Ecologia alimentar e comportamento de forrageamento de Ameivula aff. ocellifera (Squamata: Teiidae) em área de caatinga do nordeste do Brasil

This study investigated the influence of intrinsic and extrinsic factors on the feeding ecology and foraging behavior of the whiptail lizard Ameivula aff. ocellifera, a new species widely distributed in the Brazilian Caatinga, and that is in process of description. In attendance to the objectives, the Dissertation was structured in two chapters, which correspond to scientific articles, one already published and the other to be submitted for publication. In Chapter 1 were analyzed the general diet composition, the relationship between lizard size and prey size, and the occurrence of sexual and ontogenetic differences in the diet. Chapter 2 contemplates a seasonal analysis of diet composition during two rainy seasons interspersed with a dry season, and the quantitative analysis of foraging behavior during two distinct periods. The diet composition was determined through stomach analysis of lizards (N = 111) collected monthly by active search, between September 2008 and August 2010, in the Estação Ecológica do Seridó (ESEC Seridó), state of Rio Grande do Norte. Foraging behavior was investigated during a rainy and a dry month of 2012 also in ESEC Seridó, by determining percent of time moving (PTM), number of movements per minute (MPM) and prey capture rate by the lizards (N = 28) during foraging. The main prey category in the diet of Ameivula aff. ocellifera was Insect larvae, followed by Orthoptera, Coleoptera and Araneae. Termites (Isoptera) were important only in numeric terms, having negligible volumetric contribution (<2%) and low frequency of occurrence, an uncommon feature among whiptail lizards. Males and females did not differ neither in diet composition nor in foraging behavior. Adults and juveniles ingested similar prey types, but differed in prey size. Maximum and minimum prey sizes were positively correlated with lizard body size, suggesting that in this population individuals experience an ontogenetic change in diet, eating larger prey items while growing, and at the same time excluding smaller ones. The diet showed significant seasonal differences; during the two rainy seasons (2009 and 2010), the predominant prey in diet were Insect larvae, Coleoptera and Orthoptera, while in the dry season the predominant prey were Insect larvae, Hemiptera, Araneae and Orthoptera. The degree of mobility of consumed prey during the rainy seasons was lower, mainly due to a greater consumption of larvae (highly sedentary prey) during these periods. Population niche breadth was higher in the dry season, confirming the theoretical prediction that when food is scarce, the diets tend to be more generalized. Considering the entire sample, Ameivula aff. ocellifera showed 61,0 ± 15,0% PTM, 2,03 ± 0,30 MPM, and captured 0,13 ± 0,14 per minute. Foraging mode was similar to that found for other whiptail lizards regarding PTM, but MPM was relatively superior. Seasonal differences were verified for PTM, which was significantly higher in the rainy season (66,4 ± 12,1) than in the dry season (51,5 ± 15,6). It is possible that this difference represents a behavioral adjustment in response to seasonal variation in the abundance and types of prey available in the environment in each season

Ecologia comportamental de tropidurus Hispidus e Tropidurus Semitaeniatus (Squamata, Tropiduridae) em Simpatria, em área de caatinga do nordeste do Brasil.

This study evaluated the spatial, time and alimentary niches of Tropidurus hispidus and Tropidurus semitaeniatus in sympatry in a caatinga of Rio Grande do Norte, Brazil, as well as their foraging and termoregulatory behaviors, the activity body temperature and their reproductive and fat body cycles. Monthly excursions, from October 2006 to May 2008, were conducted at the Ecological Station of the Seridó (ESEC Seridó), Serra Negra do Norte municipality, using specific methodology for investigation of the aforementioned objectives. The two species presented similarities in space niche use, mainly in rocky habitat, however they differed in vertical microhabitat use with T. hispidus using a larger vertical microhabitat range. In the dry season the time of activity of both species was bimodal. In the wet season T. semitaeniatus showed a unimodal activity period, while T. hispidus maintained an bimodal activity period. In terms of importance in the diet, to both species, Hymenoptera/Formicidae and Isoptera predominated during the dry season. In the wet season, although Hymenoptera/Formicidae had larger importance among the prey items, lizards opportunistically predated on Lepidoptera larvae, Coleoptera larvae/adults and Orthoptera nymphs/adults. The foraging intensity revealed differences between the species, mainly in the wet season, when T. semitaeniatus was more active than T. hispidus. The mean activity body temperature of T. semitaeniatus was significantly higher than that of T. hispidus. The thermoregulatory behavior showed that during the dry season T. hispidus and T. semitaeniatus spent more time in shade or under filtered sun. In the wet season, T. hispidus did not show differences in the amount of time spent among the light exposure locations, however T. semitaeniatus spent most of their time exposed to direct sun or filtered sun. The reproductive cicle of T. hispidus and T. semitaeniatus occurred from the middle of the dry season to the beginning of the wet season. In both species, female reproductive activity was influenced by precipitation, whereas males exhibited spermatozoa in their testes throughout the year, and their reproductive activity was not related with any of the climatic variables analysed. In the two species, the fat storage varied inversely with reproductive activity, and there was no difference in fat body mass between females and males. We concluded that the segregation between T. hispidus and T. semitaeniatus in this caatinga area occurs in vertical space use, in the largest vagility of T. hispidus in microhabitat use and larger range size of their alimentary xviii items. Additionally, significant seasonal differences in relation to the activity period, body temperature, and foraging and termoregulatory behaviors between these two Tropidurus species facilitate their coexistence.

A cultura organizacional influenciando o comportamento do capital humano na biblioteca universitária

DUARTE, E. N. ; CARVALHO, Andréa Vasconcelos ; PINHEIRO, E. G. ; CARVALHO, Luciana Moreira ; NOGUEIRA, N. M. F. . A cultura organizacional influenciando o comportamento do capital humano na biblioteca universitária. Informação & Sociedade. Estudos, João Pessoa - PB, v. 10, n. 2, p. 190-210, 2000

Comportamento de compra por impulso em shopping centers: pesquisa com consumidores de Brasília-DF e Natal-RN

ARAUJO, G. P. ; RAMOS, A. S. M. . Comportamento de Compra por Impulso em Shopping Centers: pesquisa com Consumidores de Brasília-DF e Natal-RN. REAd. Revista Eletrônica de Administração (Porto Alegre. Online) , v. 16, p. 343-364, 2010.

Definições para o resultado de enfermagem comportamento de prevenção de quedas: uma revisão integrativa

Devido à necessidade de mensurar o risco de quedas em concordância à linguagem padronizada de enfermagem, foi selecionado o resultado de enfermagem Comportamento para Prevenção de Quedas da Nursing Outcomes Classification (NOC), com objetivo de identificar evidências sobre seus elementos, mensuração, comparação com indicadores existentes e construir definições constitutivas. Foi efetuada revisão integrativa entre abril e novembro de 2009, mediante identificação da questão, estabelecimento de critérios de inclusão/exclusão, extração das informações, avaliação, interpretação e síntese. Destacaram-se pesquisas transversais e perspectivas de especialistas. Os indicadores Uso de recursos de correção da visão e Uso de sapatos amarrados e do tamanho adequado foram considerados insuficientes para avaliar fatores de risco como déficits sensoriais e roupas/calçados inadequados. Percebe-se que algumas definições precisam ser melhor desenvolvidas e que esse resultado de enfermagem merece refinamento sobretudo referente aos indicadores. Foram identificados 22 indicadores e definições foram propostas baseadas nas evidências da literatura

Do tratamento das reclamações à gestão da insatisfação: o comportamento de empresas hoteleiras mediante a insatisfação de seus clientes

Consumer dissatisfaction, when properly handled, is a significant information source for the manager. Studies in this area allow broadening the understanding of certain customer attitudes and behaviors, such as loyalty, repurchase intention or satisfaction and trust increase. Above and beyond supporting consumer feedback, dissatisfaction can provide significant opportunities for organizational learning. Starting from dissatisfied customer information, companies can detect service flaws and develop new products. This work presents the results of an investigation on the behavior of businesses belonging to the hotel sector in Natal, RN, through the dissatisfaction of their customers. We have sought to map the main problems presented by customers to hotels, in the perception of managers and employees, as well as to understand both the process of dissatisfactionrelated data collection, analysis, and processing, and the utilization of such information by businesses. Beyond this, we have compared the habits of organizations to the company reaction approaches described in the literature: Complaint Handling, Complaint Management, and Dissatisfaction Management. The used methodology has been based on case study. Data was collected via indepth interviews with managers and employees in six hotels, two independent ones and four belonging to national and international hotel networks. We have also made use of documents provided by the organizations, such as guest complaint registers and reports from satisfaction surveys on which content analysis was subsequently performed. The results of the investigation point to a high level of awareness in the companies concerning the importance of consumer dissatisfaction. Even though the maximum grade in the procedure scale is not achieved, it has been observed that answer to dissatisfaction is given in planned and systematic form, geared towards consumer satisfaction and improvement of products and processes. Hotel businesses still have to look into other possibilities for mapping consumer dissatisfaction, which implies, among other aspects, articulation with a range of public and private organizations in such a way as to guarantee sustainability of touristic activities in the long term

Comportamento do consumidor: um estudo do mercado imobiliário em condomínios verticais fechados na região metropolitana de Natal

The research in question looked for to establish the relation between the motivation (of the proprietor of apartment) to change itself of another one apartment, in closed vertical condominium (residential mobility) in the period of the recognition of the necessity, and the satisfaction with the apartment after consume. The universe or the population chosen for the development of the study was of proprietors of apartment in vertical condominiums located in the region metropolitan of Natal. The analysis of data was made using the techniques of linear regression and logistic regression between variables. The linear regression found relations between the motivations for housing change and the satisfaction in after consume with some attributes of the apartment. The logistic regression showed that relations between the motivations for change and the general satisfaction to the apartment exist as a whole, in the period after consumes. With regard to the motivation to change itself of a apartment for another one, some reasons shown more motivation them the others. The research found different degrees of satisfaction with certain characteristics of the apartment and degrees of no satisfaction with others. Finally the results of the research had contributed for the reply of the problem that guided the present study, therefore had obtained in such a way to find how much logistic not linear relations between the two periods purchase (recognition of the necessity and evaluation after consume) and had elucidated the process that goes since the choice the product until the satisfaction of the necessities

Análise do comportamento e crescimento do camarão branco Litopenaeus vannamei (Boone, 1931) em diferentes substratos inconsolidados

The aim of this study was to test the sediment preference of L. vannamei shrimp. It was observed shrimp visit frequency, swimming and burying behaviour at different sediment compositions for 24h. Juvenile (0.93 ± 0.29g) and sub-adult shrimps (10.0 ± 1.18g) were obtained from the aquaculture station at Universidade Federal Rural do Semi-Árido UFERSA, and held in a plastic tank (water volume 500 L) supplied with aerated water and kept at constant temperature, pH, and salinity. Shrimp was fed by commercial shrimp dry food. The experimental substrates were composed by A: medium sand + thick sand + very thick sand + gravel; B: very fine sand + fine sand; and C: silt + clay. Thus, six different substrate combinations were tested: A, B, C, A+B, A+C, B+C. To test preference, it was used a cylindrical tank (40 l) divided into six differently substrate compartments. A single shrimp was introduced each tank and the frequency at which this shrimp visited each compartment was recorded over a 24h study period. It was tested 54 shrimp (18 sub-adult males, 18 subadult females and 18 juveniles). For each trial, sediment and water were changed to avoid pheromones and residues influence. Shrimp were weighted and sub-adults were divided by sex: males present petasma and females present thelycum. Data were collected on the experimental day at 19:30; 20:30; 00:30; 1:30; 05:30; 06:30; 13:30 and 14:30 h. At each time point, shrimp were observed for 20-min periods, in which we noted down which compartment the shrimp was occupying at 2-min intervals. Thus, for each period we had eleven observations (88 observations per day). For observations at night, it was used dim red light that did not affect shrimp behaviour. At each 20-min period, it was observed visit frequency in each substrate, if shrimp was burred or not or if it was swimming. There was not significant difference between light and dark burry activity for females. Swimming activity was significantly higher at night, mainly at 00:30 and 01:30 h. All L. vannamei shrimp showed preference for sediment B. This animal presents cyclic activity, spends the day light period buried and swims at night

Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais

There are ores of clay in Piauí State that are used for red structural ceramics, which are naturally contaminated with calcareous vein. This is one thing that impedes its exploration in an adequate way, especially for tile production. The present work aims at verifying the influence of the calcareous contents in the technological structural ceramics area, seeking to determine a maximum permissible calcareous proportion/contents in the ceramic mass using the patterns of the local industry production. For the consecution of this paper, it was characterized the clay and calcareous material by FRX, DRX, TGA and DTA. It was also configurated by extrusion and burnt in the temperatures of 850°C, 900°C, 950°C and 1000°C pieces of the corpus with 0, 5, 10, 15 e 20% of calcareous proportion. After that, it was carried out technological samples of linear retraction, water absortion, apparent porosity, specific apparent mass and mechanic resistance. The results showed the possibility of using calcareous in the ceramic mass and in some cases the technological properties got better

Análise do comportamento reológico de pastas de cimento contendo resíduos de pneu para poços de petróleo

The low tenacity presented by the Portland cement pastes used in the oil wells cementation has been motivating several researches with attention focused on alternative materials. Additives have been developed to generate flexible pastes with mechanical resistance capable to support the expansions and retractions of the metallic covering of the wells that submit to the steam injection, technique very used to increase the recovery factor in oil reservoirs with high viscosity. A fresh paste with inadequate rheological behavior may commit the cementation process seriously, involving flaws that affect the performance of the paste substantially in the hardened state. This work proposes the elaboration and the rheological analysis of Portland cement pastes with addition of residues of rubber tire in several proportions, with the aim of minimizing the damages provoked in the hem cementing of these wells. By thermogravimetric analysis, the particles of eraser that go by the sieve of 0,5mm (35 mesh) opening and treated superficially with NaOH solution of 1 mol/L presented appropriate thermal resistance for wells that submit to thermal cyclic. The evaluation of the study based on the results of the rheological analysis of the pastes, complemented by the mechanical analysis, thickening, stability, tenor of free water and filtrate loss, being used as parameter a paste reference, without rubber addition. The results showed satisfactory rheology, passive of few corrections; considerable loss of mechanical resistance (traction and compression), compensated by earnings of tenacity, however with established limits for its application in oil wells; satisfactory stability, free water and thickening time

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Membrana de alumina anódica: comportamento da microestrutura e estudo das propriedades ópticas após tratamento térmico

Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study

Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures

Comportamento reológico de materiais cimentícios para poços de petróleo contendo naftaleno condensado ou policarboxilato

Pastas a base de cimento Portland são utilizadas na cimentação de poços de petróleo. Elas consistem de uma mistura de partículas sólidas de cimento dispersas em água e aditivos. Atualmente, diversos materiais alternativos são utilizados como aditivos, objetivando a modificação e a melhoria das propriedades das pastas de cimento, especialmente no aumento da fluidez. Novos aditivos plastificantes são capazes de suportar as diversas condições de poços, promovendo propriedades no estado fluido compatíveis às condições exigidas para cimentação.Dispersantes são os componentes da pasta que garantem fluidez, além de proporcionar controle na água perdida por filtração na formação porosa, garantindo o sucesso da operação de bombeio. Em deter minados campos, além do efeito da profundidade, as condições geológicas das formações promovemvariações do gradiente de pressão e temperatura ao longo da profundidade vertical do poço. Recentemente, diversos aditivos químicos da indústria da construção civil tem sido estudados em condições de cimentação de poços de petróleo. Vários produtos testados tem apresentado desempenho superior aos produtos normalmente empregados pela indústria de petróleo com boa relação custo/benefício em função do volume de mercado da construção civil. Resultados promissores na seleção de aditivos com função dispersante da construção civil para operações de cimentação de poços de petróleo onshore foram obtidos para temperaturas até 80°C. O potencial de uso desses aditivos permite estabelecer novas soluções para problemas encontrados na cimentação de poços de petróleo HPHT, poços sujeitos à injeção de vapor, poços depletados e poços produtores de gás. Na construção civil, os superplastificantes permitem reduzir o fator água/cimento das argamassas proporcionando melhoria de propriedades como resistência mecânica e fluidez. Assim, o objetivo deste trabalho foi o estudo e a caracterização reológica de pastas constituídas de cimento Portland, água e aditivos do tipo plastificante, com função dispersante a base de naftaleno condensado e policarboxilato, na faixa de temperaturas de 58°C e 70ºC. As condições utilizadas para a avaliação dos aditivos alternativos foram baseadas em uma cimentação primária para um poço hipotético de 2200 m de profundidade e gradientes geotérmicos de 1,7°F/100 pés e 2,1°F/100 pés. Os resultados demonstraram a grande eficiência e o poder dispersivo do policarboxilato para as temperaturas estudadas. O aditivo promoveu alta fluidez, sem efeitos de sedimentação da pasta. O dispersante à base de naftaleno reduziutant o a viscosidade plástica como o limite de escoamento acimada concentração a partir de 0,13%. O modelo de Bingham descreveu bem o comportamento reológico das pastas com policarboxilato para todas as concentrações

Comportamento da adição do carbeto de nióbio (nBC) na matriz metálica do aço ferrítico 15kH2mfa

The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure