Gestao tecnologia: um estudo de caso no setor sucroalcooleiro

PEDRO, Edilson da Silva Pedro. Gestão tecnológica: um estudo de caso no setor sucroalcooleiro. 2004. 145f. Dissertaçao (Mestrado em Engenharia de Producao) - Universidade Federal de Sao Carlos, Sao Carlos, 2004.

Construindo um modelo de referência ao despertar do interesse dos sujeitos em projetos educativos em ambiente on-line

This dissertation was written for the making of a model to be used as reference to the construction and diagnoses of educational projects in on-line environments. The model approaches a series of characteristics, technical and humans, which if considered can increase the potential of awake the interests to the active use of these projects for the students and build conditions to the development of an active posture by the students, fundamental factor to the educational advances. Focused in the students, not in the technology in use, we propose this model as a guide, reference to be used in a critical way in relation with every educational context. This research was made from the qualitative category, trough the method of study of case, using as reference to the analysis the use of the website guanabara.info - website outside of the school context - by it users, heard through the internet, by the use of semi-opened interview, in a data taken of the primary type. We follow as theoretical references Paulo Freire´s work, considering his vision of education and the building of knowledge as a process which occurs between man, and Celestín Freinet, in his pedagogy of humanized and critical insertion of the technologies in the school. At the end, we show the practical utilization of the model constructed using it for the diagnostics of an educational project in the on-line educational environmental moodle

Controlador em modo dual adaptativo robusto - DMARC

The so-called Dual Mode Adaptive Robust Control (DMARC) is proposed. The DMARC is a control strategy which interpolates the Model Reference Adaptive Control (MRAC) and the Variable Structure Model Reference Adaptive Control (VS-MRAC). The main idea is to incorporate the transient performance advantages of the VS-MRAC controller with the smoothness control signal in steady-state of the MRAC controller. Two basic algorithms are developed for the DMARC controller. In the first algorithm the controller's adjustment is made, in real time, through the variation of a parameter in the adaptation law. In the second algorithm the control law is generated, using fuzzy logic with Takagi-Sugeno s model, to obtain a combination of the MRAC and VS-MRAC control laws. In both cases, the combined control structure is shown to be robust to the parametric uncertainties and external disturbances, with a fast transient performance, practically without oscillations, and a smoothness steady-state control signal

Determinação dos parâmetros do controlador preditivo generalizado com função de pesos variante no tempo através de algoritmos genéticos

The predictive control technique has gotten, on the last years, greater number of adepts in reason of the easiness of adjustment of its parameters, of the exceeding of its concepts for multi-input/multi-output (MIMO) systems, of nonlinear models of processes could be linearised around a operating point, so can clearly be used in the controller, and mainly, as being the only methodology that can take into consideration, during the project of the controller, the limitations of the control signals and output of the process. The time varying weighting generalized predictive control (TGPC), studied in this work, is one more an alternative to the several existing predictive controls, characterizing itself as an modification of the generalized predictive control (GPC), where it is used a reference model, calculated in accordance with parameters of project previously established by the designer, and the application of a new function criterion, that when minimized offers the best parameters to the controller. It is used technique of the genetic algorithms to minimize of the function criterion proposed and searches to demonstrate the robustness of the TGPC through the application of performance, stability and robustness criterions. To compare achieves results of the TGPC controller, the GCP and proportional, integral and derivative (PID) controllers are used, where whole the techniques applied to stable, unstable and of non-minimum phase plants. The simulated examples become fulfilled with the use of MATLAB tool. It is verified that, the alterations implemented in TGPC, allow the evidence of the efficiency of this algorithm

Eosi: um modelo para desenvolvimento de sistemas embarcados tolerantes a falhas

The semiconductor technologies evolutions leads devices to be developed with higher processing capability. Thus, those components have been used widely in more fields. Many industrial environment such as: oils, mines, automotives and hospitals are frequently using those devices on theirs process. Those industries activities are direct related to environment and health safe. So, it is quite important that those systems have extra safe features yield more reliability, safe and availability. The reference model eOSI that will be presented by this work is aimed to allow the development of systems under a new view perspective which can improve and make simpler the choice of strategies for fault tolerant. As a way to validate the model na architecture FPGA-based was developed.

Desacoplamento de um gerador síncrono através de um controle adaptativo por modelo de referência baseado em funções de Base radial

An alternative nonlinear technique for decoupling and control is presented. This technique is based on a RBF (Radial Basis Functions) neural network and it is applied to the synchronous generator model. The synchronous generator is a coupled system, in other words, a change at one input variable of the system, changes more than one output. The RBF network will perform the decoupling, separating the control of the following outputs variables: the load angle and flux linkage in the field winding. This technique does not require knowledge of the system parameters and, due the nature of radial basis functions, it shows itself stable to parametric uncertainties, disturbances and simpler when it is applied in control. The RBF decoupler is designed in this work for decouple a nonlinear MIMO system with two inputs and two outputs. The weights between hidden and output layer are modified online, using an adaptive law in real time. The adaptive law is developed by Lyapunov s Method. A decoupling adaptive controller uses the errors between system outputs and model outputs, and filtered outputs of the system to produce control signals. The RBF network forces each outputs of generator to behave like reference model. When the RBF approaches adequately control signals, the system decoupling is achieved. A mathematical proof and analysis are showed. Simulations are presented to show the performance and robustness of the RBF network

Uma proposta de um controlador adaptativo por posicionamento de pólos e estrutura variável

There are two main approaches for using in adaptive controllers. One is the so-called model reference adaptive control (MRAC), and the other is the so-called adaptive pole placement control (APPC). In MRAC, a reference model is chosen to generate the desired trajectory that the plant output has to follow, and it can require cancellation of the plant zeros. Due to its flexibility in choosing the controller design methodology (state feedback, compensator design, linear quadratic, etc.) and the adaptive law (least squares, gradient, etc.), the APPC is the most general type of adaptive control. Traditionally, it has been developed in an indirect approach and, as an advantage, it may be applied to non-minimum phase plants, because do not involve plant zero-pole cancellations. The integration to variable structure systems allows to aggregate fast transient and robustness to parametric uncertainties and disturbances, as well. In this work, a variable structure adaptive pole placement control (VS-APPC) is proposed. Therefore, new switching laws are proposed, instead of using the traditional integral adaptive laws. Additionally, simulation results for an unstable first order system and simulation and practical results for a three-phase induction motor are shown

Determinantes de competitividade de destinos turísticos aplicados aos roteiros regionais: uma avaliação do roteiro Seridó/RN

The tourism industry is gaining representation by move and stimulate the economy, especially by allowing the generation of employment and income, thus allowing growth opportunities for localities where tourism develops. Therefore, the present study entitled determinants of competitiveness of tourist destinations applied to regional routes: an evaluation of the Route of Seridó/RN, discusses the issue of competitiveness in tourism and tries to understand the scenery of this Route. The main objective of the study is to assess the conditions of competitiveness in the Route of Seridó/RN according to benchmarks and global determinants of competitiveness for tourist destinations. The study has also as specifics objectives: define dimensions of the reference model for use in evaluating the competitiveness of the Route of Seridó/RN; identify levels of governance and competitiveness in the municipalities that make up the sample set above the Route, and analyze to what extent the competitiveness of the Route correspond to the global reference of competitiveness of tourism destinations. Regarding the methodology, it is a search for an exploratory- descriptive and used a combination of quantitative and qualitative research method as expected and required in the implementation of the evaluation tool called Compet&enible Model. For data collection, it has been taken technical visits and also analysis of documents and materials. Data analysis was based on the records and documents and the use of simple descriptive statistics for the scores of the elements offered by Compet&enible Model. The results allowed us to know the real conditions of competitiveness of the Seridó/RN Route forward to the attributes of tourist destinations for global competitiveness: the dimension I, Governance, reached 17 points, classified as "in structuring" and dimension II, Competitiveness, reached 10 points, ranking "weak". These results highlight the need for greater involvement of the actors in the supply chain of tourism in Polo Seridó/RN for the actions, programs and projects are put into practice. It is expected that tourism is considered an important activity for the local and global development, serving as a reference for the future management of Seridó/RN Route, guiding new policy guidelines, planning and organization to better competitiveness

Estimativa da profundidade do embasamento na bacia potiguar usando inversão gravimétrica

The gravity inversion method is a mathematic process that can be used to estimate the basement relief of a sedimentary basin. However, the inverse problem in potential-field methods has neither a unique nor a stable solution, so additional information (other than gravity measurements) must be supplied by the interpreter to transform this problem into a well-posed one. This dissertation presents the application of a gravity inversion method to estimate the basement relief of the onshore Potiguar Basin. The density contrast between sediments and basament is assumed to be known and constant. The proposed methodology consists of discretizing the sedimentary layer into a grid of rectangular juxtaposed prisms whose thicknesses correspond to the depth to basement which is the parameter to be estimated. To stabilize the inversion I introduce constraints in accordance with the known geologic information. The method minimizes an objective function of the model that requires not only the model to be smooth and close to the seismic-derived model, which is used as a reference model, but also to honor well-log constraints. The latter are introduced through the use of logarithmic barrier terms in the objective function. The inversion process was applied in order to simulate different phases during the exploration development of a basin. The methodology consisted in applying the gravity inversion in distinct scenarios: the first one used only gravity data and a plain reference model; the second scenario was divided in two cases, we incorporated either borehole logs information or seismic model into the process. Finally I incorporated the basement depth generated by seismic interpretation into the inversion as a reference model and imposed depth constraint from boreholes using the primal logarithmic barrier method. As a result, the estimation of the basement relief in every scenario has satisfactorily reproduced the basin framework, and the incorporation of the constraints led to improve depth basement definition. The joint use of surface gravity data, seismic imaging and borehole logging information makes the process more robust and allows an improvement in the estimate, providing a result closer to the actual basement relief. In addition, I would like to remark that the result obtained in the first scenario already has provided a very coherent basement relief when compared to the known basin framework. This is significant information, when comparing the differences in the costs and environment impact related to gravimetric and seismic surveys and also the well drillings

Modelagem computacional para avaliação da interação entre painéis de alvenaria e estrutura de suporte em concreto armado

The developed study proposes a new computer modeling efficient and easy to apply in usual project situations to evaluate the interaction between masonry panels and support structure. The proposed model simulates the behavior of the wall exclusively using frame finite elements, thus compounding an equivalent frame. The validation was performed in two ways: firstly, through the analysis of various panels of generic plans, comparing the results obtained from equivalent frame model with the ones from a reference model, which uses shell finite elements in discretization of the walls; and in a second step, comparing with the results of the experimental model of Rosenhaupt. The analyzes considered the linear elastic behavior for materials and consisted basically in the evaluation of vertical displacements and efforts in support beams, and tensions at the base of walls. Was also evaluated, from flat and threedimensional modeling of some walls from a real project, important aspects of the wall-beam interaction, e.g.: the presence of openings of doors and windows, arranged in any position; conditions of support and linking of beams; interference of moorings between walls; and consideration of wind action. The analysis of the achieved results demonstrated the efficiency of the proposed modeling, since they have very similar aspects in the distribution of stresses and efforts, always with intensities slightly larger than those of the reference and experimental models.

Gestao tecnologia: um estudo de caso no setor sucroalcooleiro

PEDRO, Edilson da Silva Pedro. Gestão tecnológica: um estudo de caso no setor sucroalcooleiro. 2004. 145f. Dissertaçao (Mestrado em Engenharia de Producao) - Universidade Federal de Sao Carlos, Sao Carlos, 2004.