Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Os significados do tabagismo construídos na dinâmica social

The present study has the purpose of catching the significances of smoking in the social dinamics based on the Theory of Social Representations. It was developed among adults with ages from 20 to 59 years, low social and economic conditions, at Natal RN, Brazil. The Free-words Association Test was applied as the instrument of data collection and a semi-structured interview with the smokers and non-smokers, besides a structured interview with smokers, non-smokers and ex-smokers. All data was analyzed by the descriptive statistics using the Analysis of Content Technique of the thematic kind and by the softwares ALCESTE and EVOC 2000. Elaborations about smoking were marked by social, cultural and historical dimension, however they showed sensibility to changes and revealed positive and negative aspects of the habit. The analysis of the semi-structured interviews showed the following categories and under-categories respectively: Initiation of the habit (Friends and Family and Appreciation and Beauty); Psychosocial Implications of smoking (Personal relationship, Work and Financial); Behavior when facing smoking (Positive, Negative and Neutral); Smoking Effects (Smokers´ health and the other people health); Description about oral diseases ( Bad breath, Oral cancer and Dental problems); Smoking treatment (Physician and psychological, Supernatural and Difficulties). ALCESTE analysis presented 4 classes: Ambivalence between pleasure and get ill, Smoking as a trouble and danger to society, Social discrimination of smokers and Mouth as a place of reaffirmation of the discrimination. Those helped us to understand the psychosocial repercussion of the habit. On the social representation structure we identified as a probable central nucleus of the smoker group the categories Pleasure and Bad to the health and as peripheral elements Alcoholic Drink, Financial damage and Nervousness. For the non-smoker group the category Bad to the health comes first and Stop Smoking comes as a peripheral element. Finally, we hope that the knowledge of these representations can contribute to plan and/or to rethink over the professional practices and public policies related to smoking. Besides that, for an amplified comprehension of the study object the discussions over the identified representations should be deepen and amplified to other population and social groups

Saúde mental na estratégia saúde da família: notas cartográficas sobre processos de trabalho em saúde

This study aims to map the working process in the health area starting from the meeting between the family and health teams and mental trouble carriers./MTC. The area of research was the Family Health Unit of Ozeas Sampaio, which is located in the county of Teresina-PI. As regard to the methodology procedure, we used a semi-structured interview timetable, aimed to detail the care practices, admittance and diagnostics that those teams realize with their users. Three teams of eleven workers each were interviewed. There was a doctor, a nurse and two health community agents in each team. The other tools we used were a camp logbook, in which we wrote down some informal dialogs, daily observations and feelings of the unit, and also the accompaniment of the staffs in house calls as well as the weekly meetings in the unit. Those meetings allowed us the construction of two analytic axes: 1) description of the establishment (Family Health Unit) of the organization, (municipal foundation of health and the service network), and the institutions and practice of health. 2) Analysis of the meetings between the worker and the user of Mental Trouble Carriers. In the first axis, we verified the repetition of the working logic focused on jobs in the hospital with the maintenance of the hierarchical relations between worker and the work processes which dissociate management and watchfulness in health care. We identified the lack of physical structure, the lack of self-confidence of the worker in the attention of the mental health care. At the second axis, we assess that the meetings, at the Family Health Unit (FHU) or at the dwelling of the users cause nuisance, discomfort and anxiety to the workers because they deal with issues that go beyond what is named as being the health order such as life stories, family conflicts, unemployment, hunger, sexual and psychological violence. As a matter of fact, they involve difficulties for having new relationships, reception and responsibility for this request

Indicadores e fatores preditivos de uso abusivo de álcool em adultos jovens

The abusive use of alcohol is closely related to dependence and to social and work damages. The main focus of this thesis is to create an instrument about alcohol abuse, in order to differentiate the degree of commitment of the symptomatology, considering its psychosocial factors of prediction. As specific goals: I) characterize the state of the art about assessment related to the abuse and dependence to alcohol; II) investigate and systematize aspects related to the predictive psychosocial factors for alcohol dependence; III) build an instrument for the assessment of alcohol abuse and protection and risk factors for the development of an alcohol dependence; and IV) verify validity evidence of the instrument built for the Brazilian population. In Study I, it was possible to observe the prevalence of articles related to the use of alcohol in a problematic way, without a classification dependence, it is lower than the one of articles that investigate the disease when it is already manifested, not to mention a few systematic studies about the theme of alcohol abuse in the scientific environment. In Study II, focus groups (FGs) were conducted, the analysis about the discourses of the focus groups were made through the ALCESTE software and it was possible to observe a response pattern that existed among the participants in different groups, with the generation of five classes. In Study III, we developed an instrument that contemplated aspects of the Alcohol Dependence Syndrome of the Millon Clinical Multiaxial Inventory-III, in addition to the characteristics defined in Study I and in Study II. The final version of the instrument had 59 items assessed through the likert scale of five points. In Study IV, the administration of the instrument was performed in an online format with university students ranging from 18 to 24 years old, residents in Brazilian metropolitan cities. The results evidenced that the internal consistency of the instrument is considered satisfactory (α = 0,882) and in what it refers to classes, the most significant data was the one related to financial loss and criteria for the diagnosis of alcohol abuse. It is important to consider the evaluative potential of risk and protective factors for the development of alcohol dependence of the instrument as a whole. Once the indicators of abuse and the profile of the abusers has been modified, the patient may have his/her treatment/intervention focused on the trouble and/or specific syndrome, thus having a clear and fast improvement.

A probabilistic analysis of the biometrics menagerie existence: case study in fingerprint data

Until recently the use of biometrics was restricted to high-security environments and criminal identification applications, for economic and technological reasons. However, in recent years, biometric authentication has become part of daily lives of people. The large scale use of biometrics has shown that users within the system may have different degrees of accuracy. Some people may have trouble authenticating, while others may be particularly vulnerable to imitation. Recent studies have investigated and identified these types of users, giving them the names of animals: Sheep, Goats, Lambs, Wolves, Doves, Chameleons, Worms and Phantoms. The aim of this study is to evaluate the existence of these users types in a database of fingerprints and propose a new way of investigating them, based on the performance of verification between subjects samples. Once introduced some basic concepts in biometrics and fingerprint, we present the biometric menagerie and how to evaluate them.

A probabilistic analysis of the biometrics menagerie existence: case study in fingerprint data

Until recently the use of biometrics was restricted to high-security environments and criminal identification applications, for economic and technological reasons. However, in recent years, biometric authentication has become part of daily lives of people. The large scale use of biometrics has shown that users within the system may have different degrees of accuracy. Some people may have trouble authenticating, while others may be particularly vulnerable to imitation. Recent studies have investigated and identified these types of users, giving them the names of animals: Sheep, Goats, Lambs, Wolves, Doves, Chameleons, Worms and Phantoms. The aim of this study is to evaluate the existence of these users types in a database of fingerprints and propose a new way of investigating them, based on the performance of verification between subjects samples. Once introduced some basic concepts in biometrics and fingerprint, we present the biometric menagerie and how to evaluate them.

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry