7 resultados para Wilson, James, 1759 or 60-1814.
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The mothers supplementation of vitamin A in the postpartum comes being a measure of intervention sufficiently used in the combat to the vitamin deficiency. The objective of this work was to evaluate the effect of the mother megadose of vitamin A under the levels of retinol in colostrum of postpartum mothers receiving care at the Januário Cicco Maternity School (MEJC), Natal, RN, as well as analyzing the influence of the maternal nutritional status in the reply to this supplementation. The study it was transversal type, with participation of 91 women in labor divided in group had participated of the study have controlled (44 women) and supplemented group (47 women). In the period of the morning blood and milk had been collected (milk 0h). After that a capsule of retinil palmitate of (200 000 UI or 60 mg) was supplied to the supplemented group. Another aliquot of colostro was after gotten 24h of the first collection (milk 24h). Retinol in milk and serum was quantified through the High Pressure Liquid Chromatography. The vitamin ingestion was evaluated by the questionnaire of frequency of alimentary consumption. The levels of serum retinol were 40.6 ± 10.6 and 35.9 ± 10.9 µg/dL in the groups controlled and supplemented, respectively. The women had presented a satisfactory average ingestion of vitamin (1492,4 µgRAE/dia), however with high prevalence of inadequate consumption (23%). Average values of retinol in milk 0h had been found and 24h of 93.5 ± 50.3 µg/dL and 99.1 ± 49.3 µg/dL has the group controlled group, respectively (p>0.05). After the supplementation had a significant increase in the levels of retinol of the supplemented group, being found values of 102.0 ± 56.0 µg/dL and 196.1 ± 74.0 µg/dL for milk 0h and 24h, respectively (p<0.0001). The women in labor presented different answers to the supplementation influenced for the basal levels of retinol in colostrum. It was possible to verify that women with deficient levels of retinol in milk had transferred more retinol to milk 24h than ones with adjusted levels, showing a percentage of reply equivalent to 326.1% and 86.5% of increase, respectively (p< 0.0001). Although the apparent normality found in the serum, the studied women are considered of risk to the development of the vitamin deficiency, and megadose was efficient in first 24h after the supplementation and wakes up with the mechanisms considered for transference of vitamin A to the milk
Resumo:
The mothers supplementation of vitamin A in the postpartum comes being a measure of intervention sufficiently used in the combat to the vitamin deficiency. The objective of this work was to evaluate the effect of the mother megadose of vitamin A under the levels of retinol in colostrum of postpartum mothers receiving care at the Januário Cicco Maternity School (MEJC), Natal, RN, as well as analyzing the influence of the maternal nutritional status in the reply to this supplementation. The study it was transversal type, with participation of 91 women in labor divided in group had participated of the study have controlled (44 women) and supplemented group (47 women). In the period of the morning blood and milk had been collected (milk 0h). After that a capsule of retinil palmitate of (200 000 UI or 60 mg) was supplied to the supplemented group. Another aliquot of colostro was after gotten 24h of the first collection (milk 24h). Retinol in milk and serum was quantified through the High Pressure Liquid Chromatography. The vitamin ingestion was evaluated by the questionnaire of frequency of alimentary consumption. The levels of serum retinol were 40.6 ± 10.6 and 35.9 ± 10.9 µg/dL in the groups controlled and supplemented, respectively. The women had presented a satisfactory average ingestion of vitamin (1492,4 µgRAE/dia), however with high prevalence of inadequate consumption (23%). Average values of retinol in milk 0h had been found and 24h of 93.5 ± 50.3 µg/dL and 99.1 ± 49.3 µg/dL has the group controlled group, respectively (p>0.05). After the supplementation had a significant increase in the levels of retinol of the supplemented group, being found values of 102.0 ± 56.0 µg/dL and 196.1 ± 74.0 µg/dL for milk 0h and 24h, respectively (p<0.0001). The women in labor presented different answers to the supplementation influenced for the basal levels of retinol in colostrum. It was possible to verify that women with deficient levels of retinol in milk had transferred more retinol to milk 24h than ones with adjusted levels, showing a percentage of reply equivalent to 326.1% and 86.5% of increase, respectively (p< 0.0001). Although the apparent normality found in the serum, the studied women are considered of risk to the development of the vitamin deficiency, and megadose was efficient in first 24h after the supplementation and wakes up with the mechanisms considered for transference of vitamin A to the milk
Resumo:
Brazilian architecture was recognized because of the consecration of the icons of the Carioca and Paulista schools which are represented nationally and internationally by names like Niemeyer, Lucio Costa and Vilanova Artigas, among others. Because of this, classic studies dedicated to the Brazilian case look to present the Southeastern region with the title of father of modern Brazil, at the cost of subjugating various other modern movements and peripheral sayings, whether their values are known or forgotten. On the other hand, there has been an effort, in the sense of registering and analyzing these regional productions of modern Brazilian architecture, an assignment that DOCOMOMO Brasil participates firmly through initiatives like the creation of a Library to aid in the documentation and registration of modernity in Brazil. Inside this context of insertions of the National-Modern scheme, this work has as its objective to present modern potiguar (northern Brazil) architecture through its contemporary residential examples, investigating specifically its constructive, formal aspects, that together that together demonstrate one more architectural emphasis of modern Brazilian architecture: the potiguar. This way, by contributing to the work of the register and the documentation of the Modern Movement and attributing to the modern architecture of Natal it s real worth, we can say: Yes, we have modern architecture
Resumo:
The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue
Resumo:
The marble and granite waste come from the process of mining of those ornamental rocks for use in the building industry. Brazil is one of the largest producers of blocks or finished products of ornamental rocks, extracting about 5.2 tons / year. The largest national producers are the states of Espírito Santo, Minas Gerais and Bahia which account for 80% of the Brazilian production. However, the waste total amount during processing of these blocks reaches 40% of the total. The use of the waste produced by this industry in white ceramics could be a form of disposition, because these materials, are thrownasa mud directly at decantation ponds, wastelands or in rivers, without any treatment. The present work has as main purpose to study the influence that reject of the ornamental rocks on the physical and mechanical properties of white ceramics. X-Ray characterizations of raw materials by were performed X-Ray fluorescence, X-Ray diffraction, granulometric, thermogravimetric and thermodiferencial analysis, five formulations were made (0, 10, 20, 30, 40% in granite weight) wich were burned at three temperatures: 1100°C, 1150°C and 1200ºC with 60 minutes of sorling time. After sintering, the samples were submitted to different analyser absorption of water, linear retraction, apparent porosity, apparent specific mass, flexival stronght, and scanning were obtained microscopy. Compatible technological properties within the limits demanded for the production of porcelainized stoneware
Resumo:
Among the waste generated in the petrochemical industry water associated with oil production is the most important. It is considered one of the great challenges due to the presence of considered toxic chemicals present in this composition. The presence of these substances difficult to reuse the water associated with the enhanced recovery processes, so that prior to their reuse or disposal, treatment is necessary. This paper aimed to study the removal efficiency of chemical species: Ba2+, Ni2+, Cd2+, Cu2+, Cr3+, Sr2+ and Zn2+, present in the composition of the water associated with oil production by electrocoagulation. The evaluation of removal of these chemical species was performed by laboratory tests using electrochemical batch reactors and continuous flow. Initial tests were performed with electrocoagulation of synthetic wastewater in batch reactor using iron electrode. Results of removal of Zn2+ and Ni2+ were 78 % and 59 % respectively. While the percentage of removed Ba2+ was 19 % by 30 minutes of treatment and by applying current of 1.10 A. The tests were performed on effluent batch reactor applying the electrochemical technique with stainless steel electrodes 304, the objective was to remove part of the dispersed oil and also of organic compounds in the effluent. Under the experimental conditions used, the maximum result was obtained TOG was 60 % and TOC was approximately 50 % compared to the initial concentration. In the experiments carried out in continuous reactor, with effluent semisynthetic, have been used electrodes of iron and aluminum and the results were 100 % removal of Cd2+, Cu2+, Cr3+ and Zn2+ and 77 % of Sr2+. These percentages were only attainable through the use of the iron electrode. However, when the electrode was replaced by aluminum, there was a reduction in the percentage of removal to 65 %, using the same flow rate and current. Therefore according to the results obtained using the iron electrode was more effective in removing these metals and the conditions of lower current and lower flow rate was satisfactory, as observed in the experimental design adopted
Resumo:
In this paper we present the methodological procedures involved in the digital imaging in mesoscale of a block of travertines rock of quaternary age, originating from the city of Acquasanta, located in the Apennines, Italy. This rocky block, called T-Block, was stored in the courtyard of the Laboratório Experimental Petróleo "Kelsen Valente" (LabPetro), of Universidade Estadual de Campinas (UNICAMP), so that from it were performed Scientific studies, mainly for research groups universities and research centers working in brazilian areas of reservoir characterization and 3D digital imaging. The purpose of this work is the development of a Model Solid Digital, from the use of non-invasive techniques of digital 3D imaging of internal and external surfaces of the T-Block. For the imaging of the external surfaces technology has been used LIDAR (Light Detection and Range) and the imaging surface Interior was done using Ground Penetrating Radar (GPR), moreover, profiles were obtained with a Gamma Ray Gamae-spectômetro laptop. The goal of 3D digital imaging involved the identification and parameterization of surface geological and sedimentary facies that could represent heterogeneities depositional mesoscale, based on study of a block rocky with dimensions of approximately 1.60 m x 1.60 m x 2.70 m. The data acquired by means of terrestrial laser scanner made available georeferenced spatial information of the surface of the block (X, Y, Z), and varying the intensity values of the return laser beam and high resolution RGB data (3 mm x 3 mm), total points acquired 28,505,106. This information was used as an aid in the interpretation of radargrams and are ready to be displayed in rooms virtual reality. With the GPR was obtained 15 profiles of 2.3 m and 2 3D grids, each with 24 sections horizontal of 1.3 and 14 m vertical sections of 2.3 m, both the Antenna 900 MHz to about 2600 MHz antenna. Finally, the use of GPR associated with Laser Scanner enabled the identification and 3D mapping of 3 different radarfácies which were correlated with three sedimentary facies as had been defined at the outset. The 6 profiles showed gamma a low amplitude variation in the values of radioactivity. This is likely due to the fact of the sedimentary layers profiled have the same mineralogical composition, being composed by carbonate sediments, with no clay in siliciclastic pellitic layers or other mineral carrier elements radioactive