Caldo de cana desidratado na ração de codornas de corte

In order to evaluate the effect of levels of dehydrated cane juice sugar (DCJS) (0.0, 1.5, 3.0 and 4.5%) in the diet of European quail (Coturnix coturnix coturnix) on performance on performance, carcass characteristics and economical at 22 days of age indices, 192 quails cutting, were distributed in a completely randomized design with four treatments and six replicates of eight birds each There was no significant difference to the performance of quail in any of the periods. Quadratic effects of levels of DCJS on carcass weight (y = 173.71 + 4.2767x – 1.2644x², R² = 0.99), thigh-thigh more about (y = 36,055 + 1,1263x – 0,2256x², R² = 0.91) and abdominal fat (y = 3,3295 - + 0.8903x 0,19x2, R ² = 0,97) where the optimum levels were estimated 1,69; 2.50 and 2.34%, respectively. There was a linear effect descending of DCJS levels on weight breast with skin (y = 66.267 – 0.5653x, R² = 0.83) and without skin (y = 60.286 – 0.7193x, R² = 0.58). In economic analysis, one can observe higher profit to the producer with the use of conventional feed. However, between the levels of inclusion of sugar cane juice is observed that the level of 1.5% DCJS obtained the best results in economic analysis, obtaining only a difference of relative gross margin of 0.47% compared to conventional. It is recommended 1.69 and 2.50% DCJS for higher carcass, thigh + drumstick weight and lower percentage of abdominal fat quails, respectively.

Proposta de localização de uma unidade de tratamento de óleo e gordura residual de fritura na cidade do Natal/RN para produção de biodiesel

This work addresses biodiesel by transesterification from the use of waste frying oil as a possible technological alternative for both reducing greenhouse gas emissions and by presenting themselves as an environmental call to designate a rational use of oil when no longer played in the environment to become renewable energy. It has proposed location of a residual oil and fat treatment plant to produce biodiesel, using models of Location and Routing for the improvement of routes. To achieve the goal, questionnaires were administered in establishments that use oil or vegetable fat in their productive activities in order to quantify the residue, to analyze actions and environmental perception of people who work directly with the residue on the destination you are being given to oil and fat used. It has indicated using of two single setup location, the method of Center of Gravity and the model of Ardalan, a geographical point that minimizes the costs of transporting waste to the treatment plant. Actions have been proposed for the improvement of collection routes this residue using the Routing Method of Scanning, as an illustration. The results demonstrated the lack of knowledge of the people who deal directly with large amounts of waste, on the environmental impacts caused by their incorrect disposal. The models used were uniform since point out to neighborhoods in similar regions. The neighborhoods of Lagoa Nova / Morro Branco (Ardalan) and Nova Descoberta (Center of Gravity) as ideal for the installation of treatment plant. However, it is suggested to be tested other models that take into account new variables than those used (supply of waste and the distance between points). The routing through the method of scanning has shown that it is possible, in a simple way to optimize routes in order to reduce distances and therefore the logistics costs in the collection of such waste. Introducing a route as a test to gather the twenty largest oil suppliers used in sample frying, using as a main factor time 8 hour of working shift every day

Analysis of testosterone pulsatility in women with ovulatory menstrual cycles

Objetivo: Avaliar o padrão pulsátil da secreção da testosterona em mulheres normais. Métodos: Oito mulheres saudáveis com ciclos ovulatórios foram selecionadas. Amostras sanguíneas foram coletadas a cada dez minutos durante seis horas, começando entre 7 e 8 h da manhã, após dez horas de jejum, nas três fases do ciclo menstrual: folicular média (Dia 7), folicular tardia (Dia 12) e lútea (Dia 21). Foram mensurados: testosterona, LH e, no basal, também SHBG. Resultados: A frequência dos pulsos de testosterona, média da amplitude do pulso, porcentagem do incremento da amplitude, duração e intervalos dos pulsos foram similares nas três fases (p > 0,05). A pulsatilidade do LH foi estatisticamente diferente entre as três fases (p < 0,001), caracterizando padrão característico do ciclo ovulatório normal. Conclusões: Esses dados aumentam o conhecimento sobre o padrão de secreção da testosterona no ciclo menstrual humano e representam uma contribuição para a investigação clínica, tanto no hiperandrogenismo como na síndrome de insuficiência androgênica __________________________________________________ ABSTRACT Objective: To evaluate the pattern of the pulsatile secretion of testosterone in normal menstrual cycle. Methods: Eight healthy women with ovulatory menstrual cycles were enrolled. Blood samples were collected at ten-minute intervals for six hours, starting between 7 and 8 am, after a ten-hour fasting, in three phases: mid-follicular (Day 7), late follicular (Day 12) and mid-luteal phase (Day 21). Samples were assayed for testosterone, LH and the baseline also for SHBG. Results: Testosterone pulse frequency, mean amplitude pulse, percentage of increment in pulse amplitude, mean duration of pulses and pulse interval were similar in the three phases. LH pulsatility was statistically different among the three phases (p < 0.001) representing normal ovulatory cycles. Conclusions: These data increase the knowledge about the testosterone secretion profile in the human menstrual cycle and can be used as a contribution to clinical investigation in both hyperandrogenism and androgen insufficiency syndrome

Índices de obesidade central e fatores de risco cardiovascular na síndrome dos ovários policísticos

Fundamento: A obesidade abdominal apresenta elevada prevalência em mulheres com síndrome dos ovários policísticos (SOP) e está associada a um aumento do risco cardiovascular. Objetivo: Verificar a acurácia da circunferência da cintura (CC), da relação cintura-quadril (RCQ), da relação cinturaestatura (RCEST) e do índice de conicidade (índice C), no que se refere à detecção de fatores de risco cardiovascular (FRCV) em mulheres com SOP. Métodos: Por meio de estudo transversal, foram alocadas 102 mulheres (26,5 ± 5 anos) com diagnóstico de SOP, de acordo com o consenso de Rotterdam. O colesterol total (CT), os triglicerídeos (TG), o LDL-colesterol (LDL-C), o HDLcolesterol (HDL-C), a glicemia de jejum, a glicemia após teste oral de tolerância à glicose (TOTG) e a pressão arterial (PA) foram avaliados em todas as pacientes, além das variáveis antropométricas. Resultados: A relação cintura-estatura foi o marcador que apresentou correlações positivas significativas com o maior número de FRCV (PA, TG e glicemia após TOTG), destacando-se ainda a correlação negativa com HDL-C. Todos os marcadores antropométricos avaliados se correlacionaram positivamente com PA, enquanto CC e RCQ apresentaram correlação positiva também com TG. No tocante à acurácia para detecção de FRCV, os indicadores antropométricos considerados apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEST, que apresentou sensibilidade superior a 70%. Conclusão: A RCEST demonstrou ser o indicador antropométrico com a melhor acurácia para a predição de FRCV. Nesse sentido, propõe-se a inclusão desse parâmetro de fácil mensuração na avaliação clínica para o rastreamento de mulheres com SOP e FRCV----------------------ABSTRACT Background: Women with polycystic ovary syndrome (PCOS) present a high prevalence of abdominal obesity, which is associated with an increased cardiovascular risk. Objective: To verify the accuracy of the waist circumference (WC), waist-to-hip ratio (WHR), waist-to-height ratio (WHtR) and the conicity index (CI) in the detection of cardiovascular risk factors (CVRF) in women with PCOS. Methods: The present transversal study allocated 102 women (26.5 ± 5 years) with a diagnosis of PCOS, according to the Rotterdam criteria. Total cholesterol (TC), triglycerides (TG), LDL-cholesterol (LDL-C), HDL-cholesterol (HDL-C), fasting glucose, glucose after the oral glucose tolerance test (OGTT) and blood pressure (BP) were evaluated in all patients, in addition to the anthropometric variables. Results: The WHtR was the marker that presented significant positive correlations with the highest number of CVRF (BP, TG and post-OGTT glucose), whereas there was a negative correlation with HDL-C. All the evaluated anthropometric markers were positively correlated with BP, whereas WC and WHR also presented a positive correlation with TG. Regarding the accuracy for the detection of CVRF, the anthropometric markers presented a sensibility > 60%, especially the WHtR, which had a sensibility > 70%. Conclusion: The WHtR showed to be the most accurate anthropometric indicator for the prediction of CVRF. In this sense, we propose the inclusion of this easily-measured parameter in the clinical assessment for the screening of women with PCOS and CVRF

Síndromes de polinização ocorrentes em uma área de Mata Atlântica, Paraíba, Brasil

ARAUJO, Afranio Cesar de et al. Síndromes de polinização ocorrentes em uma área de Mata Atlântica, Paraíba, Brasil. Biotemas, Florianopolis, v. 4, n. 22, p.83-94, dez. 2009. Disponível em: . Acesso em: 04 out. 2010.

Análise do processo de aprendizagem e alfabetização científica sobre a evolução dos veterbrados em um museu de ciências

Os museus como centros de ciências, enquanto espaços de educação não formal podem, por meio da participação ativa do público, promover a compreensão da ciência ao aguçar a curiosidade do indivíduo e estimular o prazer pela descoberta. Ação desenvolvida como intervenção acadêmica, social e cultural associada ao PIBID/UFRN/Biologia, tem como objetivo avaliar o uso de espaço de ensino não formal, na aprendizagem de conceitos, promovendo a alfabetização científica através de uma exposição em um museu de ciências e morfológicas. A visitação foi realizada no Museu de Ciências Morfológicas da UFRN, com alunos do 1º ano do ensino médio da escola Estadual Lourdes Guilherme, sendo aplicados questionários de pré e pós-visita sobre a Evolução dos Vertebrados, com intuito de analisar a contribuição do museu na aprendizagem destes conteúdos. A porcentagem de acertos no questionário pré-visita variou entre 8 e 68% em relação ao conhecimento geral dos alunos quanto à evolução dos vertebrados, enquanto no pós-visita essa variação foi de 16 a 90%. Com base nesses primeiros resultados verificamos o quanto os museus interativos de ciência se apresentam como um espaço educativo complementar à educação formal, possibilitando a ampliação e a melhoria do conhecimento científico de estudantes. Isso demonstra que o uso de espaços não formais contribui para a aprendizagem significativa, além de promover a alfabetização científica destes alunos ao gerar a compreensão da ciência e aguçar a curiosidade dos mesmos para o prazer da descoberta.

Síndrome de burnout e autoeficácia: um estudo com profissionais de enfermagem de hospitais privados de Natal/rn

This research verifies the influence of the self-efficacy level on burnout syndrome incidence in relation to nursing professionals from private hospitals located in the Municipality of Natal, State of Rio Grande do Norte. The nature of the research was descriptive, and the used data analysis method was quantitative which was developed through SPSS computational package, version 17.0. The used instrument for the investigation was Maslach-Burnout Inventory (MBI), and the General Perceived Self-efficacy Scale (GPSES) was applied to a sample formed from 230 nursing professionals. The statistic techniques to data analysis were: frequency analysis; factor analysis; Cronbach.s alpha; Kaiser-Meyer-Olkin test (KMO); Bartlett efericity test; percentual analysis; Spearman rank correlation analysis; and simple regression. The achieved factors from factor analysis of MBI were the same, taking into account the dimensions which Maslach initially suggested to the instrument (emotional exhaustion, lack of personal realization, and depersonalization). However, one highlights that the low internal consistence of the depersonalization dimension can occur from people.s difficulty (caused by cultural aspects) of assuming this attitude in their work environment. Through GSE, it was achieved a factor which confirmed the unidimensionality showed by the author of the instrument. In relation to the syndrome incidence, it was verified that about 50% of the researched sample presented burnout syndrome evidence. Referring to self-efficacy level, about 65% of the researched sample presented low level of self-efficacy, what can be explained by the work characteristics of these professionals. In relation to the self-efficacy influence on the Burnout syndrome, it was verified that self-efficacy can be one of the aspects which influences occupational stress chronification (burnout), mainly to the personal realization dimension. Therefore, the researched hospital organizations need reflect about their attitudes in respect to their professionals, since the numbers showed a dangerous tendency regarding a predisposition to burnout syndrome of their staff, what implies not only a significant amount of individuals who can present high levels of emotional exhaustion, lack of personal realization, and depersonalization, but also the fact that this group presents low level of self-efficacy

Auto-eficácia de alunos de administração: um estudo com concluintes do curso de graduação em Administração no Estado do Pará

The current study presents the characteristics of self-efficacy of students of Administration course, who work and do not work. The study was conducted through a field research, descriptive, addressed quantitatively using statistical procedures. Was studied a population composed of 394 students distributed in three Higher Education Institutions, in the metropolitan region of Belém, in the State of Pará. The sampling was not probabilistic by accessibility, with a sample of 254 subjects. The instrument for data collection was a questionnaire composed of a set of questions divided into three sections: the first related to sociodemographic data, the second section was built to identify the work situation of the respondent and the third section was built with issues related to General Perceived Self-Efficacy Scale proposed by Schwarzer and Jerusalem (1999). Sociodemographic data were processed using methods of descriptive statistics. This procedure allowed characterizing the subjects of the sample. To identify the work situation, the analysis of frequency and percentage was used, which allowed to classify in percentage, the respondents who worked and those that did not work, and the data related to the scale of self-efficacy were processed quantitatively by the method of multivariate statistics using the software of program Statistical Package for Social Sciences for Windows - SPSS, version 17 from the process of Exploratory Factor Analysis. This procedure allowed characterizing the students who worked and the students who did not worked. The results were discussed based on Social Cognitive Theory from the construct of self-efficacy of Albert Bandura (1977). The study results showed a young sample, composed the majority of single women with work experience, and indicated that the characteristics of self-efficacy of students who work and students who do not work are different. The self-efficacy beliefs of students who do not work are based on psychological expectations, whereas the students who work demonstrated that their efficacy beliefs are sustained by previous experiences. A student who does not work proved to be reliant in their abilities to achieve a successful performance in their activities, believing it to be easy to achieve your goals and to face difficult situations at work, simply by invest a necessary effort and trust in their abilities. One who has experience working proved to be reliant in their abilities to conduct courses of action, although know that it is not easy to achieve your goals, and in unexpected situations showed its ability to solve difficult problems

Avaliação de megadoses de retinol palmitato no pós-parto imediato sobre o retinol do leite de puérperas atendidas no hospital josé pedro bezerra, Natal-RN

Vitamin A deficiency (VAD) is a serious public health problem in developing countries, and as a therapeutic and prophylactic measure retinil palmitate is being supplemented. Nevertheless its efficacy has been questioned. The objective of the study was to evaluate the supplementation of two retinil palmitate megadosis on the serum retinol levels of post partum healthy mothers from Dr. José Pedro Bezerra (Hospital Santa Catarina) hospital, Natal - RN. The enrolled women (n=199) were randomly distributed into three studied groups and supplemented with retinil palmitate immediately after delivery with a single 200,000 IU dose (group S1), two 200,000 IU dose (group S2) with 24h difference between the doses, or no supplementation (group C). Among women selected, 143 remained until the end of the study. The influence of vitamin A dietary intake was evaluated during pregnancy and after 30 days of delivery. The average intake of the population was reasonable, but a high prevalence of inadequate intake was found. Retinol in colostrums and mature milk was determined by high performance liquid chromatography (HPLC). The retinol average in colostrums and mature milk in the supplemented and control groups were adequate according to the reference values. In colostrums, women from groups C, S1 and S2 presented retinol averages by milk volume of 94.8 ± 40.2 µg/dL, 92.2 ± 50.0 µg/dL and 91.8 ± 53.7 µg/dL, respectively. No difference was found between these averages (p=0.965), this was also seen when the values where expressed as µg/g of fat (p=0.905). After 30 days of delivery, retinol per milk volume differed between the control group (36.6 ± 17.5 µg/dL) and groups supplemented with 200,000 IU (51.0 ± 28.8 µg/dL) or 400,000 IU (55.2 ± 31.6 µg/dL) of retinil palmitate (p<0,05). Nevertheless, when S1 and S2 groups where compared, no significant difference was found (p=0.97). Considering retinol/g of fat, the means were 12.7 ± 6.7 µg/g, 15.6 ± 8.3 µg/g and 17.2 ± 8.9 µg/g for groups C, S1 and S2, respectively, with significant difference between groups S2 and C (p=0,01). Subclinical VAD prevalence showed a serious public health problem in the study population (32% in colostrums and 31.5% in mature milk). When analyzing the groups separately, the group which received two doses (200,000 IU + 200,000 IU) presented the lowest VAD prevalence (20.7%). Retinil palmitate supplementations of 200,000 IU and 400,000 IU (divided in two doses) in the immediate post partum showed no significant difference. Nevertheless, the 400,000 IU (divided in two doses) supplementation showed a reduction in VAD

Influência da suplementação de retinol palmitato sobre os níveis de vitamina A no leite de puérperas saudáveis

The tendency towards reduction of serum retinol levels, an existing placental barrier and the increase of retinol demand, are factors that place puerperal and lactating women at risk for Vitamin A deficiency. This micronutrient is an essential component of vital processes such as differentiation, cellular proliferation, and apoptosis. The objective of this study is to evaluate the effect of palmitate retinol supplementation (100.000UI) upon the milk retinollevels in puerperal women at the Januário Cicco University Maternity Hospital. This intervention has been adopted by the Ministry of Health since 2002. The longitudinal experiment was conducted with 106 puerperal women (68 comprised the supplemented group and 38 the control group). The High Performance Liquid Chromatography (HPLC) method was used to dose the retinol of the milk and serum samples, and the creamtocrit method to determine the milk fat levels. The retinol means for the colostrums were 99.0 ± 64.4 ug/dL and 160.1 ± 94,4 ug/dl 6 hours afier supplementation; 68.9 ± 33.5 ug/dL for the transitional milk, and 30.6 ± 15.2 ug/dL for the mature milk of the supplemented group. Ali the difterences between means were statistically significant. The difterence between retinol means in the control group were also significant, with these being greater in the colostrum, 88.6 ± 62.1 ug/dL with 61.9 ± 30.1 ug/dl in the transition milk and 32.9 ±32.9 ± 17.6 ug/dL in the mature milk. No significant difference was observed in the retinol means of the three types ot milk in the supplemented group when compared to their respective means in the control group. The prevalence in serum (35.1 % and 81.1 % for the cutting point 20 ug/dL, respectively) and in milk (51.4%) revealed vitamin A deficiency as a public health problem. COlostrum, transition, and mature milk tats varied similarly in the supplemented group (1,92 ± 0,96; 3,25 ± 1,27 and 3,31 ± 1,36 grams) and in the control group (1,87 ± 1,14; 3,25 ± 1,31 and 3,36 ± 1,67 grams), with an observed difference between the colostrum/transition milk and the colostrum/mature milk fats. No difference was observed between the groups. The study showed that the 200.000UI supplementation was not sufficient to increase the milk retinol to the desired levels nor to meet the demands of the mothers with deprived hepatic reserves. It is suggested that another similar dose be offered within 30 days or less, and within 2 months post-partum, while continual/y monitoring for possible pregnancy

Processamento e caracterização da blenda poli (metacrilato de metila) (PMMA) elastomerico e poli (tereftalato de etileno) (PET) pós-consumo

This work studied the immiscible blend of elastomeric poly(methyl methacrylate) (PMMA) with poly(ethylene terephthalate) (PET) bottle grade with and without the use of compatibilizer agent, poly(methyl methacrylate-co-glycidyl methacrylate - co-ethyl acrylate) (MGE). The characterizations of torque rheometry, melt flow index measurement (MFI), measuring the density and the degree of cristallinity by pycnometry, tensile testing, method of work essential fracture (EWF), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were performed in pure polymer and blends PMMA/PET. The rheological results showed evidence of signs of chemical reaction between the epoxy group MGE with the end groups of the PET chains and also to the elastomeric phase of PMMA. The increase in the concentration of PET reduced torque and adding MGE increased the torque of the blend of PMMA/PET. The results of the MFI also show that elastomeric PMMA showed lower flow and thus higher viscosity than PET. In the results of picnometry observed that increasing the percentage of PET resulted in an increase in density and degree crystallinity of the blends PMMA/PET. The tensile test showed that increasing the percentage of PET resulted in an increase in ultimate strength and elastic modulus and decrease in elongation at break. However, in the phase inversion, where the blend showed evidence of a co-continuous morphology and also, with 30% PET dispersed phase and compatibilized with 5% MGE, there were significant results elongation at break compared to elastomeric PMMA. The applicability of the method of essential work of fracture was shown to be possible for most formulations. And it was observed that with increasing elastomeric PMMA in the formulations of the blends there was an improvement in specific amounts of essential work of fracture (We) and a decrease in the values of specific non-essential work of fracture (βWp)

Efeito da adição de grafite expandido por microondas nas propriedades térmicas, elétricas e mecânicas de nanocompósitos de matriz epóxi

Epoxy based nanocomposites with 1 wt % and 3 wt % of nanographite were processed by high shear mixing. The nanographite was obtained by chemical (acid intercalation), thermal (microwave expansion) and mechanical (ultrasonic exfoliation) treatments. The mechanical, electrical and thermal behavior of the nanocomposites was determined and evaluated as a function of the percentage of reinforcement. According to the experimental results, the electrical conductivity of epoxy was not altered by the addition of nanographite in the contents evaluated. However, based on the mechanical tests, nanocomposites with addition of 1 wt.% and 3 wt.% of nanographite showed increase in tensile strength of 16,62 % and 3,20 %, respectively, compared to the neat polymer. The smaller increase in mechanical strength of the nanocomposite with 3 wt.% of nanographite was related to the formation of agglomerates. The addition of 1 wt.% and 3 wt.% of nanographite also resulted in a decrease of 6,25 % and 17,60 %, respectively, in the relative density of the material. Thus, the specific strength of the nanocomposites was approximately 33,33 % greater when compared to the neat polymer. The addition of 1 wt.% and 3 wt.% of nanographite in the material increased the mean values of thermal conductivity in 28,33 % and 132,62 %, respectively, combined with a reduction of 26,11 % and 49,80 % in volumetric thermal capacity, respectively. In summary, it has been determined that an addition of nanographite of the order of 1 wt.% and 3 wt.% produced notable elevations in specific strength and thermal conductivity of epoxy

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Influência da vermiculita expandida na formulação de pastas leves para evitar a migração de gás em cimentação de poços petrolíferos

The gas migration during the cementing of wells is one of the main problems of oil wells engineering. Its occurrence can cause severe problems since shortly to loss of control of the well after cementation. Recently, 20/04/2010 In an accident of major proportions in the Gulf of Mexico, among other factors, faulty cementing operation provided the gas migration, causing the accident, in which 11 people died and 17 were injured occurred. Besides the serious consequences that can be caused by gas migration, remediation of the problem, which is made by injecting cement in damaged areas, usually involves additional costs and is not always effective. Therefore, preventing gas migration to be preferred. Some methods are used to prevent the migration of the pressurized gas as the annular space, application of pressure pulses, reducing the height of the cement column compressible cement pastes of low permeability, pastes and to control free filtered water, and binders of thixotropic cement expandable and flexible. Thus, the cement pastes used to prevent gas migration must meet the maximum these methods. Thus, this study aimed to formulate a cement paste to prevent gas migration, using the expanded vermiculite, and evaluate the behavior of the folder trials necessary for use in oil wells. Free water content, rheological properties, compressive strength, loss of liquid phase sedimentation of solids, specific weight, thickening time and gas migration: The following tests were performed. The results show that meets the specifications paste formulated for use in oil wells and the use of expanded vermiculite contribute to the absorption of free water, thixotropy and low density. The absorption of free water is proven to result in zero percentage test free water content, thixotropy is observed with the high value of the initial gel strength (Gi) in testing rheological properties and low density is proven in test weight specific

Análise de modelos geológicos utilizando percolação dinâmica

In the present study we elaborated algorithms by using concepts from percolation theory which analyze the connectivity conditions in geological models of petroleum reservoirs. From the petrophysical parameters such as permeability, porosity, transmittivity and others, which may be generated by any statistical process, it is possible to determine the portion of the model with more connected cells, what the interconnected wells are, and the critical path between injector and source wells. This allows to classify the reservoir according to the modeled petrophysical parameters. This also make it possible to determine the percentage of the reservoir to which each well is connected. Generally, the connected regions and the respective minima and/or maxima in the occurrence of the petrophysical parameters studied constitute a good manner to characterize a reservoir volumetrically. Therefore, the algorithms allow to optimize the positioning of wells, offering a preview of the general conditions of the given model s connectivity. The intent is not to evaluate geological models, but to show how to interpret the deposits, how their petrophysical characteristics are spatially distributed, and how the connections between the several parts of the system are resolved, showing their critical paths and backbones. The execution of these algorithms allows us to know the properties of the model s connectivity before the work on reservoir flux simulation is started