Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Cultura como desenvolvimento entre os Paresi Kozarini

The proposal of the present study is to get to know and to analyze the building up of the culture notion among the participants of the Paresi Kozarini group in the ethnodevelopment context. The main focus is the ethnographic study, presenting a description of Aldeia Rio Verde (Paresi Indigenous Land), understanding it as a synthesis of historic processes which explains the current moment of Paresi Indigenous group. By using the mentioned methodology, the processes and social relations produced along the contact path of this group with regional-national culture were focused, and how that contact affects the present. The research questions which concern the present study refer to the processes of identification of the researched subjects about themselves and in relation to others. According as almost the totality of the indigenous group we usually know as Paresi, recognize itself as Kozarini, the attention is directed to the manner how they see themselves and how they differ from the other Paresi groups, not indigenous people, and other indigenous groups; and which meanings of the prefix ethno- (which culture elements) they have elected to represent and manage external matters to their culture and society, in the context of discussions about ethnodevelopment

Desenvolvimento de novos biolubrificantes hidráulicos derivados dos óleos de maracujá e de moringa in natura e epoxidados

With the increasing environmental awareness, maximizing biodegradability and minimizing ecotoxicity is the main driving force for new technological developments. Thus, can be developed new biodegradable lubricants for use in environmentally sensitive areas. The aim of this study was to obtain new bio-lubricants from passion fruit (Passiflora edulis Sims f. flavicarpa Degener) and moringa (Moringa oleifera Lamarck) epoxidized oils and develop a new additive package using experimental design for their use as a hydraulic fluid. In the first stage of this work was performed the optimization of the epoxidation process of the oils using fractional experimental design 24-1 , varying the temperature, reaction time, ratio of formic acid and hydrogen peroxide. In the second step was investigated the selectivity, thermodynamics and kinetics of the reaction for obtaining the two epoxides at 30, 50 and 70 °C. The result of the experimental design confirmed that the epoxidation of passion fruit oil requires 2 hours of reaction, 50 °C and a ratio H2O2/C=C/HCOOH (1:1:1). For moringa oil were required 2 hours reaction, 50 °C and a ratio of H2O2/C=C/HCOOH (1:1:1.5). The results of the final conversions were equal to 83.09% (± 0.3) for passion fruit oil epoxide and 91.02 (±0,4) for moringa oil epoxide. Following was made the 23 factorial design to evaluate which are the best concentrations of corrosion inhibitor and anti-wear (IC), antioxidant (BHA) and extreme pressure (EP) additives. The bio-lubricants obtained in this step were characterized according to DIN 51524 (Part 2 HLP) and DIN 51517 (Part 3 CLP) standards. The epoxidation process of the oils was able to improve the oxidative stability and reduce the total acid number, when compared to the in natura oils. Moreover, the epoxidized oils best solubilized additives, resulting in increased performance as a lubricant. In terms of physicochemical performance, the best lubricant fluid was the epoxidized moringa oil with additives (EMO-ADI), followed by the epoxidized passion fruit oil with additives (EPF-ADI) and, finally, the passion fruit in natura oil without additives (PFO). Lastly, was made the investigation of the tribological behavior under conditions of boundary lubrication for these lubricants. The tribological performance of the developed lubricants was analyzed on a HFRR equipment (High Frequency Reciprocating Rig) and the coefficient of friction, which occurs during the contact and the formation of the lubricating film, was measured. The wear was evaluated through optical microscopy and scanning electron microscopy (SEM). The results showed that the addition of extreme pressure (EP) and anti-wear and corrosion inhibitor (CI) additives significantly improve the tribological properties of the fluids. In all assays, was formed a lubricating film that is responsible for reducing the coefficient of metal-to-metal wear. It was observed that the addition of EP and IC additives in the in natura vegetable oils of passion fruit and moringa did not favor a significant reduction in wear. The bio-lubricants developed from passion fruit and moringa oils modified via epoxidation presented satisfactory tribological properties and shown to be potential lubricants for replacement of commercial mineral-based fluids.

A motivação de licenciandos em música sob a perspectiva da teoria da autodeterminação

This research had as main aim to verify the motivational quality of music students at four public universities in the Northeast of Brazil, based on the Self-Determination Theory (SDT). This perspective was proposed by Edward Deci and Richard Ryan (1985, 2000, 2008a, 2008b), and considers the qualitative aspects of motivation. It defends that the individuals have a natural tendency to self-regulation; it adopts the concept of internalizations through a continuum of self-determination conceived in the mini-theory of organismic integration. The research presents a descriptive, exploratory and correlational approach. To collect data, it was submitted a self-report questionnaire, based on the Academic Motivational Scale, translated and validated by Guimarães and Bzuneck (2008), which allow us to verify the motivation types according to a selfdeterminational continuum. According to this application, the instrument has shown evidence of satisfactory validity, with a good internal consistence and correlations from weak to moderate scale. The obtained data were collected from 380 music students, analyzed through a descriptive and inferential statistics, considering a few procedures: frequencies, averages, standard deviation, factorial analysis, internal consistence analysis through Cronbach Alpha, Pearson’s correlational analysis and variance analysis. The analyzed data show that high averages in the evaluation of self-determined motivation and low evaluation in demotivation and less autonomy motivation. Many students revealed strong intention to conclude the course. It was identified less autonomous motivation and more motivation among the students with intention to work in other areas, some of them concluded the final training process in Music Course, and say that they are in this course because they had no other option. We conclude that those graduated in Music Course, represented in this sample, show a good motivational quality. But after a few time there is a tendency in decreasing autonomous motivation because of some requirements of an academic course. In this sense, the courses must create strategies to maintain a self-determined behavior so that students can realize their autonomous motivation, identifying its importance, value and meaning along the Course.

Proteção em sistemas elétricos com geração distribuída utilizando a transformada wavelet

A typical electrical power system is characterized by centr alization of power gene- ration. However, with the restructuring of the electric sys tem, this topology is changing with the insertion of generators in parallel with the distri bution system (distributed gene- ration) that provides several benefits to be located near to e nergy consumers. Therefore, the integration of distributed generators, especially fro m renewable sources in the Brazi- lian system has been common every year. However, this new sys tem topology may result in new challenges in the field of the power system control, ope ration, and protection. One of the main problems related to the distributed generati on is the islanding formation, witch can result in safety risk to the people and to the power g rid. Among the several islanding protection techniques, passive techniques have low implementation cost and simplicity, requiring only voltage and current measuremen ts to detect system problems. This paper proposes a protection system based on the wavelet transform with overcur- rent and under/overvoltage functions as well as infomation of fault-induced transients in order to provide a fast detection and identification of fault s in the system. The propo- sed protection scheme was evaluated through simulation and experimental studies, with performance similar to the overcurrent and under/overvolt age conventional methods, but with the additional detection of the exact moment of the fault.

Cultura como desenvolvimento entre os Paresi Kozarini

The proposal of the present study is to get to know and to analyze the building up of the culture notion among the participants of the Paresi Kozarini group in the ethnodevelopment context. The main focus is the ethnographic study, presenting a description of Aldeia Rio Verde (Paresi Indigenous Land), understanding it as a synthesis of historic processes which explains the current moment of Paresi Indigenous group. By using the mentioned methodology, the processes and social relations produced along the contact path of this group with regional-national culture were focused, and how that contact affects the present. The research questions which concern the present study refer to the processes of identification of the researched subjects about themselves and in relation to others. According as almost the totality of the indigenous group we usually know as Paresi, recognize itself as Kozarini, the attention is directed to the manner how they see themselves and how they differ from the other Paresi groups, not indigenous people, and other indigenous groups; and which meanings of the prefix ethno- (which culture elements) they have elected to represent and manage external matters to their culture and society, in the context of discussions about ethnodevelopment