Análise da eficácia de um refrigerador doméstico com condensador modificado: revestimento com meio poroso dissipativo

The development of home refrigerators generally are compact and economic reasons for using simplified configuration. The thermodynamic coefficient of performance ( COP ) is limited mainly in the condenser design for reasons of size and arrangement ( layout ) of the project ( design ) and climatic characteristics of the region where it will operate. It is noteworthy that this latter limitation is very significant when it comes to a country of continental size like Brazil with diverse climatic conditions. The COP of the cycle depends crucially on the ability of heat dissipated in the condenser. So in hot climates like the northeast, north, and west-central dispel ability is highly attenuated compared to the south and southeast regions with tropical or subtropical climates when compared with other regions. The dissipation in compact capacitors for applications in domestic refrigeration has been the focus of several studies, that due to its impact on reducing costs and power consumption, and better use of the space occupied by the components of refrigeration systems. This space should be kept to a minimum to allow an increase in the useful storage volume of refrigerator without changing the external dimensions of the product. Due to its low cost manufacturing, wire on tube condensers continue to be the most advantageous option for domestic refrigeration. Traditionally, these heat exchangers are designed to operate under natural convection. Not always, the benefits of greater compactness of capacitors for forced outweigh the burden of pumping air through the external heat exchanger. In this work we propose an improvement in convective condenser changing it to a transfer mechanism combined in series with conductive pipes and wire to a moist convective porous medium and the porous medium to the environment. The porous media used in the coating was composed of a gypsum plaster impregnated fiber about a mesh of natural cellulosic molded tubular wire mesh about the original structure of the condenser , and then dried and calcined to greater adherence and increased porosity. The proposed configuration was installed in domestic refrigeration system ( trough ) and tested under the same conditions of the original configuration . Was also evaluated in the dry condition and humidified drip water under natural and forced with an electro - fan ( fan coil ) convection. Assays were performed for the same 134- refrigerant charge e under the same thermal cooling load. The performance was evaluated in various configurations, showing an improvement of about 72 % compared with the original configuration proposed in humidification and natural convection.

Performance comparativa entre R290/R600a (50:50) e R134a para drop-in em refrigerador doméstico

This research this based on the seminar on Use of Natural Fluids in Refrigeration and Air-Conditioning Systems conducted in 2007 in Sao Paulo. The event was inserted in the National Plan for Elimination of CFCs, coordinated by the Ministry of Environment and implemented by the United Nations Development Programme (UNDP). The objective of this research is analyze the performance of the hydrocarbons application as zeotropic mixtures in domestic refrigerator and validate the application of technical standards for pull down and cycling (on-off) tests to the mixture R290/R600a (50:50) in domestic refrigerator. It was first developed an computational analysis of R290/R600a (50:50) compared to R134a and other mass fractions of the hydrocarbons mixtures in the standard ASHRAE refrigeration cycle in order to compare the operational characteristics and thermodynamic properties of fluids based on the software REFPROP 6.0. The characteristics of the Lorenz cycle is presented as an application directed to zeotropic mixtures. Standardized pull down and cycling (on-off) tests were conducted to evaluate the performance of the hydrocarbons mixture R290/R600a (50:50) as a drop-in alternative to R134a in domestic refrigerator of 219 L. The results showed that the use of R290/R600a (50:50) with a charge of refrigerant reduced at 53% compared to R134a presents reduced energy performance than R134a. The COP obtained with hydrocarbon mixture was about 13% lower compared to R134a. Pull down times in the refrigerator compartments for fluids analyzed were quite close, having been found a 4,7% reduction in pull down time for the R290/R600a compared to R134a, in the freezer compartment. The data indicated a higher consumption of electric current from the refrigerator when operating with the R290/R600a. The values were higher than about 3% compared to R134a. The charge of 40 g of R290/R600a proved very low for the equipment analyzed

Viabilidade do uso de secadores solar de convecção natural e forçada para a secagem do coco Licuri

Licuri is a palm tree from the semiarid regions of Bahia State, Brazil. It is an important source of food and feed in that region, since their nuts are commonly eaten by humans and used as maize substitute for poultry feeding. The aim of this dissertation is to study the feasibility for use of natural convection solar dryers and forced being compared with the traditional drying outdoors for drying coconut licuri Syagrus coronate. The study led to the construction of two prototype solar dryer for carrying out experiments proving: model Solar Drying System Direct Exposure to Natural Convection built with wood, has a drying chamber with direct cover transparent glass laminates 4 mm, using techniques for proper isolation of the drying chamber. The two prototypes were comparatively analyzed for performance and drying efficiency with traditional extractive use by the community. Were evaluated the variables: time and drying rates and quality of the final samples of coconut licuri. The fruits were harvested and brought the town of Ouricuri, in the city of Caldeirão Grande, BA for the experiments comparing the three methods of drying was used a standard load of 4.0 kg The quantitative analysis for the result of the drying rate was found in 74% yield and 44% for natural and forced convection respectively compared with the traditional drying. These drying rates represent variation 3-5 times lower. Drying using forced convection licuri showed better quality, was found in a reddish pulp, representing the quantities that were kept of the nutrient beta carotene, and not notice the flavor change from the previous system, the final cost of construction of this system were higher . The prototypes built competitive advantage and had testified fully to resolve the technical difficulties previously encountered in the production of products made of coconut licuri. Allowing add value and increase their potential use for the fruit extractive communities of semi-arid region of Bahia

Análise do desempenho de um refrigerador doméstico funcionando com uma válvula de expansão micrométrica

Household refrigerators are equipments that represent a significant portion on the eletricity consumption of Brazilian homes. The use of these devices with low energy efficiency contributes to increase the energy consumption. The energy efficiency of a refrigerator is a function of the interaction between the coolant fluid and the components of the thermodynamic cycle. Changes in load and/or nature of the coolant may modify the condensing and/or evaporation pressures. The volumetric capacity of the compressor, the mass flow of coolant and the compression power are dependent parameters of the condensation and evaporation pressures. Thus, the expansion devices exert an importante role in the balance of these pressures, being fundamental for the better performance of the refrigeration cycle. This experimental research aims to investigate the sensitivity of the performance parameters of a household refrigerator operating with R134a and at different evaporation pressures. Therefore, a small refrigerator was instrumented with temperature, pressure sensors and other variables of interest, installed along the cooling circuit, in order to allow the thermal mapping and the evaluation of the equipment performance parameters. The variation of pressure loss in the coolant fluid resulting from the operation of the expansion valve with micrometric adjustment that modifies the evaporation temperature, influencing significantly the performance parameters of the thermodynamic refrigeration cycle.

Análise do desempenho térmico de um sistema de aquecimento solar de baixo custo

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are low cost and easy manufacturing and assembly. The system operates under natural convection or thermosiphon. The absorbing surface of the collector is formed by twelve PVC pipes of 25 mm outside diameter connected in parallel via connections in T of the same material. The tubes were covered with absorbing fins made with recycled aluminum cans. We studied eight settings between absorber plate, thermal insulating EPS boards and thermal reservoirs 150 and 200 liters. It was determined the most efficient configuration for the correct purpose. We evaluated thermal parameters that proved the viability of the heating system studied

Estudo da secagem do pedúnculo do caju em sistemas convencional e solar: modelagem e simulação do processo

This work aims to study the drying of cashew-nut pulp with different lay-out of dryers using conventional and solar energy. It concerns with the use of exceeding of the regional raw material and the suitable knowledge for the applicability of the drying systems as pathway for food conservation. Besides, it used renewable sources as solar energy to dry these agroindustrial products. Runs were carried out using a conventional tray-dryer with temperature, air velocity control and cashew slice thickness of 55°C, 65°C, 75°C; 3.0; 4.5, 6.0 m s-1; 1.0; 1.5 and 2.0 cm, respectively, in order to compare the studied systems. To evaluate the conventional tray-dryer, it was used a diffusional model of 2nd Fick´s law, where the drying curves were quite well fitted to an infinite flat plate design. For the drying runs where the room temperature had no control, it was developed a phenomenological-mathematical model for the solar dryer with indirect radiation under natural and forced convection based on material and energy balances of the system. Besides, it was carried out assays in the in natura as well as dehydrated, statistic analysis of the experimental drying data, sensorial analysis of the final dry product and a simplified economical analysis of the systems studied

Análise de desempenho de um refrigerador de pequeno porte com drop in de refrigerantes hidrocarbonetos

From what was stated in the Montreal Protocol, the researchers and refrigeration industry seek substitutes for synthetic refrigerants -chlorofluorocarbons (CFCs) and HCFCs (HCFC) - that contribute to the depletion of the ozone layer. The phase-out of these substances was started using as one of the replacement alternatives the synthetic fluids based on hydro fluorocarbons (HFCs) that have zero potential depletion of the ozone layer. However, contribute to the process of global warming. HFC refrigerants are greenhouse gases and are part of the group of gases whose emissions must be reduced as the Kyoto Protocol says. The hydrocarbons (HC's), for not contribute to the depletion of the ozone layer, because they have very low global warming potential, and are found abundantly in nature, has been presented as an alternative, and therefore, are being used in new home refrigeration equipment in several countries. In Brazil, due to incipient production of domestic refrigerators using HC's, the transition refrigerants remain on the scene for some years. This dissertation deals with an experimental evaluation of the conduct of a drinking fountain designed to work with HFC (R-134a), operating with a mixture of HC's or isobutane (R-600a) without any modification to the system or the lubricating oil. In the refrigeration laboratory of Federal University of Rio Grande do Norte were installed, in a drinking fountain, temperature and pressure sensors at strategic points in the refrigeration cycle, connected to an acquisition system of computerized data, to enable the mapping and thermodynamics analysis of the device operating with R-134a or with a mixture of HC's or with R-600a. The refrigerator-test operating with the natural fluids (mixture of HC's or R-600a) had a coefficient of performance (COP) lower than the R-134a

Distribuição da fauna triatomínica e infecção natural pelo Trypanosoma cruzi em diferentes municípios do semiárido do Rio Grande do Norte

The triatomine fauna distribution and the natural infection by Trypanosoma cruzi was evaluated aiming the comprehension of the transmission dynamics of this parasite in the countryside of the State of Rio Grande do Norte. Additionally, the research for Trypanosoma rangeli was also investigated. The captures of triatomines were performed at sylvatic, peridomicile and domicile environments at different municipalities of the central and western mesoregions of this state. The insects were identified and examined by direct method, xenoculture and PCR to detect T. cruzi. The detection of T. rangeli was performed by direct examination of the hemolymph and multiplex PCR of 151 positive specimens for T. cruzi. Of 824 captured insects, the species were distributed in Triatoma brasiliensis (66.4%), Triatoma pseudomaculata (18.2%), Panstrongylus lutzi (12.7%) and Rhodnius nasutus (2.7%), and T. brasiliensis was found in most of the evaluated municipalities. The species were captured at nymph and adult stages, except P. lutzi, exclusively in adult stage. In the sylvatic environment were captured T. brasiliensis (57%), P. lutzi (28%) and T. pseudomaculata (15%) species. At the peridomicile environment were identified T. brasiliensis (74%), T. pseudomaculata (21%) and R. nasutus (5.0%), while in the intradomicile was found only T. brasiliensis. The infection rate of triatomines by T. cruzi was 30.4%, P. lutzi showed highest rate (78%), followed by T. brasiliensis (24.4%), T. pseudomaculata (22.6%) and R. nasutus (4.5%). Infected triatomines indexes at silvatic, peridomicile and domicile environments were of 41.8%, 20.1% and 50.0%, respectively. T. rangeli was only detected by multiplex PCR in 2.6% (4/151) of examined insects, of these 4.4% (3/67) were T. brasiliensis and 1.5% (1/63) P. lutzi species. The data showed that the positivity of P. lutzi allied to its ability to invade domicile attracted by light, suggests a likely participation of this insect between epidemiological transmission cycles of T. cruzi. T. brasiliensis was the only specie present in all environments, what reinforces its importance related to the capacity for adapting to the domestic environment, potential as a vector, and maintenance of sylvatic and domestic transmissions cycles in the semiarid, indicating the necessity of continuous epidemiological surveillance. The presence of T. rangeli in T. brasiliensis and P. lutzi was first recorded in rural zone of this State, broadening the area of occurrence of this protozoan in northeastern Brazil.

Distribuição da fauna triatomínica e infecção natural pelo Trypanosoma cruzi em diferentes municípios do semiárido do Rio Grande do Norte

The triatomine fauna distribution and the natural infection by Trypanosoma cruzi was evaluated aiming the comprehension of the transmission dynamics of this parasite in the countryside of the State of Rio Grande do Norte. Additionally, the research for Trypanosoma rangeli was also investigated. The captures of triatomines were performed at sylvatic, peridomicile and domicile environments at different municipalities of the central and western mesoregions of this state. The insects were identified and examined by direct method, xenoculture and PCR to detect T. cruzi. The detection of T. rangeli was performed by direct examination of the hemolymph and multiplex PCR of 151 positive specimens for T. cruzi. Of 824 captured insects, the species were distributed in Triatoma brasiliensis (66.4%), Triatoma pseudomaculata (18.2%), Panstrongylus lutzi (12.7%) and Rhodnius nasutus (2.7%), and T. brasiliensis was found in most of the evaluated municipalities. The species were captured at nymph and adult stages, except P. lutzi, exclusively in adult stage. In the sylvatic environment were captured T. brasiliensis (57%), P. lutzi (28%) and T. pseudomaculata (15%) species. At the peridomicile environment were identified T. brasiliensis (74%), T. pseudomaculata (21%) and R. nasutus (5.0%), while in the intradomicile was found only T. brasiliensis. The infection rate of triatomines by T. cruzi was 30.4%, P. lutzi showed highest rate (78%), followed by T. brasiliensis (24.4%), T. pseudomaculata (22.6%) and R. nasutus (4.5%). Infected triatomines indexes at silvatic, peridomicile and domicile environments were of 41.8%, 20.1% and 50.0%, respectively. T. rangeli was only detected by multiplex PCR in 2.6% (4/151) of examined insects, of these 4.4% (3/67) were T. brasiliensis and 1.5% (1/63) P. lutzi species. The data showed that the positivity of P. lutzi allied to its ability to invade domicile attracted by light, suggests a likely participation of this insect between epidemiological transmission cycles of T. cruzi. T. brasiliensis was the only specie present in all environments, what reinforces its importance related to the capacity for adapting to the domestic environment, potential as a vector, and maintenance of sylvatic and domestic transmissions cycles in the semiarid, indicating the necessity of continuous epidemiological surveillance. The presence of T. rangeli in T. brasiliensis and P. lutzi was first recorded in rural zone of this State, broadening the area of occurrence of this protozoan in northeastern Brazil.