Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Projeto de um edifício para fins educacionais com foco na racionalização do consumo de água

The urban growth without the prior infrastructure has caused many environmental impacts such as the damage to quality of the water resources in the cities. Along with natural scarcity in some regions, this is one of the factors that limit the availability of drinking water. As a result, the conservation of drinking water is becoming one of the major concerns in sustainable architectural projects. Within this context, this dissertation proposes to develop the design of an educational building focusing on water consumption rationalization. The proposed project is located in UFRN Campus at Currais Novos, an area of warm and dry climate and low rainfall. The proposal seeks to integrate ways to reduce water consumption o to architecture, in order to exploit the advantages and savings. After quantifying the benefits achieved, it was concluded that it is possible to reduce significantly the drinking water consumption in educational buildings in universities using three principles: reduction the water consumption at the point of use, replacement of the water source and internal recycling. Calculations and simulations indicated that the proposed building may have water consumption up to 56% lower than if it would be provided by conventional facilities. Rationalization of water consumption brings direct and indirect benefits, with influences on the environmental, social and economic fields

Mapeamento cromossômico de genes ribossomais em espécies estuarinas da família Gerreidae Identificação de uniformidade cariotípica e sua empregabilidade com fins biotecnológicos - REPROGEN

Perciformes are dominant in the marine environment, characterized as the largest and most diverse fish group. Some families, as Gerreidae, popularly known as silver jennies, carapebas, or mojarras have a high economic potential to marine fish farming, natural explotation and game fishing. Genetic information of these species are of fundamental importance for their management and production. Despite exist over 13,000 marine fish species described, only 2% were cytogenetically analyzed and less than 1% have some reproductive characteristics known. Induced breeding, cytogenetic characterization and cryopreservation of gametes, represent important areas in applied fish studies. In this project cytogenetic analyzes were performed to acess genetic aspects of Gerreidae species, distributed in coastal and estuarine regions of Northeast Brazil. Different methods for identifying chromosomal regions were employed using conventional techniques (Ag-NORs, C-banding), staining with base-specific fluorochromes (DAPI-CMA3), and physical mapping of ribosomal genes 18S and 5S rDNA, through hybridization in situ with fluorescent probes (FISH). The six species analyzed showed remarkable chromosome conservatism. The 18S and 5S ribosomal genes when analyzed in phylogenetic perspective demonstrate varied evolutionary dynamics, suggesting ocurrence of stasis process in some groups and greater dynamism in others. Double FISH with 18S and 5S probes showed both how efficient cytotaxonomic markers in the homogeneous karyotypes of this group of species. The karyotypic pattern identified in addition to the evolutionary aspects of karyotype, are suggestive of existence of low potential of post-zygotic barrier, prompting further research to prospect for artificial interspecific hybridization of these species of commercial importance

Gestão estratégica no terceiro setor: uma análise comparativa da construção de mapas estratégicos de organizações sem fins lucrativos

The strategy has an important role in organizations by identifying factors that need to be emphasized to organizational success and strategic map currently contemplates as a preview of organizational strategy, prepared from your planning. Third sector organizations need to take a competitive posture, establishing a sustainable position and maximizing the use of resources towards their social or humanitarian goals. This research aims to investigate the process of building strategic maps of two non-profit organizations by identifying and characterizing the steps common to these organizations. The research is characterized as qualitative descriptive and applied knowledge. Developed from bibliographical reviews and participant observation gathered in a case study, the data was collected in two third sector organizations and the results show that how to conduct the process may influence directly on your result lists. Among the steps identified, emphasis can be given to the formation of a team, the definition of strategy, the definition of strategic objectives, the gathering of those goals into perspective and the identification of the cause-effect relationship that relate. Marked as optional, but effective, conducting an event outside the premises of the company to complete the process, or any portion thereof. However, stands out as essential the active participation of senior management in the process, as a way to give credit to the initiative. These steps, its characteristics and its factors are described from comparisons between the processes adopted by the organizations surveyed

Gestão de organizações sem fins lucrativos: uma avaliação de desempenho através do balanced scorecard

The methodology Balanced Scorecard (BSC) focuses on the major critical issues of modern organizations, whether with or without profit. The measurement of the effective performance of the latter is by evaluating the successful implementation of organizational strategy. The aim of this paper is to present the development of a system of performance measurement strategy for a nonprofit organization, whose object of study is the Associação de Apoio as Comunidades do Campo - AACC, in the context of the BSC methodology of Kaplan and Norton. The methodology of this case study is an exploratory, descriptive and qualitative, and diagnose the coherence of the Strategy Map in an organization, based strategic planning from 2010 to 2012. Initially conducted a literature review covering the main aspects of strategy maps and performance evaluation involving the translation of the BSC and strategy evaluation. The main results of the proposed approach refers to evaluation of overall scores for each dimension of the BSC methodology, financial, customer, internal processes, learning and growth. These results are able to help the organization evaluate and revise their strategy and, in general, to adopt management methods more accurately. Data collection is centered on interviews with semi-structured questionnaire. The findings highlight on balancing and alignment of strategic objectives, low causality map, strategic communication insufficient and fragmented. For interviewees organizational culture is the biggest impediment to structuring a management model based on indicators and strategic process should be initiated by non-financial indicators gradually. The performance indicators of the AACC/RN portray more meritocracy operational procedures of social projects in the context of the Strategic Map determined in a shortterm over the long term. However, there is evidence of improved performance management and strategic taken as a basis of planning as both the strategic map structured. Therefore, the nonprofits need to adopt a form of management that enables planning, setting objectives and targets that provide the continuity of its activities, and generating instruments that can measure the financial performance and non-financial, in order to develop strategic actions for growth and sustainability

Viabilidades térmica, econômica e de materiais de um sistema solar de aquecimento de água a baixo custo para fins residenciais

An solar alternative system for water heating is presented. Is composed for one low cost alternative collector and alternative thermal reservoir for hot water storing. The collector of the system has box confectioned in composite material and use absorption coils formed for PVC tubes. The box of hot water storage was confectioned from a plastic polyethylene drum used for storage of water and garbage, coated for a cylinder confectioned in fiber glass. The principle of functioning of the system is the same of the conventionally. Its regimen of work is the thermosiphon for a volume of 250 liters water. The main characteristic of the system in considered study is its low cost, allowing a bigger socialization of the use of solar energy. It will be demonstrated the viabilities thermal, economic and of materials of the system of considered heating, and its competitiveness in relation to the available collectors commercially. Relative aspects will be boarded also the susceptibility the thermal degradation and for UV for the PVC tubes. It will be shown that such system of alternative heating, that has as main characteristic its low cost, presents viabilities thermal, economic and of materials

Extração do óleo e caracterização dos resíduos da borra de petróleo para fins de reuso

The petroleum industry, in consequence of an intense activity of exploration and production, is responsible by great part of the generation of residues, which are considered toxic and pollutants to the environment. Among these, the oil sludge is found produced during the production, transportation and refine phases. This work had the purpose to develop a process to recovery the oil present in oil sludge, in order to use the recovered oil as fuel or return it to the refining plant. From the preliminary tests, were identified the most important independent variables, like: temperature, contact time, solvents and acid volumes. Initially, a series of parameters to characterize the oil sludge was determined to characterize its. A special extractor was projected to work with oily waste. Two experimental designs were applied: fractional factorial and Doehlert. The tests were carried out in batch process to the conditions of the experimental designs applied. The efficiency obtained in the oil extraction process was 70%, in average. Oil sludge is composed of 36,2% of oil, 16,8% of ash, 40% of water and 7% of volatile constituents. However, the statistical analysis showed that the quadratic model was not well fitted to the process with a relative low determination coefficient (60,6%). This occurred due to the complexity of the oil sludge. To obtain a model able to represent the experiments, the mathematical model was used, the so called artificial neural networks (RNA), which was generated, initially, with 2, 4, 5, 6, 7 and 8 neurons in the hidden layer, 64 experimental results and 10000 presentations (interactions). Lesser dispersions were verified between the experimental and calculated values using 4 neurons, regarding the proportion of experimental points and estimated parameters. The analysis of the average deviations of the test divided by the respective training showed up that 2150 presentations resulted in the best value parameters. For the new model, the determination coefficient was 87,5%, which is quite satisfactory for the studied system

Síntese e caracterização do carbeto de molibdênio nanoestruturado para fins catalíticos na reação de oxidação parcial do metano

The nanostructures materials are characterized to have particle size smaller than 100 nm and could reach 1 nm. Due to the extremely reduced dimensions of the grains, the properties of these materials are significantly modified relatively when compared with the conventional materials. In the present work was accomplished a study and characterization of the molybdenum carbide, seeking obtain it with particles size in the nanometers order and evaluate its potential as catalyst in the reaction of partial methane oxidation. The method used for obtaining the molybdenum carbide was starting from the precursor ammonium heptamolybdate of that was developed in split into two oven, in reactor of fixed bed, with at a heating rate of 5ºC/min, in a flow of methane and hydrogen whose flow was of 15L/h with 5% of methane for all of the samples. The studied temperatures were 350, 500, 600, 650, 660, 675 and 700ºC and were conducted for 0, 60, 120 and 180 minutes, and the percent amount and the crystallite size of the intermediate phases were determined by the Rietveld refinement method. The carbide obtained at 660ºC for 3 hours of reaction showed the best results, 24 nm. Certain the best synthesis condition, a passivating study was accomplished, in these conditions, to verify the stability of the carbide when exposed to the air. The molybdenum carbide was characterized by SEM, TEM, elemental analysis, ICP-AES, TG in atmosphere of hydrogen and TPR. Through the elemental analysis and ICP-AES the presence carbon load was verified. TG in atmosphere of hydrogen proved that is necessary the passivating of the molybdenum carbide, because occur oxidation in room temperature. The catalytic test was accomplished in the plant of Fischer-Tropsch of CTGAS, that is composed of a reactor of fixed bed. Already the catalytic test showed that the carbide presents activity for partial oxidation, but the operational conditions should be adjusted to improve the conversion

Caracterização de água produzida na indústria de petróleo para fins de descarte e otimização do processo de separação óleo/água

The oil industry has several segments that can impact the environment. Among these, produced water which has been highlight in the environmental problem because of the great volume generated and its toxic composition. Those waters are the major source of waste in the oil industry. The composition of the produced water is strongly dependent on the production field. A good example is the wastewater produced on a Petrobras operating unit of Rio Grande do Norte and Ceará (UO-RNCE). A single effluent treatment station (ETS) of this unit receives effluent from 48 wells (onshore and offshore), which leads a large fluctuations in the water quality that can become a complicating factor for future treatment processes. The present work aims to realize a diagnosis of a sample of produced water from the OU - RNCE in compliance to certain physical and physico-chemical parameters (chloride concentration, conductivity, dissolved oxygen, pH, TOG (oil & grease), nitrate concentration, turbidity, salinity and temperature). The analysis of the effluent is accomplished by means of a MP TROLL 9500 Multiparameter probe, a TOG/TPH Infracal from Wilks Enterprise Corp. - Model HATR - T (TOG) and a MD-31 condutivimeter of Digimed. Results were analyzed by univariated and multivariated analysis (principal component analysis) associated statistical control charts. The multivariate analysis showed a negative correlation between dissolved oxygen and turbidity (-0.55) and positive correlations between salinity and chloride (1), conductivity, chloride and salinity (0.70). Multivariated analysis showed there are seven principal components which can explain the variability of the parameters. The variables, salinity, conductivity and chloride were the most important variables, with, higher sampling variance. Statistical control charts have helped to establish a general trend between the physical and chemical evaluated parameters

Síntese e caracterização de tungstatos de cério e estrôncio para fins catalíticos

The main goal of this work was to produce nanosized ceramic materials of the family of the tungstates (tungstates of cerium and strontium), and test them for their catalytic activity in processes involving the transformation of methane (CH4). The methodology used for the synthesis of the ceramic powders involved the complexation combining EDTA-citrate. The materials characterization was performed using simple and differential thermogravimetry, x-ray diffraction, transmission electron microscopy, and energy dispersive spectroscopy (EDS). The microstructure analysis was performed using the refinement by the Rietveld method, and the crystallite size and distribution of the materials was elucidate by the Scherrer and Williamson-Hall methods. The conditions of the synthesis process for the three envisaged materials (SrWO4, SrWO4 using tungsten oxide concentrate as raw material, and Ce2(WO4)3) were adjusted to obtain a single phase crystalline material. The catalytic tests were carried out in the presence of methane and synthetic air, which is composed of 21% O2 and 79% N2. The analysis of the conversion of the reaction was done with the aid of an fourier transform infrared device (FTIR). The analysis showed that, structurally, the SrWO4 produced using raw materials of high and poor purity (99% and 92%, respectively) are similar. The ideal parameters of calcination, in the tested range, are temperature of 1000 °C and time of calcination 5 hours. For the Ce2(WO4)3, the ideal calcination time and are temperature 15 hours and 1000°C, respectively. The Williamson-Hall method provided two different distributions for the crystallite size of each material, whose values ranged between the nanometer and micrometer scales. According to method of Scherrer, all materials produced were composed of nanometric crystallites. The analyses of transmission electron microscopy confirmed the results obtained from the Williamson- Hall method for the crystallite size. The EDS showed an atomic composition for the metals in the SrWO4 that was different of the theoretical composition. With respect to the catalytic tests, all materials were found to be catalytically active, but the reaction process should be further studied and optimized.

Estudo da funcionalidade de espécies comestíveis do semiárido nordestino e estratégias para sua utilização como ingredientes para fins alimentícios

The Brazilian caatinga is characterized by low annual rainfall and arid soils. Several cactaceae, either native or adapted species, grow in this semi-arid region, including the prickly pear (Opuntia fícus indica) and facheiro ((Philosocereus pachycladus Ritter) which produce underexploited edible fruits. In addition to these species, the algaroba is a leguminous with little studied technological applications and bioactive potential so far. Therefore, this research aims to investigate the physicochemical, bioactive and functional attributes of the prickly pear and facheiro fruit pulps and the algaroba flour. Specifically, this study approaches the physicochemical characterization, total phenolic compounds (TPC) and the betalain identification and quantification by HPLC-DAD-ESI-MS. It is also investigated the DPPH antioxidant capacity and the antienzymatic activities against alpha-amylase and alphaglucosidase of water and ethanolic extracts of these food material. In order to address their potential to be used as food ingredients, juice blends prepared with mixtures of cajá and prickly pear, biofilms with facheiro and cereal bars with algaroba flour were elaborated and analyzed. The prickly pear fruits presented low acidity and high sugar content when compared to facheiro. The Philosocereus pachycladus Ritter fruits had higher protein and ash content, but the algaroba flour was the species with higher protein and sugar content among all. The algaroba flour also presented outstanding food fiber content, which reveals its potentiality to be used as a natural intestinal regulator. The TPC of water and ethanol extracts ranged from 3.87 to 16.21 mg GAE/100g for algaroba flour, 79.24 to 110.20 GAE/ 100g for prickly pear and 412.23 to 539.14 mg GAE/100g for facheiro. The 70% (w/v) ethanol extract reached the highest DPPH antioxidant activity, which was linearly correlated to its high TPC content. In regard to the enzymatic inhibitory activities, the best performance was observed for the prickly pear extracts which presented a moderate inhibition for both investigated enzymes, but interestingly, no alpha-glucosidase inhibition was observed for facheiro extracts. This work shows, for the first time in the literature, the functional attributes of facheiro fruits, as well as the presence of betacianins and isobetanin in the pulp of this exotic fruit. When it comes to the food products developed here, the sensory attributes that better described the juice blend cajá-prickly pear were sweetness, acidity, color yellow-orange, body, turbidity and cajá flavor. The discriminative test applied for cereal bars produced with and without algaroba revealed that the texture was the only sensory attribute that differed (p<0.05) between these two samples. It was also observed that the addition of facheiro extracts did not influence the visual characteristics of the biofilms. Overall, this work unveils the physicochemical and bioactive attributes of these commercial and technologically underexploited species widely found in the Brazilian caatinga and presents alternatives for their rational use

Análise de necessidades de inglês para fins específicos em um curso de graduação em turismo

This study presents the results of a survey conducted in the area of English for Specific Purposes (ESP) in order to identify (1) the learning needs of students in a course in Tourism, their desires and lacks, at a federal university, with respect to use of English; (2) the needs of the present situation of teachers and the coordinator of that course as to the language; (3) the needs of the target situation of professionals (graduates) and companies with respect to this language. This research is a case study (STAKE, 1998; YIN, 2009) and was used for data collection, instruments such as questionnaires, semi-structured interviews, and document on the Tourism Course. To this end, it was adopted the theoretical basis for the constructs of English for Specific Purposes (ESP) Inglês para Fins Específicos (IFE) in Brazil, also known as Inglês Instrumental, whose foundation is based on the work by Hutchinson and Waters (1987), Robinson (1991), Dudley-Evans and St. John (1998), Celani, Deyes, Holmes, Scott (2006), among others, since this work is devoted to a specific area, Tourism. Results show that students opined the ability to prioritize reading and speaking into the classroom. Professionals reported that the latter is an indispensable tool for entering the labor market, yet they feel unprepared and need to attend English language courses in private language schools. The testimony of company executives also point to this deficiency. Finally, the present situation of teachers reveals that, while advocating the use of English in the classroom, this is not because students prefer their mother tongue. There is also an evident lack of needs analysis. Eventually, the coordinator said that there is some uncertainty as to the methodology, content and language skills worked, and the lack of interaction among teachers of English. It was concluded, therefore, it is important to conduct a needs analysis so that one can redesign a course that meets the different contextual needs: students, teachers, coordination, represented by the institutional needs, and the labor market

Histórias de professores universitários sobre ensinar inglês para fins específicos

This research has as its theoretical and methodological assumptions (1) the Narrative Inquiry (CLANDININ; CONNELLY, 2011), (2) the Systemic Functional Grammar (HALLIDAY, 1985, 1994; THOMPSON, 2002; EGGINS, 1994; HALLIDAY; MATTHIESSEN, 2004) and (3) the English for Specific Purposes Approach (ESP - HUTCHINSON; WATERS, 1987; CELANI, 2005; RAMOS, 2005), and its overall objective is to survey the meanings construed by the participants who are ESP practitioners and have not received a specific education to teach this approach at their undergraduation. The field texts and therefore the analises were divided into two distinct groups: the first with data generated from a questionnaire applied to nine professors from a federal university in the northeast of Brazil, which contains open and closed questions about their training and their experiences in teaching ESP; the second group, focusing this time on the experiences of three professors from the first group who were still teaching ESP, with data generated from interviews with these participants in addition to the data generated from their autobiographies and from the researcher´s as well. The computational tool WordSmith Tools 6.0 (SCOTT, 2012) was used to select, organize, and quantify data to be analyzed in the first group of texts, identifying the types of Processes and Participants through the Transitivity System (HALLIDAY; MATTHIESSEN, 2004). The Processes which were more used by the professors in the questionnaire were the Material, followed by the Relational and then the Mental ones, indicating that most professors reported their actions related to the teaching of ESP, rated or evaluated the approach, their training to teach it and their experiences, hence, rarely showing their thoughts and emotions about teaching ESP. Most of the nine professors say they carry out needs analysis, but not all do it according to the authors cited by them or the ones that are considered a reference in this area, such as the ones used in this research as reference. Similarly, their definitions and conceptions of ESP, in most cases, differed from these authors. All the professors claim not having had specific education to teach ESP at the undergraduation. When examining the stories of the four teachers, in the second group of the field texts, based on meaning composition according to Ely, Vinz, Downing and Anzul (2001), it was revealed that the kind of knowledge they report using when they teach ESP is related to their Personal Practical Knowledge and their Professional Knowledge (ELBAZ, 1983; CLANDININ, 1988). In their autobiographies, metaphors were also identified and they represent their concepts of teaching and being a teacher. Through this research, we hope to contribute to the understanding of what teaching ESP might mean for professors in the researched context and also to the continuing education of ESP practitioners, as well as to a review of the curricula in the English language undergraduate courses and of the role of ESP in the training of these professionals