The Effect of Residence Time on the Tensile Properties of Superelastic and Thermal Activated Ni-Ti Orthodontic Wires

Since the 1980s, different devices based on superelastic alloys have been developed to fulfill orthodontic applications. Particularly in the last decades several researches have been carried out to evaluate the mechanical behavior of Ni-Ti alloys, including their tensile, torsion and fatigue properties. However, studies regarding the dependence of elastic properties on residence time of Ni-Ti wires in the oral cavity are scarce. Such approach is essential since metallic alloys are submitted to mechanical stresses during orthodontic treatment as well as pH and temperature fluctuations. The goal of the present contribution is to provide elastic stress-strain results to guide the orthodontic choice between martensitic thermal activated and austenitic superelastic Ni-Ti alloys. From the point of view of an orthodontist, the selection of appropriate materials and the correct maintenance of the orthodontic apparatus are essential needs during clinical treatment. The present work evaluated the elastic behavior of Ni-Ti alloy wires with diameters varying from 0.014 to 0.020 inches, submitted to hysteresis tensile tests with 8% strain. Tensile tests were performed after periods of use of 1, 2 and 3 months in the oral cavity of patients submitted to orthodontic treatment. The results from the hysteresis tests allowed to exam the strain range covered by isostress lines upon loading and unloading, as well as the residual strain after unloading for both superelastic and thermal activated Ni-Ti wires. Superelastic Ni-Ti wires exhibited higher load isostress values compared to thermal activated wires. It was found that such differences in the load isostress values can increase with increasing residence time.

Imagem sócio-ambiental do bairro de Cidade Nova, Natal-RN, por seus moradores

This dissertation investigates how the neighborhood of Cidade Nova, located in the western side of the of Natal, is perceived by its residents in order to understand its socio-environmental image, intending to contribute both to define strategies of urban intervention and environmental education in the area and to consolidate a methodology that addresses this kind of problem. The completion of field research used a multimethod strategy to study the socio-environmental image of urban areas. It consists of: (a) review of local history from literature research, data recorded by the City Hall, news published on the city's newspapers and interviews with former inhabitants, (b) application of questionnaires to inhabitants including emotions, visual perception, memory and local social activities, (c) development of a drawing of the district, (d) conducting focus groups with inhabitants, using as a starting point the results obtained in the previous activities. In steps "b" and "c" attended 32 neighborhood residents, 16 of them being Community Health Workers and other 16 persons appointed by them. In step "d" 10 individuals took part, divided into two groups. The result of the research showed a picture of residents coincident with the image conveyed by the media in relation to the issues: violence, garbage, public policy/social support and appreciation of the beauties of environmental (dunes and Parque da Cidade park). Although Cidade Nova has been regarded as a dirty, noisy and dangerous place, most of the participants say they enjoy living on the neighborhood. Overall, the results corroborate and gain theoretical explanations, as they are interrelated. The socio-environmental image is expressed for instance in the elements dunes, dump, railroad tracks and Central Avenue that gain symbolic connotation influenced by time and socio-economic context. The insecurity and other negative characteristics assigned by the inhabitants and the media are parallel to the place attachment, since the environmental legibility, the time/familiarity and territoriality offer inhabitants the preference for place of residence, setting up their social identity.

Tomada de decisão individual e aprendizado em Dinoponera quadríceps (Ponerinae, Hymenoptera) forrageando em ambientes dinâmicos

When searching for food, animals often make decisions of where to go, how long to stay in a foraging area and whether or not to return to the last visited spot. These decisions can be enhanced by cognitive traits and adjusted based on previous experience. In social insects such as ants, foraging efficiency have an impact on both individual and colony level. The present study investigated, in the laboratory, the effect of distance from food, capture success and food size, and reward rate on decisions of where to forage in Dinoponera quadriceps, a ponerine ant that forage solitarily and individually make their foraging decisions. We also investigated the influence of learning on the performance of workers over successive trips searching for food by measuring the patch residence time in each foraging trip. Four scenarios were created differing in food reward rates, food size offered and distances colony-food site. Our work has shown that as a rule-of-thumb, workers of D. quadriceps return to the place where a prey item was found on the previous trip, regardless of distance, food size and reward rate. When ants did not capture preys, they were more likely to change path to search for food. However, in one of the scenarios, this decision to switch paths when unsuccessful was less evident, possibly due to the greater variation of possible outcomes ants could experience in this scenario and cognitive constraints of D. quadriceps to predict variations of food distribution. Our results also indicated a learning process of routes of exploration as well as the food site conditions for exploration. After repeated trips, foragers reduced the patch residence time in areas that they did not capture food and quickly changed of foraging area, increasing their foraging efficiency.

The Effect of Residence Time on the Tensile Properties of Superelastic and Thermal Activated Ni-Ti Orthodontic Wires

Since the 1980s, different devices based on superelastic alloys have been developed to fulfill orthodontic applications. Particularly in the last decades several researches have been carried out to evaluate the mechanical behavior of Ni-Ti alloys, including their tensile, torsion and fatigue properties. However, studies regarding the dependence of elastic properties on residence time of Ni-Ti wires in the oral cavity are scarce. Such approach is essential since metallic alloys are submitted to mechanical stresses during orthodontic treatment as well as pH and temperature fluctuations. The goal of the present contribution is to provide elastic stress-strain results to guide the orthodontic choice between martensitic thermal activated and austenitic superelastic Ni-Ti alloys. From the point of view of an orthodontist, the selection of appropriate materials and the correct maintenance of the orthodontic apparatus are essential needs during clinical treatment. The present work evaluated the elastic behavior of Ni-Ti alloy wires with diameters varying from 0.014 to 0.020 inches, submitted to hysteresis tensile tests with 8% strain. Tensile tests were performed after periods of use of 1, 2 and 3 months in the oral cavity of patients submitted to orthodontic treatment. The results from the hysteresis tests allowed to exam the strain range covered by isostress lines upon loading and unloading, as well as the residual strain after unloading for both superelastic and thermal activated Ni-Ti wires. Superelastic Ni-Ti wires exhibited higher load isostress values compared to thermal activated wires. It was found that such differences in the load isostress values can increase with increasing residence time.