Estudo da viabilidade da utilização de cinza de lodo de esgoto como adição em argamassa de cimento Portland

The use of sewage sludge as a raw material falls within the waste recycling key in the current process model environmental sustainability .Waste recycling has been consolidated as a sustainable environmentally sound technical solution, and. Despite showing very variable composition and characteristics, sewage sludge, can be considered as a residue with a high recycling potential in the building sector. In this paper the feasibility of using sewage sludge ash was studied in addition to Portland cement mortar in 1:3 mass considered the standard dash. This gray additions were studied in proportions of 5%, 10 %, 15 %, 20 %, 25% and 30% by mass of cement. The methodology was focused on the characterization of materials by physical, chemical , mechanical , environmental and morphological followed by the production of mortar tests ,and finalized by the characterization tests of mortar in the fresh state, through the consistency index, content of entrained air, bulk density and water retention, and in the hardened state by bulk density, water absorption by capillarity capillarity coefficient, compressive strength, tensile strength in bending ,tensile bond strength and microstructural analysis for percentages of 0 to 20%. After comparing with the standard mortar mortars with addition of ash, it is concluded that the ash of sewage sludge did not impair the integrity and properties of mortars with addition, including increasing resistance to compression and tension, being 20% more indicated percentage. Thus, it becomes feasible the addition of sewage sludge ash in Portland cement mortar for the trait studied

Utilização de redes neurais artificiais para detecção e diagnóstico de falhas

In a real process, all used resources, whether physical or developed in software, are subject to interruptions or operational commitments. However, in situations in which operate critical systems, any kind of problem may bring big consequences. Knowing this, this paper aims to develop a system capable to detect the presence and indicate the types of failures that may occur in a process. For implementing and testing the proposed methodology, a coupled tank system was used as a study model case. The system should be developed to generate a set of signals that notify the process operator and that may be post-processed, enabling changes in control strategy or control parameters. Due to the damage risks involved with sensors, actuators and amplifiers of the real plant, the data set of the faults will be computationally generated and the results collected from numerical simulations of the process model. The system will be composed by structures with Artificial Neural Networks, trained in offline mode using Matlab®

Caracterização genética e in situ de Gossypium barbadense na região norte do Brasil

Brazil has been considered one of the diversity centers of Gossypium barbadense species. It is believed that a relatively big erosion genetic process occurs with the species, due to economic, cultural and agricultural problems. A local diagnostic about species situation is the first step for reducing the diversity loss and establishing conservation strategies in situ. This research aimed the identification of the presence of Gossypium populations, characterization, determination of the main risks and collection of the accesses to store in germoplam banks, in Para and Amapa States. Expeditions were conducted in November 2004. An interview was carried out with the plant proprietor for characterizing in situ of G. barbadense species and of the environment where the plants were inserted. On hundred seventy nine plants in 22 municipal districts were collected in Para State and 117 plants in nine municipal districts in Amapa State. The majority of plants belong to G. barbadense species (98% in Amapa and 94% in Para). Plants occur in back yards, beside roads and spontaneously. That ones from back yards were more abundant (97% in Amapa and 95% in Para) and maintained as medicinal plants as the principal reason. Plants in natural environments in both states evaluated were not found, therefore, the creation of reserves and the application of others conventional methods of maintenance in situ are not applicable. The plant proprietors do not use to store or process seeds. Seed storage was reported as a practice by only 1% of the plant proprietors from Para and 11% from Amapa. The most plants collected were from two to three years of age (58% in Amapa and 93% in Para). As conclusions G. barbadense is the species most spread in the two studied states and are found in back yards. In Amapa State the botanical variety barbadense or Quebradinho is predominant, whereas in Para State the predominant variety is brasiliense or Rim-de-boi. Adequate conservation of thestudied species must be carried out in germoplasm collections maintained ex situ

PUPSI :uma proposta de processo unificado para políticas de segurança da informação

The way to deal with information assets means nowadays the main factor not only for the success but also for keeping the companies in the global world. The number of information security incidents has grown for the last years. The establishment of information security policies that search to keep the security requirements of assets in the desired degrees is the major priority for the companies. This dissertation suggests a unified process for elaboration, maintenance and development of information security policies, the Processo Unificado para Políticas de Segurança da Informação - PUPSI. The elaboration of this proposal started with the construction of a structure of knowledge based on documents and official rules, published in the last two decades, about security policies and information security. It's a model based on the examined documents which defines the needed security policies to be established in the organization, its work flow and identifies the sequence of hierarchy among them. It's also made a model of the entities participating in the process. Being the problem treated by the model so complex, which involves all security policies that the company must have. PUPSI has an interative and developing approach. This approach was obtained from the instantiation of the RUP - Rational Unified Process model. RUP is a platform for software development object oriented, of Rational Software (IBM group). Which uses the best practice known by the market. PUPSI got from RUP a structure of process that offers functionality, diffusion capacity and comprehension, performance and agility for the process adjustment, offering yet capacity of adjustment to technological and structural charges of the market and the company

Model-Driven requirements engineering process aided by ontologies and natural controlled languages

Researches in Requirements Engineering have been growing in the latest few years. Researchers are concerned with a set of open issues such as: communication between several user profiles involved in software engineering; scope definition; volatility and traceability issues. To cope with these issues a set of works are concentrated in (i) defining processes to collect client s specifications in order to solve scope issues; (ii) defining models to represent requirements to address communication and traceability issues; and (iii) working on mechanisms and processes to be applied to requirements modeling in order to facilitate requirements evolution and maintenance, addressing volatility and traceability issues. We propose an iterative Model-Driven process to solve these issues, based on a double layered CIM to communicate requirements related knowledge to a wider amount of stakeholders. We also present a tool to help requirements engineer through the RE process. Finally we present a case study to illustrate the process and tool s benefits and usage