Avaliação do concreto de cimento portland com resíduo da produção de scheelita em substituição ao agregado miúdo

From the 70`s, with the publication of the Manifesto for Environment UN Conference, held in Stockholm, in Sweden (1972), defend and improve the environment became part of our daily lives. Thus, several studies have emerged in several segments in order to reuse the waste. Some examples of waste incorporated in portland cement concrete are: rice husk ash, bagasse ash of cane sugar, powder-stone, microsilica, tire rubber, among others. This research used the residue of the mining industry Scheelite, to evaluate the incorporation of the residue composition of Portland cement concrete, replacing the natural sand. The percentage of residue were incorporated from 0% to 100%, with a variation of 10%, 11 being produced concrete mix in the ratio 1:2:3:0.60, by mass. We evaluated the following characteristics of concrete: slump test, compressive strength, tensile strength by diametral compression, water absorption, porosity and density, based on the ABNT, through tests performed in the Laboratory of Civil Construction, UFRN. The trace with the addition of 60% scheelite residue was obtained which better performance. Therefore, the use of the waste from the production of Scheelite is feasible due to the durability parameters (water absorption and porosity), sustainability, and the good results of the resistance of the concrete

Análise numérica do efeito de fatores influentes da reação álcali-agregado no desempenho de estruturas de concreto

The aim of this work is the numerical simulation of the mechanical performance of concrete affected by Alkali-Aggregate Reaction or RAA, reported by Stanton in 1940. The RAA has aroused attention in the context of Civil Engineering from the early 80, when they were reported consequences of his swelling effect in concrete structures, including cracking, failure and loss of serviceability. Despite the availability of experimental results the problem formulation still lacks refinement so that your solution remains doubtful. The numerical simulation is important resource for the assessment of damages in structures caused by the reaction, and their recoveries The tasks of support of this work were performed by means of the finite element approach, about orthotropic non-linear formulation, and, thermodynamic model of deformation by RAA. The results obtained revealed that the swelling effect of RAA induced decline of the mechanical performance of concrete by decreasing the margin of safety prior to the material failure. They showed that the temperature influences, exclusively, the kinetics of the reaction, so that the failure was the more precocious the higher the temperature of the solid mass of concrete

Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo

In the last decades there was a concentrate effort of researchers in the search for options to the problem of the continuity of city development and environmental preservation. The recycling and reuse of materials in industry have been considerate as the best option to sustainable development. One of the relevant aspects in this case refers to the rational use of electrical energy. At this point, the role of engineering is to conceive new processes and materials, with the objective of reducing energy consumption and maintaining, at the same time the benefits of the technology. In this context, the objective of the present research is to analyze quantitatively the thermal behavior of walls constructed with concrete blocks which composition aggregates the expanded polystyrene (EPS) reused in the shape of flakes and in the shape of a board, resulting in a “light concrete”. Experiments were conducted, systematically, with a wall (considerate as a standard) constructed with blocks of ordinary concrete; two walls constructed with blocks of light concrete, distinct by the proportion of EPS/sand; a wall of ceramic bricks (“eight holes” type) and a wall with ordinary blocks of cement, in a way to obtain a comparative analysis of the thermal behavior of the systems. Others tests conducted with the blocks were: stress analysis and thermal properties analysis (ρ, cp e k). Based on the results, it was possible to establish quantitative relationship between the concentration (density) of EPS in the constructive elements and the decreasing of the heat transfer rate, that also changes the others thermal properties of the material, as was proved. It was observed that the walls of light concrete presents better thermal behavior compared with the other two constructive systems world wide used. Based in the results of the investigation, there was shown the viability of the use of EPS as aggregate (raw material) in the composition of the concrete, with the objective of the fabrication of blocks to non-structural masonry that works as a thermal insulation in buildings. A direct consequence of this result is the possibility of reduction of the consume of the electrical energy used to climatization of buildings. Other aspect of the investigation that must be pointed was the reuse of the EPS as a raw material to civil construction, with a clear benefit to reducing of environmental problems

Aplicação de resíduo industrial para isolamento térmico: uma proposta para utilização do poliuretano de mamona com agregado de resíduo plástico termofixo

A aplicação de isolantes térmicos em sistemas construtivos promove vantagens com vistas ao conforto térmico de ambientes. E com isso, o aumento da produtividade em locais de trabalho, a sensação de bem-estar e a diminuição dos custos com climatização. A demanda por conforto ambiental, no âmbito da isolação térmica, somada ao advento de novas leis que regulam os requisitos mínimos de conforto, as exigências dos consumidores pela adoção de métodos de produção mais “limpos”, a fiscalização quanto à destinação de resíduos industriais, além da inserção de produtos no mercado com apelos ambientais, incentivaram o desenvolvimento da presente pesquisa. O presente trabalho trata da aplicação do poliuretano, visando comparar o desempenho térmico do derivado de origem vegetal (óleo de mamona) com adição de resíduo plástico termofixo em diferentes proporções (5%, 10%, 15% e 20%), com o poliuretano petrolífero, a lã de vidro e a lã de rocha através da análise de suas propriedades térmicas (condutividade térmica – k, difusividade térmica – e capacidade calorífica – Cp). . Após a realização dos ensaios, os compósitos estudados foram moídos e reutilizados como carga para novos compósitos. Com base nos resultados dos ensaios de propriedades térmicas, constatou-se que o material desenvolvido conduz menos calor que o poliuretano de petróleo, a lã de vidro e a lã de rocha, além de oferecer alta inércia térmica, bom desempenho térmico e baixo custo. Assim como foi comprovada a possibilidade de fabricação de novos compósitos para fins de isolamento, reutilizando os compósitos testados

Contribuição na caracterização de agregados comercializados no Rio Grande do Norte com ênfase na reação álcali-agregado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES

Caracterização de um compósito utilizando cimento com agregado de resíduo plástico e resíduo de gesso

The demand for environmental comfort in construction systems within the insulation and thermal comfort, plus the advent of new laws regulating the minimum requirements of comfort, disposal of solid industrial waste, construction waste, the requirements of consumers by adopting construction methods "cleaner", encouraged the development of this work. Aims technologically characterize the composite proposed in three types of samples (10%, 30% and 50% of thermoset plastic industrial waste) and raw materials: gypsum waste, cement and plastic thermosetting industrial waste in order to produce the composite with properties of thermal insulation: conductivity, thermal diffusivity, specific heat and resistivity. The physical, structural and morphological properties of the raw materials were investigated by thermogravimetry analysis (TG / DSC), X-ray diffraction (DRX), X-ray fluorescence (FXR) and scanning electron microscopy (MEV). Obtaining mechanical properties through the compression strength test. The analysis results indicate characteristics suitable for cement matrix composite production with the addition of thermosetting plastic industrial waste and gypsum waste, with potential application of these materials in composites with properties of thermal insulation. Finally, assessing what proportion showed up with better performance. Considering the analysis and testing carried out.

Caracterização de um compósito utilizando cimento com agregado de resíduo plástico e resíduo de gesso

The demand for environmental comfort in construction systems within the insulation and thermal comfort, plus the advent of new laws regulating the minimum requirements of comfort, disposal of solid industrial waste, construction waste, the requirements of consumers by adopting construction methods "cleaner", encouraged the development of this work. Aims technologically characterize the composite proposed in three types of samples (10%, 30% and 50% of thermoset plastic industrial waste) and raw materials: gypsum waste, cement and plastic thermosetting industrial waste in order to produce the composite with properties of thermal insulation: conductivity, thermal diffusivity, specific heat and resistivity. The physical, structural and morphological properties of the raw materials were investigated by thermogravimetry analysis (TG / DSC), X-ray diffraction (DRX), X-ray fluorescence (FXR) and scanning electron microscopy (MEV). Obtaining mechanical properties through the compression strength test. The analysis results indicate characteristics suitable for cement matrix composite production with the addition of thermosetting plastic industrial waste and gypsum waste, with potential application of these materials in composites with properties of thermal insulation. Finally, assessing what proportion showed up with better performance. Considering the analysis and testing carried out.

Análise microestrutural de misturas cerâmicas de grês porcelanato com adição de chamote de telhas cerâmicas

MELO, Maxymme Mendes de ; PINHEIRO, Andrea Santos ; NASCIMENTO, R. M. ; MARTINELLI, Antonio Eduardo ; DUTRA, Ricardo Peixoto Suassuna ; MELO, Marcus Antônio de Freitas . Análise microestrutural de misturas cerâmicas de grês Porcelanato com adição de chamote de telhas cerâmicas. Cerâmica (São Paulo. Impresso), v. 55, p. 356-364, 2009

Relações de cooperação em consórcios públicos de regiões metropolitanas: análises do CONDIAM/PB e consórcio grande Recife

With the disorganized decentralization occurred in Brazil after the 1988 Constitution, municipalities have risen to the level of federal entities. This phenomenon became known as "municipalism" also brought some negative effects such as low capacity financial, economic and political of these entities. In the face of this reality , the municipalities sought in models of collaborative features to address public policy issues ultrarregionais, one of these models are the Public Consortia. Characterized as the organization of all federal entities that aim to solve public policy implementation alone that they could not, or spend great resources for such. This reality of the municipalities have an aggravating factor when looking at the situation in Metropolitan Regions (MRs). This is because the RMs has a historical process of formation that does not encourage cooperation, since that were created top-down during the military regime. Furthermore, the metropolitan municipalities have significant power asymmetries, localist vision, rigidity earmarked revenues, different scenarios conurbation, difficulty standardization of concepts and others that contribute to the vision of low cooperation of these metropolitan areas. Thus, the problem of this work is in the presence of collaborative arrangements, such as the Public Consortia in metropolitan areas, which are seen as areas of low cooperation. To elucidate this research was used for analysis the cases of CONDIAM/PB and Consórcio Grande Recife/PE, because they are apparently antagonistic, but with some points of similarity. The cases has as foundation the Theory of Common Resources, which provides the possibility of collective action through the initiative of individuals. This theory has as its methodology for analyzing the picture IAD Framework, which proposes its analysis based on three axes: external variables, the arena of action and results. The nature of the method of this research was classified as exploratory and descriptive. For the stage of date analysis, was used the method of document analysis and content, Further than of separation of the cases according to theur especificities. At the end of the study, noted that the CONDIAM/PB was a strategy of municipal government of Joao Pessoa to attract funds from the Federal Government for the purpose of to build a landfill, and over the years the ideology of cooperation was left aside, the prevailing view localist municipalities. In the case of Consórcio Grande Recife/PE, members act with some degree of cooperation, especially the collaborative aspect of the region, however, still prevails with greater strength the power of the state of Pernambuco in the decisions and paths of the consortium. Thus, was conclude that the Public Consortia analyzed are an experience of collaborative arrangement, from the initiative of members, as the theory of common resources says, but has not actually signed as a practice of collective action to overcome the dilemmas faced by metropolitan areas

Analise das melhores práticas em business process management: estudo de casos em organizações hospitalares de Natal/RN

O gerenciamento dos processos organizacionais vem sendo estudado pela ciência administrativa como forma de romper com o paradigma da estrutura organizacional funcional através da Gestão por Processos. O Business Process Management ( BPM alinhado às estratégias organizacionais e suportado cada vez mais pela Tecnologia da Informação (TI), proporciona clareza nas diversas pontas do processo colaborando para sua melhoria contínua com o objetivo de gerar valor agregado ao cliente. As organizações de saúde estão entre as empresas prestadoras de serviço pouco estudadas em relação ao gerenciamento por processos. Assim, este estudo analisou por meio de um estudo empírico de natureza qualitativa, como estão sendo conduzidos os processos organizacionais hospitalares à luz das melhores práticas em BPM. A pesquisa foi realizada através do estudo de casos múltiplos realizados em duas organizações hospitalares na cidade de Natal/RN. A literatura de referência apresentou diversos fatores para um desempenho otimizado em BPM, tratados nesta pesquisa como as melhores práticas em BPM. A partir da revisão da literatura foi elaborada uma síntese das melhores práticas de BPM que serviu de base para elaboração do modelo da pesquisa utilizado para coleta e análise dos dados. Este modelo indicou onze categorias que foram utilizadas para elaboração do roteiro de estrevistas semi-estruturadas, através da técnica de análise de conteúdo, com categorização de grade fechada. As categorias foram agrupadas em duas dimensões: Elementos relacionados à gestão ( governança ; liderança , alinhamento estratégico , cultura e conhecimento ) e elementos relacionados aos processos ( desenho , responsável , executores , tecnologia da informação e indicadores ), e ainda foi identificada uma terceira categoria: escritório de processos . Para seleção dos sujeitos desta pesquisa foi adotada a estratégia em cadeia ou bola de neve . Foi possível identificar que todas as categorias apontadas no modelo de pesquisa emergem entre os fatores buscados pelas organizações hospitalares para o gerenciamento por processos com destaque para categorias: cultura ; conhecimento ; desenho ; tecnologia da informação e indicadores . Em complemento às categorias de análise, foram identificadas dificuldades relacionadas à comunicação e integração dos diversos elos do processo. Além disso, constatou-se que nos hospitais investigados há um desvio do conceito de BPM no que diz respeito a seu objetivo final: agregar valor ao cliente. A pesquisa concluiu que o gerenciamento por processos nas organizações hospitalares investigadas encontra-se em fase inicial ou em desenvolvimento, sendo necessário superar as barreiras da comunicação e edificar uma cultura organizacional orientada às necessidades dos clientes para aplicação das melhores práticas de BPM, desta forma pesquisas futuras sobre este tema em outras organizações hospitalares, podem facilitar um estudo comparativo e ampliar o conhecimento no assunto

Análise da gestão da cadeia de suprimentos de um supermercado varejista através da utilização do modelo SCOR

In the last decade the complexity of the environment in which organizations are embedded increased dramatically, having on one side the increasingly demanding consumers in regard to the quality and value of the product and the other companies with the need to reduce operating costs in order to achieve greater profitability, without this there is a downturn in growth or market share powers. In this context the necessity of effectively structuring actions relating to the line with the operational work processes so that business objectives are achieved organizational strategic planning, ensuring the competitiveness of the organization. This study aims to analyze how you have made the management of the supply chain in a grocery retailer in the light of guidelines of Supply Chain Management by using the SCOR model. For realization of this study a survey was needed, classified according to their goals, exploratory and descriptive as to its procedure, document, field and case study. Thus, the processing of data will be qualitative merit, using the thematic categorical analysis of Bardin (1977). Thus, to obtain data interviews together the operational and strategic management of a company that was named Supermarket Omega were performed. After analyzing the information obtained is perceived that there is an effort of the organization enhance its management of the supply chain. However, there is a lack of alignment between the various areas that compose it. About their work processes, we stress that the focus of the company is still very directed on sailing than profitability, although it is undergoing a transformation in its organizational culture However, records the existence of many improvement projects in developing. Thus, it can be noticed that there is some consistency between the assumptions of the SCOR model and applied within the supply chain Omega Supermarket, although a greater effort to better align with the model still needs to be studied

Fachada flexível para casa padronizada em condomínios

The employment of flexibility in the design of façades makes them adaptable to adverse weather conditions, resulting in both minimization of environmental discomfort and improvement of energy efficiency. The present study highlights the potential of flexible façades as a resource to reduce rigidity and form repetition, which are usually employed in condominiums of standardized houses; as such, the work presented herein contributes to field of study of architectural projects strategies for adapting and integrating buildings within the local climate context. Two façade options were designed using as reference the bionics and the kinetics, as well as their applications to architectural constructions. This resulted in two lightweight and dynamic structures, which cater to constraints of comfort through combinations of movements, which control the impact of solar radiation and of cooling in the environment. The efficacy and technical functionality of the façades were tested with comfort analysis and graphic computation software, as well as with physical models. Thus, the current research contributes to the improvement of architectural solutions aimed at using passive energy strategies in order to offer both better quality for the users and for the sustainability of the planet

Determinantes genéticos da hanseníase em uma população do Rio Grande do Norte

Background: Leprosy can cause severe disability and disfigurement and is still a major health in different parts of the world. Only a subset of those individuals exposed to the pathogen will go on to develop clinical disease and there is a broad clinical spectrum amongst leprosy patients. The outcome of infection is in part due to host genes that influence control of the initial infection and the host´s immune response to that infection. Aim: Evaluate if polymorphisms type SNP in the 17q118q21 chromosomic region contribute to development of leprosy in Rio Grande do Norte population. Material and methods: A sample composed of 215 leprosy patients and 229 controls drawn from the same population were genotyped by using a Snapshot assay for eight genes (NOS2A, CCL18, CRLF3, CCL23, TNFAIP1, STAT5B, CCR7 and CSF3) located in chromosomic region 17q118q21. The genotype and allele frequency were measured and statistical analysis was performed by chi-square in SPSS version 15 and graph prism pad version 4 software. Results: Ours results indicated that the markers NOS2A8277, NOS2A8rs16949, CCR78rs11574663 and CSF38rs2227322 presented strong association with leprosy and their risk genotype were GG, TT, AA and GG respectively. The risk genotypes for all markers associated to leprosy presented recessive inheritance standard. When we compared the interaction among the markers in different combination we find that the marker NOS2A8277 associated with CCR78rs11574663 presented highest risk probability to development of leprosy. When we evaluated the haplotype of the risk markers it was found a haplotype associated with increase of the protection (CSF38rs22273228CC, CCR78 rs115746638GA, NOS2A8rs169498CT and NOS2A82778GA). The association of the clinical forms paucibacilary and multibacilary with markers showed that to the markers NOS2A8 2778GG, CCR78rs115746638AA and CSF38rs22273228GG there were a strong influence to migration to multibacilary pole and to marker NOS2A8rs169498TT the high proportion was found to the paucibacilary form. Conclusions: Changes in the genes NOS2A, CCR7 and CSF3 can influence the immune response against Mycobacterium leprae. The combination among these polymorphisms alters the risk probability to develop leprosy. The markers type SNP associated to development of the leprosy also are linked to clinical forms and its severity being the polymorphism NOS2A8rs169498TT associated with paucibacilar form and the polymorphisms NOS2A82778GG, CCR78rs115746638AA and CSF38rs22273228GG associated to multibacilar form

Desenvolvimento de formulações para produção de grés porcelanato a partir de matérias-primas da região da bacia do Parnaíba

Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato

Estudo da adição de argila expandida na formulação de concretos leves

Lightweight concrete has been the subject of several studies towards the development of new building materials. Emphasis has been given on the particle size effect and nature of aggregates used as raw materials. The present study includes an analysis of the materials that make this kind of concrete, analyzes of mechanical properties such as compressive and tensile strength, in addition to assessments of the interface concrete aggregate/matrix interface, porosity and absorption profile of chloride ions in lightweight concrete based on expanded clay. The experiments were carried out by molding cylindrical samples 100 mm in diameter and 200 mm in height. The dosage experiments were performed without additives or with the addition of minerals: (T1) 1: 2.01: 1.10: 0.78 (T2) 1: 2.00: 1.32 : 0.62 - (T3) 1 :1.93 :1.54: 0.47 (cement : sand : expanded clay 0500 : expanded clay 1506).The water to cement ratio was set to 0.43. Expanded clay minerals with different average particle sizes were used, i.e., 9.5 mm/0500 and 19 mm/1506. The larger aggregate was coated by a glassy layer, yielding lower water absorption characteristics to the concrete. The results showed that the use of light expanded clay aggregates is a technically interesting solution to the production of lightweight concrete for construction applications