Protótipo de um microgerador termoelétrico de estado sólido: cogeração a gás

The thermoelectric energy conversion can be performed directly on generators without moving parts, using the principle of SEEBECK effect, obtained in junctions of drivers' thermocouples and most recently in semiconductor junctions type p-n which have increased efficiency of conversion. When termogenerators are exposed to the temperature difference (thermal gradient) eletromotriz a force is generated inducing the appearance of an electric current in the circuit. Thus, it is possible to convert the heat of combustion of a gas through a burner in power, being a thermoelectric generator. The development of infrared burners, using porous ceramic plate, is possible to improve the efficiency of heating, and reduce harmful emissions such as CO, CO2, NOx, etc.. In recent years the meliorate of thermoelectric modules semiconductor (TEG's) has stimulated the development of devices generating and recovery of thermal irreversibility of thermal machines and processes, improving energy efficiency and exergy these systems, especially processes that enable the cogeneration of energy. This work is based on the construction and evaluation of a prototype in a pilot scale, for energy generation to specific applications. The unit uses a fuel gas (LPG) as a primary energy source. The prototype consists of a porous plate burner infrared, an adapter to the module generator, a set of semiconductor modules purchased from Hi-Z Inc. and a heat exchanger to be used as cold source. The prototype was mounted on a test bench, using a system of acquisition of temperature, a system of application of load and instrumentation to assess its functioning and performance. The prototype had an efficiency of chemical conversion of 0.31% for electrical and heat recovery for cogeneration of about 33.2%, resulting in an overall efficiency of 33.51%. The efficiency of energy exergy next shows that the use of primary energy to useful fuel was satisfactory, although the proposed mechanism has also has a low performance due to underuse of the area heated by the small number of modules, as well as a thermal gradient below the ideal informed by the manufacturer, and other factors. The test methodology adopted proved to be suitable for evaluating the prototype

Aplicação de técnicas de aprendizado de máquina no reconhecimento de classes estruturais de proteínas

Nowadays, classifying proteins in structural classes, which concerns the inference of patterns in their 3D conformation, is one of the most important open problems in Molecular Biology. The main reason for this is that the function of a protein is intrinsically related to its spatial conformation. However, such conformations are very difficult to be obtained experimentally in laboratory. Thus, this problem has drawn the attention of many researchers in Bioinformatics. Considering the great difference between the number of protein sequences already known and the number of three-dimensional structures determined experimentally, the demand of automated techniques for structural classification of proteins is very high. In this context, computational tools, especially Machine Learning (ML) techniques, have become essential to deal with this problem. In this work, ML techniques are used in the recognition of protein structural classes: Decision Trees, k-Nearest Neighbor, Naive Bayes, Support Vector Machine and Neural Networks. These methods have been chosen because they represent different paradigms of learning and have been widely used in the Bioinfornmatics literature. Aiming to obtain an improvment in the performance of these techniques (individual classifiers), homogeneous (Bagging and Boosting) and heterogeneous (Voting, Stacking and StackingC) multiclassification systems are used. Moreover, since the protein database used in this work presents the problem of imbalanced classes, artificial techniques for class balance (Undersampling Random, Tomek Links, CNN, NCL and OSS) are used to minimize such a problem. In order to evaluate the ML methods, a cross-validation procedure is applied, where the accuracy of the classifiers is measured using the mean of classification error rate, on independent test sets. These means are compared, two by two, by the hypothesis test aiming to evaluate if there is, statistically, a significant difference between them. With respect to the results obtained with the individual classifiers, Support Vector Machine presented the best accuracy. In terms of the multi-classification systems (homogeneous and heterogeneous), they showed, in general, a superior or similar performance when compared to the one achieved by the individual classifiers used - especially Boosting with Decision Tree and the StackingC with Linear Regression as meta classifier. The Voting method, despite of its simplicity, has shown to be adequate for solving the problem presented in this work. The techniques for class balance, on the other hand, have not produced a significant improvement in the global classification error. Nevertheless, the use of such techniques did improve the classification error for the minority class. In this context, the NCL technique has shown to be more appropriated

Eficácia do bochecho de quitosana a 0,4% sobre o biofilme e bactérias orais

The purpose of this study was evaluate the effectiveness of the chitosan at 0.4 with high molecular weight and high deacetylation degree mouthrinse over the total decrease of the streptococci, Streptococcus mutans, lactobaci/li and over the perceptible bacterial film and gingival bleeding indices. For that, a total of 68 healthy students between 11 and 13 years old, not allergic to crustacean and not users of antibiotics or antimicrobial agent for the last three months or during the treatment, was selected. From those, thirty two individuaIs used the mouthrinse test, and thirty six, the control one. The participants rinsed 10 mL of the solutions twice a day, one during the moming (which was supervised), and another one during the aftemoon (which was not supervised), for fifteen days. The saliva collect for the microbiological analysis, as well as the perceptible bacterial film and gingival bleeding indices check, were made before the use ofthe mouthrinses (base line), immediately after the last mouthrinse on the day (zero time) and fifteen days after (fifteen time). These data were collected at school and the saliva was carried inside the ice to the laboratory. The samples were diluted, and 0.1 mL ofthe 10 -1 dilution was seeded in Rogosa SL agar, for further analysis of the total of lactobaci/lus~ 0.1 mL of the 10-4 dilution in Mitis Salivarius with bacitracin, for S. mutans analysis; and 0.1 mL of the 10-6 dilution in Mitis Salivarius for the analysis ofthe total of streptococcus. The Rogosa SL agar plates were incubated in aerobic at 37°C for 72 hours and the MSB and the MS were incubated in anaerobic in Gaspak@ jars at 37°C for 48 hours for further count ofColonies Former Units (CFUs). The assay was made in duplicate for each bacterial group analyzed. The number of CFUs transformed in LOGlO was analyzed according to the following tests: ANOV A, t of Paired and Not Paired Student, Friedman, Man-Whitney and square-qui test. On the base line, alI the variables analyzed were similar on both tested groups. On both groups, for the total of streptococcus there was no significant difference along the time and for S. mutans there was a statistic significant increase of the CFUs from the base line to the zero time. For the total of lactobaccilus there was no significant difference on the test group along the time, and on the control there was a significant increase ofthe CFUs ITom the base line to the zero time. For both groups, there was significant decrease ofthe perceptible bacterial film index along the time, and that can be explained by the mechanic effect of the mouthrinse over the bacterial film and by the participation of the students on the research which could have motivated him to a better toothbrushing (Hawthome effect). The gingival bleeding index also showed a decrease along the time, even though it was not significant. Therefore, the conclusion of this study was that the chitosan at 0.4 % mouthrinse was not effective on the CFUs reduction of the three bacterial groups analyzed, as well as on the reduction of the perceptible bacterial film and gingival bleeding indices

Caracterização da caprinocultura nas microrregiões da chapada do Apodi e de Angicos do Estado do Rio Grande do Norte

The objectives of this study were to characterize the goat production systems and to identify the factors limiting the production chain and develop solutions to improve the goat industry in the Rio Grande do Norte State, Brazil. One hundred and sixty two questionnaires were applied to goat farmers looking for productive, economic and social information about the utilized systems in the micro regions of Chapada do Apodi and Angicos. The majority producers interviewed were male, aging from 31 to 50 years old, attended elementary school, associated to farm organizations and living with his family on farm. Their main concerns are feeding the heard and animal theft. Their average farmlands areas range from 11 to 50 hectares. Goat meat is the main production in Chapada do Apodi whereas milk is produced by farmers in Angicos micro region. The majority of goat production works with an extensive system, with low technological inputs. It was detected that the meat and milk production as the marketing of goat products is not well conducted. Other point to be improved is to increase the meat and dairy goat products to be available for consumers. Goat systems for meat and milk production has great to potential for this micro regions, although public policies for an organized supply chain is needed

O jogo de RPG como ferramenta auxiliar de aprendizagem na disciplina de Ciências

ON reflecting the traditional teaching approach, characterized by non-dynamic and descriptive methods that still persists in schools at the present time, associated to social living enrichment has motivated the search for new techniques to stimulate students in the process of teaching, such as roleplaying games, known as RPG, already being used in various school disciplines. Considering the amount of themes in general sciences and in biology, in particular that could be explored through RPG our purpose was to develop a game to be used as a learning complementary tool. PANGÉIA, the game we developed, was based on the GURPS system and to be placed at the geological Eras of the earth. The objective of the game was playing a character that represented an animal belonging to a Class of Vertebrates, and making it surviving and reproducing during risky situations presented in the game. These situations were narratives by the Master about challenges that the character would face, which should be solved using the dices. Along the narrative, the Master introduced concepts and informations about the subject being studied. To evaluating how the game worked out, we solicited 11 volunteers, from two different schools in Natal, to play PANGÉIA. Before starting the game, and without knowing the final objectives of our project, the volunteers answered a general questionnaire to let us know their level of knowledge, which was also answered after playing the game. The comparison of the volunteers answers before and after playing the game suggests that this activity influenced them. Also, based on this test, we identified critical aspects to be modified in PANGÉIA, specially a stronger relation between both the questionnaire and the game placement with the narrative of the master. In order to have PANGÉIA used as a complementary learning tool, a teachers handbook has to be written, including rules concerning the format of game application. Nonetheless, based on this pilot study, we conclude that topics on sciences and biology can be easily adjusted to RPG format, and its flexibility provides multiple combinations that can be used to help learning the more difficult topics to be taught in a class

Relação entre o ciclo sono e vigília e a função cardiorrespiratória em estudantes de medicina

Students, normally, present an irregular sleep pattern characterized by delays in sleep onset and offset from weekdays to weekends, short sleep duration on weekdays and long sleep duration on weekends. The reduction of the necessary sleep and the irregularity in the sleep patterns provoke relevant short- and long-term impairments on performances, for example, in cardiorespiratory function. The cardiorespiratory performance represents, in addition to fitness, traces associated to health conditions and in several studies to pattern and/or individual s sleep quality. The aim of this study was to evaluate the pattern of the sleep-wake cycle and the cardiorespiratory function of medical students under different class schedules. The study was accomplished with two classes of medical students of UFRN, one had classes at 7 am (n = 47) and the second had classes at 8 am (n = 41) during the week. On the first stage of the study all volunteers filled out an anamnesis, the International Physical Activity questionnaire, the Pittsburgh index of sleep quality, the Portuguese version of the Horne and Östberg cronotype questionnaire, the Health and Sleep questionnaire and the Epworth Scale of Somnolence (ESS). On the second stage, 24 students (12 of each class) had their activity rhythm monitored by actimeters set to record activity at a 2-min interval for 14 days concomitant to the completion of the sleep diary. In this same stage, each volunteer performed the effort test (treadmill) only once in the morning period (between 9:00 and 11:00). The students showed an irregular pattern of the sleep-wake cycle and this irregularity is strongly influenced by the class schedules, in addition to the contribution of the academic demand, social activities and endogenous factors. The students who woke up earlier showed greater irregularity in the sleep-wake pattern. The earlier was the class schedule the worse was the sleep quality and the greater was the frequency of students with excessive diurnal somnolence. The classes schedules and the irregular pattern of the sleep-wake cycle did not show effect on the cardiorespiratory performance of the medical students. The performance on the test seems to be affected by other factors, which can be related to the pattern of the sleep-wake cycle or not. Therefore, it is suggested that the late start of classes provokes less irregularity on the pattern of the sleep-wake cycle. However, it was observed that this irregularity and the class schedule seem not to affect the cardiorespiratory performance directly

Alterações na evocação de uma memória aversiva ao liongo do ciclo estral de ratas: influências da transmissão gabaérgica na amígdala

GABAergic neurotransmission has been implicated in many aspects of learning and memory, as well as mood and anxiety disorders. The amygdala has been one of the major focuses in this area, given its essential role in modulating emotionally relevant memories. However, studies with male subjects are still predominant in the field. Here we investigated the consequences for an aversive memory of enhancing or decreasing GABAergic transmission in the basolateral nucleus of the amygdala (BLA). Wistar female rats were trained in the plus-maze discriminative avoidance task, in which they had to learn to avoid one of the enclosed arms where an aversive stimulus consisting of a bright light and a loud noise was given (day 1). Fifteen minutes before the test session (day 2) animals received 0,2 μL infusions of either saline solution, the GABAergic agonist muscimol (0,05 mg/ml), or the GABAergic antagonist bicuculine (0,025 mg/ml) bilaterally intra-BLA. On the test day, females in proestrous or estrous presented adequate retrieval and did not extinguish the task, while females in metestrous or diestrous presented impaired retrieval. In the first group, muscimol infusion impaired retrieval and bicuculline had no effect, suggesting naturally low levels of GABAergic transmission in the BLA of proestrous and estrous females. In the second group, muscimol infusion had no effect and bicuculline reversed retrieval impairment, suggesting naturally high levels of GABAergic transmission in the BLA of metestrous and diestous females. Additionally, proestrous and estrous females presented higher anxiety levels compared to metestrous and diestrous females, which could explain better performance of this group. On the other hand, BLA GABAergic system did not interfere with the innate fear response because drug infusions had no effect in anxiety. Thus, retrieval alterations caused by the GABAergic drugs were probably related specifically to memory processes

Validade e confiabilidade da versão informatizada do inventário Million de estilos de personalidade

Currently, several psychological and non-psychological tests can be found in publishes without standardization on procedures set in different psychological areas, like intelligence, emotional states, attitudes, social skills, vocation, preferences and others. The computerized psychological testing is a extension of traditional testing psychological practices. However, it has own psychometrics qualities, either by its matching in a computerized environment or by the extension that can be developed in it. The current research, developed from a necessity to study process of validity and reliability on a computerized test, drew a methodological structure to provide parallel applications in numerous kinds of operational groups, evaluating the influences of the time and approach in the computerization process. This validity refers to normative values groups, reproducibility in computerized applications process and data processing. Not every psychological test can be computerized. Therefore, our need to find a good test, with quality and plausible properties to transform in computerized application, leaded us to use The Millon Personality Inventory, created by Theodore Millon. This Inventory assesses personality according to 12 bipolarities distributed in 24 factors, distributed in categories motivational styles, cognitive targets and interpersonal relations. This instrument doesn t diagnose pathological features, but test normal and non adaptive aspects in human personality, comparing with Theodore Millon theory of personality. In oder to support this research in a Brazilian context in psychological testing, we discuss the theme, evaluating the advantages and disadvantages of such practices. Also we discuss the current forms in computerization of psychological testing and the main specific criteria in this psychometric specialized area of knowledge. The test was on-line, hosted in the site http://www.planetapsi.com, during the years of 2007 and 2008, which was available a questionnaire to describe social characteristics before test. A report was generated from the data entry of each user. An application of this test was conducted in a linear way through a national coverage in all Brazil regions, getting 1508 applications. Were organized nine groups, reaching 180 applications in test and retest subject, where three periods of time and three forms of retests for studies of on-line tests were separated. Parallel to this, we organized multi-application session offline group, 20 subjects who received tests by email. The subjects of this study were generally distributed by the five Brazilian regions, and were noticed about the test via the Internet. The performance application in traditional and on-line tested groups subsidies us to conclude that on-line application provides significantly consistency in all criteria for validity studied and justifies its use. The on-line test results were related not only among themselves but were similar to those data of tests done on pencil and paper (0,82). The retests results demonstrated correlation, between 0,92 and, 1 while multisessions had a good correlation in these comparisons. Moreover, were assessed the adequacy of operational criteria used, such as security, the performance of users, the environmental characteristics, the organization of the database, operational costs and limitations in this on-line inventory. In all these five items, there were excellent performances, concluding, also, that it s possible a self-applied psychometric test. The results of this work are a guide to question and establish of methodologies studies for computerization psychological testing software in the country

Beta: uma ferramenta para geração de testes de unidade a partir de especificações B

Formal methods and software testing are tools to obtain and control software quality. When used together, they provide mechanisms for software specification, verification and error detection. Even though formal methods allow software to be mathematically verified, they are not enough to assure that a system is free of faults, thus, software testing techniques are necessary to complement the process of verification and validation of a system. Model Based Testing techniques allow tests to be generated from other software artifacts such as specifications and abstract models. Using formal specifications as basis for test creation, we can generate better quality tests, because these specifications are usually precise and free of ambiguity. Fernanda Souza (2009) proposed a method to define test cases from B Method specifications. This method used information from the machine s invariant and the operation s precondition to define positive and negative test cases for an operation, using equivalent class partitioning and boundary value analysis based techniques. However, the method proposed in 2009 was not automated and had conceptual deficiencies like, for instance, it did not fit in a well defined coverage criteria classification. We started our work with a case study that applied the method in an example of B specification from the industry. Based in this case study we ve obtained subsidies to improve it. In our work we evolved the proposed method, rewriting it and adding characteristics to make it compatible with a test classification used by the community. We also improved the method to support specifications structured in different components, to use information from the operation s behavior on the test case generation process and to use new coverage criterias. Besides, we have implemented a tool to automate the method and we have submitted it to more complex case studies

Distribuição de derivados de petróleo por redes de polidutos: uma abordagem através de algoritmos evolucionários híbridos para um problema triobjetivo

An important problem faced by the oil industry is to distribute multiple oil products through pipelines. Distribution is done in a network composed of refineries (source nodes), storage parks (intermediate nodes), and terminals (demand nodes) interconnected by a set of pipelines transporting oil and derivatives between adjacent areas. Constraints related to storage limits, delivery time, sources availability, sending and receiving limits, among others, must be satisfied. Some researchers deal with this problem under a discrete viewpoint in which the flow in the network is seen as batches sending. Usually, there is no separation device between batches of different products and the losses due to interfaces may be significant. Minimizing delivery time is a typical objective adopted by engineers when scheduling products sending in pipeline networks. However, costs incurred due to losses in interfaces cannot be disregarded. The cost also depends on pumping expenses, which are mostly due to the electricity cost. Since industrial electricity tariff varies over the day, pumping at different time periods have different cost. This work presents an experimental investigation of computational methods designed to deal with the problem of distributing oil derivatives in networks considering three minimization objectives simultaneously: delivery time, losses due to interfaces and electricity cost. The problem is NP-hard and is addressed with hybrid evolutionary algorithms. Hybridizations are mainly focused on Transgenetic Algorithms and classical multi-objective evolutionary algorithm architectures such as MOEA/D, NSGA2 and SPEA2. Three architectures named MOTA/D, NSTA and SPETA are applied to the problem. An experimental study compares the algorithms on thirty test cases. To analyse the results obtained with the algorithms Pareto-compliant quality indicators are used and the significance of the results evaluated with non-parametric statistical tests.

Protótipo de um microgerador termoelétrico de estado sólido: cogeração a gás

The thermoelectric energy conversion can be performed directly on generators without moving parts, using the principle of SEEBECK effect, obtained in junctions of drivers' thermocouples and most recently in semiconductor junctions type p-n which have increased efficiency of conversion. When termogenerators are exposed to the temperature difference (thermal gradient) eletromotriz a force is generated inducing the appearance of an electric current in the circuit. Thus, it is possible to convert the heat of combustion of a gas through a burner in power, being a thermoelectric generator. The development of infrared burners, using porous ceramic plate, is possible to improve the efficiency of heating, and reduce harmful emissions such as CO, CO2, NOx, etc.. In recent years the meliorate of thermoelectric modules semiconductor (TEG's) has stimulated the development of devices generating and recovery of thermal irreversibility of thermal machines and processes, improving energy efficiency and exergy these systems, especially processes that enable the cogeneration of energy. This work is based on the construction and evaluation of a prototype in a pilot scale, for energy generation to specific applications. The unit uses a fuel gas (LPG) as a primary energy source. The prototype consists of a porous plate burner infrared, an adapter to the module generator, a set of semiconductor modules purchased from Hi-Z Inc. and a heat exchanger to be used as cold source. The prototype was mounted on a test bench, using a system of acquisition of temperature, a system of application of load and instrumentation to assess its functioning and performance. The prototype had an efficiency of chemical conversion of 0.31% for electrical and heat recovery for cogeneration of about 33.2%, resulting in an overall efficiency of 33.51%. The efficiency of energy exergy next shows that the use of primary energy to useful fuel was satisfactory, although the proposed mechanism has also has a low performance due to underuse of the area heated by the small number of modules, as well as a thermal gradient below the ideal informed by the manufacturer, and other factors. The test methodology adopted proved to be suitable for evaluating the prototype