5 resultados para Resting Energy Expenditure
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste
Resumo:
Goats are social animals which groups are organized from dominance hierarchies, established by agonistic behaviors. The quality and productivity of the goat s milk can be influenced by the dominance hierarchy. In this context, the objectives of our work were describe the social and food behavior of Saanen goats in a semi-extensive production system; characterize the social organization from the assessment of dominance hierarchies in two seasonal periods and correlate the physicochemical quality of the goats milk according hierarchical position. The experiment was conducted in the EMPARN s experimental station, located in the district of Cruzeta/RN. We utilized 17 multiparous goats of the Saanen race, with different age and weight. The observations were performed in precipitation and drought phases. The scan method recorded the trough permanence and agonistic interactions by method "all occurrences" in the pasture the alimentary behaviors of eat, ruminate on foot, ruminate lying, leisure on foot, leisure lying and walk, by the focal animal sampling method. The goats milk was submitted to analyzes of: density, protein, fat, lactose, CSS and total solids. The animals spend most of the time feeding themselves, and the activities that demand greater energy expenditure are done in the morning. The animals changed the hierarchical structure during the seasonal periods because of the withdrawal of some individuals of the group, having more aggressive behavior in the rainy season. The dominant animal the lowet production, the more CSS and the lesser fat, the goat in the middle of the hierarchy was the one that obtained the best production and quality. We conclude that the Saanen goats adapt to the environment and the conditions of the group to ensure better survival and its production is influenced by the internal dynamics of the group
Resumo:
The study of the motivation to practice physical activities is relevant once through this it is possible to develop intervention strategies for sedentary population. In this way, the present dissertation aimed to adapt and validate for the Brazilian context the Motives for Physical Activity Measure Revised (MPAM-R). It was investigated yet the relation of some socio-demographic variables (age, gender, Body Mass Index - BMI, types of physical activity; way to practice and time of practice) and the participants means in the motives studied. The physical activity (PA) is defined as any bodily movement produced by skeletal muscles resulting in energy expenditure above the basal level. However, in the present study it was considered motivation for two types of PA: the physical exercises and sports. The Self-Determination Theory (SDT) underlay this research, once it has been used in the sportive context, beyond the facto of it was used as theoretical base to the development of MPAM-R. To attain the proposed goals, it was accomplished translations to Portuguese of the original English scale. Next, was carried out the semantic analysis and the judge analysis. For the empirical analysis of items, participated 309 practitioner of PA, classified in physical exercises practitioners and sports practitioners, with ages between 16 and 74 years, distributed equally by sex. They answered the final version in Portuguese of the MPAM-R and socio-demographic questions. The data was collected in Natal/RN, where the researcher approached people in some places where the PA is practiced, following she communicated that their involvement will be spontaneous and their responses will be confidential. The obtained results pointed the confirmation of the existence of five factors in the final version of the instrument, that was composed by 26 items that presented the following statistics indexes: x² (289) = 757.75, p < 0.000, x²/DF = 2.62, with GFI of 0.83, AGFI of 0.80 and RMSEA of 0.07. The reliability (Cronbach Alpha) of the complete instrument was 0.90, and the indexes of each factor were considered satisfactory too: Enjoyment (α = 0.88), Health (α = 0.84), Appearance (α = 0.79), Competence (α = 0.85) and Social (α = 0.75). It was observed that, in general, the main motive presented by the participants to practice PA was Health. It was verified yet, that women and aged had a higher mean in the Health factor; among the exercise practitioners was found a higher mean in the Appearance factor; and a higher mean in the Social factor was found among those that practice PA with accompaniment. It was concluded that the MPAM-R presented satisfactory psychometric parameters, became it useful in futures researches. Moreover, proposed the accomplishment of new studies that considered others variables to the intent of the better understanding of motivation to practice physical activity
Resumo:
In the design of a building process must consider climatic variations in the region, the external conditions and the use of available resources in nature, like the sun, vegetation, rain and winds, to provide a built environment with comfort and environment reduced energy expenditure. However, increasing urbanization, often with an occupancy of disordered ground comes disregarding this knowledge and disregarding local characteristics, drastically reducing the green areas. This disordered occupation associated with the reduction of green spaces, is modifying aspects of climate and thus, damaging the thermal comfort of users. Given this situation was born the question: What projetuais strategies can bring better thermal conditions to an educational building located in a region of hot and humid weather? Thus, faced with two important issues , education and environmental comfort , the research is justified by the fact that there is a large national demand for expansions and renovations in its public schools , but not in most areas provides students with quality for good learning development. This paper aims to draw up a project for establishment of Primary Education with the application of the concepts of bioclimatic, highlighting the use of vegetation as a regulatory element of the climate. Initially we carried out a literature search; we analyzed architectural solutions and set up the site. The next phases, called understanding, were raised with the laws, rules and environmental restrictions. Subsequently, the program needs and the development of architectural design was defined. The conclusion of this paper presents the definition of criteria and solutions for the use of vegetation to design of bioclimatic architecture in hot and humid climates and contributes a catalog of plant species for schools in the metropolitan region of Natal, RN.
Resumo:
In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste