31 resultados para Vasos linfáticos
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Squamous cell carcinoma of the lower lip is among the most common malignant tumors of the oral and maxillofacial region, with good prognosis in more than 90% of patients with 5-year survival. In these carcinomas, the development of lymph node metastasis decreases the prognosis and it has been associated with the formation of new lymphatic vessels. It has been suggested the important role of vascular endothelial growth factor-C (VEGF-C), the receptor type 3 VEGF (VEGFR-3) and hypoxia-induced factor 1 (HIF-1) in this process. The aim of this study was to evaluate the immunoexpression of VEGF-C, VEGFR-3 and HIF-1α and correlate with intra and peritumoral lymphatic density in squamous cell carcinomas of the lower lip metastatic and non-metastatic. The sample consisted of 50 cases of squamous cell carcinoma of lower lip, of which 25 had regional lymph node metastasis and 25, absence of metastasis. The percentages of cells immunostained for VEGF-C, VEGFR-3 and HIF-1α in front of tumor invasion and in the center of tumor were evaluated. Microvessel density lymphatic (MDL) was determined by the counting of lymph microvessels immunostained by the anti-D2-40 in five fields (200×), in an area of evaluation with 0.7386 mm2. The invasion of the lymph vessels by malignant cells was also evaluated. Immunostaining was correlated with the presence and absence of metastasis, TNM clinical stage, local recurrence, disease outcome (remission of injury or patient death) and histological grading. The analysis of intra and peritumoral lymphatic density showed no significant association with clinicopathological parameters and immunoexpressions of VEGF-C, VEGFR-3 and HIF-1α (p > 0,05). There was a weak positive correlation, significant, between intra and peritumoral lymphatic density (r = 0,405; p = 0,004). VEGF-C showed no significant association with clinicopathological and prognosis parameters (p > 0,05). For VEGFR-3, there was scarce membrane staining and intense and homogenous cytoplasmic staining in neoplastic cells. Percentage of positive cytoplasmic VEGFR-3 in center of tumor, exhibited a statistically significant association with metastasis (p = 0,009), patient death (p = 0,008) and histological grades of malignancy proposed by Bryne et al. (1992) (p = 0,002) and World Health Organization (p = 0,003). A low positive correlation was statistically significant between the immunoreactivity of VEGFC and VEGFR-3 cytoplasmic (r = 0,358; p = 0,011) and between the percentage of positive cytoplasmic VEGFR-3 in front of tumor invasion and in the center of the tumor (r = 0,387; p = 0,005) was also demonstrated. There was no association between HIF-1α, clinicopathological and prognosis parameters, and VEGF-C and VEGFR-3. The percentage of nuclear positivity for HIF-1α was significantly higher in cases without invasion of peritumoral lymphatic (p = 0,040). Based on the results we can conclude that most cytoplasmic expression of VEGFR-3 in center of tumor in metastatic cases, high degree of malignancy and poorly differentiated, contributes to poor outcome of squamous cell carcinoma of the lower lip, including patient death. Intra and peritumoral lymphatic density seems to be not associated with lymph node metastasis in these carcinomas
Resumo:
Oral tongue squamous cell carcinoma (OTSCC) has an aggressive biological behavior, with a high propensity for the development of lymph node metastases. In this context, lymphangiogenesis is considered an important phenomenon for the spread of tumor cells and may be influenced by microenvironmental stimuli. Mast cells have been implicated in tumor progression, although their influence in the formation of lymphatic vessels is not well established. The aim of this study was to analyze, in a case series of OTSCC (n=50), possible correlations between lymphatic vessel density (LVD), mast cell count and clinicopathological features, including tumor-node-metastasis (TNM) stage, histological grade of malignancy (Bryne, 1998), and nodal metastasis. LVD was established as the mean number of lymphatic vessels immunostained by anti-podoplanin (D2-40) antibody, identified in five microscopic fields (200x). For the analysis of mast cells, tryptase-immunoreactive cells were quantified in five fields (400x). Both immunostainings were analyzed in the tumor center and invasion front. Intratumoral lymphatic density (ILD) was higher in cases in advanced clinical stages (III-IV), compared to those in initial stages (I-II), as well as in metastatic cases in respect of non-metastatic (p<0,05). There were no statistically significant differences between low-grade and high-grade malignancy cases with respect to ILD (p>0,05). Peritumoral lymphatic density (PLD) and mast cell counts showed no significant relations with any of the clinicopathological parameters evaluated (p>0,05). Also there were no significant correlations between LVD and mast cell counts, whether in intratumoral (r = -0,004; p=0,977) or peritumoral region (r = -0,154; p=0,285). The results of the present study suggest that intratumoral lymphatic vessels may contribute in part to the progression of OTSCC, although PLD may be insufficient to justify differences in biological behavior. This supports the hypothesis of involvement of other mechanisms in metastatic spread of malignant cells, which could complement the effects of lymphangiogenesis. Although mast cells perform several pro- and antitumoral functions, they do not appear to directly influence aggressiveness of OTSCC. In addition, the quantity of these cells may not be essential for lymphatic vessel formation.
Resumo:
Angiogenesis and lymphangiogenesis are changes that occur due to gingival inflammation caused by microorganisms present in the biofilm, as well as the migration of immune cells and secretion of mediators in the aggressed site. This study aimed to research angiogenesis and lymphangiogenesis in 90 specimens of clinically healthy, with gingivitis and chronic periodontitis gingival tissue biopsies. The histological sections were evaluated by hematoxylin and eosin and the immunohistochemical technique through immunostaining for CD34 and podoplanin. To evaluate the angiogenic and lymphangiogenic indexes we performed a microvessel counting technique. The results showed that there is a correlation between the indexes (p = 0.030), however, we observed that periodontitis showed less lymphatic vessels than clinically healthy gingival tissue (p = 0.016). Podoplanin showed positive staining in the basal layers of the epithelium, and we observed a relationship between immunostaining intensity and the intensity of inflammatory infiltrate, with more intense staining in the presence of severe inflammatory infiltrate (p = 0.033). For this study, we concluded that there are fewer blood vessels in periodontitis compared with clinically healthy gingiva. The signaling present in the inflammatory process and the actual role of gingival blood and lymphatic vasculature are not fully understood, with further studies on angiogenesis and lymphangiogenesis being suggested.
Resumo:
Angiogenesis and lymphangiogenesis are changes that occur due to gingival inflammation caused by microorganisms present in the biofilm, as well as the migration of immune cells and secretion of mediators in the aggressed site. This study aimed to research angiogenesis and lymphangiogenesis in 90 specimens of clinically healthy, with gingivitis and chronic periodontitis gingival tissue biopsies. The histological sections were evaluated by hematoxylin and eosin and the immunohistochemical technique through immunostaining for CD34 and podoplanin. To evaluate the angiogenic and lymphangiogenic indexes we performed a microvessel counting technique. The results showed that there is a correlation between the indexes (p = 0.030), however, we observed that periodontitis showed less lymphatic vessels than clinically healthy gingival tissue (p = 0.016). Podoplanin showed positive staining in the basal layers of the epithelium, and we observed a relationship between immunostaining intensity and the intensity of inflammatory infiltrate, with more intense staining in the presence of severe inflammatory infiltrate (p = 0.033). For this study, we concluded that there are fewer blood vessels in periodontitis compared with clinically healthy gingiva. The signaling present in the inflammatory process and the actual role of gingival blood and lymphatic vasculature are not fully understood, with further studies on angiogenesis and lymphangiogenesis being suggested.
Resumo:
PEREIRA, J. P. ; CASTRO, B. P. S. ; VALENTIM, R. A. M. . Kit Educacional para Controle e Supervisão Aplicado a Nível. Holos, Natal, v. 2, p. 68-72, 2009
Resumo:
Para avaliar os efeitos de diferentes tempos de pré-condicionamento isquêmico (IPC) em translocação bacteriana intestinal (BT). MÉTODOS: Trinta ratos Wistar pesando 280 ± 27g foram divididos em cinco grupos. No grupo IV (n = 6), a laparotomia foi realizada e a artéria mesentérica superior foi obstruído por um microclampe atraumática durante 30 minutos. Nos quatro grupos de pré-condicionamento (n = 6 cada) antes dos 30 minutos de isquemia-reperfusão (I / R), os ratos foram submetidos a IPC para duas, cinco, dez e 15 minutos, seguido pelo mesmo momento da reperfusão. A fim de avaliar se o tempo de pré-condicionamento influenciaram o surgimento de translocação bacteriana, as amostras de nódulos linfáticos mesentéricos, fígado e baço foram colhidas em condições estéreis, 24 horas após os procedimentos para a quantificação de unidades formadoras de colónias de bactérias por grama de tecido (CFU / g). O sangue foi recolhido para a medição de citoquinas. RESULTADOS: No grupo I / R, o total de CFU / g em gânglios linfáticos mesentéricos, baço, fígado, bem como o soro de TNF-a, IL-1A e IL-6 foram significativamente mais elevados do que nos outros grupos (p <0,05). Pré-condicionamento por 15 minutos significativamente atenuada BT e citocinas séricas quando comparado a outros períodos de pré-condicionamento (p <0,05). CONCLUSÃO: Nossos dados sugerem que o pré-condicionamento como um fator chave para reduzir a translocação bacteriana intestinal em I / R. Numa escala de dois a 15 minutos, o melhor tempo de pré-condicionamento isquémico pela atenuação da translocação bacteriana foi de 15 minutos
Resumo:
O objetivo deste trabalho foi evidenciar as repercussões histopatológicas da colostomia no segmento desfuncionalizado e, dessa forma, criar um modelo experimental da colite de derivação fecal (CO). Foram utilizados 65 ratos, adultos, da raça Wistar, com peso variando de 220 a 300 g. Os animais foram divididos em 13 grupos, contendo cinco ratos. Do grupo 1 ao grupo 12, os animais foram submetidos a laparotomia mediana, sendo realizada uma colostomia terminal tipo boca única, e observados, por períodos variados de tempo, com o máximo de cem dias. Os animais, após serem mortos, foram necropsiados e retirado o segmento co1ônico desfuncionalizado para a avaliação histopatológica. Essa avaliação consistia de uma análise quantitativa, através da medida da espessura da mucosa colônica, e de uma análise qualitativa, mediante avaliação subjetiva: da presença de infiltrado inflamatório agudo ou crônico na lâmina própria; das alterações na arquitetura das criptas colônicas; da presença de hiperplasia folicular linfóide e de linfócitos na luz dos vasos da submucosa; e da presença de eosinófilos na luz intestinal. No grupo 12, após o 100° dia de pós-operatório (OPO), foi realizada a reconstrução do trânsito intestinal, e, após trinta dias, o cólon descendente foi retirado para a análise histopatológica. O método de Tukey e o teste "t" de Student foram utilizados como parte da análise dos resultados. Verificou-se uma redução estatisticamente significante da espessura da mucosa colônica a partir do 4000PO. Concluiu-se que a colostomia desfuncionalizante realizada em ratos reproduziu alterações histopatológicas compatíveis com a colite de derivação, e que estas mostraram-se reversíveis após a reconstrução do trânsito intestinal
Resumo:
The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure
Resumo:
The genus Saccharum belongs to Poaceae family. Sugarcane has become important monocultures in Brazil due to their products: ethanol and sugar. The production may change between different regions from Brazil. This difference is related to soil, climatic conditions and temperature that promotes oxidative stress that may induce an early flowering. The aim of this work was to identify the effects of oxidative stress. In order to analyse this, sugarcane plants were submitted to oxidative stress using hydrogen peroxide. After this treatment, the oxidative stress were analyzed Then, the plant responses were analyzed under different approaches, using morphophysiological, biochemical and molecular tools. Thus, sugarcane plants were grown under controlled conditions and until two months they were subjected first to a hydroponics condition for 24 hours in order to acclimation. After this period, these plants were submitted to oxidative stresse using 0 mM, 10 mM, 20 mM and 30 mM hydrogen peroxide during 8 hours. The histomorphometric analysis allowed us to verify that both root and leaf tissues had a structural changes as it was observed by the increased in cell volume, lignin accumulation in cell walls. Besides, this observation suggested that there was a change in redox balance. Also, it was analyzed the activity of the SOD, CAT and APX enzymes. It was observed an increase in the SOD activity in roots and it was also observed a lipid peroxidation in leaves and roots. Then, in order to identify proteins that were differently expressed in this conditions it was used the proteomic tool either by bidimensional gel or by direct sequencing using the Q-TOF EZI. The results obtained with this approach identified more than 3.000 proteins with the score ranging from 100-5000 ions. Some of the proteins identified were: light Harvesting; oxygenevolving; Thioredoxin; Ftsh-like protein Pftf precusor; Luminal-binding protein; 2 cys peroxiredoxin e Lipoxygenase. All these proteins are involved in oxidative stress response, photsynthetic pathways, and some were classified hypothetical proteins and/or unknown (30% of total). Thus, our data allows us to propose that this treatment induced an oxidative stress and the plant in response changed its physiological process, it made changes in tissue, changed the redox response in order to survival to this new condition
Resumo:
Although it has been suggested that retinal vasculature is a diffusion-limited aggregation (DLA) fractal, no study has been dedicated to standardizing its fractal analysis . The aims of this project was to standardize a method to estimate the fractal dimensions of retinal vasculature and to characterize their normal values; to determine if this estimation is dependent on skeletization and on segmentation and calculation methods; to assess the suitability of the DLA model and to determine the usefulness of log-log graphs in characterizing vasculature fractality . To achieve these aims, the information, mass-radius and box counting dimensions of 20 eyes vasculatures were compared when the vessels were manually or computationally segmented; the fractal dimensions of the vasculatures of 60 eyes of healthy volunteers were compared with those of 40 DLA models and the log-log graphs obtained were compared with those of known fractals and those of non-fractals. The main results were: the fractal dimensions of vascular trees were dependent on segmentation methods and dimension calculation methods, but there was no difference between manual segmentation and scale-space, multithreshold and wavelet computational methods; the means of the information and box dimensions for arteriolar trees were 1.29. against 1.34 and 1.35 for the venular trees; the dimension for the DLA models were higher than that for vessels; the log-log graphs were straight, but with varying local slopes, both for vascular trees and for fractals and non-fractals. This results leads to the following conclusions: the estimation of the fractal dimensions for retinal vasculature is dependent on its skeletization and on the segmentation and calculation methods; log-log graphs are not suitable as a fractality test; the means of the information and box counting dimensions for the normal eyes were 1.47 and 1.43, respectively, and the DLA model with optic disc seeding is not sufficient for retinal vascularization modeling
Resumo:
Seed germination and seedling establishment are critical processes for commercial plantation and depend directly on reserve mobilization as a source of cellular fuels and biosynthetic precursors. In this way, we investigated the coordination among reserve mobilization, metabolite partitioning, and mobilizing enzyme activities in Moringa oleifera Lam (moringa) an oil-seeded species employed in biofuel production. Seeds were germinated under controlled conditions and seedlings were grown hydroponically at a greenhouse. Samples were harvested at 0, 4, 8, 10, 12, 16, and 20 days after imbibition (DAI). The contents of dry mass (DM), neutral lipids (NL), soluble proteins (SP), starch, total soluble sugars (TSS), non-reducing sugars (NRS), and total free amino acids (TFAA) as the activity of isocitrate lyase (ICL), acid proteases, and amylases were determined. The mobilization of storage proteins was initiated during seed germination whereas the mobilization of storage lipids and starch was triggered throughout seedling establishment although all reserves have been depleted until 20 DAI. The partitioning of DM and metabolites to the roots and the shoots was uneven during seedling establishment. Low shoot/root ratio on the basis of DM could be related to the natural occurrence of moringa in drought climates. In the roots, TSS, NRS, and TFAA were accumulated from 12 to 16 DAI and then were consumed until the end of the experiment. In the shoots, TSS and TFAA were consumed in parallel with NRS accumulation from 12 to 20 DAI. The activity of ICL, acid proteases, and amylases was coordinated with the mobilization of lipids, proteins and starch respectively. Thus, we propose that the patterns of reserve mobilization and metabolite partitioning verified in moringa seem distinct from those found to other tree species and may be involved in metabolic strategies to enable environment colonization
Resumo:
The pressure ulcers (PU), also known as decubitus ulcers, are defined as injuries caused by the constant pressure exerted on a particular point of the body, causing impairment of blood supply with a decrease or interruption of tissue irrigation, causing occlusion of blood vessels and capillaries, ischemia and cell death. This is a descriptive study with longitudinal design, and panel type, with quantitative approach that aimed to examine the association between predisposing conditions (PC), intrinsic factors (IF) and extrinsic factors (EF) with the occurrence of PU, in hospitalized patients in the Intensive Care Unit (ICU), pain clinical, surgical clinical and neurology wards of a university hospital. The study population was composed of all patients who were restricted to bed during the period from December 2007 to February 2008. The study was approved by the Ethics Committee of HUOL / UFRN (No 135/07). The data-collection took place through a structured formulary of observation, data from medical records and physical examination of patients skins. The results were organized in SPSS 15.0 software, tabulated, categorized and analyzed by descriptive and inferential statistics. Of the 30 patients studied, 43.3% had been hospitalized in the pain clinical and surgical clinic wards, 20.0% in the ICU, 20.0% in the ICU / ward and 16.7% in neurology, being the length of hospitalization in those units of 7 to 18 days (63.3%) and from 19 to 30 days (36.7%), predominantly female and aged ≥ 60 years (60.0%). 19 PU were diagnosed in 43.3% of patients monitored, being 38.5% with one PU between 7 to 18 days and 46.2% with two or more between 19 to 30 days of hospitalization, showing significant relationship (ρ-value = 0029) between length of hospital stay and the number of PU. Was found an association of 35.7% of the PC (cardio-respiratory, hematological, metabolic and psychogenic), IF (age group, oedema, skin changes in humidity and change of body temperature) and EF (type of mattress and strength of body pressure) for all patients studied, statistically significant (ρ-value = 0001), between the average scores in patients with and without PU, with reason chance to 12.0 for the development of PU and there was moderate correlation ( r = 0618) in the presence of this association. Results show the influence of the multiplicity of factors and conditions on the occurrence of PU, which brings us to reflect on the assistance focused on prevention and reduction of these injuries which will encourage the reduction of hospitalization length, physical and psychological suffering, and the possibility of improving the clinical condition of the patient.
Resumo:
The present work deals with the linear analysis of bi-dimensional axisymmetric structures, through development and implementation of a Finite Element Method code. The structures are initially studied alone and afterwards compatibilized into coupled structures, that is, assemblages, including tanks and pressure vessels. Examples are analysed and, in order to prove accuracy, the results were compared with those furnished by the analytical solutions
Resumo:
This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV
Resumo:
The purpose of this study was to develop a pilot plant which the main goal is to emulate a flow peak pressure in a separation vessel. Effect similar that is caused by the production in a slug flow in production wells equipped with the artificial lift method plunger lift. The motivation for its development was the need to test in a plant on a smaller scale, a new technique developed to estimate the gas flow in production wells equipped with plunger lift. To develop it, studies about multiphase flow effects, operation methods of artificial lift in plunger lift wells, industrial instrumentation elements, control valves, vessel sizing separators and measurement systems were done. The methodology used was the definition of process flowcharts, its parameters and how the effects needed would be generated for the success of the experiments. Therefore, control valves, the design and construction of vessels and the acquisition of other equipment used were defined. One of the vessels works as a tank of compressed air that is connected to the separation vessel and generates pulses of gas controlled by a on/off valve. With the emulator system ready, several control experiments were made, being the control of peak flow pressure generation and the flow meter the main experiments, this way, it was confirmed the efficiency of the plant usage in the problem that motivated it. It was concluded that the system is capable of generate effects of flow with peak pressure in a primary separation vessel. Studies such as the estimation of gas flow at the exit of the vessel and several academic studies can be done and tested on a smaller scale and then applied in real plants, avoiding waste of time and money.