Formação da habilidade de interpretar gráficos cartesianos em licenciandos em química segundo a teoria de P. Ya. Galperin

It has been remarkable among the Science Teaching debates the necessity that students do not learn only theories, laws and concepts, but also develop skills which allows them to act towards a critical citizenship. Therefore, some of the skills for the natural sciences learning must be taught consciously, intentionally and in a planned way, as component of a basic competence. Studies of the last twenty years have shown that students and teachers have plenty of difficulties about skills development and, among several, the skill of interpreting Cartesian graphics, essential for the comprehension of Natural Science. In that sense, the development of that type of professional knowledge during the initial education of future Chemistry teachers has become strategic, not only because they need to know how to use it, but also because they need to know how to teach it. This research has as its general objective the organization, development and study of a process of formation of the skill of interpreting Cartesian graphics as part of the teachers professional knowledge. It has been accomplished through a formative experience with six undergraduate students of the Teaching Degree Course of Chemistry of Universidade Federal do Rio Grande do Norte (UFRN Federal University of Rio Grande do Norte), in Brazil. In order to develop that skill, we have used as reference P. Ya. Galperin s Theory of the Stepwise Formation of Mental Actions and Concepts and its following qualitative indicators: action form, degree of generalization, degree of consciousness, degree of independence and degree of solidness. The research, in a qualitative approach, has prioritized as instruments of data collecting the registering of the activities of the undergraduate students, the observation, the questionnaire and the diagnosis tests. At the first moment, a teaching framework has been planned for the development of the skill of interpreting Cartesian graphics based on the presupposed conceptions and steps of Galperin s Theory. At the second moment, the referred framework has been applied and the process of the skill formation has been studied. The results have shown the possibility of develop the skill conscious about the invariant operation system, with a high degree of generalization and internalized the operational invariant in the mental plane. The students have attested the contributions at that type of formative experience. The research reveals the importance of going deeper about the teaching comprehension of the individualities tied to the process of internalization, according to Galperin s Theory, when the update of abilities as part of the teaching professional knowledge is the issue

Sistema especialista para detecção de falhas em comandos elétricos

This work consists of the creation of a Specialist System which utilizes production rules to detect inadequacies in the command circuits of an operation system and commands of electric engines known as Direct Start. Jointly, three other modules are developed: one for the simulation of the commands diagram, one for the simulation of faults and another one for the correction of defects in the diagram, with the objective of making it possible to train the professionals aiming a better qualification for the operation and maintenance. The development is carried through in such a way that the structure of the task allows the extending of the system and a succeeding promotion of other bigger and more complex typical systems. The computational environment LabView is employed to enable the system

A previdência rural universalista e a sua relevância na economia dos municípios do Rio Grande do Norte

This study deals with the rural social security Universalist established by the Constitution of 1988 and its importance in the economy of the municipalities of Rio Grande do Norte. In this context, the study seeks to satisfy two important criteria that guide the selection of objects of social science research: a consideration of issues that have relevance to the real world and the intention to make the contribution to the scholarly literature on theoretical and empirical aspects. The research seeks to reveal what is the economic importance of the subsystem of social security for rural municipalities in RN. The hypothesis is that the transfer of income received by beneficiaries from the rural social security tax exceeds the explicit mechanisms for most municipalities in RN, in many cases significantly, proving the importance of this policy as a mechanism for combating poverty and reducing social inequality, especially before the fragility of the federal system on the national political entity hall. The study presents theoretical cores - chapters 1-3 - and empirical - Chapter 4. The first core is about the evolution of social protection as a state policy, addressing the influential theories and typologies of the State of Social Welfare and the characteristics of the Brazilian social security model, but mainly, its rural social security subsystem, its history until universalistic model inaugurated by the Federal Constitution of 1988. The second begins with an overview of studies that have emphasized the impact of Social Security on the local economy of small municipalities, then passing data and statistics in order to gauge the socioeconomic importance of pension income in the rural municipalities of Rio Grande do Norte. To this end, the final chapter provides a comparison of the monetary value transferred by the payment of social security benefits - rural and urban - to each of the 167 municipalities in RN with the equally important sources of income in the budget of municipal entities. Apart from their own tax revenues, are objects of comparison with the value of pension benefits awarded in RN, transfer quota state relating to the municipality on the federal ICMS and the transfer on the FPM

Identificação das condições gerais de conservação dos reservatórios integrantes do sistema de abastecimento de água de Natal

Infrastructure works are included in strategic areas for the social development. For that matter that all of the investments are very important for the social development. When the population has enough water and an acceptable quality, and it includes a wastewater gathering and its treatment, the whole society became less susceptible to the water diseases. Even the Water Supply and the Sewage depend for its perfect operation of reservoirs, or of the accumulation of water to provide the popular necessity, either due to retention or for the treatment wastewarer. These structures present very specific environmental conditions, because the microclimate created around them, like high environmental humidity and for the existence of many harmful substances for the concrete, such as chloride ions presents in water. The reservoir that compose the System of Water Supply of Natal were built between 1970s and 1980s, a period whom the technical and scientific community did not have in-depth studies about the reinforced concrete mechanism of deterioration. Therefore, these reservoirs have been suffered accelerated deterioration progress, and they have been shown many pathological manifestations strikingly visible. In front of all these problems this academic work aims to identify the generally conditions of conservation of all the reservoirs components of the Water Supply System of Natal. This academic work objectives to develop a recuperation plan for use in these reservoirs, in this academic work it was achieved all the survey of pathological manifestation existing in each reservoir. It was made with local visits, photographic recorders of all manifestations viii and realization of in loco tests. The other step consisted in a application of GDE/UnB metodolgy reformulated by Fonseca (2007). In the step of local visits in each reservoir it was evaluated carbonation depth, by spreading a phenolphthalein solution with 1% of concentration; evaluation of contamination of chlorides, by spreading silver nitrate solution with 1% of concentration, and evaluation of width cracks. After the conclusion of all the testings, it was established that all reservoir, studied in this academic work, have showed an advanced deteriorating condition. It´s presents prevalent pathological manifestations as unacceptable cracks, spots, efflorescence and reinforcement corrosion, and in some cases, chlorides contamination. After the conclusion of the testings and its concatenation it was able to implementing, using GDE/UnB methodology, the order of the restoration its service life and initial safety conditions

Proposta de integração das redes de comunicação da COSERN como uma solução de contigêncvia em caso de falhas nos enlaces do backbone de automação

T'his dissertation proposes alternative models to allow the interconnectioin of the data communication networks of COSERN Companhia Energética do Rio Grande do Norte. These networks comprise the oorporative data network, based on TCP/IP architecture, and the automation system linking remote electric energy distribution substations to the main Operatin Centre, based on digital radio links and using the IEC 60870-5-101 protoco1s. The envisaged interconnection aims to provide automation data originated from substations with a contingent route to the Operation Center, in moments of failure or maintenance of the digital radio links. Among the presented models, the one chosen for development consists of a computational prototype based on a standard personal computer, working under LINUX operational system and running na application, developesd in C language, wich functions as a Gateway between the protocols of the TCP/IP stack and the IEC 60870-5-101 suite. So, it is described this model analysis, implementation and tests of functionality and performance. During the test phase it was basically verified the delay introduced by the TCP/IP network when transporting automation data, in order to guarantee that it was cionsistent with the time periods present on the automation network. Besides , additional modules are suggested to the prototype, in order to handle other issues such as security and prioriz\ation of the automation system data, whenever they are travesing the TCP/IP network. Finally, a study hás been done aiming to integrate, in more complete way, the two considered networks. It uses IP platform as a solution of convergence to the communication subsystem of na unified network, as the most recente market tendencies for supervisory and other automation systems indicate

Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise