alone or combined with ultrasonic instruments resulted in a similar smear layer covering the root surfaces. The smear layer was successfully removed from the surfaces treated with EDTAC, which exhibited numerous exposed dentinal tubules and collagen fibers. This study supports the hypothesis that manual instrumentation alone or instrumentation combined with ultrasonic instrumentation is unable to remove the smear layer, whereas the subsequent topical application of EDTAC gel effectively removes the smear layer, uncovers dentinal openings and exposes collagen fibers.

Influence of root-surface conditioning with acid and chelating agents on clot stabilization

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Shear Bond Strength of Different Repair Systems to Titanium After Water Aging

This study evaluated the shear bond strength (SBS) and stability of commercially pure titanium (CP Ti)/repair material interfaces promoted by different repair systems. One hundred CP Ti cast discs were divided into five repair system groups: 1) Epricord (EP); 2) Bistite 11 DC (BT); 3) Cojet (CJ); 4) Scotchbond Multi-Purpose Plus (SB) (control group); and 5) Cojet Sand plus Scotchbond Multi-Purpose Plus (CJSB). The specimens were stored in distilled water for 24 hours at 37 degrees C, thermal cycled (5000 cycles, 5 degrees-55 degrees C) and stored under the same conditions for either 24 hours or six months (n=10). SBS was tested and the data were analyzed by two-way analysis of variance (ANOVA) and Tukey test (alpha=.05). Failure mode was determined with a stereomicroscope (20x). The repair system, storage time, and their interaction significantly affected the SBS (p<0.001). At 24 hours, CJSB exhibited the highest SBS value, followed by CJ. At six months, these two groups had similar mean SBS (p>0.05) and higher means in comparison to the other groups. For both storage times, BT presented the lowest SBS, while the EP and SB groups did not differ significantly from one another (p>0.05). There were no significant differences in SBS between the storage times for the groups EP and CJ (p>0.05). The groups BT, SB, and CJSB showed 100% adhesive failure, irrespective of storage time. The CJSB group showed the highest SBS at both storage times. At six months, the CJ group exhibited a similar SBS mean value when compared to the CJSB group. Water storage adversely affected the groups BT, SB (control group), and CJSB. Considering SBS values, stability, and the failure mode simultaneously, the CJ group showed the best CP Ti repair performance.

EFFECT of DIFFERENT AIRBORNE-PARTICLE ABRASION/BONDING AGENT COMBINATIONS on THE BOND STRENGTH of A RESIN CEMENT TO A BASE METAL ALLOY

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

THE EFFECT of DIFFERENT SURFACE TREATMENTS on THE SHEAR BOND STRENGTH of LUTING CEMENTS TO TITANIUM

Statement of problem. Although titanium presents attractive physical and mechanical properties, there is a need for improving the bond at the titanium/luting cement interface for the longevity of metal ceramic restorations.Purpose. The purpose of this study was to evaluate the effect of surface treatments on the shear bond strength (SBS) of resin-modified glass ionomer and resin cements to commercially pure titanium (CP Ti).Material and methods. Two hundred and forty CP Ti cast disks (9.0 x 3.0 mm) were divided into 8 surface treatment groups (n=30): 1) 50 mu m Al2O3 particles; 2) 120 mu m Al2O3 particles; 3) 250 mu m Al2O3 particles; 4) 50 mu m Al2O3 particles + silane (RelyX Ceramic Primer); 5) 120 mu m Al2O3 particles + silane; 6) 250 mu m Al2O3 particles + silane; 7) 30 mu m silica-modified Al2O3 particles (Cojet Sand) + silane; and 8) 120 mu m Al2O3 particles, followed by 110 mu m silica-modified Al2O3 particles (Rocatec). The luting cements 1) RelyX Luting 2; 2) RelyX ARC; or 3) RelyX U100 were applied to the treated CP Ti surfaces (n=10). Shear bond strength (SBS) was tested after thermal cycling (5000 cycles, 5 degrees C to 55 degrees C). Data were analyzed by 2-way analysis of variance (ANOVA) and the Tukey HSD post hoc test (alpha=.05). Failure mode was determined with a stereomicroscope (x20).Results. The surface treatments, cements, and their interaction significantly affected the SBS (P<.001). RelyX Luting 2 and RelyX U100 exhibited similar behavior for all surface treatments. For both cements, only the group abraded with 50 mu m Al2O3 particles had lower SBS than the other groups (P<.05). For RelyX ARC, regardless of silane application, abrasion with 50 mu m Al2O3 particles resulted in significantly lower SBS than abrasion with 120 mu m and 250 mu m particles, which exhibited statistically similar SBS values to each other. Rocatec + silane promoted the highest SBS for RelyX ARC. RelyX U100 presented the highest SBS mean values (P<.001). All groups showed a predominance of adhesive failure mode.Conclusions. The adhesive capability of RelyX Luting 2 and RelyX U100 on the SBS was decisive, while for RelyX ARC, mechanical and chemical factors were more influential. (J Prosthet Dent 2012;108:370-376)

Efficacy of Air-abrasion Technique and Additional Surface Treatment at Titanium/Resin Cement Interface

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)