Relações de cooperação em consórcios públicos de regiões metropolitanas: análises do CONDIAM/PB e consórcio grande Recife

With the disorganized decentralization occurred in Brazil after the 1988 Constitution, municipalities have risen to the level of federal entities. This phenomenon became known as "municipalism" also brought some negative effects such as low capacity financial, economic and political of these entities. In the face of this reality , the municipalities sought in models of collaborative features to address public policy issues ultrarregionais, one of these models are the Public Consortia. Characterized as the organization of all federal entities that aim to solve public policy implementation alone that they could not, or spend great resources for such. This reality of the municipalities have an aggravating factor when looking at the situation in Metropolitan Regions (MRs). This is because the RMs has a historical process of formation that does not encourage cooperation, since that were created top-down during the military regime. Furthermore, the metropolitan municipalities have significant power asymmetries, localist vision, rigidity earmarked revenues, different scenarios conurbation, difficulty standardization of concepts and others that contribute to the vision of low cooperation of these metropolitan areas. Thus, the problem of this work is in the presence of collaborative arrangements, such as the Public Consortia in metropolitan areas, which are seen as areas of low cooperation. To elucidate this research was used for analysis the cases of CONDIAM/PB and Consórcio Grande Recife/PE, because they are apparently antagonistic, but with some points of similarity. The cases has as foundation the Theory of Common Resources, which provides the possibility of collective action through the initiative of individuals. This theory has as its methodology for analyzing the picture IAD Framework, which proposes its analysis based on three axes: external variables, the arena of action and results. The nature of the method of this research was classified as exploratory and descriptive. For the stage of date analysis, was used the method of document analysis and content, Further than of separation of the cases according to theur especificities. At the end of the study, noted that the CONDIAM/PB was a strategy of municipal government of Joao Pessoa to attract funds from the Federal Government for the purpose of to build a landfill, and over the years the ideology of cooperation was left aside, the prevailing view localist municipalities. In the case of Consórcio Grande Recife/PE, members act with some degree of cooperation, especially the collaborative aspect of the region, however, still prevails with greater strength the power of the state of Pernambuco in the decisions and paths of the consortium. Thus, was conclude that the Public Consortia analyzed are an experience of collaborative arrangement, from the initiative of members, as the theory of common resources says, but has not actually signed as a practice of collective action to overcome the dilemmas faced by metropolitan areas

Fachada flexível para casa padronizada em condomínios

The employment of flexibility in the design of façades makes them adaptable to adverse weather conditions, resulting in both minimization of environmental discomfort and improvement of energy efficiency. The present study highlights the potential of flexible façades as a resource to reduce rigidity and form repetition, which are usually employed in condominiums of standardized houses; as such, the work presented herein contributes to field of study of architectural projects strategies for adapting and integrating buildings within the local climate context. Two façade options were designed using as reference the bionics and the kinetics, as well as their applications to architectural constructions. This resulted in two lightweight and dynamic structures, which cater to constraints of comfort through combinations of movements, which control the impact of solar radiation and of cooling in the environment. The efficacy and technical functionality of the façades were tested with comfort analysis and graphic computation software, as well as with physical models. Thus, the current research contributes to the improvement of architectural solutions aimed at using passive energy strategies in order to offer both better quality for the users and for the sustainability of the planet

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Obtenção de uma porcelana dielétrica a partir de matérias-primas do Rio Grande do Norte

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Simulador radiográfico antropomórfico de mama humana

Mammography is a diagnostic imaging method in which interpretation depends on knowledge of radiological aspects as well as the clinical exam and pathophysiology of breast diseases. In this work a mammography phantom was developed to be used for training in the operation of mammographic x-ray equipment, image quality evaluation, self-examination and clinical examination of palpation. Polyurethane was used for the production of the phantoms for its physical and chemical properties and because it is one of the components normally used in prostheses. According to the range of flexibility of the polyurethane, it was possible to simulate breasts with higher or lower amount of adipose tissue. Pathologies such as areolar necrosis and tissue rejection due to surgery reconstruction after partial mastectomy were also simulated. Calcifications and nodules were simulated using the following materials: polyethylene, poly (methyl methacrylate), polyamide, polyurethane and poly (dimethyl silicone). Among these, polyethylene was able to simulate characteristics of calcification as well as breast nodules. The results from mammographic techniques used in this paper for the evaluation of the phantoms are in agreement with data found in the literature. The image analyses of four phantoms indicated significant similarities with the human skin texture and the female breast parenchyma. It was possible to detect in the radiographic images produced regions of high and low radiographic optical density, which are characteristic of breasts with regions of different amount of adipose tissue. The stiffnesses of breast phantoms were adjusted according to the formulation of the polyurethane which enabled the production of phantoms with distinct radiographic features and texture similar to human female breast parenchyma. Clinical palpation exam of the phantoms developed in this work indicated characteristics similar to human breast in skin texture, areolar region and parenchyma

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Plásticos reforçados a base de tecidos híbridos: efeitos da anisotropia e geometria normativa na caracterização mecânica e da fratura

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

Avaliação dos efeitos da reeducação postural global (rpg) em pacientes com espondilite anquilosante

The Ankylosing Spondylitis (AS) is a chronic inflammatory disease that primarily affects the axial skeleton, leading to limitation of spine mobility and functional disability. Physical therapy, especially exercise, is an important part in your treatment. The Global Postural Reeducation(GPR),a method that uses stretching based on evaluation of muscular chains, with significant interference in postural changes may be a complementary alternative for the treatment of this disease. The aim was to evaluate the effects of Global Postural Reeducation (GPR) in patients with Ankylosing Spondylitis (AS) and compare GPR with group conventional segmental self-stretching and breathing exercises. This is a controlled interventional study of 38 patients divided into 2 groups: a GPR group (n = 22) and a control group (n = 16). Both groups were treated over four months. With the GPR group patients, positions that stretched the shortened muscle chains were used. With the control group patients, conventional segmental self-stretching and breathing exercises were performed. The variables analyzed were: pain intensity, morning stiffness, spine mobility, chest expansion, functional capacity (Health Assessment Questionnaire - Spondyloarthropathies - HAQ-S), quality of life (Medical Outcome Study Short Form 36 Healthy Survey-SF-36), and disease activity (Bath Ankylosing Spondylitis Disease Activity Index - BASDAI). Statistical analysis was used with a significance level of p < 0.05. There was a statistically significant difference for all the parameters analyzed between pre and post-treatment in both groups. In the inter-group comparison the GPR group showed a statistically significant improvement in morning stiffness (p = 0.01), spine mobility parameters, except finger-floor distance (p = 0.11), in chest expansion (p = 0.02), and in the physical aspect component of the SF-36 (p = 0.00).Finally, we observed that this sample of patients with AS ,treatment with RPG 60 seems to have a better response in some clinical measures, than the conventional self stretching performed in groups. Further studies are needed to further evaluate this therapeutic alternative in the EA

Estudo genético-clínico de mucopolissariodoses no estado do Ceará

As mucopolissacaridoses (MPS) são doenças genéticas raras decorrente da deficiência de enzimas lisossomais envolvidas no catabolismo de glicosaminoglicanos, resultando em um amplo espectro de manifestações clínicas, progressivas e multissistêmicas, exigindo tratamento por uma equipe multidisciplinar. Embora o Nordeste brasileiro seja uma região com grande taxa de consangüinidade e um efeito fundador envolvendo MPS, não há estudos caracterizando os pacientes dessa região. Nosso objetivo foi determinar o perfil epidemiológico, clínico e genético de casos não publicados com MPS provenientes do Ceará, identificando as diferenças entre outros estudos com MPS e possíveis problemas a serem enfrentados para a realização do diagnóstico precoce. O estudo foi seccional, descritivo, com amostra de pacientes com MPS em acompanhamento no Hospital Infantil Albert Sabin e Hospital Geral Cesar Cals no período de 2006-2013. Os dados foram obtidos a partir da avaliação clínica, revisão de prontuários médicos e entrevista com os pacientes e/ou familiares realizadas pelo investigador principal. Cinquenta e três pacientes foram incluídos no estudo (36 do sexo masculino), sendo 6 MPS I, 17 MPS II, 7 MPS III (3 MPSIII-A, 3 MPS III-B, 1 MPS III-C), 7 MPS IV-A, 16 de MPS VI. O óbito ocorreu em 16 casos (3 MPS I, MPS II 6, 1 MPS IIIA , IIIB 1MPS , 1 MPS IV , 4 MPS VI). A amostra foi composta principalmente por crianças. Houve elevada taxa de consangüinidade e recorrência familiar. Os tipos mais comuns foram MPS II e MPS VI. Exceto para macrossomia em MPS II, os dados de nascimento indicam que não houve risco para desenvolvimento de viii complicações perinatais. Os sintomas iniciaram em crianças com menos de 2 anos. As manifestações clínicas foram heterogêneas exceto para atraso no desenvolvimento neurológico em MPS III e manifestações esqueléticas em MPS IV. As principais características clínicas foram macrocefalia, baixa estatura, alterações odontológicas, respiratórias, cardíacas, hepatoesplenomegalia, hérnia umbilical, rigidez articular e anormalidades esqueléticas. A terapia de reposição enzimática foi instituída em 26 casos (4 MPS I, 10 MPS II, 12 MPS VI). Os problemas sócio-econômicos das famílias, o amplo espectro de sintomas e a gravidade da doença foram causas das dificuldades em realizar a avaliação periódica pela equipe multidisciplinar, além de exames complementares de maior custo para determinar as complicações da doença. Este foi o maior estudo transversal sobre MPS no Nordeste do Brasil. Em contraste com a maior incidência de MPS I na maioria das populações ocidentais, houve maior incidência de MPS II e VI. As alterações respiratórias foram um dos principais contribuintes para a mortalidade precoce, exceto nos casos de MPS I, em que a cardiomiopatia foi prevalente. A menor expectativa de vida ocorreu em MPS I. O envolvimento cognitivo foi comum em casos graves e o maior número de órgãos envolvidos representou maior risco de morrer. Para o diagnóstico precoce, deve-se buscar indivíduos afetados em famílias em que há parentes com MPS, além do maior reconhecimento de sinais e sintomas de MPS por profissionais de saúde

Eficácia do treinamento de força sobre parâmetros cardiovasculares e antropométricos em adultos sedentários

This study aimed to determine the influence of strength training (ST), in three weekly sessions over ten weeks, on cardiovascular parameters and anthropometric measurements. It is a before and after intervention trial, with a sample composed of 30 individuals. Participants were adults aged between 18 and 40 years, from both sexes and sedentary for at least three months previously. Tests were computed ergospirometry, CRP, PWV and body composition (dependent variables) before and after the experiment. Independent variables, age and sex, were considered in order to determine their influence on the dependent variablesevaluatedend. By comparing the initial cardiovascular parameters with those obtained after intervention in patients undergoing the ST proposed (a Student s t-test was conducted within each group for samples matched to parameters with normal distribution, while the Wilcoxin was applied for those without), there was no significant difference in PWV(p =0469) or PCR(p =0.247), but there was an increase in anaerobic threshold(AT) (p=0.004) and Maximal Oxygen Uptake(VO2max) (p =0.052). In regard to anthropometric measures, individuals significantly reduced their body fat percentage (p<0.001) and fat mass (p<0,001), as well as increasing lean mass (p<0.001). However, no changes were recorded in the waist-to-hip ratio (WHR) (p= 0.777), body mass (p=0.226) or body mass index (BMI) (p =0.212). Findings of this study lead us to believe that the proposed ST, and did not increase the VOP or PCR improves cardiorespiratory capacity and body composition. Devotees of this training can therefore safely enjoy all its benefits without risk to the cardiovascular system

Da proteção à precarização um estudo do fenômeno jurídico trabalhista no contexto das transformações do capitalismo

This research aims to investigate the effectiveness of the legal labor phenomenon in contemporary capitalism as rectifier element of the contradictions between capital and labor. From the analysis of legislative developments - state and business - and court decisions related to the category of freight transport is expected to determine the protectionist stiffness proclaimed by the institutional structure of labor in Brazil, considered by the hegemonic discourse as political-economic factor that prevents growth. It is intended to unravel the relationships between political and civil society, studying the internal contradictions and ideological influence among these spaces, with theoretical support in Marx and Gramsci. The function of this research is to test the premise that the protectionist discourse is a rational action of capitalism and the organic intellectuals of political society in order to achieve hegemony and hide the real contradictions between capital and labor, in addition to also assist in the discussion on deregulation and easing in Brazil. The analysis points to the confirmation of our premise, since the evolution of the legal phenomenon in the transport sector was charging toward the neoliberal project

Novas fronteiras petrolíferas no Brasil : uma análise da necessidade de nova regulamentação da área do pré-sal sob a ótica constitucional

The Oil industry in Brazil has gone through several stages during the economical, political and social historical process. However, the significative changes have happened in the last fifteen years, due to market opening arising from the relaxation of the state monopoly over the Oil deposits and its derivatives. The edition of the Constitutional Amendment #9, changing the first paragraph of the 177th item of the Federal Constitution, marked the end of a stiffness about the monopoly that the Brazilian state kept in relation to the exploration and research of Oil and Gas. The economical order was fundamental to actualize the idea contained in the #9 Amendment, since its contents has the power to set up measures to be adopted by public power in order to organize the economical relations from a social viewpoint. The new brazilian Oil scenery, called pre-salt, presents itself in a way to amaze the economical markets, in addition to creating a new perspective to the social sector. This work will identify, in this new scenario, the need for change in the legal system. Nevertheless, this subject must not be treated in a thoughtless way: being an exhaustible good, we shall not forget that the future generations also must benefit from the exploration of natural resources recently discovered. The settlement of a new regulatory mark, including the change in the concession contract model to production and sharing is one of the suggested solutions as a bill in the National Congress, in an attempt to ensure the sovereignty of the nation. The constitutionality of a new regulatory mark is questioned, starting from an analysis of the state monopoly, grounding the comprehnsions in the brazilian constitutions, the relevance of the creation of Petrobras for self-assertion of the state about the monopoly of Oil and derivatives, and its posture after the Constitutional Amendment nº 9 (1995), when a company stops having control of the state monopoly, beginning to compete in a fairly way with other companies. The market opening and private initiative are emphasized from the viewpoint of the Constitutional Principles of the Economical and Social Order. The relaxation of the monopoly regarding the exploratory activity in the Federal Constitution doesn't deprive from the Union the ownerships of underground goods, enabling to this federal entity to contract, directly or by concession of exploration of goods, to state-owned or private companies. The existing oil in the pre-salt layer transforms the scenario from very high risk to low risk, which gives the Union the possibility of defining another way of exploring this resources in the best interests of the Public Administration

A Constituição Federal de 1988 e a integração regional : o desafio da harmonização tributária

As an effect of the growing interdependence in international relations, regional integration was conceived to face globalization, with a remarkable influence in politics and law, since the first steps of the European experience. In Latin America, regional integration ideas have blossomed in the 60 s. Among its experiences, MERCOSUL is the one with the most advanced objectives. However, MERCOSUL has not managed to achieve the objectives planned nor moved forward the integration process. Differently of what happened in Europe, in MERCOSUL the common market projected is concluded. It faced many disappointments throughout its brief history. As it matters to law, those were caused by the absence of supranationality, a mechanism that would allow MERCOSUL s decisions to be directly binding in the States with no need of bureaucratic proceedings to incorporate them to national legal systems. Among Latin American States, Brazil is probably the most resistant to integration process, due to Federal Constitution 1988 rigidity and legal professionals conservadorism towards opening legal system to international law. In Brazil hermeneutical standards are always based on national sovereignty and international law is referred as less important. The problems become more visible relating to taxation, a subject that plays an enormous role in integration process for its economic impact, demanding the execution of tax harmonization policies compatible to the integration levels aspired. However, because of the large number of tax rules in the Federal Constitution, structural changes initiatives face difficulties in order to be implemented. Actually, after two Constitutional Reforms on taxation, Brazil has not yet succeeded on promoting the necessary adaptations to regional integration. The research has confirmed the hypothesis that supranationality has indispensably to be adopted if Brazil really desires to move forward the integration process. But it has also been demonstrated that there are hermeneutical paths suitable to the constitutional profile which allow the adoption of supranationality, through the revision of the sovereignty traditional concept