Influência da sequência de empilhamento nas propriedades mecânicas de laminados compósitos submetidos à tração

Composite laminates with plies in different directions finely dispersed are classified as homogenized. The expected benefits of homogenization include increased mechanical strength, toughness and resistance to delamination. The objective of this study was to evaluate the effect of stacking sequence on the tensile strength of laminates. Composite plates were fabricated using unidirectional layers of carbon/epoxy prepreg with configurations [903/303/-303]S and [90/30/-30]3S. Specimens were subjected to tensile and open hole tension (OHT) tests. According to the experimental results, the mean values of strength for the homogenized laminates [90/30/-30]3S were 140% and 120% greater for tensile and OHT tests, respectively, as compared to laminates with configuration [903/303/-303]S. The increase in tensile strength for more homogenized laminates was associated with the increment in interlaminar interfaces, which requires more energy to produce delamination, and the more complicated crack propagation through plies with different orientations. OHT strength was not affected by the presence of the hole due to the predominance of the interlaminar shear stress in relation to the stress concentration produced by the hole

Sistematização da assistência de enfermagem (SAE) em um hospital pediátrico de ensino: uma pesquisa-ação

The incessant search if nurse for qualify nursing care makes the Nursing Assistance Systematization, a current topic of discussion throughout the country, not only in order to comply the legal requirements of their practice, but especially by the expected benefits of its application. In this meaning, this research had a qualitative approach, developed for a way of research-action. The general purpose was to analyze the change in the nursing practices in a pediatric teaching hospital, based on construction and implementation of Nursing Assistance Systematization by the nursing team. The results had the thematic analysis of Paulo Freire and were shown in the form of reports. To achieve these purposes, it began by steps pre-trial, to review the charts of the institution and an approach with the managers. In the situational diagnosis of nursing practices without the systematization followed by applying a questionnaire with a nursing team and a focal group with nurses. These ways supported the implementation stage of the Nursing Assistance Systematization which developed actions associate such as focal group with the nurses about the nursing history, capacity with the nursing team about the Nursing Assistance Systematization, development, application and reworking of printed, and discussions in the small groups. The evaluations of the changes after the actions of the research occurred through individual interview with the nurses, to check the results. The charts review confirmed the deficit in the records performed by the nurse on the chart, which reinforced the need for implementation of Nursing Assistance Systematization, an argument used on the meeting with the managers, who promptly agree with the search. The questionnaire and the focal group with the nurses reveal a process of nursing work without systematization, showing gaps in practices, but also obtained relate of expectations of improvements in quality of care as of Nursing Assistance Systematization, furnishing data to the development of ways following-up. The prints were gradually used and modified as the team understood the Nursing Assistance Systematization and its purposes through capacity course. The final evaluation pointed to the partial implementation of the stages of Nursing Assistance Systematization had been institutionalized at the history and the development of nursing, beyond difficulties with diagnosis and prescription of nursing, in later representing a paradigm shift. This search collaborated to change the view about the Nursing Assistance Systematization by nursing team at the institution had been revealed through introduction of new practices in the process of nursing work, as examination of physical exam of the patient, the interview in the admission of customers on service and the daily monitoring by nursing through development of nursing. Before addition, it was noted which the purposes of this search were achieved, since were analyzed the changes in the nursing practices with the systematization. The research-action achieved proposes of the involvement of nursing team in changing their practices. This search contributed to the implementation of the Nursing Assistance Systematization in a pediatric teaching hospital and showed which is possible to seek resolution of problems when the objective is of the group and gave access for further searches within this theme

Influência da sequência de empilhamento nas propriedades mecânicas de laminados compósitos submetidos à tração

Composite laminates with plies in different directions finely dispersed are classified as homogenized. The expected benefits of homogenization include increased mechanical strength, toughness and resistance to delamination. The objective of this study was to evaluate the effect of stacking sequence on the tensile strength of laminates. Composite plates were fabricated using unidirectional layers of carbon/epoxy prepreg with configurations [903/303/-303]S and [90/30/-30]3S. Specimens were subjected to tensile and open hole tension (OHT) tests. According to the experimental results, the mean values of strength for the homogenized laminates [90/30/-30]3S were 140% and 120% greater for tensile and OHT tests, respectively, as compared to laminates with configuration [903/303/-303]S. The increase in tensile strength for more homogenized laminates was associated with the increment in interlaminar interfaces, which requires more energy to produce delamination, and the more complicated crack propagation through plies with different orientations. OHT strength was not affected by the presence of the hole due to the predominance of the interlaminar shear stress in relation to the stress concentration produced by the hole

Os impactos tecnológicos da implantação da nota fiscal eletrônica: um estudo de casos múltiplos

Increasingly, the Information Technology is used in the society, including the private, public and third sector organizational context. Technological tools are created in order to speed, automate, control and monitor processes. These technologies generate impacts on areas that permeate their use and the objective of this study is to investigate the implementation process of the Eletronic Invoice and the impacts arising from this technological tool in companies. For that, case studies have been conducted in three companies that emit and receive Eletronic Invoice, in a Information System consultancy, that provides softwares of Eletronic Invoice, and in a State Tax Department. Data collection was performed with organizations representatives through electronic questionnaires. The study concludes that it is expected, by the investigated organizations, that the tool reaches the benefits offered by the Tax Administration. However, these benefits have not been identified yet and neither have the use of methodologies in order to identify them. Moreover, the main impact found was the need for better training and participant´s technical qualification, followed by reducing printing costs and paper purchase

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index

Diagnóstico ambiental da gestão e destinação dos resíduos da construção e demolição (RCD): análise das Construtoras Associadas ao SINDUSCON/RN e empresas coletoras atuantes no município de Parnamirim - RN

Surveys carried out in many Brazilian cities have shown that the CDW Construction and Demolition Waste, in some cases, represent more than 50% of the mass of urban solid residue. Municipalities have struggled to manage in an effective way huge quantities of CDW generated every day and solve the problem of the illegal dumping in an inadequate area, which compromise the quality of life of the population as a whole, thus causing serious problems concerning social-environmental and sanitary. This paperwork was meant it carry out environmental diagnosis of the management and the final destination of the CDW in the city of Parnamirim/RN. The methodology used in this work constituted in the bibliographical research, conducted to give support and fundaments to the subject in question, identification of the main places of legal and illegal dumping, identification of the environmental impacts caused by the irregular deposition of the CDW, valuation of quantity and quality of the CDW and perception according to the Environmental Legislation. The necessary data for the elaboration of this study were carried out through the appliance of questionnaires with open and closed questions, applied to 14 (fourteen) Real Estate developer companies associated with SINDUSCON/RN and 05 companies that deal with the transportation and collection of CDW, formal and informal interviews, exploitational visits and photographical records. The collected data went through a statistic treatment being organized into tables and graphs. The main results obtained from this research show that the interviewees hold a medium knowledge of the specific Environmental Legislation; do not have an effective model of environmental management, resorting to only reusing CDW; that the reusing of CDW is not substantial, as much as the possibility of recycling has a minimal consideration. It was also verified that a considerable percentage of interviewees affirmed to send CDW to illegal and inadequate locations. It is expected that such study can be used as an important tool to subsidize the public administration in the pursuit of solutions which could bring benefits to society and the environment

Hierarquia social e sucesso alimentar em callithrix jacchus (Primates, Callithrichidae), sob condições naturais

The competition for resources is one of the costs of group living. The scramble competition is considered an indirect type of competition, mainly associated with factors like group size and distribution of resources. Contest competition occurs when individuals compete directly for resources. In species that exibit this type of competition the establishment of dominance hierarchy can occur, resulting in differences on feeding and reproductive benefits for each member of the group. In these cases, aggressive and submissive behaviors are expected as a way to signal social status. The aim of this study was to investigate the effects of social hierarchy over food ingestion in Callithrix jacchus. Data recording was from September/2006 to March/2007, eight days by month, at Floresta Nacional de Açu do Instituto Chico Mendes de Biodiversidade. The observation time started at 05:00 AM and finished after the last animal was on the sleeptree. Analyses of aggressive interactions, behavioral profile and diet, reveals a lot of advantages for dominat animals in the study group. Dominant individuals had higher intake of animal matter that subordinates. The last ones, consumed fruits, exsudate and, eventually, explored itens that were not common to the diet. We suggest that dominance hiearchy enable the reproductive female to assure priority on access to food resources, a important caracteristc to supply tha costs to maintain tha high reproductive taxa of the specie. We also suggest that reproductive male, due to the participation on food transfer, had the forage efficience reduced