Formação em odontologia: um estudo sobre as clínicas integradas em cursos do Brasil

Dental education is going through important changes in preparing workers to meet the needs of the society and the labor market. For that reason, we studied the offering of comprehensive dental care clinics in Brazil with the aim of encouraging future curriculum changes focused on the training of general dental practitioners. An email questionnaire on educational organization and comprehensive care clinics of undergraduate programs was sent to each academic dental affairs dean. Sixty-seven (41.6%) dental schools agreed to participate. We observed that curriculum changes have contributed to modify the format of comprehensive care clinics. This was felt mainly (88,1%) with regards to workload and course offerings in different levels of the dental curriculum, thereby creating a favorable environment for generalist training. Most schools shared the following characteristics: clinical procedures were being prioritized according to level of complexity (95,5%), students were having the chance to attend courses in other programs (37,3%), and attempt to diversify teaching methods was being challenged (58,2%). Although progress in combining teaching and clinical services was reported by 83,6% of schools, most clinical procedures were still being performed intramurally (50,7%) in partnership with public service. There was also improvement in clinical mentorship due to the hiring of instructors qualified to work in comprehensive care clinics and with aptitude to supervise a wider range of dental procedures (58,2%). Further changes to Brazilian comprehensive care clinics should hence be encouraged and intensified to ensure appropriate generalist training for dental practitioners

A (bio)ética e a Odontologia: os (des)caminhos de uma formação humana

The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology

Ergonomia e Odontologia: determinantes da postura corporal dos estudantes da clínica-escola de uma Universidade Federal

Posture is one of the most worrying problems dentists face. That is because of the high incidence of low back pathologies regarding the professional activity, despite the development on the field of Dental Ergonomics. This work took place at the dental schoolclinic at a Federal University, and it was grounded on the Ergonomic Principles in the workplace. Its main objective was to analyze the determinants of inadequate posture adopted by students inasmuch as the adoption of non ergonomic methods at the school-clinic may influence them to develop inadequate postures in their working environment. The analysis of the activity showed us that it requires some complex procedures in the patient s mouth. Thus, when the students carry out the activity, they start to adopt, although unconsciously, inadequate postures which will make easier the visual accuracy and the access to the operation focus. In case there is no internal (body awareness) or external warning mechanisms (the professor s or the partner s counseling) regarding posture or possible risks which lead them to self-correction, the students become vulnerable to osteomuscle disorders. The time pressure, because the students are expected to perform their task in a predetermined clinical time. The facts related to each patient s variability as well as the stress caused by the expectations to get their work done in time make the students to advance it believing they will waste time if they help their partners or using an indirect view. We could also notice that there was no assistant to perform the job of minor ones, as well as there was no professor who could actually connect the knowledge on Ergonomics to its working practice. The conclusions of this work stand out the need of widen the discussion at the academic environment regarding health professionals in places such as universities. The ergonomic principles in the workplace aim a multidisciplinary analysis based on the experience of students, professors, staff members and janitors that can contribute to some reflection upon the issue and consequently actions which will bring positive changes at the working environment

Um estudo da aplicação do conceito de risco na conscientização e conhecimento de estudantes de ensino técnico sobre riscos de segurança e saúde ocupacional em laboratório de soldagem

This dissertation presents a discussion on the level of risk awareness of students who have welding practice in the laboratories at CEFET/PI, both in Teresina and Floriano. Its main goal is to investigate risk factors involving students, teachers and employees that work in these laboratories. It s an empirical survey, held among a certain amount of students from the course in Mechanic Technology. For data analysis, the concept of risk was compared to the students direct measure of perception. The main results suggest the students must be better informed, more risk aware and more competent, in order to avoid accidents. They also point to a strong need for a more formal and effective performance to assure full consciousness about the risks involving the welding practice.

Programa de odontologia para bebês: uma avaliação quantitativa e qualitativa

The objective of this study was to evaluate a baby dentistry program which has been in the city of Natal for five years. The research was based on two analysis: a quantitative one, which tried to check caries prevalence in 52 children supported by the program and a qualitative one, which, through interviews carried out with the mothers, using the focus group technique, tried to realize the effect of the program their attitudes related to the care of their children´s oral health. For the quantitative analyses of caries prevalence there was the use of def-s and knutson rates and the values obtained were shown in a descritive and analytical way.The results showed that 4.2% of babies ranging 24 to 36 months old presented carie disease. Children from 36 to 48 months old and above 48 months old presented 18.2% and 16.7% carie prevalence respectively.The def-s averages found in ages 24 to 36, 36 to 48 and 48 to 60 months old were 0.08; 0.40 and 1.16 respectively, considered as being equally low, going along with Knutson rates. The qualitative analyses showed a high level of the mothers` satisfaction, considering the access,practitioner-patient relationship and opportunity to keep the oral health. Children supported by the program showed a low carie prevalence and the program turned out to be effective under the mothers` point of view

Projetos políticos pedagógicos dos cursos de Odontologia do RN : formação profissional e a perspectiva da atenção à terceira idade

Brazil has been undergoing major demographic change.According to IBGE, the next 20 years the country's elderly population may reach over 30 million people. This tariff provides specifics regarding the process of health / disease. It is essential that higher education institutions are committed to this demand in view of the integrated training of health needs of society. The aim of this study is to analyze the Pedagogical Political Projects (PPP) of courses in dentistry in Rio Grande do Norte (RN), according to the national curriculum guidelines (DCNS) and training from the perspective of health care for the elderly. This is an exploratory study with a qualitative approach: with records and interviews. The study subjects were an Assistant Professor in the development of PPPs for each institution. The scenario in this study were dental training institutions in the newborns. Initially, the analysis of the PPP was by using the Alceste 4.9 software. The interpretation of the contents of interviews with teachers was done through content analysis of Bardin (2010). The PPPs are based on the DCNS, meet the characteristics of regional and seek a generalist, but still strongly directed to technical and scientific aspects of professional practice. Efforts and institutional approaches, involving teachers and students of the courses are being mobilized for training with more articulated network of health services. However, the emphasis on content pertaining to the health care of the elderly, is still limited when compared to those targeted content inherent in children and adolescents in all three curricular structures. It is reasonable to conclude that the historical, political, scientific, cultural and social, present in society, influence the formation of the dental professional RN. The greater participation of society in the process of vocational training in dentistry is needed. This can be done from the involvement of universities with health councils, bodies representing the dental profession and other segments of civil society in order to induce changes that generate ideas and educational practices integrative and interdisciplinary, with emphasis on continuing education for teachers, servants, employees and students. Containing conduct this process inherent flexibility of curriculum, teaching-service integration and coordination abilities and professional skills that are essential to understanding the human being and its complexities

Bioética e odontologia: um perfil dos problemas éticos vividos por cirurgiões-dentistas

Bioethics studies human behavior in the fields ofbiological sciences and health care. Tt strives for humanization in health services along with promoting the rights of patients. In view of the lack of dental research dealing with this topic, the present study was undertaken to identify, from the viewpoint of dental surgeons, ethical problems experienced in dental practice,understand how they occur and how professionals deal with them. It is a descriptive exploratory investigation within a qualitative approach. Empirical material was collected through semi-structured interviews performed with 15 dental surgeons who work both in private and public practice in the state of Rio Grande do Norte, Brazil. The content of the interviews was systemized and organized, resulting in the identification of topics, from which were grouped the ethical problems reported by the participants. The resu1ts indicate that many of the ethical problems coincide with infringements of the norms and mIes of the Dental Code of Ethics, confirming a dental ethic acquired during professional formation and therefore, inadequate for solving the problems that emerge in professional practice. Other questions stand out such as low salaries, competition and poor working conditions. Associated to these problems are lack of commitment and professional responsibility with the patients. Concem with maintaining user autonomy, guaranteeing access to specialized services, and the need for performing only procedures for which they are technically qualified arise in the responses, leading to difficulties in consolidating the principIes proclaimed by bioethics: autonomy, justice, nonmaleficence and beneficence. We concluded that the ethical problems identified in professional practice need to be understood beyond the dental dimension, towards a human approach. It is therefore necessary to incorporate health care management technologies into health practices, including dentistry, which implies recognizing the difTerent dimensions that surround individuaIs, that is, social, economic, political and cultural

Condição peri-implantar e fatores associados às doenças peri-implantares em pacientes reabilitados no serviço odontológico da faculdade de odontologia da UFRN

A introdução dos implantes dentários osseointegrados como uma ferramenta na reabilitação oral de pacientes edêntulos e parcialmente edêntulos é uma realidade no cotidiano do cirurgião-dentista. Estudos reportam uma alta taxa de sucesso da utilização de implantes no tratamento reabilitador. Entretanto, outras investigações têm mostrado a perda desses implantes devido a infecções peri-implantares, como a mucosite e a peri-implantite. O objetivo deste trabalho foi avaliar a frequência das doenças peri-implantares e seus fatores associados em pacientes com implantes dentais em função reabilitados no serviço odontológico da Faculdade de Odontologia da UFRN. Foram examinados 155 indivíduos portadores de 523 implantes e 2718 dentes. Dentes e implantes foram avaliados por meio de sondagem periodontal, observando-se a profundidade de sondagem, retração gengival, bem como foram avaliados índices de placa visível (IPV) e sangramento gengival (ISG) e presença de supuração. Os dados foram armazenados em fichas clínicas e avaliados estatisticamente por meio da estatística descritiva e inferencial. A idade média dos pacientes foi de 54,05 (± 12,61) anos, sendo 79,4% do sexo feminino. As frequências da mucosite, peri-implantite e periodontite em indivíduos foram 54%, 28% e 50%, respectivamente. Dos 523 implantes avaliados, 43% tinham mucosite, 14% peri-implantite e 43% saúde. Os testes Qui-quadrado de Pearson e Exato de Fisher mostraram que as doenças peri-implantares estão associadas as doenças periodontais, uso de medicação, alterações sistêmicas número de implantes, IPV, ISG, ao tempo de função das próteses, região do implante, número de roscas expostas e faixa de mucosa queratinizada (p<0,05). A análise de regressão múltipla, através da regressão binária logística, constatou que indivíduos que faziam uso de medicação (OR = 1,784), com um ISG > 10% (OR = 1,742), com implantes instalados na maxila (OR = 2,654), onde a prótese sobre o implante tinham mais de 2 anos em função (OR = 3,144) e que radiograficamente apresentavam uma perda óssea atingindo a terceira rosca do implante (OR = 4,701) mostram uma associação positiva com as doenças peri-implantares de maneira que esses indivíduos têm mais chances de ter essas doenças. Os resultados sugerem que a frequência das doenças peri-implantares na população em estudo foi de 82% dos pacientes e que estas doenças estão associadas a fatores relacionados aos indivíduos como: a presença da doença periodontal, piores IPV e IS, alterações sistêmicas, uso de medicação e maior número de implantes; e a fatores locais relacionados aos implantes como: ausência ou faixa de mucosa menor que 2mm, implantes na maxila e na região anterior, perda óssea atingindo a terceira rosca do implante e a um tempo de reabilitação prótetica maior que 2 anos

Prevalência da disfunção temporomandibular em estudantes de odontologia por meio de diferentes índices

The epidemiology of temporomandibular disorders varies widely in the literature. The aim of this study was to determine the prevalence of TMD in dental students of the Federal University of Rio Grande do Norte assessed by different indexes. The sample consisted of 101 individuals selected by a randomized process, whose general outline was systematic sampling. For evaluation of the signs and symptoms of TMD, an anamnestic index, Fonseca s protocol, and two clinical indexes, the RDC/TMD (Research Diagnostic Criteria for Temporomandibular Disorders), or standard index, and the Helkimo s Clinical Dysfunction Index were applied. Data were analyzed using the chi-square test and kappa, besides verifying the sensitivity and specificity (5% significance). The diagnosis of TMD by different indexes showed a variation in the prevalence between 72.3% (Helkimo s Clinical index), 64.4% (Fonseca s anamnestic index) and 35.6% (RDC/TMD). There was no statistical difference between the sexes for the RDC/TMD, although this difference was found for Fonseca s and Helkimo s indexes (p<0.05). The most frequent type of TMD were joint disorders (Groups II and III), and the subtypes disc displacement with reduction (17.8%) and arthralgia (15.8%). Most individuals showed a mild TMD (45.5%) for both indexes, Fonseca and Helkimo. When comparing the types of diagnoses, RDC/TMD with Fonseca and Helkimo, low agreement was found (k=0.17 and k= 0.35, respectively). A moderate correlation between the severity of TMD was obtained (kw= 0.53) for Fonseca s protocol and Helkimo s index. High sensitivity and low specificity were seen for both diagnoses compared to standard, resulting in excessive false positives. Within the limitations of the study, it was concluded that the prevalence of TMD can vary widely, depending on the index used for its diagnosis

Projeto pedagógico: abordagens e implicações no âmbito da formação em odontologia

Proposals that aim a redirection of current health attention models in Brazil are indispensible due to the need of health issues and its challenges imposed by society. These issues come forth in Higher Education Institutions in an attempt to devise ways to face these demands. The research aims to analyze the Pedagogical Project (PP) present in the Dentistry Graduation Course in the Federal University of Rio Grande do Norte in Brazil-(UFRN). This is done in coherence the Brazilian National Curricular Guidelines considering main competences established in the PP. This research was approved by the Ethics Committee at UFRN under document number 285/201. The work is of descriptive nature and was realized with 30 students in the Dentistry Graduation Course. Interviews were realized with the use of problem situation approach. The research was also supported by documental studies that dealt with syllabus present in the disciplines taught at UFRN. Data were processed with the use of the ALCESTE 4.9 software. It is possible to acknowledge that some conservative conceptions arise, even though there is use of active methodologies and innovation that aim to promote reflection and articulation for general competence development such as proposed in the Pedagogical Project in Dentistry Graduation Course at UFRN. These conceptions are mainly present in the teaching-learning process where students do not have full participation. Thus it is possible to conclude that even though there are advances and breakthroughs. This is seen with that fact that there was inclusion of multidisciplinary clinical work as well optional courses in the curriculum. It was also seen that there was occasional use of active teaching methodologies in Dentistry at UFRN. But there is still a need for a didactical and methodological resizing. These actions require the need for progressive development of competences and abilities during the formative process according to what was established in the Brazilian National Curricular Guidelines

Bolton freeware: aplicativo de avaliação de discrepância de massa dentária desenvolvido pelo programa de pós-graduação em odontologia/UFRN

The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software

Conhecimento sobre ergonomia no âmbito acadêmico: um estudo com alunos e professores de odontologia

OBJETIVO: As doenças osteomusculares são as afecções ocupacionais mais prevalentes em cirurgiões-dentistas. Nosso propósito: 1) investigar os conhecimentos, aplicabilidades clínicas dos princípios ergonômicos em discentes e docentes em atividades clínicas de uma universidade pública 2) pesquisar a incidência de sintomatologias dolorosas no pescoço, ombros, parte superior e inferior das costas, cotovelos, quadris, coxas, joelhos, tornozelos e pés no universo de alunos em estágios clínicos. 3) incitar discussões de normas e diretrizes ergonômicas na universidade. MÉTODOS: Esse estudo investigou o universo de alunos matriculados em disciplinas clínicas (148) e respectivos professores (30) do curso de odontologia da Universidade Federal do Rio Grande do Norte, Natal-RN a respeito dos princípios ergonômicos utilizados na rotina clínica. Paralelamente foi pesquisada a incidência de sintomatologia dolorosa nos alunos por intermédio do questionário nórdico e a partir dos resultados foi mensurado o índice de severidade dos sintomas em alunos. The Nordic Musculoskeletal Questionnaire (NMQ) é um instrumento de diagnóstico, proposto para padronizar a mensuração de relatos de sintomas osteomusculares. A análise dos dados foi através do programa SPSS-Statistical Package for the Social Sciences, versão 17.0 realizada analítica e descritivamente, com determinação das médias (x), desvio-padrão para variáveis quantitativas, freqüências simples e relativas para as variáveis categóricas, além da estatística de associação entre grupos (teste t) e a análise de associação do quiquadrado com nível de significância 5% entre as variáveis (Person). As respostas das questões abertas foram codificadas e transformadas em freqüências, descritas posteriormente. RESULTADOS: A aplicabilidade de medidas ergonômicas nas clínicas universitárias não foi evidenciada pelo universo de discentes e docentes. Quanto ao relato de sintomas osteomusculares o sexo feminino foi o mais acometido qualquer que seja o nível acadêmico cursado. As regiões anatômicas de maior grau de severidade de relatos dos sintomas foram: pescoço, parte inferior das costas, punhos, mãos e ombros, com significância etatística p<0,001. CONCLUSÃO: Em função dos achados os autores apresentam um protocolo de intervenção clínica baseado nos determinantes ergonômicos da Associação internacional de ergonomia (EAI) como medida de prevenção da saúde ocupacional dos futuros cirurgiões-dentistas ainda em processo de formação nas clínicas odontológicas das universidades.

Avaliação das técnicas de soldagem MIG-P CA e MIG-P CC+ aplicadas ao passe de enchimento em liga de alumínio AA5083

For contain beneficial properties, aluminum alloys are gaining more importance in different industrial areas, becoming the subject of study in several academic fields. When related to welding these alloys have some peculiarities that may hinder the union, such as microscopic oxide layer present on the metal surface. The MIG welding process, also known as GMAW, has developed versions that can be effective for welding aluminum. Knowing this, for this paper, two versions of pulsed MIG (CC + and CA) were chosen to evaluate which best suits pass by filling bevel on AA5083 aluminum sheets with 8 and 12 mm thick respectively. Furthermore, two types of wire, ER5087 and ER5183 were evaluated. To evaluate the process and versions of the wires, the high-speed cameras and thermal were used to monitor the metal transfer and the thermal behavior respectively, and the metallographic analysis for macrographic view of the weld beads and non-destructive testing by radiography for observation of possible discontinuities. It was found that the technique of MIG-P CA showed better results ahead of another technique both welding conditions imposed. When connected to the wires, they showed similar results, with uniform cords and seamless

Caminhos para a avaliação da formação em odontologia: desenvolvimento, validação e aplicação de critérios

The need for universal access to health and the failure of the pedagogical model centered on the transmission of knowledge has led to changes in the training of health professionals. The objective of this study was to provide a new alternative for evaluating dental students through the development, validation and application of evaluation criteria based on the National Curriculum Guidelines (DCN in Brazil). Therefore, the study was conducted in three phases: development and validation of evaluation criteria of Dentistry courses based on the DCN; a pilot study to verify the applicability of the validated criteria and evaluation of the dentistry courses in the Northeast. In the first stage, a logical model was formulated, allowing for the construction of a criteria matrix, validated by a modified Delphi consensus technique. The validated matrix has the following dimensions: Profile of graduates, health care guidance, teaching and service integration, and pedagogical approach. The pilot study was conducted in five dental courses through a documentary study of the pedagogical project course (PPC), and application of validated questionnaires and interviews with course coordinators. The results of the pilot study indicate the possibility of being verified by means of validated criteria and using different methodological proposals, advances and curricular limitations facing the proposed reorientation of training recommended by DCN. The evaluation of Northeast Dentistry courses was carried out by applying a questionnaire validating a matrix of 30 course coordinators, including public and private institutions. The data were submitted to descriptive analysis, and also tested the difference between means and the correlation between the assessment of the coordinators in the dimensions and sub-dimensions with each other, among the general evaluation of courses and between the following variables: administrative category, time since last curriculum updating, participation in reorienting the training of health professionals programs, ENADE and CPC (Preliminary Concepts of the Course) scores in the year 2013. Positive correlation (p <0.01) was found between the means obtained by the perception of the coordinators in most dimensions, and also between them and the overall performance of the course. There were no significant differences between the coordinators’ perception about course performance and the administrative category (public / private). This difference is slightly higher when the average performance is compared with respect to time due to the last curriculum update, getting better performance in courses with the latest updated curriculum, even with there not 11 being this significant difference between dimensions. Better averages of performance were obtained in courses that do not participate in reorientation programs of professional training, with a significant difference (p<0.05) for the overall score and for all dimensions except the dimensions of teaching-service Integration (p = 0.064). There was no significant correlation between the assessment of coordinators in all dimensions, in the overall assessment or ENADE and CPC scores in 2013. The final instrument proposed in this study is a different alternative assessment for health training of both dentists and other professionals, considering that the DCN providing for the training and graduation of professionals is focused on the health needs of the population, integrated with the SUS (the National Brazilian Health System) and based on student-centered learning.

Análise não-linear do campo de temperaturas desenvolvidas durante a soldagem do tipo TIG contínuo em placas delgadas

This study offers an analytical approach in order to provide a determination of the temperature field developed during the DC TIG welding of a thin plate of aluminum. The non-linear characteristics of the phenomenon, such as the dependence of the thermophysical and mechanical properties with temperature were considered in this study. In addition to the conductive heat exchange process, were taken into account the exchange by natural convection and radiation. A transient analysis is performed in order to obtain the temperature field as a function of time. It is also discussed a three-dimensional modeling of the heat source. The results obtained from the analytical model were be compared with the experimental ones and those available in the literature. The analytical results show a good correlation with the experimental ones available in the literature, thus proving the feasibility and efficiency of the analytical method for the simulation of the heat cycle for this welding process.