Comunicação e imagem organizacional: um estudo de suas relações no comércio varejista de shopping centers

This study shows the results of an exploratory-descriptive research that aimed to identify the latent dimensions of communication, as well as finding relations between such dimensions and organizational image. The sample came to a total of 267 respondents, being 89 managers or owners and 178 salespeople of clothing and footwear stores that are situated in the main five shopping centers located in Natal, capital of Rio Grande do Norte. The collection of the data was made by the use of two structuralized and validated instruments, being the answers measured in the likert scale of 6 points. For the measurement of communication it was used the instrument developed by Downs and Hazen (2002), made up of 8 latent dimensions and 32 indicators. For the image it was used the model of Mael and Ashforth (1992) that contains 5 indicators. The analysis of the data was made through of the use of statistical techniques of factorial analysis and structural equations modeling. The results of the factorial analysis demonstrated communication as being formed by five latent dimensions. The modeling, on the other hand, demonstrated to exist positive relations between communication and organizational image, whose results revealed that the image is influenced by the communication with the supervisor, by the organizational integration and as being stronger explained by the vertical communication

Candidíase vulvovaginal: sintomatologia, fatores de risco e colonização anal concomitante

Post-menarche patients with clinical signs of vulvovaginitis were analyzed in this study, whose aims were the following: identify the frequency of C. albicans and non C. albicans species and negative results, correlate the vaginal culture for yeast with risk factors and symptomatology; compare positive and negative results for yeast in the vaginal and anal cultures; compare the positive results for C. albicans with other results found in the vaginal and anal cultures; and compare concomitant positivity for C. albicans and non C. albicans in the vaginal and anal cultures. Sample selection occurred between May, 2003 and May, 2005, and included 99 patients from Natal, Brazil. The laboratory methods used consisted of CHROMagar Candida culture medium, thermotolerance test at 42-45°C and hypertonic NaCL, in addition to the classic methods of carbohydrate assimilation and fermentation. We used absolute numbers, percentages, means of central tendency, chi-squared test (χ2) with Yates correction, Fisher s exact test and odds ratio for statistical analysis. The most frequent species was C. albicans in 69% of the cases. The positivity for Candida spp showed an association with the use of tight-fitting intimate clothing and/or synthetics, allergic diseases and the occurrence of itching, leukorrhea and erythema. Anal colonization increased the likelihood of vaginal contamination by 2.8 and 4.9 times, respectively, for Candida spp and C. albicans. When compared to the other species, C. albicans-positive anal colonization increased by 3.7 times the likelihood of vaginal positivity. These data suggest likely vaginal contamination originating in the anus

Batidas intensas : corpo e sociabilidade nas festas de música eletrônica em Natal

The significance of the body in electronic music parties as a sign for communicating and socializing among participants is the focus of this work. Qualitative research undertaken in this study seeks to investigate how sociability happens at raves and nightclubs in Natal/RN. Sociability is understood here as a play expression involving the dimensions of music, dance and party; the body, seen from a transdisciplinary approach, is understood as a symbolic instance, with its own meanings, as a result and a producer of social and as a cross between the cultural and the biological. The body has a communicative potential, is primary media. An intersection point between nature and culture, it serves as the seat of emotions and sociability, since it is through it that social relations are made. In electronic music parties, the body is interpreted based on its communication signs: clothing, accessories, body movements, tactile contact, body language, interactions between the public and dj, the dj and the public, gestures, expressive speech of emotions. Through such signs, body communication and a sense of community among participants develop sociability in the festive place and change the mood of the dancers. The Natal s electronic music parties young goer interacts on parties, adopts cheerful and receptive positions towards the other, maintains physical contact, values dance as a form of communication and lists happiness as the main feeling aroused in electronic music festivals. To achieve this result, a plurimetodological approach was used, which consisted of various methodological devices and various techniques of investigation: ethnographic observation, individual and informal interview techniques, photographic record of the scene, in-depth interview and application thirty questionnaires to patrons of electronic music parties

Os processos comunicacionais na festa de São Sebastião Bairro do Alecrim Natal/RN

Parties are one of the most communicative languages, full of contents and symbolic meanings. The devotion to the saints is a kind of communication. In this thesis communicational processes, its languages and its flows are sought at the Saint Sebastian s party, at Alecrim neighborhood, in Natal/RN. The view is focused on the individuals and collective behaviors, in a dynamic which involves the saint s interlocutors at the party space, which supports the pre-novena, the novena and the procession. It tries to show through observation, ethnography and interviews the elements that composes the symbolic language present on the gestures, on the performances and bodies movements, on the clothing colors, as well as on what is said orally or in silence, on the spontaneous prayers or pre-elaborated ones, on the written messages that the devout addresses to the saint at the patron s festivity

Vocabulário técnico e formação dos profissionais da área têxtil: necessidade, elaboração e avaliação de um dicionário de terminologia do vestuário

This research work deals with the compilation of a dictionary on clothing terminology intended to be used as a pedagogic tool as part of the teaching and learning process in the Textile Engineering Course at the Federal University of Rio Grande do Norte. The main terms were selected and assessed by a team of textile teachers and students with the objective to be structured as a conceptual body of information on the following sub-areas of clothing terminology: materials (fabrics and trimmings) and products (garments). This research comprises three main steps: (a) characterization and understanding of the technical vocabulary in the clothing area as well as the identification of a pedagogic demand for a dictionary on clothing terminology, clearly expressed by the textile lecturers and students involved in the assessment of the need and validation of this project development; (b) a proposal for a specific methodology for the compilation of the dictionary which could help the communication process in the lecturing of clothing terminology and (c) based on the terminological principles and the technique of focal groups the dictionary was assessed. The technique of focal groups was used in the first step. In the second step the technique used was that of the terminological methodology adapted to the teaching approach in the Textile Course. In the third step the technique of focal groups was again utilized. It was observed that the main concern of lecturers and students is the lack of a standardized vocabulary, which renders difficult the communication process in both the teaching and learning activities as well as the professional ones in the textile industries. Various aspects, which can overlap, cause this lack of standardization. The main ones pointed out by the study team in the focal groups are: usage of regional words or expressions, usage of foreign words or expressions, analogies, and the low level of formal education, mainly among the industry workers. Another aspect to be considered is the lack of textile literature written in the Portuguese language of Brazil. This evidence shows the importance of a clothing terminology dictionary which will benefit both the education and professional activties in this field of knowledge. This dictionary will also give a substantial contribution to terminological standardization in our research field. With view to fulfill this demand, a dictionary of clothing terminology was compiled with 760 main entries, according to the modern practice in terminology with the necessary modifications concerning our needs. The result of the dictionary assessment was very assertive regarding its structure, contents and possible use in various contexts. The team work emphasized their contribution to the standardization process of the terms that proved to be one of the most important and difficult aspects of this researh work. The significance of this structured terminological dictionary was confirmed by the focal group participants relating to its use for teaching and learning activities, as a reference book, as a source of technical information and also as a tool for pedagogic studies and planning, as well as a significant collaboration to the pedagogic practices in the textile engineering course at University or any other educational institution. Besides, this dictionary can also be used to supply information within the textile field. We are aware that the present work will not exhaust the objectives of this research due to its limitations in opposition to the vast complexity demanded by the compilation of a complete work including all the areas and sub-areas of textile engineering. However, it is an important source for dissemination of concepts on the field of clothing terminology and a tool to effective standardization of the terms used in this subject field

Educação - Corporeidade - Lazer: saber da experiência cultural em prelúdio

In the passage of life, the labyrinth of songs and corners are propitious ways for a better comprehension, perception and incorporation of learnings that emerge from our subjectiveness in a magic caught by senses. Eyesight, taste, hearing, touch and smell in communication with the world, put us in front of cultural diversities. The ludicity accumulated by experiences promote the flow of hilarious and concrete discoveries that express themselves in work and leisure demonstrations. Such reflections emerge indicators to the problematic construction centralized in the incorporation of cultural experience knowledge to the formation process and professional interventions in this rule and area. From this significant problematic, aiming to deepen studies, we favored leisure as field of investigative production in full expansion. This, for sure, was an exercise of qualification that guided us through meander of education and made us dip into studies about the corporeity. A research in which the scenery was painted and constructed with the complicity of the culture lived with shine, colors, rhythm and drummings of one of the most present cultural cycles: carnival. Recognized as a stimulant for beauty, participation, socialization, and helped us to enter in the essence of gestures and expressions of corporeity, to think, elaborate and socialize a critic-scientific knowledge which, appropriating from the rhythm of colors, of sounds, of tonalities, of senses and of meanings impregnated in the web of life. All these things seduced the researcher, making imagination flow amid ludic-creative dialogues with the imaginary of researchers creation and production in the rule and area of leisure, education and corporeity. Option that made us outline as objective to investigate and interpret how leisure teachers-researchers, from their studies, researches and interventions, locate and incorporate the knowledge from cultural experience to the formation process and intervention of professionals in this rule and in this area, emphasizing the contributions from this knowledge to fence and qualify this praxis. So, as living each cultural scenery, each epistemological contribution was feeding the production with images of the different versions of the Brazilian breedings, creating and raising expectations and new discoveries and newcomers. With the seriousness of a scientific study, we lived an xxiii academic experience with complex intensity, rigor and coherence, eliminating, step by step, the risks and limitations always present in a work of this magnitude. However, we weren t, even for one moment, alone. Our epistemic regard always maintained mediated by the principles of a methodological approach - the Etnomethodology, that while central guide provided us clues to unveil the lived world by our people-playful , in a universe of 15 members, that allowed themselves to comprehend, comment, analyze. This way, grasping the object in interactions arised and provoked by narrative interview, it was systematically dialected by (re) interpretation of images and formulations of people-playful, enriched by their beliefs, myths, conceptions and rituals inherent to knowledge from cultural experience, which each one attuned with Brazilian and international history, in a mixture of senses echoed from songs and tales. Inspired in drummings and percussions, clothing and choreographies of gestures and expressions, in mixtures produced in unit interactions in the multiplicity shown as necessary requests to the totality of life, with ludicity the rescue of the past, the conquest of present and the construction of future was the axle guide. This rich process of scientific creation made us realize that is possible qualify and empower the praxis in the rule and area of leisure incorporating the knowledge from cultural experience. What also becomes possible is the recuperation of objective revolutionaries and changing conditions of praxis itself with the view of strengthening and triggerment of vital elements in the rule and area of leisure. We also reaffirm that from this praxis emerge elements necessary to human formation in plenitude, by the appropriation of knowledge that guide the facing of challenges of a complex and plural world that valorize education, corporeity and leisure

Compósito reforçado com sisal para aplicação na moda

The objective of this research is the fabrication of a composite reinforced with dyed sisal fiber and polyester matrix for application in the fields such as, fashion, clothing, interior textiles; fashion accessories are some of the examples. For the fabrication of the composite, the sisal fibers were subjected to processes such as: chemical treatment with sodium hydroxide (NaOH) in the removal of impurities; bleaching for removing the yellowish color of the natural fiber and dyeing with direct dyes to confer the colors blue, green and orange. The search for new technologies ecologically correct has become a major concern in recent decades. Studies show that composite polymer reinforced by natural fibers is suitable for a large number of applications, and its use is advantageous in terms of economic and ecological. The dyed fibers were cut to a length of 30 mm, is used in the confection of webs. For this purpose, a web preparer by immersion, developed in the Laboratory of Chemical Textile of UFRN. The composite sheets measuring 300 x 300 x3 mm were molded by compression, with unsaturated orthophthalic polyester as matrix, and the samples in sizes 150 x 25 x 3 mm were cut with the aid of a laser machine, to be subjected to traction and flexion. The mechanical properties of traction and flexion in three points were performed in the Laboratory of metal and mechanical tests of Materials Engineering of UFRN. The resulting samples from the tests were evaluated in scanning electron microscope (SEM) at CTGas RN. On the basis of the analysis of the results from the mechanical tests, it was observed that the composite had good mechanical behavior, both in traction as in flexion. Furthermore, it was observed that in the water absorption test, the samples had a different percentage among themselves, this occurred due to the variation of density found in the fibre webs. The images of the SEM showed the failures from the manufacturing process and the adhesion of fibre/matrix. When the samples were prepared with the dyed fibers to be applied in fashion, the results were positive, and it can be concluded that the main objective of this work was achieved

Constribuição técnica de um sistema de emulsão inversa a base de óleos vegetais para fluidos de perfuração

The developments in formulating drilling fluids to apply in petroleum fields are based on new technologies and environmental challenges, where the technical performance of a developed drilling fluid is used to produce a minimum environmental impact, showing great economy in costs. It is well known that the potential use of oil-based drilling fluids is limited because these fluids when discharged in the sea do not disperse as much as water-based ones and may form waterproof films in the seabed, having a profound effect on plants and animals living in this environment. The current works have been made in investigating fluids called pseudofluids, which are synthetic ester-based, n-paraffin-based and other fluids formed from inverse emulsion. In this research the principal parameters involved in inverse emulsion process were studied, in laboratory scale, using esters as main component. Others commercial drilling fluids were used as comparative samples, as well as samples from laboratory and field where these drilling fluids are being applied. Concentrations of emulsifier and organophilic clay, which are viscosity donor, were varied to verify the influence of these parameters, in different oil/water ratios (55/45, 60/40, 65/35, 70/30, and 75/25). The salt concentration (NaCl) is an indicative parameter of stability and activity of an esterbased fluid. In this research the salt concentration was varied in 10,000, 20,000, and 50,000 ppm of NaCl. Some rheological properties of the produced fluids were studied, such as: initial gel, plastic viscosity, yield point, and apparent viscosity. Through the obtained rheological measures, the existence of two systems could be verified: fluid and flocculated. It could be noticed that the systems were influenced, directly, by the oil/water ratio and emulsifier, organophilic clay and NaCl concentrations. This study showed the viability to use an ester obtained from a regional vegetable product babaçu coconut oil to obtain an efficient and environmental safe drilling fluid

Obtenção de emulsões asfálticas modificadas utilizando resíduos industriais

The main objective of this research was the development and characterization of conventional and modified cationic asphalt emulsions. The asphalt emulsions were developed by using the Petroleum Asphalt Cement (CAP 50-70) from Fazenda Belém (Petrobras -Aracati-Ce). The first step in this research was the development of the oil phase (asphalt + solvent) and the aqueous phase (water + emulsifying agent + acid + additives), separately. During the experiments for the obtaining of the conventional asphalt emulsion, the concentration of each constituent was evaluated. For the obtaining of the oil phase, kerosene was used as solvent at 15 and 20 wt.%. For the development of the aqueous phase, the emulsifying agent was used at 0.3 and 3.0 wt.%, whereas the acid and the additive were set at 0.3 wt.%. The percentage of asphalt in the asphalt emulsion was varied in 50, 55, and 60 wt.% and the heating temperature was set at 120 °C. The aqueous phase in the asphalt emulsion was varied from 16.4 to 34.1 wt.% and the heating temperature was set at 60 °C. After the obtaining of the oil and the aqueous phases, they were added at a colloidal mill, remaining under constant stirring and heating during 15 minutes. Each asphalt emulsion was evaluated considering: sieve analysis, Saybolt Furol viscosity, pH determination, settlement and storage stability, residue by evaporation, and penetration of residue. After the characterization of conventional emulsions, it was chosen the one that presented all properties in accordance with Brazilian specifications (DNER-EM 369/97). This emulsion was used for the development of all modified asphalt emulsions. Three polymeric industrial residues were used as modifier agents: one from a clothing button industry (cutouts of clothing buttons) and two from a footwear industry (cutouts of sandals and tennis shoes soles), all industries located at Rio Grande do Norte State (Brazil).The polymeric residues were added into the asphalt emulsion (1 to 6 wt.%) and the same characterization rehearsals were accomplished. After characterization, it were developed the cold-mix asphalts. It was used the Marshall mix design. For cold-mix asphalt using the conventional emulsion, it was used 5, 6 and 7 wt.% asphalt emulsion. The conventional mixtures presented stability values according Brazilian specification (DNER-369/97). For mixtures containing asphalt modified emulsions, it was observed that the best results were obtained with emulsions modified by button residue

Produção de forragem verde em sistema hidropônico usando esgoto tratado

In the urban areas of the cities a larger problem of destiny of effluents of the treatment stations is verified due to the junction of the sewages in great volumes. This way the hidroponic cultive becomes important, for your intensive characteristic, as alternative of reuse. This work presents as objective the improvement of the relation hidric-nutritious of the hidroponic cultive of green forage (FVH) using treaty sewage. The production of forage was with corn (Zea mays L.), using double hybrid AG1051, in the experimental field of the Federal University of Rio Grande do Norte (UFRN), in the city of Natal-RN-Brazil. The treated effluent essentially domestic had origin of anaerobic reactor, type decant-digester of two cameras in series followed by anaerobic filters drowned. The hidroponic experimental system was composed of 08 stonemasons, with limited contours for masonry of drained ceramic brick, measuring each one 2,5 meters in length for 1,0 meter of width, with inclination of 4% (m/m) in the longitudinal sense, leveled carefully, in way to not to allow preferential roads in the flow. These dimensions, the useful area of Isow was of 2 square meters. The stonemasons of cultive were waterproof (found and lateral) with plastic canvas of 200 micres of thickness, in the white color. Controlled the entrance and exit of the effluente in the stonemasons, with cycles of 12,68 minutes, it being water of 1,18 minutes. The treatments were constituted of: T1 - 24 hours/day under it waters with flow of 2 L/min; T2 - 12 hours/day under waters with flow of 4 L/min; T3 - 12 hours/day under waters with flow of 2 L/min; and T4 - 16 hours/day under waters with flow of 3 L/min. There were evaluations of the evapotranspirometric demand, of hidroponic system affluent and effluent seeking to characterize and to monitor physical-chemical parameters as: pH, temperature, Electric Conductivity and Fecal Coliforms. This last one was analyzed to the 11 days after isow (DAS) and to the 14 DAS. The others were analyzed daily. I sow it was accomplished in the dates of February 21, 2007, first experiment, and April 10, 2007, second experiment. The density of Isow was of 2 kg of seeds, germinated before 48 hours, for square meter of stonemason. The statistic delineament was it casual entirely with two repetitions, in two experiments. It was applied Tukey test of average to five percent of probability. The cultivation cycle was of 14 DAS with evapotranspirometric demand maximum, reached by T1, of 67,44 mm/day. The analyzed parameters, as mass of green matter - Kg, productivity-Kg/m2 and reason of production of seed FVH/Kg used in Isow, the best result was presented by T1, obtaining value of up to 19,01 Kg/m2 of cultive. Without significant difference, the T4 presented greats values with 16 hours under cycle of water. The Treatments 2 and 3 with 12 hours under cycle of water, they obtained inferior results to the other Treatments. As treatment system, came efficient in the reduction of the salinity. T1 obtained reduction medium maxim of 62,5%, to the 7 DAS, in the amount of salts that enter in the system in they are absorbed in the cultivation. The cultivation FVH acted reducing the microbiologic load. Significant percentile of reduction they were reached, with up to 90,23% of reduction of Units of Colonies (UFC), constituting, like this, the Hidroponic System as good alternative of treatment of effluents of Reactors of high Efficiency

As Faces e os Disfaces da Informalidade no Capitalismo Conteporâneo: Um Estudo do Comércio de Rua em Pau dos Ferros/RN

This paper discusses the expression of informality in contemporary capitalism. Thematic of relevance to the analysis of the reality of work today and the logic that moves the capital, its real presence in the lives of individuals. The street trading of Pau dos Ferros town, popularly known as "street market" was chosen as the search space. The main objective is to seize and examine the articulations and logic, present in the configuration of the street trading of this city, located in the state of Rio Grande do Norte, explaining the functionality of informality for capitalist accumulation, but also for the reproduction of segments of the working class. Our analysis is based in the perspective of totality, trying to grasp the historical determinations of the phenomenon in focus. It includes the analysis of the mechanisms used by the capital to reproduce itself in the current historical context, which has been implicated in the composition of the labor markets of different countries and in various forms of exploitation to which workers in general are subject. It also means discussing the development of capitalism in Brazil, the logic that permeates its dependence, and especially the use of over-exploitation of labor, as a lever for internal accumulation. The course of investigation consisted of theoretical research to form the basis of theoretical and methodological analysis and to outline the context in which our research object is inserted, and field research conducted in two phases: systematic observation, which allowed to map traders features and the infrastructure of commerce, and the conduction of interviews with key informants. The material collected was scrutinized according to analytical scheme inspired by the content analysis. Among the main considerations developed from the research process we include: the street trading of Pau dos Ferros remains shrouded in the majority sale of agricultural products, this demonstrates the structural characteristics of the region. However, the supply of this product is no longer restricted to the excess of small local producers. The presence of the dealer changed the distribution of the product, streamlining it. In parallel, business practices are developed, practices in which traded goods (industrial) reflect the moment of capitalist restoration, a larger business network. The reflections also made it possible to show that street trading follows developing on the basis of informal work, which gains functionality to the system, as it is configured as a space commonly used to drain part of the production, of industries (clothing/shoes), especially if the distribution is considered as an essential element of the complex process that aims at capital appreciation. This activity has been functioning as a place of employment and income generation for the subjects who are away from formal employment, masking, this way, unemployment, moreover, they allow them to continue as consumers. Such expressions reflect the ability and the logic of capital to expand and aggregate into so many realities. It is underway today, the logic that has led many workers to join the project of domination of capital, by the illusory chance to become capitalists. The aim has been to turn the subject into a consumer and the worker an enterprising

Fluidos de perfuração aquosos: a contribuição da goma xantana e carboximetilcelulose no controle de filtrado

This study aimed mainly to evaluate the influence of xanthan gum (XG) and carboxymethylcellulose (CMC) in the filtration process of water-based drilling fluids, considering the conformational changes suffered by the polyelectrolyte with the addition of sodium chloride (NaCl) in different concentrations (0.17, 0.34 and 0.51 mol.L-1). It was also evaluated the behavior of the fluid by the addition of calcium carbonate (CaCO3) in pure water and in brine. Seeking a better understanding of the interaction between the polymers used and CaCO3, polymer adsorption analyzes were performed using a depletion method, which yielded a higher percentage of adsorption of Xanthan Gum in this material (29%), which can justify the formation of a thin and waterproof filter cake for drilling fluids containing this polymer. However, the best values of apparent viscosity (20 and 24 mPa.s) and volume of filtrate (8.0 and 8.1 mL) were obtained for the systems consisting of xanthan gum, CMC and CaCO3, in NaCl aqueous solutions concentrations of 0.34 and 0.51 mol.L-1, respectively. The values can be related to the presence of CMC that increases the apparent viscosity and reduces the volume of filtrate. In addition, the CaCO3 added acts as a bridging agent, promoting the formation of a less permeable filter cake

Vestimentas em performance: composições em modos do corpo

This research deals with the possible relationships between the body and the garment in performative scenic states across the contemporary scene, the philosophy of fashion and the philosophical arguments of profanity and dispositive. Some works were observed and cited in this dissertation, for this I conducted structured interviews with eight artists of performance, as a methodological strategy that could bring data about the experiences of this dresses and/or naked bodies on the scene, in addition to literature and revealing the action of clothing on the body as well as its influence on the subjectivities of that whom performes and the public. These relationships can be experienced in the process of creating costumes in contemporary scene naming the possibility of modes of the body, as ways that emerge and constitute as creative, discursive and aesthetic alternatives.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.