Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Avaliação de efeitos toxicológicos e comportamentais de ginseng panax em ratos

Panax ginseng CA Meyer (Araliaceae) is a herbaceous plant widely used in China, South Korea, Japan and other Asian countries for the treatment of various diseases micro circulatory, cerebrovascular, among others, representing one of the drugs used by older man. It has over 30 biologically active ginsenosides with different pharmacological and behavioral effects and inhibitory effect on the NMDA receptor. The amino acid glycine is a co-agonist of the NMDA receptor, activating this receptor. At the cellular level, ketamine is widely known to be NMDA receptor antagonist. The aim of this study was to evaluate the general activity in the open field, and anxiety in elevated plus maze, mice treated with P. ginseng compared with the action of ketamine and glycine, to better understand the action of this herbal medicine at the NMDA receptor. We used 66 adult male rats were divided into six groups: a positive control, treated for 30 days with water by gavage, who received glycine (500mg/kg; po) on days 7, 14, 21 and 28 of treatment, one hour before of behavioral assessment, a negative control was treated for 30 days with water by gavage received ketamine (5mg/kg, ip) on days 7, 14, 21 and 28 of treatment, one hour prior to behavioral evaluation, three experimental groups, receiving 100, 200 or 300 mg / kg P. ginseng by gavage for 30 days and one group treated solely with white water, and is also administered 1 ml of water by gavage one hour prior to behavioral evaluation. Animal behavior in these three groups was also examined on days 7, 14, 21 and 28 of treatment. On day 30 of treatment, the animals were anesthetized with thiopental (70mg/kg) for blood collection and after euthanasia, withdrawal of various organs. There were no changes in weight and body weight gain and weight reasons in organ / body weight. However the consumption of water and food values showed a significant increase. Serum levels of AST was increased in a dose-dependently in the animals treated with doses of P. ginseng, glycine and ketamine as compared to the blank group. Unlike creatinine levels proved to be decreased in all treated groups when compared with white. However, the level of urea in these groups was reduced and no changes were observed in the ALT parameter. Histopathological examination revealed no changes in cell morphology in different tissues. There were no behavioral changes in the elevated plus maze and few changes were observed in the open field, animals treated with P. ginseng, glycine and ketamine when compared to white. These data suggest that the doses of P. ginseng employed were unable to induce general toxicity in rats treated for 30 days and also shows that the general behavior of mice treated with P. ginseng was slightly different from that observed in animals treated with ketamine and glycine. Finally, the study on the elevated plus maze showed that the extract of P. ginseng showed no anxiolytic or anxiogenic action

A desistência de alunos na licenciatura em física no Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN): causas e sugestões para o combate

This dissertation proposes studying the issue of withdrawal undergraduate in physics at the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN) and collaborate with suggestions for dealing with this problem. The first chapter begins with an overview of two significant problems in the Brazilian educational system: the high dropout rates in degrees in physics and the lack of teachers with specific training in this science. Then, we discuss the relevance of this research to the area of physics teaching, as well as justify its completion as part of a professional master's degree. After, we present a proper definition for the term withdrawal, which is based on the existing problem in the IFRN. And, in the same chapter, we explicitly the focus, the objectives and the methodological aspects of this work. The results obtained in our investigation are presented in next four chapters. In the second chapter of this dissertation, we present: a brief history of the creation of IFRN degree in physics, the functioning of this course and the foundation of classrooms 2004.2 and 2006.1. We also show a kind of map of the withdrawal of the groups investigated (the dropout rate was 84.4% in both groups) and an analysis of the relationship between the curricula of each of them and the number of dropouts. In the third chapter, we display a descriptive statistics of the students which dropout and found that the largest dropout occurred with students who are women, married, parents of one kid; workers, joined with a minimum age of 23 years and completed high school at least 6 years. Then in the fourth chapter, we reveal and discuss the students' reports on the causes of their dropout. From the data presented, we can say that the answer to the question "What was the main reason for your dropout?" Is mainly in personal injury claims: another option for upper-level course and lack of time to devote to the course. In the fifth chapter, we show the results related to teacher s opinions about the phenomenon in question. We detected three main causes for the abandonment, according to teachers: the lack of dedication, the lack of interest and lack of integration in the course. In the sixth and final chapter, we discuss the results and present our conclusion and the proposed report - the product of this dissertation, presented as Annex. This report contains mainly suggestions for curricular and institutional actions that can contribute to reducing the dropout degree in Physics in the IFRN. The main actions suggested are: implementation of the curriculum in disciplines, implementation of programs or actions to combat this poor content of basic training, implementation of specific programs or actions for the student worker, and dissemination of IFRN degree in physics in schools through seminars or workshops

Caracterização comportamental e avaliação da qualidade de leite em caprinos da raça saanen no semiárido nordestino

Goats are social animals which groups are organized from dominance hierarchies, established by agonistic behaviors. The quality and productivity of the goat s milk can be influenced by the dominance hierarchy. In this context, the objectives of our work were describe the social and food behavior of Saanen goats in a semi-extensive production system; characterize the social organization from the assessment of dominance hierarchies in two seasonal periods and correlate the physicochemical quality of the goats milk according hierarchical position. The experiment was conducted in the EMPARN s experimental station, located in the district of Cruzeta/RN. We utilized 17 multiparous goats of the Saanen race, with different age and weight. The observations were performed in precipitation and drought phases. The scan method recorded the trough permanence and agonistic interactions by method "all occurrences" in the pasture the alimentary behaviors of eat, ruminate on foot, ruminate lying, leisure on foot, leisure lying and walk, by the focal animal sampling method. The goats milk was submitted to analyzes of: density, protein, fat, lactose, CSS and total solids. The animals spend most of the time feeding themselves, and the activities that demand greater energy expenditure are done in the morning. The animals changed the hierarchical structure during the seasonal periods because of the withdrawal of some individuals of the group, having more aggressive behavior in the rainy season. The dominant animal the lowet production, the more CSS and the lesser fat, the goat in the middle of the hierarchy was the one that obtained the best production and quality. We conclude that the Saanen goats adapt to the environment and the conditions of the group to ensure better survival and its production is influenced by the internal dynamics of the group

Caracterização da comunidade bentônica do recife raso de Pirangi/RN, Brasil, e avaliação do seu processo de estruturação sob impacto de pisoteio

Despite being areas of socioeconomic and ecological importance, the reef environments in northeastern Brazil have been suffering with cluttered tourism impacts, such as trampling, activity that leads to decrease in abundance of organisms, especially benthic, and loss of biodiversity. The objectives of this study were 1) to characterize the benthic community in the shallow sandstone reef of Pirangi/RN, identifying patterns of zonation, and 2) evaluate its process of structuring under different degrees of impact of trampling, providing information to the proper use of the area. Data on abundance of organisms, the percentage coverage of the substrate and physic-chemical parameters were collected. The formation of two zones on the reef was observed: one that considers submerged areas and ones with shorter time of exposure, lower roughness and higher heterogeneity in the coverage of the substrate, with a predominance of sand, foliose algae, rodolit, being related to organisms such as gastropods, crabs and sea-urchin; the second zone comprises areas with longer time of exposure, greater roughness and predominance of bedrock uncovered, being associated with organisms such as barnacles, gastropods, bivalves and crabs. It is concluded that the studied reef presents its own zonation pattern, influenced by both the time of immersion and the substrate characteristics, such as roughness and type of coverage. To answer the second objective of this study, four experimental blocks were mounted on each of the three areas of different intensities of trampling, containing the following treatments: control (isolated from trampling), shaved isolated, trampling and shaved trampling, with data collection by 11 months. The data in abundance, diversity indices and living coverage of the substrate were compared between areas and treatments. The results showed that at the trampling areas, at the end of the experiment, differences were observed between the intensities of the impact, where higher values of abundance and richness of mobile fauna and richness of live coverage (ANOVA, p <0.05) were found in the area of higher trampling intensity. For fauna withdrawal of trampled scraped treatments, it was observed in the area of greatest impact that the abundance of small benthic invertebrates is more than three times smaller than that at the area of intermediate trampling (ANOVA, p <0.05). Initial isolated areas and final ones differed only as to the percentage of live coverage, with an increase of 35% at the end of this experiment. As for the areas that were completely scraped and isolated at the end of the experiment was observed an increase in the percentage of live coverage of 11.11% compared to the initial amount in the area of intermediate impact and 37.5% in the area with greater impact, indicating recovery of the area. It is suggested that the current use of the reef of Pirangi be reviewed, with a decentralization of trampling, or a decrease in visits, so that it does not occur at high intensities

Condições de trabalho e terceiro setor: implicações contemporâneas para o serviço social

In the contemporaneity, due to the implementation of the neoliberal project in which one verifies the withdrawal of the State in regard to the development of social policies, it is observed a new way of responding to the multifaceted expressions of the social issue, which is the emergence and expansion of a supposed "third sector" in society. Thus, the productive restructuring process has led to the deterioration of labor relations, as well as a super exploration of human labor power, also triggering structural unemployment. By being delineated in classist interests, the emergence of the "third sector" brings contradictory aspects to the society, one of these being the very concept of "third sector", more ideological than real. By seeking to answer the expressions of the social issue, demands the intervention of social workers in the institutions that "composes it". This way, arises the interest in researching what are the current conditions and labor relations of the social workers who work in the institutions of the "third sector" in Mossoró-RN. Therefore, this study is constituted by a survey for the conclusion of a Master's degree in Social Service at the Universidade Federal do Rio Grande do Norte. Therefore, it was listed out as general objective to identify and analyze the conditions and labor relations of the social workers entered in the institutions of the "third sector" in Mossoró-RN. And by specific objectives: to map the institutions that are part of the "third sector" in the city of Mossoró, which have social workers on its professional staff, in order to profile the same; and, analyze the main challenges presented to the work of the social worker in these institutions. We used the bibliographic and documental research to enlighten the knowledge of the topic approached and the development of the field research, in which for the analysis of the data obtained, through field research, it was used the quantitative and qualitative approach. The search results confirmed that half of the institutions was identified as philanthropics, and most of them are funded by the federal government and that such organizations develop activities in several areas, particularly health and welfare. Concerning the conditions and labor relations, was highlighted the fact that half of the professionals insert themselves within the institutions by appointment; regarding the salary, 57.1% of employees receive between 3 and 4 minimum wages, which is considered relatively low. Was satisfactory the analysis related to the labor rights, because almost all offer a formal contract, which ensures, in great measure, the effectuation of such rights. Now with regard to the workload, 5 of 6 institutions implemented the Law Nº. 12.317/2010 ensuring 30 hours a week for social workers. However, it were cited many challenges relating the reality of the "third sector" to the conditions and labor relations, among them stands out: the delay of salary and non-salary adjustment; the realization of activities that do not relate to professionals, functions and duties; the development of many activities by a single professional. Two important data are the not incentive to a postgraduate and the charging of the fulfillment of the goals for the professional productivity. Here, it is worth to reflect that, although this study presents elements that provide to identify some aspects of labor relations and conditions of social workers in the "third sector" in Mossoró- RN, as well as some challenges that permeate this space of professional insertion, is meant that there is much to be unveiled, and other studies can later do so in an attempt to a better understanding of the complexity of processes that permeate the "third sector"

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite