Caracterização de cerâmicas porosas de alumina reforçada com zircônia produzidas pelo método da réplica

Porous ceramics have many applications: thermal insulation, catalytic support, materials to fire protection, filters, and others. There are many techniques to production of ceramic filters. One technique to obtain ceramic filters is the replication method. This method consists in the impregnation of polymeric foam with ceramic slurry followed by a heating treatment that will burn out the organic elements and sintering of the material, resulting of a replication of the original foam. To perform their functions ceramic filters must satisfy mechanical requirements and permeability parameters (darcian k1 and no-darcian k2). The permeability and the strength of the ceramic material are dependent of the pore size and pore distribution. To the use at high temperatures the evaluation of mechanical properties in these temperatures is necessary. In this work the mechanical behavior of two commercial porous ceramics (10 and 40 poros per inch) was studied these materials were submitted to compression and four-point flexure test (room temperature, at 1000 °C, after thermal shock). Density and porosity measurements, permeability tests and microstructural analysis by scanning electronic microscopy (SEM) were realized. The Results showed that the decrease of mechanical strength of these materials, when submitted to thermal shock, occur for propagation of new cracks from cracks pre-existing and the permeability depends of the pore size

Desenvolvimento e teste de um modelo estatístico de identificação das proporções de água produzida em zonas de produção de um campo maduro de petróleo

This study investigates the chemical species produced water from the reservoir areas of oil production in the field of Monte Alegre (onshore production) with a proposal of developing a model applied to the identification of the water produced in different zones or groups of zones.Starting from the concentrations of anions and cátions from water produced as input parameters in Linear Discriminate Analysis, it was possible to estimate and compare the model predictions respecting the particularities of their methods in order to ascertain which one would be most appropriate. The methods Resubstitution, Holdout Method and Lachenbruch were used for adjustment and general evaluation of the built models. Of the estimated models for Wells producing water for a single production area, the most suitable method was the "Holdout Method and had a hit rate of 90%. Discriminant functions (CV1, CV2 and CV3) estimated in this model were used to modeling new functions for samples ofartificial mixtures of produced water (producedin our laboratory) and samples of mixtures actualproduced water (water collected inwellsproducingmore thanonezone).The experiment with these mixtures was carried out according to a schedule experimental mixtures simplex type-centroid also was simulated in which the presence of water from steam injectionin these tanks fora part of amostras. Using graphs of two and three dimensions was possible to estimate the proportion of water in the production area

Segmentação Fuzzy de Texturas e Vídeos

The segmentation of an image aims to subdivide it into constituent regions or objects that have some relevant semantic content. This subdivision can also be applied to videos. However, in these cases, the objects appear in various frames that compose the videos. The task of segmenting an image becomes more complex when they are composed of objects that are defined by textural features, where the color information alone is not a good descriptor of the image. Fuzzy Segmentation is a region-growing segmentation algorithm that uses affinity functions in order to assign to each element in an image a grade of membership for each object (between 0 and 1). This work presents a modification of the Fuzzy Segmentation algorithm, for the purpose of improving the temporal and spatial complexity. The algorithm was adapted to segmenting color videos, treating them as 3D volume. In order to perform segmentation in videos, conventional color model or a hybrid model obtained by a method for choosing the best channels were used. The Fuzzy Segmentation algorithm was also applied to texture segmentation by using adaptive affinity functions defined for each object texture. Two types of affinity functions were used, one defined using the normal (or Gaussian) probability distribution and the other using the Skew Divergence. This latter, a Kullback-Leibler Divergence variation, is a measure of the difference between two probability distributions. Finally, the algorithm was tested in somes videos and also in texture mosaic images composed by images of the Brodatz album

Influência da paridade, do tipo de parto e do nível de atividade física sobre a musculatura do assoalho pélvico em mulheres na pós-menopausa

The post-menopause stage is characterized by hormonal and organic alterations of ovarian failure. One of the most important of these is muscles alterations of the pelvic floor (MPF). According to current literature, in young women gynecological and obstetric factors, as well as lifestyles and habits influence that loss of function. However, there is still uncertainty about the influence of those variables in the MPF functions in post-menopause women. Thus, this study aimed at seeing if there is an influence from number of births, the type of birth and the level of physical activity on the MPF of post-menopause women. Another objective of this study was to compare MPF force in women who had had vaginal births with those who had been subjected to cesarean sections, those with different levels of physical activity and those with artificial and natural menopause in the initial and latter stages. Furthermore, the test of muscular force was compared to perineometry. Using observational, analytical and transversal observations, 100 women in the post-menopausal stage of life, between the ages of 45 and 65, were examined. They were divided according to the menopausal stage into three groups: women who had undergone hysterectomies, those in the initial stages of postmenopause and those in the late stage of postmenpause. The patients were questioned about social, demographic, gynecological and obstetric factors. All the volunteers were submitted to a physical examination where their height and weight were measured to arrive at the corporal mass index and their waist measurements were taken. The evaluation of the pelvic floor was conducted with muscular force tests and perineometry. These results were analyzed with statistical description and ANOVA statistical tests, multiple regression and Kolmogorov-Smirnov evaluations. The results showed homogeneity with regard to social demographic and anthropometric characteristics among the women in the final test sample (n=85). It was also seen that most of the women in all three groups were married (p=0.51) and catholic (p=0.13). The average per capital income varied between $R585.47 (+/-466.67) and $R1,271.83 (+/-1,748.95), with no significant difference between the groups (p=0.05). The G>6 group presented an average age between 58.95 (+/-3.96) which was significantly greater that the G<6 group´s average age (53.21+/- 3.88) (p=0.000). There was no difference between the groups´ anthropometric characteristics of weight (p=0.32), height (p=0.72) and corporal mass index (p=0.34), nor in the waist measurements (p=0.33). Furthermore, no significant difference was noted in the MPF function of women who had had normal births, cesarean sections or a combination of the two (TFM p=0.897; perineum measurement p=0.502). Likewise, no differences were seen in the MPF function of women who had one, two to three or four or more births (TFM p=0.28, perineum measurement p=0.13). Finally, no difference was perceived among those with different levels of physical activity (TFM p=0.663; perineum measurement p=0.741). Therefore, we found that the type of delivery, number of births and physical activity had no influence on the muscular function of the pelvic floor among the women studied. It is believed that decline in muscular function in post-menopause women is fundamentally related to the process of aging.