Análise de propriedades térmicas e mecânicas de compósitos de argamassa e resíduo de borracha

Although already to exist alternative technique and economically viable for destination of used tires, quantitative data on properties of constructive elements that use the rubber waste as aggregate still are restricted. In the present work, the waste proceeding from industry of retreading as material for manufacture of composite destined to the production of constructive elements was considered. Mechanical and thermal properties of mortar had been analyzed Portland cement with addition of waste without treatment, in the ratios of 10%, 20% and 30% in mass in relation to the mass of the cement, substituting the aggregate in the trace in mortar 1:5 mass cement and sand. The size of the used residue varied between 0,30mm and 4,8mm (passing in the bolter 4,8mm and being restrained in the one of 0,30mm), being it in the formats fibers and granular. The influences of the size and the percentage of residue added to the mortar (in substitution to the aggregate) in the thermal and mechanical properties had been considered. Assays of body-of-test in thestates had been become fullfilled cool (consistency index) and hardened (absorption of water for capillarity, strength the compression, traction and strength flexural). The work is centralized in the problem of the relation thermal performance /strength mechanics of used constructive systems in regions of low latitudes (Been of the Piauí), characterized for raised indices of solar radiation.

Estudo de uma coluna de absorção recheada para desidratação do gás natural utilizando microemulsão como absorvente

During natural gas processing, water removal is considered as a fundamental step in that combination of hydrocarbons and water favors the formation of hydrates. The gas produced in the Potiguar Basin (Brazil) presents high water content (approximately 15000 ppm) and its dehydration is achieved via absorption and adsorption operations. This process is carried out at the Gas Treatment Unit (GTU) in Guamaré (GMR), in the State of Rio Grande do Norte. However, it is a costly process, which does not provide satisfactory results when water contents as low as 0.5 ppm are required as the exit of the GTU. In view of this, microemulsions research is regarded as an alternative to natural gas dehydration activities. Microemulsions can be used as desiccant fluids because of their unique proprieties, namely solubilization enhancement, reduction in interfacial tensions and large interfacial area between continuous and dispersed phases. These are actually important parameters to ensure the efficiency of an absorption column. In this work, the formulation of the desiccant fluid was determined via phases diagram construction, employing there nonionic surfactants (RDG 60, UNTL L60 and AMD 60) and a nonpolar fluid provided by Petrobras GMR (Brazil) typically comprising low-molecular weight liquid hydrocarbons ( a solvent commonly know as aguarrás ). From the array of phases diagrams built, four representative formulations have been selected for providing better results: 30% RDG 60-70% aguarrás; 15% RDG 60-15% AMD 60-70% aguarrás, 30% UNTL L60-70% aguarrás, 15% UNTL L60-15% AMD 60-70% aguarrás. Since commercial natural gas is already processed, and therefore dehydrated, it was necessary to moister some sample prior to all assays. It was then allowed to cool down to 13ºC and interacted with wet 8-12 mesh 4A molecular sieve, thus enabling the generation of gas samples with water content (approximately 15000 ppm). The determination of the equilibrium curves was performed based on the dynamic method, which stagnated liquid phase and gas phase at a flow rate of 200 mL min-1. The hydrodynamic study was done with the aim of established the pressure drop and dynamic liquid hold-up. This investigation allowed are to set the working flow rates at 840 mL min-1 for the gas phase and 600 mLmin-1 for the liquid phase. The mass transfer study indicated that the system formed by UNTL L60- turpentine-natural gas the highest value of NUT

Investigando o campo magnético das estrelas análogas e gêmeas solares através da espectropolarimetria

This study proposes an observing program focused on the investigation of the stellar magnetism and dynamo evolution in cool active solar-like stars. More mainly in the solar analogs and twins. Observations of stars of our base were carried out with two spectropolarimeter (ESPaDOnS@CFHT and NARVAL@TBL). The analyse of stars in stage different allows an understanding of the dependence of magnetic activity on basic stellar parameters such as rotation, mass, age and depth of the convection zone. This study provides measures necessary for testing dynamo theories. The 65 targets for this project are solar type stars with mass spanning from 0:9 M=Mfi 1:075 solar masses and at different evolutionary stages. Our two main science objectives were, (i) To determine how the magnetic field evolved from the ZAMS to the TO (turn off) for stars with 0:9 M=Mfi 1:075; (ii) To determine the impact of convective depth and rotation on magnetic of cool stars of solar type. The main result from this study was the characterization of the dependence of magnetic field intensity as function of age, Rossby number and the convective zone deepening. This context, the availability of ESPaDOnS and NARVAL opens an exceptional possibility to study the magnetic properties of Sun-like stars by means of spectropolarimetric observations

Estudo da incorporação de resíduos de perfuração para aplicação em cimentação de poços de petróleo

During the drilling of oil and natural gas are generated solid waste, liquid and gaseous. These solid fragments, which are known as cuttings, are carried to the surface through the drilling fluid. Furthermore, this fluid serves to cool the bit, keeping the internal pressure of the well, and others. This solid residue is very polluting, because it has incorporated beyond the drilling fluid, which has several chemical additives harmful to the environment, some heavy metals that are harmful to the environment, such as lead. To minimize the residue generated, are currently being studied numerous techniques to mitigate the problems that such waste can cause to the environment, like addition of cuttings in the composition of soil cement brick masonry construction, addition of cuttings on the clay matrix for the manufacture of solid masonry bricks and ceramic blocks and coprocessing of the cuttings in cement. So, the main objective of this work is the incorporation of cuttings drilling of oil wells, the cement slurry used in the cementing operation of the well. This cuttings used in this study, arising from the formation Pendências, was milled and separated in a sieve of 100 mesh. After grinding had a mean particle sike in order of 86 mm and crystal structure containing phases of quartz and calcite type, characteristic of the Portland cement. Were formulated and prepared slurries of cement with density 13 lb / gal, containing different concentrations of gravel, and realized characterization tests API SPEC 10A and RP 10B. Free water tests showed values lower than 5.9% and the rheological model that best described the behavior of the mixtures was the power. The results of compressive strength (10.3 MPa) and stability (Dr <0.5 lb / gal) had values within the set of operational procedures. Thus, the gravel from the drilling operation, may be used as binders in addition to Portland cement oil wells, in order to reuse this waste and reduce the cost of the cement paste.

Efeito agudo do exercício aeróbio vigoroso sobre as funções executivas em adolescentes

Executive functions are determinant cognitive processes for student success, since they execute and control complex cognitive activities such as reasoning, planning and solving problems. The development of the executive functions performances begin early at childhood going through the adolescence until adulthood, concomitant with the neuroanatomical, functional and blood perfusion changes over the brain. In this scenario, exercise has been considered an important environmental factor for neurodevelopment, as well as for the promotion of cognitive and brain health. However, there are no large scientific studies investigating the effects of a single vigorous aerobic exercise session on executive functions in adolescents. Objective: To verify the acute effect of vigorous aerobic exercise on executive functions in adolescents. Methods: A randomized controlled trial (RCT) with crossover design was used. 20 pubescent from both sexes/gender with age between 10 and 16 years were submitted to two sessions of 30min each: 1) The aerobic exercise session intensity was between 65 and 75% of heart rate reserve, in which 5min for warm-up, 20min at the target intensity and 5min of cool down; and 2) control session watching cartoons. The computerized Stroop test – Testinpacs and trail making test were used to evaluate the inhibitory control and cognitive flexibility assessment respectively, before and after both experimental and control sessions. The reaction time (RT) and number of errors (n) of Stroop test were recorded. The total time (TT) and the number of errors (n) of the trail making test were also recorded. Results: The control session’s RT did not present significant differences in the Stroop test. On the other hand, the exercise session’s RT decreased significantly (p<0.01) after the session. The number of errors made at the Stroop test had no significant differences in control and exercise sessions. The ΔTT of trail making test of exercise session was significantly (p<0.001) lower than the control session’s. Errors made in trail making test did not show significant differences between control and exercise sessions. Additionally, there was significant and positive association among the Stroop test ΔRT of exercise session with xiii chronological age (r= 0.635, p=0.001; r 2 = 0.404, p=0.003) and sexual maturation (rs= 0.580, p=0.007; r 2 = 0.408, p=0.002). Differently, there was no association among the control session ΔRT and chronological age (r= – 0.144, p=0.273; r 2 = 0.021, p=0.545) or sexual maturation (rs= –0.155, p=0.513; r 2 = 0.015, p=0.610). Conclusion: Vigorous aerobic exercise seems to improve acutely executive functions in adolescents. The effect of exercise on inhibitory control performance was associated to pubertal stage and chronological age. In other words, the benefits of exercise were more evident in early adolescence (↑ ΔRT) and its magnitude decreases along the growing up process.

Análise wavelet e modelo de manchas em curvas de luz estelares dos telescópios espaciais Kepler e CoRoT

Analogous to sunspots and solar photospheric faculae, which visibility is modulated by stellar rotation, stellar active regions consist of cool spots and bright faculae caused by the magnetic field of the star. Such starspots are now well established as major tracers used to estimate the stellar rotation period, but their dynamic behavior may also be used to analyze other relevant phenomena such as the presence of magnetic activity and its cycles. To calculate the stellar rotation period, identify the presence of active regions and investigate if the star exhibits or not differential rotation, we apply two methods: a wavelet analysis and a spot model. The wavelet procedure is also applied here to study pulsation in order to identify specific signatures of this particular stellar variability for different types of pulsating variable stars. The wavelet transform has been used as a powerful tool for treating several problems in astrophysics. In this work, we show that the time-frequency analysis of stellar light curves using the wavelet transform is a practical tool for identifying rotation, magnetic activity, and pulsation signatures. We present the wavelet spectral composition and multiscale variations of the time series for four classes of stars: targets dominated by magnetic activity, stars with transiting planets, those with binary transits, and pulsating stars. We applied the Morlet wavelet (6th order), which offers high time and frequency resolution. By applying the wavelet transform to the signal, we obtain the wavelet local and global power spectra. The first is interpreted as energy distribution of the signal in time-frequency space, and the second is obtained by time integration of the local map. Since the wavelet transform is a useful mathematical tool for nonstationary signals, this technique applied to Kepler and CoRoT light curves allows us to clearly identify particular signatures for different phenomena. In particular, patterns were identified for the temporal evolution of the rotation period and other periodicity due to active regions affecting these light curves. In addition, a beat-pattern vii signature in the local wavelet map of pulsating stars over the entire time span was also detected. The second method is based on starspots detection during transits of an extrasolar planet orbiting its host star. As a planet eclipses its parent star, we can detect physical phenomena on the surface of the star. If a dark spot on the disk of the star is partially or totally eclipsed, the integrated stellar luminosity will increase slightly. By analyzing the transit light curve it is possible to infer the physical properties of starspots, such as size, intensity, position and temperature. By detecting the same spot on consecutive transits, it is possible to obtain additional information such as the stellar rotation period in the planetary transit latitude, differential rotation, and magnetic activity cycles. Transit observations of CoRoT-18 and Kepler-17 were used to implement this model.

Petrologia do Plutão Bom Jardim de Goiás (PBJG): implicação na evolução neoproterozoica da Província Tocantins

The Bom Jardim de Goiás Pluton (PBJG) is a semi-circular body, located in the central portion of the Tocantins Province, intrusive into orthogneisses and metassupracrustals of the Arenópolis Magmatic Arc. These metasupracrustals present a low to moderate dipping banding or schistosity, have a low to moderate angle of banding / foliation, defined by mica, andalusite and sillimanite and cordierite, which characterize an amphibolite facies metamorphism. This structure is crosscut by the emplacement of the PBJG rocks. The abrupt nature of the contacts and the absence of ductile structures indicate that the intrusion took place in a relatively cold crust. Under petrographic grounds, the pluton consists mainly of monzodiorites, tonalite and granodiorite, following the low to medium-K calk-alkaline alkaline trend. Rocks of the PBJG have hornblende and biotite as the main mafic phases, besides subordinate clinopyroxene, titanite, epidote and opaque. Late dikes of leucogranite contain only mineral biotite as relevant accessory mineral. One U-Pb zircon dating of a monzodiorite yielded an age of 550 ± 12 Ma (MSWD = 1.06). Whole-rock and mineral chemistry suggest that the studied rocks are calc-alkaline, having evolved by fractional crystallization of Ca- and Fe-Mg minerals under high oxygen fugacity. Using the amphibole-plagioclase geothermometer and the Al-in amphibole geobarometer, we calculate temperatures and pressures of, respectively, 692-791 °C e 2.4-5.0 kbar for the intrusion of the PBJG, which is corroborated by previous metamorphic assemblages in the country rocks. The geological, geochemical and geochronological features of PBJG demonstrate their post-tectonic or post-collisional nature, with emplacement into an already uplifted and relatively cool crust at the end of brasiliano orogeny in this portion of the Tocantins Province.

Petrologia do Plutão Bom Jardim de Goiás (PBJG): implicação na evolução neoproterozoica da Província Tocantins

The Bom Jardim de Goiás Pluton (PBJG) is a semi-circular body, located in the central portion of the Tocantins Province, intrusive into orthogneisses and metassupracrustals of the Arenópolis Magmatic Arc. These metasupracrustals present a low to moderate dipping banding or schistosity, have a low to moderate angle of banding / foliation, defined by mica, andalusite and sillimanite and cordierite, which characterize an amphibolite facies metamorphism. This structure is crosscut by the emplacement of the PBJG rocks. The abrupt nature of the contacts and the absence of ductile structures indicate that the intrusion took place in a relatively cold crust. Under petrographic grounds, the pluton consists mainly of monzodiorites, tonalite and granodiorite, following the low to medium-K calk-alkaline alkaline trend. Rocks of the PBJG have hornblende and biotite as the main mafic phases, besides subordinate clinopyroxene, titanite, epidote and opaque. Late dikes of leucogranite contain only mineral biotite as relevant accessory mineral. One U-Pb zircon dating of a monzodiorite yielded an age of 550 ± 12 Ma (MSWD = 1.06). Whole-rock and mineral chemistry suggest that the studied rocks are calc-alkaline, having evolved by fractional crystallization of Ca- and Fe-Mg minerals under high oxygen fugacity. Using the amphibole-plagioclase geothermometer and the Al-in amphibole geobarometer, we calculate temperatures and pressures of, respectively, 692-791 °C e 2.4-5.0 kbar for the intrusion of the PBJG, which is corroborated by previous metamorphic assemblages in the country rocks. The geological, geochemical and geochronological features of PBJG demonstrate their post-tectonic or post-collisional nature, with emplacement into an already uplifted and relatively cool crust at the end of brasiliano orogeny in this portion of the Tocantins Province.

Análise de propriedades térmicas e mecânicas de compósitos de argamassa e resíduo de borracha

Although already to exist alternative technique and economically viable for destination of used tires, quantitative data on properties of constructive elements that use the rubber waste as aggregate still are restricted. In the present work, the waste proceeding from industry of retreading as material for manufacture of composite destined to the production of constructive elements was considered. Mechanical and thermal properties of mortar had been analyzed Portland cement with addition of waste without treatment, in the ratios of 10%, 20% and 30% in mass in relation to the mass of the cement, substituting the aggregate in the trace in mortar 1:5 mass cement and sand. The size of the used residue varied between 0,30mm and 4,8mm (passing in the bolter 4,8mm and being restrained in the one of 0,30mm), being it in the formats fibers and granular. The influences of the size and the percentage of residue added to the mortar (in substitution to the aggregate) in the thermal and mechanical properties had been considered. Assays of body-of-test in thestates had been become fullfilled cool (consistency index) and hardened (absorption of water for capillarity, strength the compression, traction and strength flexural). The work is centralized in the problem of the relation thermal performance /strength mechanics of used constructive systems in regions of low latitudes (Been of the Piauí), characterized for raised indices of solar radiation.