9 resultados para TAP
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Canine Visceral Leishmania (CVL) is an important zoonotic disease that has a world wide distribution and has a large impact on public health on the American Continent, especially in Brazil, where the nature of endemic diseases in humans affects a large part of the nation. The influence of the prevalence of CVL in the increased rate of human cases in endemic areas and in the unleashing of epidemic outbreaks shows the need for a more profound understanding, that would generate significant advances in the current measures used to control the reservoirs of sickness that are practiced by the Programa Nacional de Vigilância e Controle da Leishmaniose Visceral. The present work describes and compares the clinical-laboratorial and histopathological findings of twenty-three dogs that were naturally infected by Leishmania chagasi, from endemic areas in metropolitan Natal, Rio Grande do Norte, Brazil. These animals, that were selected and given physical and serological exams (IFI and ELISA rK-39), were classified according to the degree of clinical severity and had blood samples drawn (whole blood and serum) for a complete hemogram and a coagulogram to be done as well as biochemical tests for kidney and liver function. The confirmation of infection by L. chagasi was done after the euthanasia of the animals, through the direct demonstration of the parasite in the impression of the spleen and liver crowned with GIEMSA and through a cultivation by means of NNN/Schneider. According to the clinical evaluation, the animals were classified as asymptomatic (7), oligosymptomatic (7) and polysymptomatic (9). Among the animals that were chosen to be autopsied, there were 2 asymptomatic, 3 oligosymptomatic and 3 polysymptomatic, for the purpose of studying their histopathology, having collected fragments of the spleen, liver, kidneys and skin and were fixed in 10% tamponed formol. The comparison between the average parameters of the clinical-laboratory tested animals in the groups was done through the Student t test (a<0.05). The main clinical signals observed were lymphadenomegaly, alopecy, dermatitis, exfoliation, cutaneous ulcers, onicogriphosis and emaciation. The main clinical-laboratorial alterations established, mainly in the polysymptomatic group, were anemia, hyperproteinemia, hyperglobulinemia, alterations in the albumin/globulin ratio and increased ALT activity. Renal alterations were not verified (urea and creatinine levels were normal). Thrombocytopenia was observed in three clinical groups. However, the other indicators of coagulation function (TAP and TTPA) did not have abnormal variations. There were inflammatory infiltrations and leishmania amastigotes in the skin of polysymptomatic dogs, however, they were not found in the skin of asymptomatic animals. Hypertrophy and hyperplasia of the phagocyte mononuclear system, leishmania amastigote parasites were found in the macrophages, extramedullary hematopoiesis and degenerative alterations were detected in the spleen and liver of 8 of the animals submitted to histopathological exams. In accord with these results, it was demonstrated that the expected alterations in the hematological and biochemical parameters in function of their viscerotropic nature of CVL are mainly observed in the more advanced stages of the disease. The absence of inflammatory infiltration and parasite load in the skin suggest that infected animals without symptoms may have an importance irrelevant to the infectiousness of the vector
Resumo:
Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry
Resumo:
In machining of internal threads, dedicated tools, known as taps, are needed for each profile type, diameter, and low cutting speed values are used when compared to main machining processes. This restriction in the cutting speed is associated with the difficulty of synchronizing the tool s rotation speed and feed velocity in the process. This fact restricts the flexibility and makes machining lead times longer when manufacturing of components with threads is required. An alternative to the constraints imposed by the tap is the thread milling with helical interpolation technique. The technique is the fusion of two movements: rotation and helical interpolation. The tools may have different configurations: a single edge or multiple edges (axial, radial or both). However, thread milling with helical interpolation technique is relatively new and there are limited studies on the subject, a fact which promotes challenges to its wide application in the manufacturing shop floor. The objective of this research is determine the performance of different types of tools in the thread milling with helical interpolation technique using hardened steel workpieces. In this sense, four tool configurations were used for threading milling in AISI 4340 quenched and tempered steel (40 HRC). The results showed that climb cut promoted a greater number of machined threads, regardless of tool configuration. The upcut milling causes chippings in cutting edge, while the climb cutting promotes abrasive wear. Another important point is that increase in hole diameter by tool diameter ratio increases tool lifetime
Resumo:
During the storage of oil, sludge is formed in the bottoms of tanks, due to decantation, since the sludge is composed of a large quantity of oil (heavy petroleum fractions), water and solids. The oil sludge is a complex viscous mixture which is considered as a hazardous waste. It is then necessary to develop methods and technologies that optimize the cleaning process, oil extraction and applications in industry. Therefore, this study aimed to determine the composition of the oil sludge, to obtain and characterize microemulsion systems (MES), and to study their applications in the treatment of sludge. In this context, the Soxhlet extraction of crude oil sludge and aged sludge was carried out, and allowing to quantify the oil (43.9 % and 84.7 % - 13 ºAPI), water (38.7 % and 9.15 %) and solid (17.3 % and 6.15 %) contents, respectively. The residues were characterized using the techniques of X-ray fluorescence (XRF), Xray diffraction (XRD) and transmission Infrared (FT-IR). The XRF technique determined the presence of iron and sulfur in higher proportions, confirming by XRD the presence of the following minerals: Pyrite (FeS2), Pyrrhotite (FeS) and Magnetite (Fe3O4). The FT-IR showed the presence of heavy oil fractions. In parallel, twelve MES were prepared, combining the following constituents: two nonionic surfactants (Unitol L90 and Renex 110 - S), three cosurfactants (butanol, sec-butanol and isoamyl alcohol - C), three aqueous phase (tap water - ADT, acidic solution 6 % HCl, and saline solution - 3.5 % NaCl - AP) and an oil phase (kerosene - OP). From the obtained systems, a common point was chosen belonging to the microemulsion region (25 % [C+S] 5 % OP and AP 70 %), which was characterized at room temperature (25°C) by viscosity (Haake Rheometer Mars), particle diameter (Zeta Plus) and thermal stability. Mixtures with this composition were applied to oil sludge solubilization under agitation at a ratio of 1:4, by varying time and temperature. The efficiencies of solubilization were obtained excluding the solids, which ranged between 73.5 % and 95 %. Thus, two particular systems were selected for use in storage tanks, with efficiencies of oil sludge solubilization over 90 %, which proved the effectiveness of the MES. The factorial design delimited within the domain showed how the MES constituents affect the solubilization of aged oil sludge, as predictive models. The MES A was chosen as the best system, which solubilized a high amount of aged crude oil sludge (~ 151.7 g / L per MES)
Resumo:
This thesis aims to advance in the geological knowledge of the region comprising the Piancó-Alto Brígida (TPAB) and Alto pajeú (TAP) terranes, in the Transversal Zone Domain (Borborema Province, NE Brazil), with the main objective of understanding the geodynamic evolution and the structural framework of these units. To reach this objective, and besides field work and interpretation of traditional aerial photographs, other tools were employed like of remote sensing products (Landsat 7 ETM+, aeroradiometrics, aeromagnetics and topographical images), lithogeochemical (whole rock) analyses and geochronological dating (U-Pb in zircon), besides integration with literature data. In the area, several precambrian geological units outcrop, represented in the TAP by the paleoproterozoic Serra Talhada and Afogados da Ingazeira complexes, Riacho Gravatá Complex (metavolcano-sedimentary sequence of Stenian-Tonian age) and Cariris Velhos orthogneisses (of Tonian age). The TPAB comprises the Santana do Garrote (lower unit) and Serra do Olho d'Água (upper unit) formations of the Cachoeirinha Group (Neoproterozoic III), besides the Piancó orthogneisses and Bom Jesus paragneisses; the latter correspond to an older (basement ?) block and a possible high grade equivalent of the Cachoeirinha Group (or Seridó Group ?), respectively. Several Brasiliano-age plutons occur in both terranes.The aeromagnetic data show the continuity, at depth, of the main shear zones mapped in the region. The Patos, Pernambuco, Boqueirão dos Cochos, Serra do Caboclo, Afogados da Ingazeira/Jabitacá and Congo-Cruzeiro do Nordeste shear zones reach depths greater than to 6-16 km. The aeromagnetic signature of other shear zones, like the Juru one, suggests that these structures correspond to shallower crustal features. The satellite images (Landsat 7 ETM+) and aerogamaspectrometric images discriminate different geological units, contributing to the mapping of the structural framework of the region. The Serra do Caboclo Shear Zone was characterized as the boundary/suture between the TPAB and TAP. This structure is an outstanding, pervasive feature that separates contrasting geological units, such as the Neoproterozoic III Cachoeirinha Group in the TPAB and the Riacho Gravatá Complex and the Cariris Velhos metaplutonics, of Stenian-Tonian age, in the TAP. Occupying different blocks, these units are not found in authoctonous relations, like unconformities and intrusive contacts. Concerning the Cariris Velhos (ca. 1,0 Ga old) event is recorded by radiometric ages of the Riacho Gravatá Complex metavolcanics and intrusive augen and orthogneisses, all of them displaying geochemical affinities of arc or collisional settings. A structural signature of this event was not recorded in the region, possibly due to its low grade/low strain style, obliterated by the overprinting of younger, higher grade/high strain Brasiliano-age fabrics.The first tectonic event (D1) observed in the Cariris Velhos lithotypes presents contractional kinematics with transport to the NW. Neoproterozoic III geochronologic dates, obtained in late-D1 granitoids, imply a Brasiliano age (ca. 610-600 Ma) for this deformation event. The second tectonic event (D2) characterized in the region corresponds to the Brasiliano transcurrent kinematics of the outstanding shear zones and associated granitoid plutons. The geochronological (U-Pb in zircon) data obtained during this thesis also confirms the occurrence of the Cariris Velhos magmatic suite in the TAP, as well as the Neoproterozoic III age to the Cachoeirinha Group in the TPAB. The TAP (Riacho Gravatá Complex, augen and orthogneisses) is interpreted as a continental arc possibly accreted to a microcontinent during the Cariris Velhos (Stenian-Tonian) event. Later on, this terrane collided with the TPAB at the beginning of the Brasiliano orogeny (D1 contractional deformation), and both domins were reworked by the transcurrent shear deformation of the D2 event
Resumo:
The pericarp of Passiflora edulis var. flavicarpa Degener is now being investigated for medicine purposes. There are no reports about it toxicity. The aim of the present study was investigate the sub chronic toxicity in male rats and reproductive toxicity in pregnant rats and exposed fetuses of an extract obtained by infusion of the pericarp in water (1:3 m/v;100o C, 10 min). The extract composition was evaluated by tube reactions and thin lawyer chromatography (TLC). Adult male rats (n=8) were treated with 300 mg/kg of the extract, by gavage, during 30 days and pregnant rats (n=7) from gestation day 0 to day 20. Control received tap water (1 mL). Water and food intakes and body weight gain were recorded. At day 29 of treatment the sexual behavior of the males was analyzed and then half of males from each group received cyclophosphamide (50 mg/kg, i.p.) to (anti)genotoxic assessment in bone marrow. At day 30, males were anesthesized for parameters collection. At day 20 of gestation, the dams were anesthesized for reproductive performance evaluation. The fetal analysis was conducted by visceral and skeletal. Phytochemical analysis revealed the presence of flavonoids, unspecific alkaloids, phenols and triterpenic compounds. Statistical analysis revealed absence of significant differences between experimental and control. This study suggest that the aqueous extract obtained from pericarp of P. edulis var. flavicarpa Degener was not able to promote toxic effects in rats. Cytotoxicity was evaluated with the PCE/NCE ratio (NCE=normochromatic erythrocytes). Statistical analysis (mean ± SEM) revealed absence of changes in the frequency of MNPCE (negative control: 3.26±0.42; positive control: 11.72±1.02; negative experimental: 4.02±0.13; positive experimental: 10.47±0.87) or cytotoxicity (negative control: 0.37±0.08; positive control: 0.23±0.05; negative experimental: 0.37±0.07; positive experimental: 0.23±0.02). This study suggests that the extracts showed no (anti)genotoxic and no cytotoxic activities under the experimental conditions.
Resumo:
Chronic Hepatitis C is the leading cause of chronic liver disease in advanced final stage of hepatocellular carcinoma (HCC) and of death related to liver disease. Evolves progressively in time 20-30 years. Evolutionary rates vary depending on factors virus, host and behavior. This study evaluated the impact of hepatitis C on the lives of patients treated at a referral service in Hepatology of the University Hospital Onofre Lopes - Liver Study Group - from May 1995 to December 2013. A retrospective evaluation was performed on 10,304 records, in order to build a cohort of patients with hepatitis C, in which all individuals had their diagnosis confirmed by gold standard molecular biological test. Data were obtained directly from patient charts and recorded in an Excel spreadsheet, previously built, following an elaborate encoding with the study variables, which constitute individual data and prognostic factors defined in the literature in the progression of chronic hepatitis C. The Research Ethics Committee approved the project. The results were statistically analyzed with the Chi-square test and Fisher's exact used to verify the association between variable for the multivariate analysis, we used the Binomial Logistic regression method. For both tests, it was assumed significance p < 0.05 and 95%. The results showed that the prevalence of chronic hepatitis C in NEF was 4.96 %. The prevalence of cirrhosis due to hepatitis C was 13.7%. The prevalence of diabetes in patients with Hepatitis C was 8.78 % and diabetes in cirrhotic patients with hepatitis C 38.0 %. The prevalence of HCC was 5.45%. The clinical follow-up discontinuation rates were 67.5 %. The mortality in confirmed cases without cirrhosis was 4.10% and 32.1% in cirrhotic patients. The factors associated with the development of cirrhosis were genotype 1 (p = 0.0015) and bilirubin > 1.3 mg % (p = 0.0017). Factors associated with mortality were age over 35 years, abandon treatment, diabetes, insulin use, AST> 60 IU, ALT> 60 IU, high total bilirubin, extended TAP, INR high, low albumin, treatment withdrawal, cirrhosis and hepatocarcinoma. The occurrence of diabetes mellitus increased mortality of patients with hepatitis C in 6 times. Variables associated with the diagnosis of cirrhosis by us were blood donor (odds ratio 0.24, p = 0.044) and professional athlete (odds ratio 0.18, p = 0.35). It is reasonable to consider a revaluation in screening models for CHC currently proposed. The condition of cirrhosis and diabetes modifies the clinical course of patients with chronical hepatitis C, making it a disease more mortality. However, being a blood donor or professional athlete is a protective factor that reduces the risk of cirrhosis, independent of alcohol consumption. Public policies to better efficient access, hosting and resolution are needed for this population.
Resumo:
Canine Visceral Leishmania (CVL) is an important zoonotic disease that has a world wide distribution and has a large impact on public health on the American Continent, especially in Brazil, where the nature of endemic diseases in humans affects a large part of the nation. The influence of the prevalence of CVL in the increased rate of human cases in endemic areas and in the unleashing of epidemic outbreaks shows the need for a more profound understanding, that would generate significant advances in the current measures used to control the reservoirs of sickness that are practiced by the Programa Nacional de Vigilância e Controle da Leishmaniose Visceral. The present work describes and compares the clinical-laboratorial and histopathological findings of twenty-three dogs that were naturally infected by Leishmania chagasi, from endemic areas in metropolitan Natal, Rio Grande do Norte, Brazil. These animals, that were selected and given physical and serological exams (IFI and ELISA rK-39), were classified according to the degree of clinical severity and had blood samples drawn (whole blood and serum) for a complete hemogram and a coagulogram to be done as well as biochemical tests for kidney and liver function. The confirmation of infection by L. chagasi was done after the euthanasia of the animals, through the direct demonstration of the parasite in the impression of the spleen and liver crowned with GIEMSA and through a cultivation by means of NNN/Schneider. According to the clinical evaluation, the animals were classified as asymptomatic (7), oligosymptomatic (7) and polysymptomatic (9). Among the animals that were chosen to be autopsied, there were 2 asymptomatic, 3 oligosymptomatic and 3 polysymptomatic, for the purpose of studying their histopathology, having collected fragments of the spleen, liver, kidneys and skin and were fixed in 10% tamponed formol. The comparison between the average parameters of the clinical-laboratory tested animals in the groups was done through the Student t test (a<0.05). The main clinical signals observed were lymphadenomegaly, alopecy, dermatitis, exfoliation, cutaneous ulcers, onicogriphosis and emaciation. The main clinical-laboratorial alterations established, mainly in the polysymptomatic group, were anemia, hyperproteinemia, hyperglobulinemia, alterations in the albumin/globulin ratio and increased ALT activity. Renal alterations were not verified (urea and creatinine levels were normal). Thrombocytopenia was observed in three clinical groups. However, the other indicators of coagulation function (TAP and TTPA) did not have abnormal variations. There were inflammatory infiltrations and leishmania amastigotes in the skin of polysymptomatic dogs, however, they were not found in the skin of asymptomatic animals. Hypertrophy and hyperplasia of the phagocyte mononuclear system, leishmania amastigote parasites were found in the macrophages, extramedullary hematopoiesis and degenerative alterations were detected in the spleen and liver of 8 of the animals submitted to histopathological exams. In accord with these results, it was demonstrated that the expected alterations in the hematological and biochemical parameters in function of their viscerotropic nature of CVL are mainly observed in the more advanced stages of the disease. The absence of inflammatory infiltration and parasite load in the skin suggest that infected animals without symptoms may have an importance irrelevant to the infectiousness of the vector
Resumo:
Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry
