2 resultados para ageing and wellbeing

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

80.00% 80.00%

Publicador:

Resumo:

The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Neurodegenerative diseases are frequently studied due to the increasing number of cases associated with the populational ageing and to the impact on the conditions on the quality of life. Parkinson’s disease (DP) is the second most frequent neurodegenerative disease. Despite the fact that its etiology is not completely understood, it is known that DP is caused by environmental and genetic factors. Thus, the investigation of etiologic factors and mechanisms responsible for the changes that lead to DP may help early diagnostic and prevention. A possible association between DP and the common polymorphism of Brain Derived Neurotrophic Factor (BDNF) G196A (Val66Met) has been suggested by different studies with contrasting results. For this reason, the aim of this study is to investigate if the BDNF Val66Met polymorphism is related to susceptibility to DP in a cohort of Brazilian patients. Additionaly, we verify if the presence of the polymorphism implies in alterations in the BDNF whole blood concentrations, as well as variations in symptomatology. The sample comprised Brazilian patients accompanied by the neurology service of the Onofre Lopes University Hospital (HUOL) and healthy controls (CTRL). The motor aspects of DP were evaluated by Hoehn e Yahr Scale (HY), Unified Parkinson’s Disease Rating Scale (UPDRS) and Schwab & England Scale (SE). For the evaluation of non-motor symptoms were used the following instruments: Frontal Assessment Battery (BAF), Mini-Mental State Examination (MEEM), Beck Depression Inventory (IDB) and the Beck Anxiety Inventory (IAB). Blood samples were collected for BDNF Val66Met polymorphism genotyping and BDNF whole blood measurement. As expected, DP patients performed worse in motor, cognitive and emotional battery of questionnaires. Alleles distribution between DP and CTRL was not significantly different, but the A/G genotype was significantly associated with a protector factor for DP. In contrast, the G/G genotype was significantly associated with depression and anxiety development in DP patients. However, BDNF concentrations were not different between genotypes or groups. This is the first study of genetic association of this polymorphism with DP in Brazilian subjects and the first one that associate A/G genotype with protection against DP.