O compromisso político do serviço prestado pela Fundação Bradesco na cidade de João Pessoa

In this work we have analyzed the political commitment of the social assistance sponsored by the Bradesco Foundation in João Pessoa. This Foundation is a private institution of public interest that provides social assistance to low income populations all over Brazil. This kind of work is one of the oldest management initiatives in what is actually referred to as managers` social responsibility. This thesis assumes that managers who are in fact socially responsible should guide their actions by the principles of social democracy, so that everyone can enjoy citizens` social freedom, and guarantee their rights as well as the political awareness of social actors. Analysis of documents and a qualitative approach have been applied to the pedagogical Project of the Foundation, as well as phenomenology to study the social profile of their students. The analysis of the pedagogical project as well as the students` standpoint towards life reveals that the Bradesco Foundation is indeed committed to the social efficacy of its students. The educational proposal of the organization includes those elements that are required for teenagers` education envisaging participative citizenship. The teenagers` speech reveals that they have developed the project identity, being therefore able to take part in the process of political transformation of our time. The results indicate that the Bradesco Foundation not only guarantees some of the basic social rights for the healthy development of those who attend their courses, but also sponsors a high level education providing both a technical and a political formation

Ativismo ministerial na implementação de políticas públicas

The research aims to analyze the reasons and the unique role of prosecutors in the promotion of public policies. The opening lines deal with the evolution and expansion of the general theory of the fundamental rights in the international and national levels and that have led to the creation of a welfare state concerned with carrying out positive actions which aim at the community well-being. Thus, it is clear that, after the uneven development of the Brazilian democracy, the Constitution of 1988 not only has erected to a state socially responsible, but also built a system of guarantees which highlights the significant expansion of the Powers of the Public Ministry and has now taken an outstanding position in regard to collective rights, allowing, at the same time, its members to perform the syndication of state actions, particularly public policies, correcting the course of these administrative processes in the presence of poor management and inactivity of the public administrator when acting in defense of fundamental rights. This ministerial activism, even facing the obstacles and boundaries submitted to its pursuit, has shown an increase in actions that culminated, in the last ten years, in a significant number of judicial and extrajudicial measures that indicated the correction of public policies and actions in areas of health, education, housing and the environment. In this process of monitoring and doing, the important role of the other social characters is highlighted, especially the one of the citizen who is responsible for most of the complaints that start the initiatives of the Public Ministry and that can be deployed through a significant list of judicial and extrajudicial instruments, especially the important procedure that allows the hearing and participation of the involved in the implementation of public policies, enabling a collective even a consensual solution of the matter generated among the Public Administration. Given these initiatives, the ministerial activism has established itself as a movement of its own characteristics, aimed to guarantee the fundamental rights, especially when these are not targeted by state actions that should contribute to the achievement of the democratic state of law idealized by the Federal Constitution without any distortion of direction. Nevertheless, this activism still seeks for its full accomplishment in the practical world

Responsabilidade social empresarial: modalidades e grau de participação em meios de hospedagem em Ponta Negra, Natal/RN

That work has as objective to investigate and to analyze the strategies which they were developed by companies of lodging means with ends of social responsibility in Rio Grande do Norte (RN). Therefore, it got data along with the Office of Tourism of the Municipal district of Natal , the Office of Tourism of RN and the cadasters of the firms of the lodging means in the district of Ponta Negra. In after research of field, it verified the enterprises that now develop lodging activities in that quarter in Ponta Negra. It applied Instrument of research which it was elaborated based on the set of indicators of social responsibility of Ethos Institute, structured with binary questions and some open ones. It shows as results which actions the investigated companies develop. Confronting these results with researched theoretical referencial, it points an intermediate degree of socially responsible actions. Comparing with the evaluation accomplished by Ethos Institute, the investigated firms are in incipient condition, with punctual actions, however, they already present the awakening about this thematic

Uso de resíduo e de minerais de pegmatito da região do seridó RN e de argilas portuguesas em formulações de grês porcelanato

In the State Rio Grande do Norte, Brazil, the most significant deposits of minerals in the production of granite and pegmatite are Seridó region. Municipalities of Parelhas and Equador are the main responsible for the production of feldspar, quartz, kaolin and granite. The ceramic industries are always in search of competitiveness by investing in new products or improving existing techniques. The stoneware is a type of pottery that stands in the market because it presents technical and aesthetic characteristics superior to other existing products. Characteristics of the raw materials initially obtained with chemical analysis and mineralogical analysis are crucial in getting a product that satisfies the conditions in a manufacturing process and is, in principle, directly related to the firing cycle. This research aimed at developing new formulations for the mass production of ceramic stoneware. The raw materials initially characterized were feldspar, quartz, kaolin and granite. As part of the research was developed at the University of Aveiro, in Portugal, we used two clays used in the production of Portuguese ceramics. The raw material Brazilian and Portuguese and the final product, both in Portugal and Brazil, were analyzed for X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis, thermal analysis and analysis of scanning electron microscopy (MEV). The specimens prepared at the University of Aveiro (DECV) were sintered at 10000C and 12000C and the specimens prepared in UFRN were sintered at 10000C, 10500C, 11000C, 11500C, 12000C, 12500C and 13000C, but the best results and demonstrating the presence of the mineral mullite were at temperatures of 12000C, 12500C and 13000C. The results showed that the granite waste used may be considered raw material of excellent quality for use in the ceramic industry and coating floors and more accurately by the industry of stoneware. Physical and mechanical tests conducted on samples of the formulations F01 and F02 developed in UFRN showed a water absorption and mechanical strength suitable for the stoneware

Conservação de espécies nativas em um assentamento rural do município de Apodi-RN: impactos socioambientais e econômicos e o uso da biotecnologia como alternativa promissora

The Caatinga biome has a high diversity of potential and their conservation constitutes one of the greatest challenges of Brazilian science. The sustainable management of the Caatinga emerges as an alternative that through the formation of systems agrossilvipastoris, enables the use of forest resources sustainably, ensuring their conservation, regeneration and recovery. In RN this technique has been developed mainly in settlements of Agrarian Reform, such as P. A. Moaci Lucena, and their impacts go beyond the environmental aspect and reverberate socially and economically on the quality of life of family farmers. Despite the efficiency of the Sustainable Management of the Caatinga in the conservation of native species, many forests species of this biome faces serious problems of propagation and for this reason have become vulnerable to extinction, as is the case of Mimosa caesalpiniifolia Benth . Thus , it is evident the need to use sustainable alternatives to overcome the difficulties of propagation of this species and enable their replacement in areas where their existence is threatened. The Plant Biotechnology is considered as a promising alternative in this sense, considering that by micropropagation enables the large-scale production of seedlings with high health genetics status. This work has the following objectives: evaluate the perception of family farmers of P. A. Moaci Lucena in relation to social, environmental and economic impacts of the Sustainable Management of the Caatinga and check the conditions of germination and in vitro propagation of Mimosa caesalpiniifolia Benth that enabling the production of seedlings of this specie on a large scale. To achieve the first objective, semi-structured interviews showed that in the perception of farmers PA Moaci Lucena, the Sustainable Management of the Caatinga was responsible for generating many social, environmental and economic impacts that affected directly in the improvement in the quality of life of the families of the Settlement Project Moaci Lucena. Have to achieve the second objective, were investigated the influence of different substrates and concentrations of growth regulator BAP in the germination and shoot induction in vitro of Mimosa caesalpiniifolia Benth. The vermiculite was presented as the most suitable substrate for germination of this species, because it provided a more rapid germination, higher growth rates and higher dry matter accumulation. Regarding micropropagation, the concentration of 17.76 μmol/L of BAP presented a more responsive in relation to multiplication rate and the number of shoots in M. caesalpiniifolia, thus constituting the most suitable concentration for the in vitro propagation of this specie

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

O objetivo deste estudo foi comparar a fusibilidade de ligas de Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) e Co-Cr-Mo (Vera-PDI), incluídas em revestimentos à base de fosfato, sílica ou utilizando uma técnica mista. Uma rede de nylon quadrada (10 X 10 mm) com 100 espaços abertos serviu de modelo para construção de padrões de cera, que foram incluídos com revestimento à base de sílica, revestimento fosfatado e técnica mista (camada de revestimento fosfatado com 2 mm de espessura + revestimento à base de sílica). Quarenta e cinco espécimes (5 para cada condição experimental) foram fundidos sob chama de gás-oxigênio e a seguir jateados com óxido de alumínio. O número de segmentos fundidos completos foi contado para obter uma percentagem designada como "valor de fusibilidade", representando a precisão da liga em reproduzir os detalhes do molde. A análise estatística por meio de ANOVA a dois critérios e teste Tukey mostrou que, comparando-se as ligas, a Remanium 2000 teve fusibilidade estaticamente semelhante (p>0,05) à da Vera PDI e inferior à da liga Durabond (p<0,05). Considerando os resultados da técnica mista, a liga Remanium 2000 teve menor valor de fusibilidade (p<0,05) que as ligas Durabond e Vera PDI, que apresentaram valores estatisticamente semelhantes entre si (p>0,05). Concluindo, a fusibilidade da liga de Co-Cr-Mo-W (Remanium 2000) foi comparável à da liga de Co-Cr (Vera PDI) e inferior à da liga de Ni-Cr alloy (Durabond). À exceção da liga Remanium 2000, a técnica de inclusão mista aumentou consideravelmente a capacidade das ligas testadas de reproduzir os detalhes do molde, quando comparada à técnica de inclusão em revestimento fosfatado. A técnica de inclusão mista representa uma alternativa para melhorar a fusibilidade de ligas de metais básicos sem afetar a qualidade superficial das peças metálicas.

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

O objetivo deste estudo foi comparar a fusibilidade de ligas de Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) e Co-Cr-Mo (Vera-PDI), incluídas em revestimentos à base de fosfato, sílica ou utilizando uma técnica mista. Uma rede de nylon quadrada (10 X 10 mm) com 100 espaços abertos serviu de modelo para construção de padrões de cera, que foram incluídos com revestimento à base de sílica, revestimento fosfatado e técnica mista (camada de revestimento fosfatado com 2 mm de espessura + revestimento à base de sílica). Quarenta e cinco espécimes (5 para cada condição experimental) foram fundidos sob chama de gás-oxigênio e a seguir jateados com óxido de alumínio. O número de segmentos fundidos completos foi contado para obter uma percentagem designada como "valor de fusibilidade", representando a precisão da liga em reproduzir os detalhes do molde. A análise estatística por meio de ANOVA a dois critérios e teste Tukey mostrou que, comparando-se as ligas, a Remanium 2000 teve fusibilidade estaticamente semelhante (p>0,05) à da Vera PDI e inferior à da liga Durabond (p<0,05). Considerando os resultados da técnica mista, a liga Remanium 2000 teve menor valor de fusibilidade (p<0,05) que as ligas Durabond e Vera PDI, que apresentaram valores estatisticamente semelhantes entre si (p>0,05). Concluindo, a fusibilidade da liga de Co-Cr-Mo-W (Remanium 2000) foi comparável à da liga de Co-Cr (Vera PDI) e inferior à da liga de Ni-Cr alloy (Durabond). À exceção da liga Remanium 2000, a técnica de inclusão mista aumentou consideravelmente a capacidade das ligas testadas de reproduzir os detalhes do molde, quando comparada à técnica de inclusão em revestimento fosfatado. A técnica de inclusão mista representa uma alternativa para melhorar a fusibilidade de ligas de metais básicos sem afetar a qualidade superficial das peças metálicas.

Uso de resíduo e de minerais de pegmatito da região do seridó RN e de argilas portuguesas em formulações de grês porcelanato

In the State Rio Grande do Norte, Brazil, the most significant deposits of minerals in the production of granite and pegmatite are Seridó region. Municipalities of Parelhas and Equador are the main responsible for the production of feldspar, quartz, kaolin and granite. The ceramic industries are always in search of competitiveness by investing in new products or improving existing techniques. The stoneware is a type of pottery that stands in the market because it presents technical and aesthetic characteristics superior to other existing products. Characteristics of the raw materials initially obtained with chemical analysis and mineralogical analysis are crucial in getting a product that satisfies the conditions in a manufacturing process and is, in principle, directly related to the firing cycle. This research aimed at developing new formulations for the mass production of ceramic stoneware. The raw materials initially characterized were feldspar, quartz, kaolin and granite. As part of the research was developed at the University of Aveiro, in Portugal, we used two clays used in the production of Portuguese ceramics. The raw material Brazilian and Portuguese and the final product, both in Portugal and Brazil, were analyzed for X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis, thermal analysis and analysis of scanning electron microscopy (MEV). The specimens prepared at the University of Aveiro (DECV) were sintered at 10000C and 12000C and the specimens prepared in UFRN were sintered at 10000C, 10500C, 11000C, 11500C, 12000C, 12500C and 13000C, but the best results and demonstrating the presence of the mineral mullite were at temperatures of 12000C, 12500C and 13000C. The results showed that the granite waste used may be considered raw material of excellent quality for use in the ceramic industry and coating floors and more accurately by the industry of stoneware. Physical and mechanical tests conducted on samples of the formulations F01 and F02 developed in UFRN showed a water absorption and mechanical strength suitable for the stoneware