Estudo imuno-histoquímico da expressão da glut-1 e mensuração do índice angiogênico (CD34) em adenomas pleomórficos, carcinomas adenóides císticos e carcinomas mucoepidermóides de glândulas salivares

The expression of glucose transporter protein 1 (GLUT-1), as well the angiogenesis has been associated to clinical behavior and aggressiveness in tumors of various origin. It is believed that the expression of this protein denotes metabolic demand of the tumor cells and, thus its influence upon the formation of new blood vessels. Pleomorphic adenoma (PA) and the adenoid cystic carcinoma (ACC) and mucoepidermoid carcinoma (MEC) represent, respectively, the most commom benign and malignant tumors of salivary glands. The aim of this study was to analyze and compare the immunohistochemical expression of GLUT-1 and its correlation with angiogenesis in cases of PAs, ACCs and MECs considering their histological grades. The sample consisted of 20 PAs, 20 ACCs and 10 MECs. The cases were analyzed and classified according to their histological grades. The expression of GLUT-1 was evaluated in the parenchyma lesions, establishing the percentage of immunopositive cells, according to the following scores: 0 (no cell immunomarked), 1 (up to 25% of tumor cells immunostained), 2 (25 - 50% of tumor cells immunostained) and 3 (more than 50% of tumor cells immunostained). The angiogenic index was analyzed by counting the microvessels immunostained by anti-CD34 antibody, in 5 fields (200X). The analysis of the expression of GLUT-1 in tumor parenchyma showed statistically significant differences between benign and malignant groups (p = 0.022). The average number of microvessels in PAs was 40.4, 21.2 in ACCs and 66.5 in MECs, with significant differences between groups (p <0.001). When compared to the expression of GLUT-1 and angiogenic index as a whole, there was no significant correlation between the number of microvessels and the expression of GLUT-1 (r = 0.211, p = 0.141). In conclusion, the results of this study suggest not only that differences in biological behavior between PAs, ACCs and MECs may be associated to the expression of GLUT-1, but also that benign and malignant salivary gland present differences in the average number of microvessels, with higher levels considered more aggressive tumors. Furthermore, the number of newly formed microvessels can be independent of the metabolic demand of the tumor cells

Avaliação de efeitos DW extratos de sambucus australis E sambucus nigra na marcação de constituintes sanguineos com tecnécio-99M, na morfologia de Hemácias de ratos wistar, na topologia plasmidial e na ação do cloreto estanoso no DNA Plasmidial

Radiobiocomplexes are used in nuclear medicine to obtain images and to treat diseases. Blood constituents have been used as radiobiocomplexes. Natural or synthetic products can influence on the labeling of blood constituents with technetium-99m (99mTc), the morphology of red blood cells and on the stannous chloride (SnCl2) action on plasmid DNA. Sambucus australis and Sambucus nigra are used in popular culture for treating diseases. The aim of this work was to evaluate the effects of the extracts of Sambucus australis and Sambucus nigra on the labeling of blood constituents with 99mTc, on morphology of red blood cells of Wistar rats, on the topology of plasmids DNA and the action against the SnCl2 effects on the DNA of plasmids pBSK. On the labeling of blood constituents with 99mTc it was verified that both extracts were capable to decrease significantly the radioactivity in the cellular compartment and in the insoluble fraction of plasma. Sambucus australis also decreased the labeling of insoluble fraction of blood cells with 99mTc. Both extracts did not alter the morphology of red blood cells. Moreover, it was verified that Sambucus nigra did not alter the electrophoretic profile of plasmid DNA, but decreased the effect of SnCl2 on plasmid DNA. These last results sugest a genotoxic effect and a protective action of Sambucus nigra extract against the SnCl2 action on plasmid DNA. This work was developed with the contribution of several Departments of biomedical area of the Hospital Universitário Pedro Ernesto, of the UERJ, characterizing a multidisciplinary experimental research

kit educacional para controle e supervisão aplicado a nível

PEREIRA, J. P. ; CASTRO, B. P. S. ; VALENTIM, R. A. M. . Kit Educacional para Controle e Supervisão Aplicado a Nível. Holos, Natal, v. 2, p. 68-72, 2009

Repercussões histopatológicas da colostomia no coto colônico distal desfuncionalizado: estudo experimental em ratos

O objetivo deste trabalho foi evidenciar as repercussões histopatológicas da colostomia no segmento desfuncionalizado e, dessa forma, criar um modelo experimental da colite de derivação fecal (CO). Foram utilizados 65 ratos, adultos, da raça Wistar, com peso variando de 220 a 300 g. Os animais foram divididos em 13 grupos, contendo cinco ratos. Do grupo 1 ao grupo 12, os animais foram submetidos a laparotomia mediana, sendo realizada uma colostomia terminal tipo boca única, e observados, por períodos variados de tempo, com o máximo de cem dias. Os animais, após serem mortos, foram necropsiados e retirado o segmento co1ônico desfuncionalizado para a avaliação histopatológica. Essa avaliação consistia de uma análise quantitativa, através da medida da espessura da mucosa colônica, e de uma análise qualitativa, mediante avaliação subjetiva: da presença de infiltrado inflamatório agudo ou crônico na lâmina própria; das alterações na arquitetura das criptas colônicas; da presença de hiperplasia folicular linfóide e de linfócitos na luz dos vasos da submucosa; e da presença de eosinófilos na luz intestinal. No grupo 12, após o 100° dia de pós-operatório (OPO), foi realizada a reconstrução do trânsito intestinal, e, após trinta dias, o cólon descendente foi retirado para a análise histopatológica. O método de Tukey e o teste "t" de Student foram utilizados como parte da análise dos resultados. Verificou-se uma redução estatisticamente significante da espessura da mucosa colônica a partir do 4000PO. Concluiu-se que a colostomia desfuncionalizante realizada em ratos reproduziu alterações histopatológicas compatíveis com a colite de derivação, e que estas mostraram-se reversíveis após a reconstrução do trânsito intestinal

Comportamento da adição do carbeto de nióbio (nBC) na matriz metálica do aço ferrítico 15kH2mfa

The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure

Avaliação de parâmetros de estresse oxidativo em plantas de cana-de-açúcar tratadas com peróxico de hidrogênio

The genus Saccharum belongs to Poaceae family. Sugarcane has become important monocultures in Brazil due to their products: ethanol and sugar. The production may change between different regions from Brazil. This difference is related to soil, climatic conditions and temperature that promotes oxidative stress that may induce an early flowering. The aim of this work was to identify the effects of oxidative stress. In order to analyse this, sugarcane plants were submitted to oxidative stress using hydrogen peroxide. After this treatment, the oxidative stress were analyzed Then, the plant responses were analyzed under different approaches, using morphophysiological, biochemical and molecular tools. Thus, sugarcane plants were grown under controlled conditions and until two months they were subjected first to a hydroponics condition for 24 hours in order to acclimation. After this period, these plants were submitted to oxidative stresse using 0 mM, 10 mM, 20 mM and 30 mM hydrogen peroxide during 8 hours. The histomorphometric analysis allowed us to verify that both root and leaf tissues had a structural changes as it was observed by the increased in cell volume, lignin accumulation in cell walls. Besides, this observation suggested that there was a change in redox balance. Also, it was analyzed the activity of the SOD, CAT and APX enzymes. It was observed an increase in the SOD activity in roots and it was also observed a lipid peroxidation in leaves and roots. Then, in order to identify proteins that were differently expressed in this conditions it was used the proteomic tool either by bidimensional gel or by direct sequencing using the Q-TOF EZI. The results obtained with this approach identified more than 3.000 proteins with the score ranging from 100-5000 ions. Some of the proteins identified were: light Harvesting; oxygenevolving; Thioredoxin; Ftsh-like protein Pftf precusor; Luminal-binding protein; 2 cys peroxiredoxin e Lipoxygenase. All these proteins are involved in oxidative stress response, photsynthetic pathways, and some were classified hypothetical proteins and/or unknown (30% of total). Thus, our data allows us to propose that this treatment induced an oxidative stress and the plant in response changed its physiological process, it made changes in tissue, changed the redox response in order to survival to this new condition

Efeitos biológicos in vitro de agentes físicos utilizados em fisioterapia

The uses of radiobiocomplexes labeled with technetium-99m contributed to health science advances. Stannous chloride (SnCl2) has been used as a reducing agent for the labeling process. Cytotoxic and genotoxic effect of the SnCl2 have been described in several studies and with this experimental models alterations in molecular and cellular level can be evaluated. In the last years the physicals therapists acquired new devices which emits electromagnetic radiation such us Extremely Low Frequency Pulsated Electromagnetic Fields (E.L.F. P.E.M.F.), radiofrequency, Intense Pulsed Light (I.P.L.) and others which emits sonic waves such us Biorresonance. Scientific evidence of the effects and dosage is important to protect public health and to reach exposition levels that result in significant biological effects. The aim of this project is to verify the effects of these physical agents in plasmid DNA and E. coli AB1157 cultures in presence or absence of SnCl2 and the effects in blood constituents labeled with technetium-99m. Wistar rats blood was exposed to the cited sources and the labelling of blood constituents with 99mTc was carried through. Cultures of E. coli AB1157 and plasmidial samples DNA had been also exposed the physical agents. The results suggest that these agents are capable of altering neither the survival of E. coli cells or plasmid DNA electrophoresis mobility. The multidiscipline character was clearly in this study due the interaction between Nuclear Medicine department of the UERJ and the Laboratory of Physical Agents of the Maimonides University in Argentina until the union between the teacher (biomedical and physiotherapist) and student (physiotherapist), besides collaborators of the area of Physics and Biology, promoting new ideas and perspectives and also adding the knowledge of different areas and origins

Análise fractal da vasculatura arteriolar e venular da retina em pessoas sem doença ocular

Although it has been suggested that retinal vasculature is a diffusion-limited aggregation (DLA) fractal, no study has been dedicated to standardizing its fractal analysis . The aims of this project was to standardize a method to estimate the fractal dimensions of retinal vasculature and to characterize their normal values; to determine if this estimation is dependent on skeletization and on segmentation and calculation methods; to assess the suitability of the DLA model and to determine the usefulness of log-log graphs in characterizing vasculature fractality . To achieve these aims, the information, mass-radius and box counting dimensions of 20 eyes vasculatures were compared when the vessels were manually or computationally segmented; the fractal dimensions of the vasculatures of 60 eyes of healthy volunteers were compared with those of 40 DLA models and the log-log graphs obtained were compared with those of known fractals and those of non-fractals. The main results were: the fractal dimensions of vascular trees were dependent on segmentation methods and dimension calculation methods, but there was no difference between manual segmentation and scale-space, multithreshold and wavelet computational methods; the means of the information and box dimensions for arteriolar trees were 1.29. against 1.34 and 1.35 for the venular trees; the dimension for the DLA models were higher than that for vessels; the log-log graphs were straight, but with varying local slopes, both for vascular trees and for fractals and non-fractals. This results leads to the following conclusions: the estimation of the fractal dimensions for retinal vasculature is dependent on its skeletization and on the segmentation and calculation methods; log-log graphs are not suitable as a fractality test; the means of the information and box counting dimensions for the normal eyes were 1.47 and 1.43, respectively, and the DLA model with optic disc seeding is not sufficient for retinal vascularization modeling

Mobilização de reservas e partição de metabólitos durante a germinação da semente e o estabelecimento da plântula em moringa

Seed germination and seedling establishment are critical processes for commercial plantation and depend directly on reserve mobilization as a source of cellular fuels and biosynthetic precursors. In this way, we investigated the coordination among reserve mobilization, metabolite partitioning, and mobilizing enzyme activities in Moringa oleifera Lam (moringa) an oil-seeded species employed in biofuel production. Seeds were germinated under controlled conditions and seedlings were grown hydroponically at a greenhouse. Samples were harvested at 0, 4, 8, 10, 12, 16, and 20 days after imbibition (DAI). The contents of dry mass (DM), neutral lipids (NL), soluble proteins (SP), starch, total soluble sugars (TSS), non-reducing sugars (NRS), and total free amino acids (TFAA) as the activity of isocitrate lyase (ICL), acid proteases, and amylases were determined. The mobilization of storage proteins was initiated during seed germination whereas the mobilization of storage lipids and starch was triggered throughout seedling establishment although all reserves have been depleted until 20 DAI. The partitioning of DM and metabolites to the roots and the shoots was uneven during seedling establishment. Low shoot/root ratio on the basis of DM could be related to the natural occurrence of moringa in drought climates. In the roots, TSS, NRS, and TFAA were accumulated from 12 to 16 DAI and then were consumed until the end of the experiment. In the shoots, TSS and TFAA were consumed in parallel with NRS accumulation from 12 to 20 DAI. The activity of ICL, acid proteases, and amylases was coordinated with the mobilization of lipids, proteins and starch respectively. Thus, we propose that the patterns of reserve mobilization and metabolite partitioning verified in moringa seem distinct from those found to other tree species and may be involved in metabolic strategies to enable environment colonization

Úlcera de pressão em pacientes internados em um hospital universitário em Natal/RN: condições predisponentes e fatores de risco

The pressure ulcers (PU), also known as decubitus ulcers, are defined as injuries caused by the constant pressure exerted on a particular point of the body, causing impairment of blood supply with a decrease or interruption of tissue irrigation, causing occlusion of blood vessels and capillaries, ischemia and cell death. This is a descriptive study with longitudinal design, and panel type, with quantitative approach that aimed to examine the association between predisposing conditions (PC), intrinsic factors (IF) and extrinsic factors (EF) with the occurrence of PU, in hospitalized patients in the Intensive Care Unit (ICU), pain clinical, surgical clinical and neurology wards of a university hospital. The study population was composed of all patients who were restricted to bed during the period from December 2007 to February 2008. The study was approved by the Ethics Committee of HUOL / UFRN (No 135/07). The data-collection took place through a structured formulary of observation, data from medical records and physical examination of patients skins. The results were organized in SPSS 15.0 software, tabulated, categorized and analyzed by descriptive and inferential statistics. Of the 30 patients studied, 43.3% had been hospitalized in the pain clinical and surgical clinic wards, 20.0% in the ICU, 20.0% in the ICU / ward and 16.7% in neurology, being the length of hospitalization in those units of 7 to 18 days (63.3%) and from 19 to 30 days (36.7%), predominantly female and aged ≥ 60 years (60.0%). 19 PU were diagnosed in 43.3% of patients monitored, being 38.5% with one PU between 7 to 18 days and 46.2% with two or more between 19 to 30 days of hospitalization, showing significant relationship (ρ-value = 0029) between length of hospital stay and the number of PU. Was found an association of 35.7% of the PC (cardio-respiratory, hematological, metabolic and psychogenic), IF (age group, oedema, skin changes in humidity and change of body temperature) and EF (type of mattress and strength of body pressure) for all patients studied, statistically significant (ρ-value = 0001), between the average scores in patients with and without PU, with reason chance to 12.0 for the development of PU and there was moderate correlation ( r = 0618) in the presence of this association. Results show the influence of the multiplicity of factors and conditions on the occurrence of PU, which brings us to reflect on the assistance focused on prevention and reduction of these injuries which will encourage the reduction of hospitalization length, physical and psychological suffering, and the possibility of improving the clinical condition of the patient.

Análise de estruturas de superfície delgadas axissimétricas via método dos elementos finitos com utilização de elemento retilíneo

The present work deals with the linear analysis of bi-dimensional axisymmetric structures, through development and implementation of a Finite Element Method code. The structures are initially studied alone and afterwards compatibilized into coupled structures, that is, assemblages, including tanks and pressure vessels. Examples are analysed and, in order to prove accuracy, the results were compared with those furnished by the analytical solutions

Um sistema para estimação da vazão de gás de poços produzindo por Plunger Lift para vaso separador de teste em plataformas de petróleo

This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV

Projeto de um sistema emulador de escoamentos e vaso de separação primária

The purpose of this study was to develop a pilot plant which the main goal is to emulate a flow peak pressure in a separation vessel. Effect similar that is caused by the production in a slug flow in production wells equipped with the artificial lift method plunger lift. The motivation for its development was the need to test in a plant on a smaller scale, a new technique developed to estimate the gas flow in production wells equipped with plunger lift. To develop it, studies about multiphase flow effects, operation methods of artificial lift in plunger lift wells, industrial instrumentation elements, control valves, vessel sizing separators and measurement systems were done. The methodology used was the definition of process flowcharts, its parameters and how the effects needed would be generated for the success of the experiments. Therefore, control valves, the design and construction of vessels and the acquisition of other equipment used were defined. One of the vessels works as a tank of compressed air that is connected to the separation vessel and generates pulses of gas controlled by a on/off valve. With the emulator system ready, several control experiments were made, being the control of peak flow pressure generation and the flow meter the main experiments, this way, it was confirmed the efficiency of the plant usage in the problem that motivated it. It was concluded that the system is capable of generate effects of flow with peak pressure in a primary separation vessel. Studies such as the estimation of gas flow at the exit of the vessel and several academic studies can be done and tested on a smaller scale and then applied in real plants, avoiding waste of time and money.

Remoção de óleo da água de produção por flotação em coluna utilizando tensoativos de origem vegetal

In the petroleum industry, water is always present in the reservoir formation together with petroleum and natural gas and this fact provokes the production of water with petroleum, resulting in a great environmental impact. Several methods can be applied for treatment of oily waters, such as: gravitational vases, granulated media filtration systems, flotation process, centrifugation process and the use of hydrocyclones, which can also be used in a combined way. However, the flotation process has showed a great efficiency as compared with other methods, because these methods do not remove great part of the emulsified oil. In this work was investigated the use of surfactants derived from vegetable oils, OSS and OGS, as collectors, using the flotation process in a glass column with a porous plate filter in its base for the input of the gaseous steam. For this purpose, oil/water emulsions were prepared using mechanical stirring, with concentrations around 300 ppm. The air flow rate was set at 700 cm3/min and the porous plate filter used for the generation of the air bubbles has pore size varying from 16 to 40 Pm. The column operated at constant volume (1500mL). A new methodology has been developed to collect the samples, where, instead of collecting the water phase, it was collected the oil phase removed by the process in the top of the flotation column. It has been observed that it is necessary to find an optimum surfactant concentration to achieve enhanced removal efficiency. Being for OSS 1.275 mmol/L and for OGS 0.840 mmol/L, with removal efficiencies of 93% and 99%, respectively, using synthetic solutions. For the produced water, the removal in these concentrations was 75% for OSS and 65% for OGS. It is possible to remove oil from water in a flotation process using surfactants of high HLB, fact that is against the own definition of HLB (Hydrophile-Lipophile Balance). The interfacial tension is an important factor in the oil removal process using a flotation process, because it has direct interference in the coalescence of the oil drops. The spreading of the oil of the air bubble should be considered in the process, and for the optimum surfactant concentrations it reached a maximum value. The removal kinetics for the flotation process using surfactants in the optimum concentration has been adjusted according to a first order model, for synthetic water as for the produced water.

Estudo da angiogênese pelo CD105 e FvW no carcinoma epidermóide oral e sua relação com o estadiamento clínico do tumor

The purpose of this study was to assess the immunohistochemical expression of CD105 and FvW antibodies in the angiogenesis of oral epidermoid carcinoma (OEC), correlating it with the TNM clinical staging system, seeking a better understanding of its biological behavior and use as an indicator of prognosis.The sample consisted of 30 epidermoid carcinoma (EC) cases, 10 of the floor of the mouth, 10 of the retromolar region and 10 of the tongue, in addition to 10 cases of pyogenic granuloma, which made up the control group. The results showed that mean microvessel counts (MVC) were correspondingly higher in the pyogenic granuloma group (CD105 = 57.26 vessels and FvW = 39.64) than in the EC group (CD105 = 10.09 and FvW = 12.20) and that the differences were statistically significant between the groups for each of the angiogenic biomarkers (p = 0.002 for CD105 and p< 0.001 for FvW). CD105 had better positivity in the pyogenic granuloma group (mean = 57.26 vessels) and for EC, FvW had the highest expression (mean = 12.20 vessels). With respect to EC, the most affected age group was between 51 and 70 years (n = 14; 46.7%), with a representative MVC for both markers. No statistically significant difference was found between the sexes for any of the markers (p = 0.967 for CD105 and p = 0.744 for FvW). Mean CD105 levels were much higher in patients with stage T3 and T4 (17.13) and lower in those with stage N+ (6.36). Mean FvW levels were higher in the patients with stage T1 and T2 (12.23) and lower in patients with T3 and T4 (12.10), but without a statistically significant difference. In regard to anatomic location, a statistically significant difference was observed between FvW sites, with a statistically significant difference between floor of the mouth cases and those located in the retromolar region (p =0.013). Therefore, this study suggests that CD105 expression in OEC angiogenesis, in contrast to other types of malignant neoplasias, may not be correlated with prognosis and tumor aggressiveness, whereas FvW was a more effective antibody for staining this lesion