Qualidade de Vida, Saúde Geral e Ansiedade em pacientes com diferentes tipos e níveis de disfunção temporomandibular

Some studies reported in the literature that emotional factors and quality of life may be involved both in aetiology, as in the progression of Temporomandibular disorders (TMD). Proposition: The purpose of this study is to observe a possible association between different forms of anxiety, quality of life and general health of patients diagnosed as carriers of various types and levels of Temporomandibular Dysfunction. Methodology: The sample consisted of 60 patients diagnosed as carriers of TMJD origin of muscle, joint, or both, with different levels of severity (mild TMD, moderate and severe). The patients were diagnosed with TMD-RDC (Research Diagnostic Criteria) to assess the type of dysfunction (muscle or joint) and by the Protocol of Fonseca to verify the degree of dysfunction (mild, moderate or severe). To evaluate the psychosocial aspects were used three self-applied, with the purpose of obtaining information about the general health (General Health Questionnaire - GHQ), the type of anxiety (Trait Anxiety Inventory-State - STAI) and quality of life (World Health Organization Quality Of Life Short WHOQOL-brief). Results: There was a correlation between all indicators studied in several forms of TMD with varying degrees of commitment. Quality of life appeared linked to the type and the level of TMD: Muscular and Articular TMD (p = 0,037), Disk Displacement With Reduction (p = 0.01) and Mild TMD (p = 0.042). The General Health showed association with the level of TMD, with the exception of the stress factor (p = 0.78). For the analysis of the types and levels to Severe Muscular TMD had a statistically significant indicator of the quality of life (p = 0049). The anxiety only showed association with the level of TMD (p = 0,047 for anxiety-trait). Conclusion: Besides the limitations of the study, it was concluded that anxiety, quality of life and general health are important psychosocial indicators, which are linked to several forms of TMD in different levels of severity

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Avaliação do comportamento tribológico de compósitos poliéster/fibra de vidro utilizando resíduos de poliéster/fibra de vidro e carbonato de cálcio como carga

The use of composite materials and alternative is being increased every day, as it becomes more widespread awareness that the use of renewable and not harmful to the environment is part of a new environmentally friendly model. Since its waste (primarily fiberglass) can not be easily recycled by the difficulty that still exists in this process, since they have two phases mixed, a polymeric matrix thermoset difficult to recycle because it is infusible and phase of fiber reinforcements. Thermoset matrix composites like Polyester + fiberglass pose a threat due to excessive discharge. Aiming to minimize this problem, aimed to reuse the composite Polyester + fiber glass, through the wastes obtained by the grinding of knifes and balls. These residues were incorporated into the new composite Polyester/Fiberglass for hot compression mold and compared tribological to composites with filler CaCO3, generally used as filler, targeting a partial replacement of CaCO3 by such waste. The composites were characterized by thermal analysis (TGA, DSC and DMA), by the surface integrity (roughness determination, contact angle and surface energy), mechanical properties (hardness) and tribological tests (wear and coefficient of dynamic friction) in order to evaluate the effect of loads and characterize these materials for applications that can take, in the tribological point of view since waste Polyester + fiberglass has great potential for replacement of CaCO3

Treinamento muscular inspiratório para asma: revisão sistemática com metanálise

In asthmatic, the lung hyperinflation leaves the inspiratory muscle at a suboptimal position in length-tension relationship, reducing the capacity of to generate tension. The increase in transversal section area of the inspiratory muscles could reverse or delay the deterioration of inspiratory muscle function. Objective: To evaluate the evidence for the efficacy of inspiratory muscle training (IMT) with an external resistive device in patients with asthma. Methods: A systematic review with meta-analysis was carried out. The sources researched were the Cochrane Airways Group Specialised Register of trials, Cochrane Central Register of Controlled Trials (The Cochrane Library Issue 11 of 12, 2012), MEDLINE, EMBASE, PsycINFO, CINAHL, AMED, ClinicalTrials.gov and reference lists of articles. All databases were searched from their inception up to November 2012 and there was no restriction on the language of publication. Randomised controlled trials that involved the use of an external inspiratory muscle training device versus a control (sham or no inspiratory training device) were considered for inclusion. Two reviewers independently selected articles for inclusion, evaluated risk of bias in studies and extracted data. Results: A total of five studies involving 113 asthmatic patients were included. Three clinical trials were produced by the same group. The included studies showed a significant increase in maximal inspiratory pressure (MD 13.34 cmH2O, 95% CI 4.70 to 21.98), although the confidence intervals were wide. There was no statistically significant difference between the IMT group and the control group for maximal expiratory pressure, peak expiratory flow rate, forced expiratory volume in one second, forced vital capacity, sensation of dyspnea and use of beta2-agonist. There were no studies describing exacerbation events that required a course of oral and inhaled corticosteroids or emergency department visits, inspiratory muscle endurance, hospital admissions and days of work or school. Conclusions: There is no conclusive evidence in this review to support or refute inspiratory muscle training for asthma, once the evidence was limited by the small number of studies included, number of participants in them together with the risk of bias. More well conducted randomized controlled trials are needed, such trials should investigate respiratory muscle strength, exacerbation rate, lung function, symptoms, hospital admissions, use of medications and days off work or school. IMT should also be assessed in the context of more severe asthma

Efeito da crioterapia e da laserterapia na resposta ao dano muscular induzido pelo exercício excêntrico: ensaio clínico e randomizado

Exercise-induced muscle damage mainly affects individuals who returned to physical activity after a time without practicing it or had some kind of exhaustive exercise, particularly eccentric exercise. To evaluate the effect of cryotherapy and laser therapy in response to muscle damage induced by eccentric exercise on the biceps muscle. This was a randomized clinical trial consisting of 60 female subjects. All subjects initially underwent an evaluation consisting of perimetry, measurement of pain sensation (via algometry and visual analogue scale), electromyography and dynamometry. Then the subjects performed an exercise protocol on the isokinetic dynamometer consisting of 2 sets of 10 eccentric elbow flexors contraction at 60 °/s. Completed this protocol, an intervention was held according to a previously random group distribution: control group (no intervention), cryotherapy group and laser therapy group. Finally, subjects were re-evaluated immediately and 48 hours after the intervention protocol, except for Visual Analogue Scale (VAS), which was also evaluated 24 hours after exercise. The circumference of the limb, the pain sensation (VAS and algometry), the muscle activation amplitude (via Root Mean Square - RMS), median frequency, peak torque normalized per body weight, average peak torque, power and work were analyzed. The median frequency immediately after the intervention protocol on the cryotherapy group was the only variable that showed inter and intra-group differences; the remaining variables showed only intragroup differences. The perimetry values did not change immediately after the protocol on the groups which underwent cryotherapy and laser therapy, however, there was an increase after 48 hours; algometry values decreased in all groups for 48 hours and the VAS values increased 24 and 48 hours also for all groups. Regarding RMS no significant change was observed. For dynamometry, peak torque normalized per body weight and average peak torque had a similar behavior, with a reduction in the post protocol that has remained after 48 hours. For the power and work, a decrease was observed immediately after the protocol with a further reduction after 48 hours. Cryotherapy and laser therapy does not alter the muscle damage response, except for the perimetry values immediately after exercise.

Influência da paridade, do tipo de parto e do nível de atividade física sobre a musculatura do assoalho pélvico em mulheres na pós-menopausa

The post-menopause stage is characterized by hormonal and organic alterations of ovarian failure. One of the most important of these is muscles alterations of the pelvic floor (MPF). According to current literature, in young women gynecological and obstetric factors, as well as lifestyles and habits influence that loss of function. However, there is still uncertainty about the influence of those variables in the MPF functions in post-menopause women. Thus, this study aimed at seeing if there is an influence from number of births, the type of birth and the level of physical activity on the MPF of post-menopause women. Another objective of this study was to compare MPF force in women who had had vaginal births with those who had been subjected to cesarean sections, those with different levels of physical activity and those with artificial and natural menopause in the initial and latter stages. Furthermore, the test of muscular force was compared to perineometry. Using observational, analytical and transversal observations, 100 women in the post-menopausal stage of life, between the ages of 45 and 65, were examined. They were divided according to the menopausal stage into three groups: women who had undergone hysterectomies, those in the initial stages of postmenopause and those in the late stage of postmenpause. The patients were questioned about social, demographic, gynecological and obstetric factors. All the volunteers were submitted to a physical examination where their height and weight were measured to arrive at the corporal mass index and their waist measurements were taken. The evaluation of the pelvic floor was conducted with muscular force tests and perineometry. These results were analyzed with statistical description and ANOVA statistical tests, multiple regression and Kolmogorov-Smirnov evaluations. The results showed homogeneity with regard to social demographic and anthropometric characteristics among the women in the final test sample (n=85). It was also seen that most of the women in all three groups were married (p=0.51) and catholic (p=0.13). The average per capital income varied between $R585.47 (+/-466.67) and $R1,271.83 (+/-1,748.95), with no significant difference between the groups (p=0.05). The G>6 group presented an average age between 58.95 (+/-3.96) which was significantly greater that the G<6 group´s average age (53.21+/- 3.88) (p=0.000). There was no difference between the groups´ anthropometric characteristics of weight (p=0.32), height (p=0.72) and corporal mass index (p=0.34), nor in the waist measurements (p=0.33). Furthermore, no significant difference was noted in the MPF function of women who had had normal births, cesarean sections or a combination of the two (TFM p=0.897; perineum measurement p=0.502). Likewise, no differences were seen in the MPF function of women who had one, two to three or four or more births (TFM p=0.28, perineum measurement p=0.13). Finally, no difference was perceived among those with different levels of physical activity (TFM p=0.663; perineum measurement p=0.741). Therefore, we found that the type of delivery, number of births and physical activity had no influence on the muscular function of the pelvic floor among the women studied. It is believed that decline in muscular function in post-menopause women is fundamentally related to the process of aging.

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Barracas de Praia, praia de barracas: configuração, tipo e usos na praia do futuro, Fortaleza CE

The purpose of this dissertation is to analyse the importance of the huts of Praia do Futuro to their users and to the city of Fortaleza in Ceará through the comprehension of relations between morphological categories - in urban and edified contexts - of the establishments and their use patterns. This place is one of the main recreation and leisure areas of the city, formed by six kilometres of waterfront, corresponding to a differentiated area through the coast. This space has beach huts with varied profiles: while some more simple huts persist, great complexes are being developed, building even water parks on the beach area. This study analyses relations between:i) spatial configuration (in geometric and mainly topological terms) based on the Social Logic of Space; ii) edified typology (analysing capacity, landscap treatment and program of the huts); and iii) use and environmental perception of the beach by its frequenters. There are consistent relations between the type of hut and their localization in the urban grid, of which were identified groups with different patterns: segregated (north, central and south) and integrated (north: more integrated. and south: less integrated). Such relations also reflect, in varied patterns of use and environmental perception. In spite of their strong economy, the beach huts find themselves in a fragile legal situation because they occupy the beach area, so that this study may come to assist the decision-making for the future of the region. For a sustainable development of the area by those responsible and managers it is necessary to evaluate the cultural importance of the huts at Praia do Futuro, understanding their occupation and uses.

Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal - RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher

Padronização e flexibilidade: proposta de um edifício tipo para uma escola técnica profissionalizante

Nowadays the acquisition of sustainable elements and concepts in construction has been increasingly discussed, improved and incorporated to buildings, since the sector directly interferes in the urban space and environment, representing environmental impact. In order to make a sustainable building (Green Building) it is vital to incorporate less damaging constructive practice, starting from the project until the operation of the enterprise, that means to consider an integrated process of conception, implementation, construction and operation. The more effective sustainable principles participation in architecture happens at the projecting step through minimal environment impact solutions. Among the issues varieties that goes with sustainability proposal of the buildings project, there were added to this work the elements that are directly attached to bioclimatic architecture, more specifically the climate variation, ventilation, lighting and sunlight, that directly affect the project conception. It is important to put in evidence that architecture role goes far beyond the simple activity of building spaces; it is the sequence of political, economic, social and cultural elements, having the users as the main apparatus to its materialization. Thereby this professional dissertation consists of an architecture draft for a professional and technological school in the Rio Grande do Norte State, this dissertation is based on the analysis of previous experience and the bioclimatic principles that implicate in building on hot and dry, hot and humid climates, and the use of strategic solutions that aim the optimization of natural light and ventilation

Construção de modelos de interação in silico e in vitro do inibidor do tipo Kunitz de Adenanthera pavonina L. para as enzimas cisteínicas e serínicas

Serines proteinases inhibitors (PIs) are widely distributed in nature and are able to inhibit both in vitro and in vivo enzymatic activites. Seed PIs in than leguminous are classified in seven families, Bowman-Birk and Kunitz type families that most studied representing an important role in the first line of defense toward insects pests. Some Kunitz type inhibitors possess activities serine and cysteine for proteinases named bifunctional inhibitor, as ApTKI the inhibitor isolate from seed of Adenanthera pavonina. The A. pavonina inhibitor presenting the uncommon property and was used for interaction studies between proteinases serine (trypsin) and cysteine (papain). In order to determinate the in vitro interaction of ApTKI against enzymes inhibitor purification was carried cut by using chromatographic techniques and inhibition assays. The 3D model of the bifunctional inhibitor ApTKI was constructed SWISS-MODEL program by homology modeling using soybean trypsin inhibitor (STI, pdb:1ba7), as template which presented 40% of identity to A. pavonina inhibitor. Model quality was evaluated by PROCHECK program. Moreover in silico analyzes of formed complex between the enzymes and ApTKI was evaluated by HEX 4.5 program. In vitro results confirmed the inhibitory assays, where the inhibitor presented the ability to simultaneously inhibit trypsin and papain. The residues encountered in the inhibitor model of folder structural three-dimensional that make contact to enzymes target coud explain the specificity pattern against serine and cysteine proteinases

Purificação, caracterização e avaliação da atividade antiproliferativa de um inibidor de quimotripsina tipo kunitz de semente de Eryhrina velutina

A chymotrypsin inhibitor was purified from Erythrina velutina seeds by ammonium sulphate fractionation, affinities chromatographies on Trypsin-Sepharose, Quimotrypsin-Sepharose and reversed phase C-18 FPLC/AKTA system. The inhibitor, named EvCI, shown molecular mass of 17 kDa, as determined by SDSPAGE. 2D-PAGE showed four isoinhibitors with pI values of 4,42, 4,63, 4,83 and 5,06, with molecular mass of 17 kDa each. The aminoacid sequence of EvCI was determined by MALDI-TOF-MS and showed a high similarity with other Kunitz-type inhibitor of Erythrina variegata. EvCI competitively inhibited chymotrypsin, with Ki of 4 x10-8 M, but did not inhibited trypsin, pancreatic elastase, bromelain and papain. The inhibitory activity of EvCI was stable over wide pH and temperature ranges. In the presence of DTT 100 mM for 120 min, EvCI lost 50 % of activity. Cytotoxicity was studied in HeLa, MDA, HepG2, K562 and PC3 cells after 72-h incubation period. EvCl inhibited HeLa cells growth with an IC50 value of 50 μg/ml. Subsequent studies in HeLa cells analysis of cell death by annexin V/PI double-staining and cell cycle, using flow cytometry. The results provide evidence for a cytostatic activity of EvCl and support further studies on potential application of this inhibitors as an antiproliferative agent in combined therapy against cervical cancer

Avaliação do efeito do composto tipo heparina isolado do caranguejo Chaceon fenneri na hemostasia e na morte celular

Heparin is a pharmaceutical animal widely used in medicine due to its potent anticoagulant effect. Furthermore, it has the ability to inhibit the proliferation, invasion and adhesion of cancer cells to vascular endothelium. However, its clinical applicability can be compromised by side effects such as bleeding. Thus, the search for natural compounds with low bleeding risk and possible therapeutic applicability has been targeted by several research groups. From this perspective, this study aims to evaluate the hemorrhagic and anticoagulant activities and citotoxic effect for different tumor cell lines (HeLa, B16-F10, HepG2, HS-5,) and fibroblast cells (3T3) of the Heparin-like from the crab Chaceon fenneri (HEP-like). The HEP-like was purified after proteolysis, ion-exchange chromatography, fractionation with acetone and characterized by electrophoresis (agarose gel) and enzymatic degradation. Hep-like showed eletroforetic behavior similar to mammalian heparin, and high trisulfated /Nacetylated disaccharides ratio. In addition, HEP-like presented low in vitro anticoagulant activity using aPTT and a minor hemorrhagic effect when compared to mammalian heparin. Furthermore, the HEP-like showed significant cytotoxic effect (p<0.001) on HeLa, HepG2 and B16-F10 tumor cells with IC50 values of 1000 ug/mL, after incubation for 72 hours. To assess the influence of heparin-like on the cell cycle in HeLa cells, analysis was performed by flow cytometry. The results of this analysis showed that HEP-like influence on the cell cycle increasing S phase and decreasing phase G2. Thus, these properties of HEP-like make these compounds potential therapeutic agents

Avaliação do potencial anti-inflamatório de composto tipo heparina (cCTH) extraído do caranguejo Goniopsis cruentata em modelo experimental de peritonite

Heparin, a sulfated polysaccharide, was the first compound used as an anticoagulant and antithrombotic agent. Due to their structural characteristics, also has great potential anti-inflammatory, though such use is limited in inflammation because of their marked effects on coagulation. The occurrence of heparin-like compounds that exhibit anticoagulant activity decreased in aquatic invertebrates, such as crab Goniopsis cruentata, sparked interest for the study of such compounds as anti-inflammatory drugs. Therefore, the objective of this study was to evaluate the potential modulator of heparin-like compound extracted from Goniopsis cruentata in inflammatory events, coagulation, and to evaluate some aspects of its structure. The heparin-type compound had a high degree of N-sulphation in its structure, being able to reduce leukocyte migration into the peritoneal cavity at lower doses compared to heparin and diclofenac sodium (anti-inflammatory commercial). Furthermore, it was also able to inhibit the production of nitric oxide and tumor necrosis factor alpha by activated macrophages, inhibited the activation of the enzyme neutrophil elastase in low concentrations and showed a lower anticoagulant effect in high doses as compared to porcine mucosal heparin. Because of these observations, the compound extracted from crab Goniopsis cruentata can be used as a structural model for future anti-inflammatory agents

Avaliação de heterociclo do tipo mesoiônico solubilizado em sistema microemulsionado para aplicação em dutos

The efficiency of inhibition to corrosion of steel AISI 1018 of surfactant coconut oil saponified (SCO) and heterocyclic type mesoionics (1,3,4-triazólio-2-tiolato) in systems microemulsionados (SCO-ME and SCO-ME-MI) Of type O/A (rich in water emulsion) region with the work of Winsor IV. The systems microemulsionados (SCO-ME and SCO-ME-MI) were evaluated with a corrosion inhibitor for use in saline 10,000 ppm of chloride enriched with carbon dioxide (CO2). The assessment of corrosion inhibitors were evaluated by the techniques of linear polarization resistance (LPR) and loss of weight (MW) in a cell instrumented given the gravity and electrochemical devices. The systems were shooting speed of less than 60 minutes and efficiency of inhibition [SCO-ME (91.25%) and SCO-ME-MI (98.54%)]