Links hipertextuais na comunicação científica: análise webométrica dos sítios acadêmicos latino-americanos em ciências sociais

VANTI, Nadia. Links hipertextuais na comunicação científica: análise webométrica dos sítios acadêmicos latino-americanos em Ciências Sociais. Porto Alegre, 2007. 292 f. Tese (Doutorado em Comunicação e Informação) – Universidade Federal do Rio Grande do Sul. Porto Alegre, 2007.

Síntese e caracterização de catalisadores nanométricos de LaSrNiO4 para aplicação em dessulfurização de tiofeno

The mixed metal oxides constitute an important class of catalytic materials widely investigated in different fields of applications. Studies of rare earth nickelates have been carried by several researchers in order to investigate the structural stability afforded by oxide formed and the existence of catalytic properties at room temperature. So, this study aims synthesize the nanosized catalyst of nickelate of lanthanum doped with strontium (La(1-x)SrxNiO4-d; x = 0,2 and 0,3), through the Pechini method and your characterization for subsequent application in the desulfurization of thiophene reaction. The precursor solutions were calcined at 300ºC/2h for pyrolysis of polyester and later calcinations occurred at temperatures of 500 - 1000°C. The resulting powders were characterized by thermogravimetric analysis (TG / DTG), surface area for adsorption of N2 by BET method, X-ray diffraction (XRD), scanning electron microscopy (HR_SEM) and spectrometry dispersive energy (EDS). The results of XRD had show that the perovskites obtained consist of two phases (LSN and NiO) and from 700ºC have crystalline structure. The results of SEM evidenced the obtainment of nanometric powders. The results of BET show that the powders have surface area within the range used in catalysis (5-50m2/g). The characterization of active sites was performed by reaction of desulfurization of thiophene at room temperature and 200ºC, the relation F/W equal to 0,7 mol h-1mcat -1. The products of the reaction were separated by gas chromatography and identified by the selective detection PFPD sulfur. All samples had presented conversion above 95%

Conversão térmica e termocatalítica à baixa temperatura do óleo de girassol para obtenção de bio-óleo

The use of biofuels remotes to the eighteenth century, when Rudolf Diesel made the first trials using peanut oil as fuel in a compression ignition engine. Based on these trials, there was the need for some chemical change to vegetable oil. Among these chemical transformations, we can mention the cracking and transesterification. This work aims at conducting a study using the thermocatalytic and thermal cracking of sunflower oil, using the Al-MCM-41 catalyst. The material type mesoporous Al-MCM-41 was synthesized and characterized by Hydrothermical methods of X-ray diffraction, scanning electron microscopy, nitrogen adsorption, absorption spectroscopy in the infrared and thermal gravimetric analysis (TG / DTG).The study was conducted on the thermogravimetric behavior of sunflower oil on the mesoporous catalyst cited. Activation energy, conversion, and oil degradation as a function of temperature were estimated based on the integral curves of thermogravimetric analysis and the kinetic method of Vyazovkin. The mesoporous material Al-MCM-41 showed one-dimensional hexagonal formation. The study of the kinetic behavior of sunflower oil with the catalyst showed a lower activation energy against the activation energy of pure sunflower oil. Two liquid fractions of sunflower oil were obtained, both in thermal and thermocatalytic pyrolisis. The first fraction obtained was called bio-oil and the second fraction obtained was called acid fraction. The acid fraction collected, in thermal and thermocatalytic pyrolisis, showed very high level of acidity, which is why it was called acid fraction. The first fraction was collected bio-called because it presented results in the range similar to petroleum diesel

Determinação da idade dental de crianças brasileiras nordestinas: novos valores de conversão de maturidade dental para população específica

Since Demirjian's system of estimating dental maturity was first described, many researchers from different countries have tested its accuracy among diverse populations. Some of these studies have pointed out a need to determine population-specific standards. In Brazil, the Northeast region is the one that most suffers the negative impact of exodus, specially related to the increase of abandoned children in the cities. The aim of this study was to test the accuracy of Demirjian's system for assessing the dental maturity of northeastern Brazilian children, so as to present a scale for maturity score conversion into dental age developed specifically for this population. This could be used for forensic, anthropological and legal matters, and also as a model for other countries attempting to formulate their own conversion scales. Panoramic radiographs of 1,491 children (821 females and 670 males), aged 7 to 13 years, from Ceará state, northeast Brazil, were assessed by a single observer to determine dental age (DA) according to Demirjian's system. The mean percentage of intra-observer agreement was 86.6%, with a mean Cohen's Kappa coefficient of 0.67 (substantial agreement). The DA was compared by paired t-test to subjects' chronological age (CA). The differences between CA and DA in all age groups were statistically significant (p<0.0001), demonstrating a great advancement in DA among Brazilians. Scatter plots were drawn for both genders, and the data were fitted to a growth curve, y = 100/ (1 + e-a(x b)). Graphs corresponding to the 50th percentile curves were produced. A table with new values for the conversion of maturity score into dental age for northeastern Brazilian children is presented. The great advancement in DA, as obtained by Demirjian's system in this population, justified the determination of specific scores for dental maturity assessment

Os filhos evangélicos do novo caldeirão do diabo: a conversão religiosa na penitenciária de alcaçuz

The theme of the research is inserted at a field of intersection between the Sociology of Religion and Sociology of Violence, having as the general objective study the sociological meaning of the conversion of prisoners that lives at the biggest prison (Prison of Alcaçuz) of Rio Grande do Norte to the evangelical churches. The research is justified, because Brazil shelter the fourth greater arrested population arrested of the world, with projections indicating that it can turn the greatest in 2034. Besides, this study about religious conversion of prisoners to the Social Sciences is too important, because is a theme little developed in Brazil and deserves attention, one time that as the arrested people as the evangelicals are in expansion in our country. Starting from the precedent observations, we guide ourselves by the following problematic of research: the religious practice in Alcaçuz presents a mere instrumental perspective, where the actions of prisoners converted was on purpose oriented to conquest material or symbolic privileges; or purely religious, where seek a moral renovation? To develop the work, the scientific methodology adopted was exploratory and explanatory, using the Goffman´s theory about total institutions and presentation of self, and Blumer´s doctrine relating to Symbolic Interacionism and the Story life method, besides considerations about evangelical religion. Having this theoretical basis, was accomplished the Field research, when were made interviews and applied questionnaires to 11 Jailer Agents, 31 prisoners, Director and Vice-Dictor (in November, 2011), the coordinator of social projects of the prison and the coordinator of evangelization at the prisons in Rio Grande do Norte. As results, it was seeing in Alcaçuz that the prisoners can be separated in two groups: the one of Pavilions and other one of the Medical Section. The Pavilions are branded for managerial and structural problems, where are found idle prisoners in collective cells and with a historical of escaping attempts, mutinies and murders. The Medical Section has some individual cells or destined for two people, besides few collective also, and the prisoners work and have a more disciplined behavior, there isn t escapes or rebellions and that, for these reasons end for have more confidence from the Administration. About the presence of evangelical prisoners, most are at Medical Section, where exist a specific place to the cults (what doesn t at Pavilions). At the end, the conclusion is that the prisoner that says himself evangelical in Alcaçuz, although can be seeing with distrust about your real conversion, he gets win a trust vote and until the opposite being demonstrated in other words, that he is not hiding himself behind the bible to divert the vigilance of Direction and practice disciplinary faults without make any suspicions, is treated with more respect and has more opportunities live at Medical Section; have work, that most of times is paid and guarantee the homologation of your payment of penalty with work, besides other benefits, diminishing his time in jail

Conversão do metano via oxicloração em reator de leito fixo utilizando catalisador do tipo CuCl2/SiO2

Supported catalysts of CuCl2 on sílica were used in the methane oxychlorination reaction. The materials were synthesized by the ion exchange technique in a basic solution, using a copper-ammonia complex with 3 and 6 % of nominal copper loading. The materials where characterized by thermogravimetry (TG), X-ray Fluorescence Spectroscopy (XRF), Temperature Programmed Reduction (TPR), Scanning Electron Microscopy with X-ray microanalysis (SEM/EDS), BET specific area and pore distribution. The characterization confirms the presence of copper on the support surface, concluding that the ion exchange technique was adequate in the catalyst synthesis. For the reaction test, an oxychlorination bench scale unit was employed. The tests were carried at 673 and 773 K. The results showed the influence of temperature and catalyst copper content on the oxychlorination of methane reaction

Conversão catalítica de clorometano em hidrocarbonetos

Amorphous silica-alumina and modified by incipient impregnation of iron, nickel, zinc and chromium were synthetized in oxide and metal state and evaluated as catalysts for the chloromethane conversion reaction. With known techniques their textural properties were determined and dynamics techniques in programmed temperature were used to find the acid properties of the materials. A thermodynamic model was used to determine the adsorption and desorption capacity of chloromethane. Two types of reactions were studied. Firstly the chloromethane was catalytically converted to hydrocarbons (T = 300 450 oC e m = 300 mg) in a fixed bed reactor with controlled pressure and flow. Secondly the deactivation of the unmodified support was studied (at 300 °C and m=250 g) in a micro-adsorver provided of gravimetric monitoring. The metal content (2,5%) and the chloromethane percent of the reagent mixture (10% chloromethane in nitrogen) were fixed for all the tests. From the results the chloromethane conversion and selectivity of the gaseous products (H2, CH4, C3 and C4) were determined as well as the energy of desorption (75,2 KJ/mol for Ni/Al2O3-SiO2 to 684 KJ/mol for the Zn/Al2O3-SiO2 catalyst) considering the desorption rate as a temperature function. The presence of a metal on the support showed to have an important significance in the chloromethane condensation. The oxide class catalyst presented a better performance toward the production of hydrocarbons. Especial mention to the ZnO/Al2O3-SiO2 that, in a gas phase basis, produced C3 83 % max. and C4 63% max., respectively, in the temperature of 450 oC and 20 hours on stream. Hydrogen was produced exclusively in the FeO/Al2O3-SiO2 catalysts (15 % max., T = 550 oC and 5,6 h on stream) and Ni/SiO2-Al2O3 (75 % max., T = 400 oC and 21,6 h on stream). All the catalysts produced methane (10 à 92 %), except for Ni/Al2O3-SiO2 and CrO/Al2O3-SiO2. In the deactivation study two models were proposed: The parallel model, where the product production competes with coke formation; and the sequential model, where the coke formation competes with the product desorption dessorption step. With the mass balance equations and the mechanism proposed six parameters were determined. Two kinetic parameters: the hydrocarbon formation constant, 8,46 10-4 min-1, the coke formation, 1,46 10-1 min-1; three thermodynamic constants (the global, 0,003, the chloromethane adsorption 0,417 bar-1, the hydrocarbon adsorption 2,266 bar-1), and the activity exponent of the coke formation (1,516). The model was reasonable well fitted and presented a satisfactory behavior in relation with the proposed mechanism

A incorporação da saúde bucal no programa saúde da família do Rio Grande do Norte: investigando a possibilidade de conversão do modelo assistencial

The Health Family Program (HFP) was founded in the 1990s with the objective of changing the health care model through a restructuring of primary care. Oral health was officially incorporated into HFP mainly through the efforts of dental professionals, and was seen as a way to break from oral health care models based on curative, technical biological and inequity methods. Despite the fast expansion of HFP oral health teams, it is essential to ask if changes are really occurring in the oral health model of municipalities. Therefore, the purpose of this study is to evaluate the incorporation of oral health teams into the Health Family Program by analyzing the factors that may interfere positively or negatively in the implementation of this strategy and consequently in the process of changing oral health care models in the National Health System in the state of Rio Grande do Norte, Brazil. This evaluation involves three dimensions: access, work organization and strategies of planning. For this purpose,19 municipalities, geographically distributed according to Regional Public Health Units (RPHU), were randomly selected. The data collection instruments used were: structured interview of supervisors and dentists, structured observation, documental research and data from national health data banks. It was possible to identify critical points that may be impeding the implementation of oral health into HFP, such as, low incomes, no legal employment contract, difficulty in referring patients for high-complexity procedures, in developing intersectoral actions and program strategies such as epidemiologic diagnosis and evaluation of the new actions. The majority of municipalities showed little or no improvement in oral health care after incorporating the new model into HFP. All of them had failures in most of the aspects mentioned above. Furthermore, these municipalities are similar in other areas, such as low educational levels in children from 7 to 14 years of age, high child mortality rates and wide social inequalities. On the other hand, the five municipalities that had improved oral health, according to the categories analyzed, offered better living conditions to the population, with higher life expectancy, low infant mortality rates, per capita income among the highest in the state as well as high Human Development Index (HDI) means. Therefore, it is possible to conclude that public policies that include aspects beyond the health sector are decisive for a real change in health care models

Síntese, caracterização e avaliação catalítica do silicoaluminofosfato SAPO-11 sulfatado

Due to environmental restrictions around the world, clean catalytic technology are of fundamental importance in the petrochemical industry and refineries. Creating the face of this a great interest in replacing the liquid acids for solid acids, so as molecular sieves have been extensively studied in reactions involving the acid catalysis to produce chemical substances with a high potential of quality. Being the activity of the catalysts involved in the reaction attributed to the acid character of them involved for the Lewis and Brönsted acid sites. Based on this context, this study aimed to prepare catalysts acids using a molecular sieve silicoalumino-phosphate (SAPO-11) synthesized in hidrotermical conditions and sulphated with sulphuric acid at different concentrations, using to it the method of controlled impregnating. The samples resulting from this process were characterized by x-ray difratometry (DRX), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), thermal analysis (TG-DTG) and determination of total acidity (by n-butilamin adsorption). The results show that the synthesis method used was efficient in the formation of AEL structure of SAPO-11 and when being incorporated the sulfate groups in this structure the acidity of the material was increased, pointing out that to very high concentrations of acid there is a trend of decrease the main peaks that form the structure. Finally they were tested catalytictly by the reaction model of conversion of m-xylene which showed favorable results of conversion for this catalyst, showing to be more selective of cracking products than isomerization, as expected, in order that for the o-xylene selectivity there was no positive change when to sulfate a sample of SAPO-11, while for light gases of C1-C4 this selectivity was remarkably observed

Obtenção de biodiesel através da transesterificação do óleo de farelo de arroz utilizando KI/Al2O3

This study proposes to find a biodiesel through transesterification of rice bran oil with KI/Al2O3 checking the influence of two types of alumina (Amorphous and Crystalline) for conversion into methyl esters. The catalyst was synthesized by the wet impregnation method. Adding 30 mL of 35% KI(aq.) in 10 g of alumina, under stirring at 80 °C for 3 hours. The reaction conditions used in this study were optimized, with a molar ratio methanol:oil of 15:1, 8 h of reaction time and reflux temperature. The catalyst amount was varied in the range of 1 to 5 % wt. The solid catalysts materials were analyzed by: x-ray diffraction (XRD), thermogravimetry (TG), N2 adsorption/desorption, scanning electron microscopy (SEM) and basicity, for the identification of its structure and composition, verifying the presence of basic sites. The results showed that Al2O3(A) presents an amorphous structure, high surface area and a better catalytic activity, in relation to the catalyst synthesized with Al2O3(C) support that proved to have a more crystalline structure, having as well, a lesser surface area, enabling difficulties for the incorporation of active sites. The obtained biodiesel with 5% wt. KI/Al2O3(A) presented physicochemical properties within the standards specified by the Resolution No 7/2008 ANP and obtained the best reaction yield with 95.2%, according to quantitative measurement from the TG, which showed 96.2% conversion into methyl esters. It was furthermore found that with the increasing amount of the quantity of the catalyst in the reaction, there was also an increase in the ester content obtained. The specific mass and the kinematic viscosity were reduced with the increase of the amount of quantity of the catalyst, indicating an increase in the conversion of triglycerides

Fatores que afetam o apoio de residentes ao desenvolvimento do turismo em sítios arqueológicos: um estudo no Seridó Potiguar

The tourist activity , which appropriates spaces and natural , cultural , social and economic scenarios in a given locality , requires a model of integrated development necessarily reconciling the support of residents. In this perspective , this study aims to analyze the factors influencing the support of residents in tourism development in archaeological sites , specifically in the two counties of Parelhas and Carnaúba dos Dantas , in Rio Grande do Norte, in the region of Seridó Potiguar as well as the interrelationship existing between these factors . To achieve the proposed objective of the research , a descriptive -exploratory and quantitative study based on the study of Nunkoo and Hamkisson (2012 ) , using the technique of Structural Equation Modeling - SEM to explain the relationships of the constructs used in this research. Data collection was performed during the periodof May 2013 to July 2013. Among other studies, results indicate that , for the profile of the interviewees used , the higher the confidence of the community residing in the government agencies responsible for, the largest tourism will support the resident to the tourism development and that this supply relationship institutions and government agencies an opportunity to enhance their development strategies and social thinking of the resident agent of tourism . It was also found that the analysis model proposed has a better structural relationship when used interviewees who have knowledge about the activities in the archaeological sites , then suggesting the need for further research on the effect of the level of knowledge of the interviewee on the object and support of residents to tourism development

Sistema de conversão de energia eólica baseado no gerador de indução duplamente alimentado: análise e contribuição ao controle da máquina

The humanity reached a time of unprecedented technological development. Science has achieved and continues to achieve technologies that allowed increasingly to understand the universe and the laws which govern it, and also try to coexist without destroying the planet we live on. One of the main challenges of the XXI century is to seek and increase new sources of clean energy, renewable and able to sustain our growth and lifestyle. It is the duty of every researcher engage and contribute in this race of energy. In this context, wind power presents itself as one of the great promises for the future of electricity generation . Despite being a bit older than other sources of renewable energy, wind power still presents a wide field for improvement. The development of new techniques for control of the generator along with the development of research laboratories specializing in wind generation are one of the key points to improve the performance, efficiency and reliability of the system. Appropriate control of back-to-back converter scheme allows wind turbines based on the doubly-fed induction generator to operate in the variable-speed mode, whose benefits include maximum power extraction, reactive power injection and mechanical stress reduction. The generator-side converter provides control of active and reactive power injected into the grid, whereas the grid-side converter provides control of the DC link voltage and bi-directional power flow. The conventional control structure uses PI controllers with feed-forward compensation of cross-coupling dq terms. This control technique is sensitive to model uncertainties and the compensation of dynamic dq terms results on a competing control strategy. Therefore, to overcome these problems, it is proposed in this thesis a robust internal model based state-feedback control structure in order to eliminate the cross-coupling terms and thereby improve the generator drive as well as its dynamic behavior during sudden changes in wind speed. It is compared the conventional control approach with the proposed control technique for DFIG wind turbine control under both steady and gust wind conditions. Moreover, it is also proposed in this thesis an wind turbine emulator, which was developed to recreate in laboratory a realistic condition and to submit the generator to several wind speed conditions.

Síntese e caracterização de niobiosilicatos para produção de biocombustível

The mesoporous materials has been an special attention, among them was discovered in the 1990´s the mesoporous molecular sieve of SBA-15 type. The good features of the SBA- 15 makes this material very promising in catalysis, however, due to the absence of native active sites, it has low catalytic activity. In this way, different metals and oxides have been included in this molecular sieve as a means of introducing active sites and increase its catalytic activity. Among the oxides that are being researched, there is the niobium oxide, which presents strong acid sites and exists in abundance. Brazil is the largest producer of the mineral. On the other hand, the production of biofuels has been desired, but it requires the development of new catalysts for this purpose. The aim of this work was to develop silicate of niobium by impregnation and by new synthesis method for application in the cracking of moringa oil. The methodology consisted of inserting the niobium oxide either by postsynthesis process using wet impregnation and direct insertion. For direct insert a new method was developed for pH adjustment, being tested different pH, and the pH 2.2 was used different ratios of Si/Nb. The materials were characterized by different techniques such as: XRD, N2 adsorption, SEM, EDS, UV-visible, TG/DTG, DSC, TEM, acidity by thermodesorption of n-butilamine and FTIR. After this part of the catalysts developed by the two methods were tested in the thermocatalytic cracking of moringa oil, being used a simple distillation. All silicates of Niobium obtained showed a highly ordered structure, having high specific areas, good distribution of pore diameters, beyond present a morphology in the form of fibers. In the catalysts after synthesis was observed that the niobium inserted has so as octahedrally and tetrahedrally coordinated, demonstrating that there were also oxides formed on the external surface of SBA-15. The materials obtained in the direct synthesis are only tetrahedrally coordinated. The new synthesis method of pH adjusting by using the buffer solution for it, proved to be very efficient for the production of such materials, because the materials obtained showed characteristics and structures similar to the molecular sieve of SBA-15 type. Among the pH tested the material that presented better characteristics was synthesized at pH 2.2. The application of these materials in catalytic cracking showed a higher formation of organic liquids when compared to thermal cracking, in addition to significantly reducing the acidity and residues formed, demonstrating that the use of silicates of Niobium increases both the conversion and the selectivity of the products.

Avaliação do efeito da inibição do reparo de sítios abásicos na resposta inflamatória celular

Base excision repair (BER) proteins has been associated with functions beyond DNA repair. Apurynic/apyrimidinic endonuclease 1 (APE1) is a multifunctional protein involved in a plethora of cellular activities, such as redox activation of transcription factors, RNA processing and DNA repair. Some studies have described the action of the protein 8-oxoguanine (OGG1) in correcting oxidized lesions in promoters as a step in the transcription of pro-inflammatory cytokines. Despite being especially important in redox activation of transcription factors such as nuclear factor κB (NF-κB) and AP- 1, the repair activity of APE1 has not yet been associated with the inflammatory response. In this study, experimental and bioinformatic analysis approaches have been used to investigate the relationship between inhibition of the repair of abasic sites in DNA by MX, a synthetic molecule designed to inhibt the repair activity of APE1, and the modulation of the inflammatory response. The results showed that treatment of monocytes with lipopolysaccharide (LPS) and MX reduced the expression of cytokines, chemokines and toll-like receptors, and negatively regulated biological immune processes, as macrophages activation, and NF-κB and tumor necrosis factor (TNF-α) and interferon pathways, without inducing cell death. The transcriptomic analysis suggests that LPS/MX treatment induces mitochondrial dysfunction, endoplasmic reticulum stress and activation of autophagy pathways, probably activated by impairment of cellular energy and/or the accumulation of nuclear and mitochondria DNA damage. Additionally, it is proposed that the repair activity of APE1 is required for transcription of inflammatory genes by interaction with abasic sites at specific promoters and recruitment of transcriptional complexes during inflammatory signaling. This work presents a new perspective on the interactions between the BER activity and the modulation of inflammatory response, and suggests a new activity for APE1 protein as modulator of the immune response in a redox-independent manner.

Avaliação do desempenho da paligorsquita modificada e do carvão da pirólise do lodo de esgoto no processo de degradação fotocatalítica do fenol

The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).