Controle inteligente de sistemas eletroidráulicos utilizando redes neurais artificiais

This work describes the development of a nonlinear control strategy for an electro-hydraulic actuated system. The system to be controlled is represented by a third order ordinary differential equation subject to a dead-zone input. The control strategy is based on a nonlinear control scheme, combined with an artificial intelligence algorithm, namely, the method of feedback linearization and an artificial neural network. It is shown that, when such a hard nonlinearity and modeling inaccuracies are considered, the nonlinear technique alone is not enough to ensure a good performance of the controller. Therefore, a compensation strategy based on artificial neural networks, which have been notoriously used in systems that require the simulation of the process of human inference, is used. The multilayer perceptron network and the radial basis functions network as well are adopted and mathematically implemented within the control law. On this basis, the compensation ability considering both networks is compared. Furthermore, the application of new intelligent control strategies for nonlinear and uncertain mechanical systems are proposed, showing that the combination of a nonlinear control methodology and artificial neural networks improves the overall control system performance. Numerical results are presented to demonstrate the efficacy of the proposed control system

Sistemas de dunas do parque das Dunas e Barreiras do Inferno/Natal (RN: levantamento geológico /geofísico, elaboração do modelo deterministico e avaliação da vulnerabilidade/suscetibilidade

The current work was developed on the dune systems of the Parque das Dunas and Barreira do Inferno. These places are located in the cities of Natal and Parnamirim (RN, Brazil), respectively. This project has the purpose of developing the deterministic model on a specific blowout at Parque das Dunas, based in the geophysical interpretations of the lines gotten with the Ground Penetration Radar and the planialtimetric acquisitions of the topographical surface of the land. Also analyses of the vulnerability/susceptibility of these dune systems had been done in relation to the human pressures. To develop its deterministic model, it is necessary to acquire inner and outer geometries of the cited blowout. In order to depict inner geometries underneath the surface are used the GPR observing the altimetric control for topographical correction of the GPR lines. As for the outer geometries, the geodesic GPS gives us the planialtimetric points (x, y and z points) with milimetric precision, resulting in high-resolution surfaces. Using interpolation methods of the planialtimetric points was possible create Digital Elevations Models (DEM´s) of these surfaces. As a result, 1,161.4 meters of GPR lines were acquired on the blowout at the Parque das Dunas and 3,735.27 meters on the blowout at the Barreira do Inferno. These lines had been acquired with a 200 MHz antenna, except the 7 and 8 lines, for which we had been used a 100 MHz antenna. The gotten data had been processed and interpreted, being possible to identify boundary surfaces of first, second and third order. The first order boundary surface is related with the contact of the rocks of the Barreiras Group with the aeolian deposits. These deposits had been divided in two groups (Group 1 and Group 2) which are related with the geometry of stratum and the dip of its stratifications. Group 1 presented stratum of sigmoidal and irregular geometries and involved bodies where the reflectors had presented dips that had varied of 20 to the 28 degrees for the Parque das Dunas blowout and of 22 to the 29 degrees for the Barreira do Inferno blowout. Usually, it was limited in the base for the first order surface and in the top for the second order surface. Group 2 presented stratum of trough, wedge or lens geometries, limited in the base for the second order vi surface, where the corresponding deposits had more shown smoothed reflectors or with dips of low angle. The Deterministic and Digital Elevation Models had been developed from the integration and interpretation of the 2D data with the GOCAD® program. In Digital Elevations Models it was possible to see, for the localities, corridor or trough-shaped blowouts. In Deterministic Model it was possible to see first and second order boundary surfaces. For the vulnerability/susceptibility of the dune systems it was applied the methodology proposal by Boderè al (1991); however the same one did not show adequate because it evaluates actual coastal dunes. Actual coastal dunes are dunes that are presented in balance with the current environmental conditions. Therefore, a new methodology was proposal which characterizes the supplying and activity sedimentary, as well as the human pressures. For the methodology developed in this work, both the localities had presented a good management. The Parque das Dunas was characterized as a relic dune system and the Barreira do Inferno was characterized as a palimpsestic dune system. Also two Thematic Maps had been elaborated for the environmental characterization of the studied dune systems, with software ArcGis 8.3, and its respective data bases

Caracterização geológica tridimensional e monitoramento de dunas no litoral oriental do Rio Grande do Norte

This work presents geophysical and geological results obtained in a dunefield located in the east coast of Rio Grande do Norte State, with the aim to recognize the aeolian body depositional geometries to a future geologic modeling of the aeolian petroliferous reservoirs. The research, which was done in blowouts region situated at Nisia Floresta Municipally, included the characterization of external geometries with GPS and internal geometry analysis by GPR. Data was integrated in GoCAD software, where it was possible the three-dimensional characterization and interpretation of the studied deposits. The interpretation of GPR profiling allowed identifying: First-order bounding surfaces that separated the aeolian deposits of the Barreiras Formation rocks; Second-order bounding surfaces, which limit dune generations and Third-order bounding surfaces, a reactivation surface. This classification was based and adapted by the Brookfield (1977) and Kocurek (1996) propose. Four radarfacies was recognized: Radarfacies 1, progradational reflectors correlated to foresets of the dunes, Radarfacies 2, plain parallels reflectors related to sand sheets, Radarfacies 3, plain parallels reflectors associated to reworking of the blowout dune crest and Radarfacies 4, mounded reflectors associated to vegetated mound of sand or objects buried in subsurface. The GPR and GPS methods was also employed to the monitoring of dunefields susceptible to human activities in Buzios Beach, where the constructions along the blowout region and the tourism are changing the natural evolution of the deposits. This fact possibly to cause negative impacts to the coastal zone. Data obtained in Dunas Park, a unit environmental conservation, was compared with information of the Buzios Beach. There is a major tendency of erosion in Buzios, specifically in blowout corridor and blowout dune

Versão breve da social rhythm metric: um instrumento para avaliar ritmo social de pacientes com acidente vascular cerebral

Stroke is a neurological disorder caused by restriction of blood flow to the brain, which generates directly a deficit of functionality that affects the quality of life of patients. The aim of this study was to establish a short version of the Social Rhythm Scale (SRM), to assess the social rhythm of stroke patients. The sample consisted of 84 patients, of both sexes, with injury time exceeding 6 months. For seven days, patients recorded the time held 17 activities of SRM. Data analysis was performed using a principal components factor analysis with varimax rotation of the full version of SRM in order to determine which activities could compose brief versions of SRM. We then carried out a comparison of hits, the ALI (Level Activity Index) and SRM, between versions, by Kruskal-Walls and the Mann-Whitney test. The Spearman correlation test was used to evaluate the correlation between the score of the full version of SRM with short versions. It was found that the activities of SRM were distributed in three versions: the first and second with 6 activities and third with 3 activities. Regarding hits, it was found that they ranged from 4.9 to 5.8 on the first version; 2.3 to 3.8 in version 2 and 2.8 to 6.2 in version 3, the first the only version that did not show low values. The analysis of ALI, in version 1, the median was 29, in version 2 was 14 and in version 3 was 18. Significant difference in the values of ALI between versions 1 and 2, between 2 and 3 and between versions 1 and 3. The highest median was found in the first version, formed by activities: out of bed, first contact, drink coffee, watch TV in the evening and go to bed. The lowest median was observed in the second version and this was not what had fewer activities, but which had social activities. The medians of the SRM version 1 was 6, version 2 was 4 and version 3 was 6. Significant difference in the values of SRM between versions 1 and 2 and between 2 and 3, but no significant difference between versions 1 and 3. Through analysis, we found a significant correlation only between the full version and the version 1 (R2 = 0.61) (p <0.05), no correlation was found with version 2 (R2 = 0.007) nor with version 3 (R2 = 0.002), this was finally a factor to consider version 1 as the short brazilian version of the Social Rhythm Metric for stroke patients