Caracterização de superfícies de titânio modificado por oxidação à plasma

Recent years have seen a significant growth in surface modifications in titanium implants, resulting in shorter healing times in regions with low bone density. Among the different techniques, subtraction by chemical agents to increase oxidation has been applied for surface treatment of dental implants. However, this technique is generally unable to remove undesirable oxides, formed spontaneously during machining of titanium parts, raising costs due to additional decontamination stages. In order to solve this problem, the present study used plasma as an energy source to both remove these oxides and oxidize the titanium surface. In this respect, Ti disks were treated by hollow cathode discharge, using a variable DC power supply and vacuum system. Samples were previously submitted to a cleaning process using an atmosphere of Ar, H2 and a mixture of both, for 20 and 60 min. The most efficient cleaning condition was used for oxidation in a mixture of argon (60%) and oxygen (40%) until reaching a pressure of 2.2 mbar for 60 min at 500°C. Surfaces were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), adhesion and cell proliferation. SEM showed less cell spreading and a larger number of projections orfilopodia in the treated samples compared to the control sample. AFM revealed surface defects in the treated samples, with varied geometry between peaks and valleys. Biological assays showed no significant difference in cell adhesion between treated surfaces and the control. With respect to cell proliferation, the treated surface exhibited improved performance when compared to the control sample. We concluded that the process was efficient in removing primary oxides as well as in oxidizing titanium surfaces

A expansão da agroindústria do mel no Rio Grande do Norte

The beekeeping activity has become in all regions of Brazil until the early 80s and from 2000 to beekeeping Northeast also has developed, becoming a major oil producing honey. The Rio Grande do Norte following these developments happened to occupy fourth place in the ranking of export of honey between the states of the Northeast in 2007. Therefore, the aim of this paper is to present a macro radiography of recent developments in the production chain of honey in the state of Rio Grande do Norte, organizing and discussing the information, collected in the period 2004 to 2007, as well as evaluating the prospect of the honey industry in order to provide a diagnosis able to identify opportunities and enhance the marketing of their products. From the methodological point of view, this study can be classified as a research study exploratory and descriptive by using questionnaires. The group of several studies has been productivity, production and market. Search results indicated the growth of industry in 4 years of activity by the number of beehives full and populated, infrastructure, production and marketing of the state. It can be said that beekeeping of Rio Grande do Norte, despite its potential for developing the activity comes in a different way when compared to other activities, because the actors who play to start the activity through training and to play with it in a professional manner, in addition to support staff who work in the industry

As quatro operações básicas: uma compreensão dos procedimentos algorítmicos

The current research had as main objective to analyze the possibility of knowledge elaboration/re-elaboration about ideas and algorithmic procedures related to basic operations by pupils of the 6th degree fundamental teaching in a significant learning process. This way the study had as basis a methodological intervention developed in a 6th degree class of a Fundamental Teaching Municipal School in the city of João Pessoa, PB. The research had as central steps the application of pre-tests (1 and 2); the execution of semi-structured interviews with the pupils involved in the theme deep studies; the elaboration and development of teaching activities, having as referential the significant learning and the application of a pre-test. The data collected in the pre-tests (1 and 2) showed a low level of the pupils comprehension about the contents related to the four operations. The answers to the post-test questions were analyzed mainly from the qualitative point of view based on the mathematic concepts comprehension theory proposed by Skemp (1980) having as complementary subsidy data collected through interviews. The analysis of the results obtained in the post-test showed that the major part of pupils reached a relational comprehension about the ideas and algorithmic procedures related to addition, subtraction, multiplication, and division. Such results showed us that the application of a teaching methodology that privileges the content comprehension, considering the pupils previous knowledge and the reflection about the action along the activities proposed, made possible the elaboration or re-elaboration of knowledge by pupils regarding to contents adopted as theme for our research

Formação continuada de professores que ensinam matemática: o papel do ábaco na ressignificação da prática pedagógica

The present dissertation performs a study about abacus part on the continuous education of Elementary School s Mathematic teachers on what concerns the basic operations of addition and subtraction with (re)unification by using the manipulative and/or informatical abacus. Therefore, the research intends to answer the following question: How does a teacher reframe the pedagogical practice while teaching the Decimal Numeral System and the conventional operations of addition and subtraction with (re)unification through manipulative and informatical abacus? In order to do so, we rely ourselves on the Guy Brousseau s Theory of Didactic Situations (TDS) from 1996 that affirms the necessity to trace a way in accordance with the teaching situations that lead the student s learning; and on the work of Pierre Lévy (1993), in which the poles of communication oral, written and virtual create three ways of communication through which the learning process happens. The methodology of this paper was based on the Strategic Research-Action of Franco (2005). The didactic sequence was elaborated in accordance with TDS and used the manipulative and informatical abacus as didactic resource. With the application of the didactic sequence, it was verified that the continued formation of Elementary School s teachers concerning the operations of addition and subtraction on the initial years/levels is pertinent once it has been observed some difficulties of the teachers concerning this mathematical subject. Besides, the analysis of the didactic sequence has allowed one to realize that teachers had some difficulties concerning the numeric representation with order zero, the resolution of operations of addition and subtraction using the manipulative and informatical abacus and the realization of (re)unification on the subtraction with meaning. These observations has been discussed with the teachers and, after that, it has been done some didactic-methodological routings of the operations of addition and subtraction with re(unification) that contributes with the teaching and learning process.

Propriedades dos sistemas de numeração: uma sequência didática em uma abordagem histórica

This paper aims to describe the construction and validation of a notebook of activities whose content is a didactic sequence that makes use of the study of ancient numbering systems as compared to the object of our decimal positional numbering system Arabic. This is on the assumption that the comparison with a system different from our own might provide a better understanding of our own numbering system, but also help in the process of arithmetic operations of addition, subtraction and multiplication, since it will force us to think in ways that are not routinely object of our attention. The systems covered in the study were the Egyptian hieroglyphic system of numbering, the numbering system Greek alphabet and Roman numbering system, always compared to our numbering system. The following teachung is presented structured in the form of our activities, so-called exercise set and common tasks around a former same numbering system. In its final stage of preparation, the sequence with the participation of 26 primary school teachers of basic education

Prospecção e caracterização de genes associados ao processo de indução floral em cana-de-açúcar

The northeastern region is responsible to 14.32% of sugarcane national production. This lowered contribution is due to edaphoclimatic condition. Flowering is a vital process to plant which consumes lots of energy and it culminates in a process called isoporization. This one can give in a decreasing of 60% on alcohol and water production. It may consider that cropped sugarcane has a hibrid with octaploid genome, there are varieties with a flowering standard until of non flowering. Using this natural genetic potential on different croppings of sugarcane, the aim of this work was to understand as this process occurs by the usage of subtractive approaches. The total RNA was extracted using Trizol of peaks of merisematics of croppings with induced flowering and other with late flowering. From this total RNA were built four subtractives libraries (B1- induced early flowering subtracted on late flowering not induced; B2- late flowering not induced subtracted induced early flowering; B3- induced early flowering subtracted of not induced early flowering; B02- not induced early flowering subtracted from induced early flowering) using kits Super Smart cDNA synthesis and BD Clontech kit select cDNA subtraction (Clontech). This material was clone don vector pGEM T-easy(Promega) and changed in competent cells of E.coli DH10B. Given analysis sequence was carried out a program BLASTn against database of NCBI and genome of Arabidopsis thaliana, rice and maize. Clones were grouped in 9 different classes according to function. Some factors already related as couples of flower induction were identified at different libraries. And grouped proteins with cell cycle and it controls were presents, mainly kinases proteins. Related factors to proteic sinthesis, metabolism, defence, cell communication were also given in both libraries .Some identified genes did not show similarity on database or homology with hypothesis function, and it can represents new genes to be deposited in international database. These results offers that some identified on sugarcane, classified as on factors classes, cell cycle and cell communication, trough unknown genes, can be linked with genetic changing to the flowering process found in the northeastern region

Avaliação da eficiência da técnica de obturação pela compressão hidrùlica vertical após instrumentação automatizada

The purpose of this study was to evaluate through radiographic and microscopic analysis the efficiency of the filling techniques by vertical hidraulic compression after the root canal mechanical instrumentation in vitro as well to evaluate the marginal apical leakage through macroscopic and microscopic analysis. Thirty human mandibular molars were used , they were divided on three groups, these were subdivided on six subgroups with five specimens each, come down to 106 root canals filled. Initially, the teeth were instrumented with Profile system series 29 and filled with two ways: single accessory cone or single cone associated with gutta-percha secundary cone, with Fill Canal sealer or Sealer 26. Completed the filling, the teeth were coated with araldit and finger -nail polish except for the apical 2 mm and dried for 3 hours, thep radiographs were taken of the teeth in orto and disto-radiai directions. Next, the coronal seal was carried out with composite resin photopolymerized and with their process of making impermeable. Teeth of positive controls were used without araldit and finger-nail polish whereas the negative controls were used with total coat of araldit and finger-nail polish. The specimens were placed in 2% Methylene Blue dye for 24 hours and thermocycled for 7 days. Afterwards, sections were made of each tooth at mesial and distal roat, after this the teeth were radiographed at buccolíngual direction for a macroscopic analysis and at buccolingual and mesiodistal directions for assessment of the marginal apical leakage. Cross sections were made 3 mm to 3mm since the tooth apice. The sections obtained for each group were observed with a stereomicroscope to evaluate the quality of the root canal filling and the marginal apical leakage. The results showed that: In the four techniques the marginal dye leakage was present in the apical third; in all groups the quality of the root canal filling in the radiography was better at mesial root canal and the single cone technique showed inefficient when only a single distal root canal was present. In the radiographic evaluation the best quality of the root canal filling was observed in the 1A group (single accessory cone + FiIl Canal), as in the mesial root as in the distal root wich Shcwed twe root canals: when the distaI root had only one canal. the best result was showed by 28 group (single accessory cone associated with secundary cone + Fill Canal) In the macroscopic analysis of longitudinal !eaKage (outside surface). less leakage was showed as In the mesial root as in the distal root in the negative control group (3) followed 2A group (single accessory cone + Sealer 26). When the microscopic analysis of tranversal leakage of both roots (inside surface) was carried out. the groups that showed less dye leakage were the negative control (38) followed the 28 group (single acessory cone associated with secundary cone + Sealer 26). The homogeneity o filling was best noted in the 1 A group (.single accessoty cone + Fill Canal). The groups that showed less dye penetration in the tranversal leakage (total area) were negative control (3B) and 2B

Localização de faltas em linhas de transmissão usando morfologia matemática

This work an algorithm for fault location is proposed. It contains the following functions: fault detection, fault classification and fault location. Mathematical Morphology is used to process currents obtained in the monitored terminals. Unlike Fourier and Wavelet transforms that are usually applied to fault location, the Mathematical Morphology is a non-linear operation that uses only basic operation (sum, subtraction, maximum and minimum). Thus, Mathematical Morphology is computationally very efficient. For detection and classification functions, the Morphological Wavelet was used. On fault location module the Multiresolution Morphological Gradient was used to detect the traveling waves and their polarities. Hence, recorded the arrival in the two first traveling waves incident at the measured terminal and knowing the velocity of propagation, pinpoint the fault location can be estimated. The algorithm was applied in a 440 kV power transmission system, simulated on ATP. Several fault conditions where studied and the following parameters were evaluated: fault location, fault type, fault resistance, fault inception angle, noise level and sampling rate. The results show that the application of Mathematical Morphology in faults location is very promising