Análise de falhas em martelos oscilantes dos desfibradores da indústria sucroalcooleira da Região Norte-Nordeste

The failure of materials is always an unwelcome event for several reasons: human lives are put in danger, economic losses, and interference in the availability of products and services. Although the causes of failures and behaviour of materials can be known, the prevention of such a condition is difficult to be guaranteed. Among the failures, wear abrasion by the low voltage is the kind of failure that occurs in more equipment and parts industry. The Plants Sucroalcooleiras suffer significant losses because of such attrition, this fact that motivated their choice for the development of this work. For both, were considered failures in the swing hammers desfibradores stopped soon after the exchange provided in accordance with tonnage of cane processed, then were analyzed by the level of wear testing of rubber wheel defined by the standard ASTM G65-91.The failures were classified as to the origin of the cause and mechanism, moreover, were prepared with samples of welding procedures according to ASME code, sec. IX as well, using the technique of thermal spraying to analyze the performance of these materials produced in laboratories, and compares them with the solder used in the plant. It was observed that the bodies-of-proof prepared by the procedure described as welding, and the thermal spraying the results of losing weight have been minimized significantly compared to the preparations in the plant. This is because the use of techniques more appropriate and more controlled conditions of the parameters of welding. As for the thermal spraying, this technique has presented a satisfactory result, but requires the use of these coatings in the best condition for real affirmation of the results

Atividades educativas aos portadores de periodontite crônica: escuta e troca de saberes no autocuidado em saúde bucal

This research aimed at evaluating oral health education activities for Periodontitis carriers, emphasizing the motivation for self-care and understanding the cultural aspects involved. This was a qualitative and quantitative study. Based on the qualitative referential, 20 interviews were done, in which differences between scientific and popular explicative models of the health-illness process were verified, besides the increased knowledge and motivation in relation to the use of preventive measures and also the fails in the understanding of the chronic character of periodontitis, enhancing frustration and guilty feelings in the patients. Two groups were structured: intervention and control. The intervention group was submitted to clinical attendance and education activities, while the control group undergone the traditional clinical attendance only. The sample consisted of 51 participants of intervention group and 47 of control group. Structured interviews were conducted at the beginning and at the end of the treatment in order to evaluate the knowledge and motivation for self-care in both groups. For comparison between the previous and post moments in both groups, there were applied McNemar tests with a probability of p < 0.05. In intervention group there was an increase in knowledge related to the name, the causes and related factors of the disease (p < 0.05). In control group there wasn t a rise in the understanding of the diseases chronic character, unlike in intervention group. However, in what concerns self-care, a greatest frequency in medium and high scores was observed in both groups. By this study, it is conclude that there is a common sense knowledge about the importance of preventive techniques and poor oral health as causing periodontitis; clinical interventions for bearers of chronic Periodontitis do not add values to the patients, regarding the illness, its causes and its chronic character; popular beliefs stay in their imagination, and the patients have a increased motivational capacity for self-care

Apelação no código de processo civil: uma análise sob o prisma do princípio da efetividade

The present dissertation, elaborated is based on the deductive method, through the use of the General Theory of Resources concepts, by the main types of judgments existing in the Code of Civil Procedure, the interlocutory judgment and sentence, as well as the features and effects that challenge these decisions, we sought to identify on this theme one of the greatest evils facing the justice system in the world, which is the processing delays. This slowness in adjudication affects seriously the principle of effectiveness, one of the postulates of procedural law and society as a whole. Thus, the use of tort serves to fight the interlocutory decision and appeal which challenges the judge`s ruling. It is a resource for excellence in appellate system as it meets with the most awaited decision of the process. In weighing the importance of the appeal that seeks to oppose the court decision today by the numerous reforms that the procedural system has been through, it has ended up to transform the process ineffective or inconsistent, for it is much easier to have efficacy in a interlocutory decision for preliminary injunction than by judgment on the merits of the judge. This is due to the prevision of the resources and their effect to those decisions. That is, the interlocutory decision involves interlocutory appeal only in the devolved effect, allowing its provisional execution, and the sentence has as recourse to appeal the double effect, remanding and suspension, which necessarily prevents its provisional execution. But it undeniably shows a paradox, because as to give effect to a measure that is based on a mere probability by a summary cognition, partial and superficial, and stop it on a decision by a court that is closer to the truth and sure, for a full and depleting cognition? It is seriously affect the principle of effectiveness. Therefore, starting from this ineffectiveness, sought to defend the solution of this problem with the approval of the bill n. º 3.605/2004 or the new Code of Civil Procedure project that modifies the general rule the effects of appeal. That is, remanding and suspensive, as to merely remanding effect to and thereby enable the provisional execution of the judgment of the court of the first degree of jurisdiction, giving effectiveness and enhancing the decision of the magistrate, making a fair distribution of time in the process and better guaranteed principle of access to justice

Uso da tecnologia de troca iônica no tratamento de águas contaminadas com Nitrato do Aqüífero Dunas-Barreiras, Natal/RN-Brasil

The city of Natal comprises an area of about 170 km² (65,63 squares miles). The Dunas-Barreiras Aquifer is the most important reservoir of the coastal basin of RN. It is being responsible for the water supplying of about 70% of the population, however, due to the sewage disposal system by cesspools and drains, it is presently affected in a great extent by nitrates contamination. Thus, the present work proposes to research the utilization of contaminated water by nitrates of this fountainhead and find cost of the potable water through the ionic exchange technology. This technology consists in the removal of mineral salts by the exchange of cations for one ion of hydrogen (H+), through the passage of water by cationic resin bed and, secondly, by the exchange of the anions for hydroxyl ions (OH-) through a anionic resin bed. The obtained results have showed the waters derived from fountains, big water holes and shallow wells were microbiologically contaminated, while the waters derived from deep wells (above 70 m 76,58 yards) were free of contamination. Thus, only these ones are suitable to the use of ionic technology. The experiments were conducted with the resin IMAC-HP-555 such as kinetic, thermodynamic, and adsorption by fixed bed studies, being obtained several project variables for the experimental column, as follow: work temperature of 25oC; resin maximum capacity maximum e mean of adsorption ==0,01692 g NO3-1/g R e 0,0110 g NO3-1/g R, respectively. On the experimental column were performed breakthrough tests which pointed for an average ideal average speed of work of 13.2 m / h, with an average efficiency of 45% of adsorption, an optimal concentration of NaCl desorption of 8%, and an ideal desorption time of 80 minutes for the equilibrium conditions of water from the Dunas-Barreiras aquifer. Scale projection for ion-exchange column for denitrification, for these variables, using a computer modeling programme, to project the column of ion exchange ROREX-420/2000, obtained a cost for the drinking water denitrified by this system of R$ 0,16 / m3

Recuperação e purificação de proteínas do soro de queijo tipo coalho usando cromatografia de troca iônica e interação hidrofóbica em leito na forma expandida

Expanded Bed Adsorption plays an important role in the downstream processing mainly for reducing costs as well as steps besides could handling cells homogenates or fermentation broth. In this work Expanded Bed Adsorption was used to recover and purify whey proteins from coalho cheese manufacture using Streamline DEAE and Streamline SP both ionic resins as well as a hydrophobic resin Streamline Phenyl. A column of 2.6 cm inner diameter with 30 cm in height was coupled to a peristaltic pump. Hydrodynamics study was carried out with the three resins using Tris-HCl buffer in concentration of 30, 50 and 70 mM, with pH ranging from 7.0 to 8.0. In this case, assays of the expansion degree as well as Residence Time Distribution (RTD) were carried out. For the recovery and purification steps, a whey sample of 200 mL, was submitted to a column with 25mL of resin previously equilibrated with Tris/HCl (50 mM, pH 7.0) using a expanded bed. After washing, elution was carried out according the technique used. For ionic adsorption elution was carried out using 100 mL of Tris/HCl (50 mM, pH 7.0 in 1M NaCl). For Hydrophobyc interaction elution was carried out using Tris/HCl (50 mM, pH 7.0). Adsorption runs were carried out using the three resins as well as theirs combination. Results showed that for hydrodynamics studies a linear fit was observed for the three resins with a correlation coefficient (R2) about 0.9. In this case, Streamline Phenyl showed highest expansion degree reaching an expansion degree (H0/H) of 2.2. Bed porosity was of 0.7 when both resins Streamline DEAE and Streamline SP were used with StremLine Phenyl showing the highest bed porosity about 0.75. The number of theorical plates were 109, 41.5 and 17.8 and the axial dipersion coefficient (Daxial) were 0.5, 1.4 and 3.7 x 10-6 m2/s, for Streamline DEAE, Streamline SP and Streamline Phenyl, respectively. Whey proteins were adsorved fastly for the three resins with equilibrium reached in 10 minutes. Breakthrough curves showed that most of proteins stays in flowthrough as well as washing steps with 84, 77 and 96%, for Streamline DEAE, Streamline SP and Streamline Phenyl, respectively. It was observed protein peaks during elution for the three resins used. According to these peaks were identified 6 protein bands that could probably be albumin (69 KDa), lactoferrin (76 KDa), lactoperoxidase (89 KDa), β-lactoglobulin (18,3 KDa) e α-lactoalbumin (14 KDa), as well as the dimer of beta-lactoglobulin. The combined system compound for the elution of Streamline DEAE applied to the Streamline SP showed the best purification of whey proteins, mainly of the α-lactoalbumina

Uma abordagem na camada de middleware para troca dinâmica de componentes em sistemas multimídia distribuídos baseados no framework Cosmos

To manage the complexity associated with the management of multimedia distributed systems, a solution must incorporate concepts of middleware in order to hide specific hardware and operating systems aspects. Applications in these systems can be implemented in different types of platforms, and the components of these systems must interact each with the other. Because of the variability of the state of the platforms implementation, a flexible approach should allow dynamic substitution of components in order to ensure the level of QoS of the running application . In this context, this work presents an approach in the layer of middleware that we are proposing for supporting dynamic substitution of components in the context the Cosmos framework , starting with the choice of target component, rising taking the decision, which, among components candidates will be chosen and concluding with the process defined for the exchange. The approach was defined considering the Cosmos QoS model and how it deals with dynamic reconfiguration

MaRISA-AOCode: uma abordagem genérica para geração de código orientado a aspectos

Currently there are several aspect-oriented approaches that are related to different stages of software development process. These approaches often lack integration with each other and their models and artifacts are not aligned in a coherent process. The integration of Aspect-Oriented Software development (AOSD) and Model-Driven Development (MDD) enables automatic propagation of models from one phase to another, avoiding loss of important information and decisions established in each. This paper presents a model driven approach, called Marisa-AOCode, which supports the processing of detailed design artifacts to code in different Aspect-Oriented Programming languages. The approach proposed by Maris- AOCode defines transformation rules between aSideML, a modeling language for aspectoriented detailed design, and Metaspin, a generic metamodel for aspect-oriented programming languages. The instantiation of the generic metamodel (Metaspin) provided by the approach of Maris-AOCode is illustrated by the transformation of Metaspin for two languages: AspectLua and CaesarJ. We illustrate the approach with a case study based on the Health Watcher System

Estudo do fluxo de neutrino solar com o código evolutivo de Toulouse - Geneva

The study of solar neutrinos is very important to a better comprehension of the set of nuclear reactions that occurs inside the Sun and in solar type stars. The ux of neutrinos provides a better comprehension of the stellar structure as a whole. In this dissertation we study the ux of neutrinos in a solar model, addressing the neutrino oscillation, analyzing with the intention of determining and verify the distribution from a statistical point of view, since this ux depends on the particles intrinsic velocity distributions in stellar plasma. The main tool for this analysis was the Toulouse-Geneva Stellar Evolution Code, or TGEC, which allow us to obtain the neutrino ux values per reaction and per layer inside the Sun, allowing us to compare the observational results for the neutrino ux detected on experiments based on Cl37 (Homestake), Ga71 (SAGE, Gallex/GNO) and water (SNO). Our results show the nal distribution for neutrino ux as a function of the depth using the coordinates of mass and radius. The dissertation also shows that the equations for this ux are present in TGEC.