AIGA: um ambiente integrado de gerência para redes em malha sem fio IEEE 802.11s

A Wireless Mesh Network (WMN - Wireless Mesh Network) IEEE 802.11s standard to become operational it is necessary to configure the parameters that meet the demands of its users, as regards, for example, the frequency channels, the power antennas, IPs addresses, meshID, topology, among others. This configuration can be done via a CLI (Command - Line Interface) or a remote interface provided by the equipment manufacturer, both are not standardized and homogeneous, like black boxes for the developers, a factor that hinders its operation and standardization. The WMN, as a new standard, is still in the testing phase, and tests are necessary to evaluate the performance of Path Discovery Protocol, as in this case of HWMP (Hybrid Wireless Mesh Protocol), which still has many shortcomings. The configuration and test creation in a WMN are not trivial and require a large workload. For these reasons this work presents the AIGA, a Management Integrated Environment for WMN IEEE 802.11s, which aims to manage and perform testbeds for analyzes of new Path Discovery Protocols in a WMN

Estratégias distribuídas para a coexistência de redes de banda larga sem fio em bandas não-licensiadas

The increasing demand for Internet data traffic in wireless broadband access networks requires both the development of efficient, novel wireless broadband access technologies and the allocation of new spectrum bands for that purpose. The introduction of a great number of small cells in cellular networks allied to the complimentary adoption of Wireless Local Area Network (WLAN) technologies in unlicensed spectrum is one of the most promising concepts to attend this demand. One alternative is the aggregation of Industrial, Science and Medical (ISM) unlicensed spectrum to licensed bands, using wireless networks defined by Institute of Electrical and Electronics Engineers (IEEE) and Third Generation Partnership Project (3GPP). While IEEE 802.11 (Wi-Fi) networks are aggregated to Long Term Evolution (LTE) small cells via LTE / WLAN Aggregation (LWA), in proposals like Unlicensed LTE (LTE-U) and LWA the LTE air interface itself is used for transmission on the unlicensed band. Wi-Fi technology is widespread and operates in the same 5 GHz ISM spectrum bands as the LTE proposals, which may bring performance decrease due to the coexistence of both technologies in the same spectrum bands. Besides, there is the need to improve Wi-Fi operation to support scenarios with a large number of neighbor Overlapping Basic Subscriber Set (OBSS) networks, with a large number of Wi-Fi nodes (i.e. dense deployments). It is long known that the overall Wi-Fi performance falls sharply with the increase of Wi-Fi nodes sharing the channel, therefore there is the need for introducing mechanisms to increase its spectral efficiency. This work is dedicated to the study of coexistence between different wireless broadband access systems operating in the same unlicensed spectrum bands, and how to solve the coexistence problems via distributed coordination mechanisms. The problem of coexistence between different networks (i.e. LTE and Wi-Fi) and the problem of coexistence between different networks of the same technology (i.e. multiple Wi-Fi OBSSs) is analyzed both qualitatively and quantitatively via system-level simulations, and the main issues to be faced are identified from these results. From that, distributed coordination mechanisms are proposed and evaluated via system-level simulations, both for the inter-technology coexistence problem and intra-technology coexistence problem. Results indicate that the proposed solutions provide significant gains when compare to the situation without distributed coordination.

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Implementação de um Módulo de Supervisão para um Sistema de Detecção de Vazamentos em Dutos de Petróleo

The transport of fluids through pipes is used in the oil industry, being the pipelines an important link in the logistics flow of fluids. However, the pipelines suffer deterioration in their walls caused by several factors which may cause loss of fluids to the environment, justifying the investment in techniques and methods of leak detection to minimize fluid loss and environmental damage. This work presents the development of a supervisory module in order to inform to the operator the leakage in the pipeline monitored in the shortest time possible, in order that the operator log procedure that entails the end of the leak. This module is a component of a system designed to detect leaks in oil pipelines using sonic technology, wavelets and neural networks. The plant used in the development and testing of the module presented here was the system of tanks of LAMP, and its LAN, as monitoring network. The proposal consists of, basically, two stages. Initially, assess the performance of the communication infrastructure of the supervisory module. Later, simulate leaks so that the DSP sends information to the supervisory performs the calculation of the location of leaks and indicate to which sensor the leak is closer, and using the system of tanks of LAMP, capture the pressure in the pipeline monitored by piezoresistive sensors, this information being processed by the DSP and sent to the supervisory to be presented to the user in real time

Avaliação da gravidade do trauma em condutores de motocicleta vítimas de acidentes de trânsito no Rio Grande do Norte

Descriptive exploratory study, prospective, with quantitative approach, performed on the Monsenhor Walfredo Gurgel Hospital Complex (MWGHC), in Natal/RN, aiming to identify injuries by body area and wound severity on drivers who suffered motorcycle accidents, evaluate the severity of injuries and trauma on these drivers and identify the existence of association between wound and trauma severity and some of the accident s characteristics. The population comprised 371 motorcycle drivers, with data collected between October and December 2007. We used as instruments the Abberviated Injury Scale (AIS), Injury Severity Score (ISS) and the Glasgow Coma Scale (GCE1). The results show that, concerning characterization, there was a predominance of the male gender (88.4%), aged between 18 and 24 years (39.90%), originating from the Natal metropolitan region (55.79%), with fundamental-level instruction (51.48%), catholic (75.78%), married (47.98%). 23.18% work on commerce-related activities and 75.20% have income of up to 2 minimum wages. As for the accident s characteristics, the predominant shift was the afternoon (46.36%), received up to one hour after the event (50.67%), transported by countryside ambulances colleagues and relatives (51.21%), 25.34% had the accident on Sunday; 53.91% suffered falls and vehicle rolls; among the collisions there was a predominance of the motorcycle-automoblie type (28.03%); 52,6% were licensed and among these 50.76% had up to one year of license; 65.50% declared not having suffered previous accidents; 65.77% declared waring helmets in the time of the accident; 57.41% said not to have used drugs, and among those who used, alcohol was the most consumed (98.10%). The lowest score evaluated by GCS1 (3 to 8) was linked to drivers who suffered accidents on Saturday (10.3%), those who were not wearing helmets (14.29%) and the victims of motorcycle-pedestrian/animal crashes (13.33%). The body areas most affected had AIS between 1 and 3 (95.76%) and were: external surface (39.90%) and head/neck (33.20%). As for trauma severity, the highest scores (ISS>25) belonged to those who consumed alcohol (30.73%), suffered falls or vehicle rolls (48.9%) and those attended to 3 hours or longer after the accident (50%). We conclude that for motorcycle drivers who suffered accidents, age, gender, weekday, type of accident, use of drugs and the absence of helmet use signal both to the risk of occurrence of these events, as well as for the greater severity of injuries and trauma.

Caracterização do acidente de trânsito e gravidade do trauma: um estudo em vítimas de um hospital de emergência de Natal

Descriptive exploratory study, with quantitative approach and prospective data performed on the Monsenhor Walfredo Gurgel Hospital Complex (MWGH), in Natal/RN, aiming to classify the type of motor vehicle involved in the accident, the public roadway s user quality and the more frequent injuries; to evaluate the severity of trauma in traffic accident victims; characterized the severity of the injuries and the trauma, and the type of motor vehicle involved. The population comprises 605 traffic accident victims, with data collected between October and December 2007. We used as a support for the evaluation of severity of injuries and trauma the Glasgow Coma Scale (GCSl), the Condensed Abbreviated Injury Scale (CAIS) and the Injury Severity Score (ISS). The results show that 82.8% of the victims were male; 78.4% were aged 18 to 38; the victims originating from the State s Countryside prevailed (43.1%); 24.3% of the population had completed middle-level instruction; 23.1% worked on commerce and auxiliary activities; most (79.4%) was catholic; 48.8% were married/consensual union; 76.2% earned up to two monthly minimum wages; Sunday was the day with the most accidents (25.1%); 47.4% were attended to in under an hour after the event; the motorcycle on its own was responsible for 53.2% of the accidents; 42.3% were attended to by the SAMU; 61.8% were victims of crashes; over half (53.4%) used individual protection equipment (IPE); 49.4% were helmets and 4.0% the seatbelt; 61.3% were motorcycle drivers; 43.3% of the accidents took place in the afternoon shift; from 395 drivers, 55.2% were licensed, and 50.7% among those had been licensed for 1 to 5 years; 90.7% of the victims had GCS1 between 13 and 15 points at the time of evaluation; the body area most affected was the external surface (35.9%); 38.8% of the injuries were light or moderate (AIS=1 and AIS=2); 83.2% had light trauma (ISS between 1 and 15 points). In face of the results, we can conclude that there is a risk for the elevation of injury severity and trauma resulting from traffic accidents, when these events are related to certain variables such as gender, age, weekday, the interval between the accident and the first care, ingestion of drugs, type of accident, the public roadway s user quality, the use of IPE, day shift, body regions and the type of motor vehicle involved in the accident

A Acessibilidade como veículo de inclusão social: proposta de dispositivo computacional para os deficientes visuais da cidade de Natal/RN

This study aims to propose a computing device mechanism which is capable to permit a tactile communication between individuals with visual impairment (blindness or low vision) through the Internet or through a local area network (LAN - Local Network Address). The work was developed under the research projects that currently are realized in the LAI (Laboratory of Integrated Accessibility) of the Federal University of Rio Grande do Norte. This way, the research was done in order to involve a prototype capable to recognize geometries by students considered blind from the Institute of Education and Rehabilitation of Blind of Rio Grande do Norte (IERC-RN), located in Alecrim neighborhood, Natal/RN. Besides this research, another prototype was developed to test the communication via a local network and Internet. To analyze the data, a qualitative and quantitative approach was used through simple statistical techniques, such as percentages and averages, to support subjective interpretations. The results offer an analysis of the extent to which the implementation can contribute to the socialization and learning of the visually impaired. Finally, some recommendations are suggested for the development of future researches in order to facilitate the proposed mechanism.

Os youtubers e a representação do certo, errado, adequado e inadequado no trabalho com a variação linguística em sala de aula

Some of the current discussions in the teaching of Portuguese Language (LP) pertain to how the school should deal with the phenomenon of language variation in the classroom. In 2010, for example, an explosion of talk took over the academic corridors: a book, entitled "Por uma vida melhor", the collection "Viver, Aprender", published by the MEC (Ministry of Education and Culture) to students EJA (Youth and Adults) brought notions regarding linguistic variation, even in their first chapter. In it is clear the notion that it is possible to make use of structures as "pretty boy", instead of "pretty boys", depending on the context in which such use is insert. Therefore, the discussions focused around the notions of variety cultivated, standard and popular measuring them to the possibilities of linguistic appropriateness. The community was surprised by the defense of the "power" to use, since it would be the school space to teach a standard "default", and not the possibility of legitimate use of grammatical patterns that clashed with those recommended in traditional grammars. The television media has been responsible for a major blaze that MEC had endorsed the use in schools of a book that legitimized such linguistic patterns. The quarrel was released on Youtube and in that space, netizens expressed themselves for or against the proposal of LD often directing the discussion to questions of a purely political. We observed that, on one side, loomed arguments related to Sociolinguistics (BAGNO , 2002, 2003, 2007, 2009; BAGNO, M.; STUBBS, M., Gagne, G., 2006; Bortoni - RICARDO, S.M., 2008; Tarallo, F., 1982; U. Weinreich, MARVIN I. HERZOG, Labov, W., 1968, Labov 1972, etc.); another, arguments concentrated on defending the school is the area of language teaching standard, and not fit to bring certain discussions within an LD. It was from these words, that this research was born. Interested in the particular way that the community media, which seemed to have no training in linguistics, understand the concepts of right, wrong, appropriate and inappropriate, so intimate in academic circles. Our thoughts take as reference the theoretical studies on the question of sociolinguistic variation and education, official documents that guide the "work" with the Portuguese language in the classroom, like the NCP (National Curriculum) and Curriculum Proposal for Education Youth and Adult (PCEJA). In our analysis, we found that LD" For a better life "makes no apology for teaching the "error", but it raises discussions about the possibility of "change", linked to factors and different order. We realize how significant it is to observe how speakers of a language are positioned in relation to language teaching which they are not speakers and scholars. Our study showed that certain issues regarding the teaching of the Portuguese language, as is the case of linguistic variation, points are far from being resolved, either for linguists and/or grammarians, whether for language speakers.

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Implementação de um Módulo de Supervisão para um Sistema de Detecção de Vazamentos em Dutos de Petróleo

The transport of fluids through pipes is used in the oil industry, being the pipelines an important link in the logistics flow of fluids. However, the pipelines suffer deterioration in their walls caused by several factors which may cause loss of fluids to the environment, justifying the investment in techniques and methods of leak detection to minimize fluid loss and environmental damage. This work presents the development of a supervisory module in order to inform to the operator the leakage in the pipeline monitored in the shortest time possible, in order that the operator log procedure that entails the end of the leak. This module is a component of a system designed to detect leaks in oil pipelines using sonic technology, wavelets and neural networks. The plant used in the development and testing of the module presented here was the system of tanks of LAMP, and its LAN, as monitoring network. The proposal consists of, basically, two stages. Initially, assess the performance of the communication infrastructure of the supervisory module. Later, simulate leaks so that the DSP sends information to the supervisory performs the calculation of the location of leaks and indicate to which sensor the leak is closer, and using the system of tanks of LAMP, capture the pressure in the pipeline monitored by piezoresistive sensors, this information being processed by the DSP and sent to the supervisory to be presented to the user in real time