Projeto, construção e análise de um prototipo vibracional em escala de bancada aplicável ao tratamento de água de produção de petróleo bruto, mediante inovadora operação híbrida de adsorção e auto-flotação

A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity

O direito fundamental contra a autoincriminação: a análise a partir de uma teoria do Processo Penal Constitucional

The right against self-incrimination is a fundamental right that works in the criminal prosecution, and therefore deserves a study supported by the general theory of criminal procedure. The right has a vague origin, and despite the various historical accounts only arises when there is a criminal procedure structured that aims to limit the State´s duty-power to punish. The only system of criminal procedure experienced that reconciles with seal self-incrimination is the accusatory model. The inquisitorial model is based on the construction of a truth and obtaining the confession at any cost, and is therefore incompatible with the right in study. The consecration of the right arises with the importance that fundamental rights have come to occupy in the Democratic Constitutional States. In the Brazilian experience before 1988 was only possible to recognize that self-incrimination represented a procedural burden for accused persons. Despite thorough debate in the Constituent Assembly, the right remains consecrated in a textual formula that´s closer to the implementation made by the Supreme Court of the United States, known as "Miranda warnings", than the text of the Fifth Amendment to the U.S. Constitution that established originally the right against self-incrimination with a constitutional status. However, the imprecise text does not prevent the consecration of the principle as a fundamental right in Brazilian law. The right against self-incrimination is a right that should be observed in the Criminal Procedure and relates to several of his canons, such as the the presumption of not guilty, the accusatory model, the distribution of the burden of proof, and especially the right of defense. Because it a fundamental right, the prohibition of self-incrimination deserves a proper study to her constitutional nature. For the definition of protected persons is important to build a material concept of accused, which is different of the formal concept over who is denounced on the prosecution. In the objective area of protection, there are two objects of protection of the norm: the instinct of self-preservation of the subject and the ability to self-determination. Configuring essentially a evidence rule in criminal procedure, the analysis of the case should be based on standards set previously to indicate respect for the right. These standard include the right to information of the accused, the right to counsel and respect the voluntary participation. The study of violations cases, concentrated on the element of voluntariness, starting from the definition of what is or is not a coercion violative of self-determination. The right faces new challenges that deserve attention, especially the fight against terrorism and organized crime that force the development of tools, resources and technologies about proves, methods increasingly invasive and hidden, and allow the use of information not only for criminal prosecution, but also for the establishment of an intelligence strategy in the development of national and public security

Um sistema para estimação da vazão de gás de poços produzindo por Plunger Lift para vaso separador de teste em plataformas de petróleo

This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV