5 resultados para UNITARY
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry
Resumo:
This research objectify to analyze the effects of minimum wage recovery in the household consumption in the Brazil, northeastern region of the Brazil and the state of the Rio Grande do Norte, in the period of 1995 to 2011. This is because the search for the strengthening of the internal market, via incentive policies to private demand has assumed prominence in the Government agenda. Thus, under the justification of the fierce debate about the effectiveness of countercyclical policies of Brazil, in view of the recent economic crisis, aims to: 1) retake the theoretical debate and, to a certain extent, the evolution of the theory of household consumption, as well as some conclusions about their connection with the minimum wage; 2) to describe the experiences and the effects of this legislation in economic history, with emphasis on the Brazilian case; 3) to present some of the available statistics to research bases, with attention to the specifics of each and the empirical results found for consumption in Brazil; 4) to estimate the effects of minimum wage variation in household consumption in Brazil (BR), northeast (NE) and Rio Grande do Norte (RN). From this, in order to quantify this relationship, makes inferences from the effects of the wage bill and the minimum wage on consumption, in quarterly series (with ad hoc adjustment from the "weights" of each quarter), from classic model of multiple linear regression. The hypothesis is that released: increments in income, derived from the policy of minimum wage recovery will influence directly the household consumption. However, when comparing the results between the units analyzed, the expressiveness of the northeastern families of Brazil and Rio Grande do Norte families front national dynamics with income linked to this floor, drives most significant impacts spending decisions in NE and RN, thus reducing regional disparities in the consumer. The results indicate contrary evidence, because while for the BR a unitary variation in minimum wage increases the consumption in units monetary 1.28, to the NE and RN these parameters are respectively 1.05 and 1.09
Resumo:
This Master of Science Thesis deals with a study on applying the BSC Balanced Scorecard to assess the performance of Federal Centers for Technological Education Institution in Brazil, the CEFET s (Centro Federal de Educação Tecnológica), government organizations non for profit. It s accomplished a literature review in order to understand the BSC and its application to non for profit organizations and as a main result it is proposed a BSC conceptual model with an inversion of the main BSC perspective from financial to customer/society. Taking the FORPLAN/CONCEFET performance indicators matrix it is developed a set of performance indicators for the two tops perspective in the conceptual model proposed five for customer/society perspective and three for financial/budget perspective. A field survey with ten CEFET s General Directors is conducted to validate the indicators and assess the perception of the Directors on the hierarchy of the conceptual model, and a hierarchy among the indicators as well. The main results suggests that the indicators are validated, that most of the Directors support the hierarchy presented in the conceptual model but 30% of them have a traditional model with financials coming first. In terms of indicator hierarchy, there s a slight priority for the student unitary cost among the financial perspective indicators, and a relative balance among the customer/society perspective indicators
Resumo:
This paper deals of the effects generated by institutional designs in the behavior of political actors. The literature that discusses the implications of federal arrangements in the production of public policies to dock at two opposing arguments: (1) the federal configuration would cause dispersion and variation in service provision between subnational governments; and (2) the central government would own mechanisms to induce the provision of national policies in more homogeneous levels, similar to unitary states. The research is part of this discussion because it analyzes the effects of the institutional design of the Sistema Único de Assistência Social (SUAS) in the decisions of states in Brazil. Therefore, we analyzed the institutional capacity built by the 26 state governments after the implementation of SUAS, conceiving this system as defined mechanism of government functions and federative cooperation.It is argued that the existence of a heterogeneous institutional capacity of state governments in social assistance is a result of the autonomy contained in the institutional design of SUAS to this level of government. This freedom of action relativize the idea that the implementation of national public policy systems would generate positive (or homogeneous) effects in all subnational governments, at the same time as it preclude to generalize the premise of fragility of the states in the brazilian federal plan.
Resumo:
Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry