Utilização da macroalga Ulva lactuca linnaeus na redução de nutrientes (NH4+,NO3- e PO4-2) provenientes da carcinicultura

Dentre as macroalgas capazes de absorver altas concentrações de N e P dissolvidos na água, destaca-se a Chlorophyta Ulva lactuca, bastante adaptável e resistente às adversidades ambientais, como grandes variações de temperatura, salinidade, matéria orgânica e metais pesados. Trata-se também de uma espécie bastante comum nas áreas intertidais do litoral norte-riograndense. Devido a suas características ecológicas, fisiológicas e nutricionais, foi avaliado nesse estudo, o seu potencial como biofiltro na redução de NH4+, NO3- e PO4-2, tanto em condições controladas como também em um viveiro de camarão. No experimento laboratorial, foram utilizados quatro aquários de vidro de 30 x 20 x 20cm com 10L de água, sendo três aquários experimentais contendo 20g de U. lactuca e um controle. O acréscimo de biomassa foi de 2,92g (22,92 ± 6,29g; p < 0,05) em relação ao inóculo inicial de 20g, sob temperatura (28,50 ± 0,58ºC), salinidade (35,00 ± 0,00 ), pH (8,26 ± 0,02) e luz constante (250 μmol.m2s-1). O crescimento positivo (1,78 ± 4,38%dia-1; p < 0,05), juntamente com a alta eficiência de absorção de amônio (83%; p < 0,001), nitrato (83%; p < 0,001) e ortofosfato (53%; p < 0,001), demonstrou que, nessas condições, a Ulva lactuca absorveu os nutrientes e aumentou sua biomassa. Já no experimento de campo, realizado na fazenda TECNARÃO, situada no município de Arez/RN (06° 11 40 Latitude Sul, e 35º 09 37 Longitude Oeste), foram utilizadas três gaiolas de PVC, posicionadas a 12cm da superfície da água, cada uma com dimensões de aproximadamente 59 x 59 x 15cm, onde foram colocadas 200g de U. lactuca. O ganho de biomassa de 3g (203,00 ± 41,02g; p < 0,001) foi muito semelhante às condições controladas, demonstrando a adaptabilidade da espécie em condições ambientais variáveis, onde, apesar da temperatura pouco variável (27,45 ± 0,64ºC), houve progressiva diminuição de salinidade (25 - 15 ), devido ao período de fortes chuvas (34,70 ± 23,78mm). Somado a isso, foram observados vários fatores biológicos interferindo no viveiro, como a presença de epífitas, organismos endofíticos, fouling e a herbivoria por parte dos próprios camarões. Houve aumento nas concentrações de NH4+ (4,36 ± 1,69 μmol.L-1), NO3- (0,17 ± 0,25μmol.L-1) e PO4-2 (0,41 ± 0,13μmol.L-1), coincidindo com o crescimento da espécie até a terceira semana. Todos os parâmetros ambientais analisados, assim como a biomassa e a Taxa de Crescimento Relativo (TCR), obtidos no campo, apresentaram variações altamente significativas (p < 0,001). As correlações observadas entre biomasa e NH4+ (r = 0,82; p < 0,001) e entre biomassa e PO4-2 (r = 0,87; p < 0,001), indicam que esta espécie é capaz de ter um crescimento satisfatório nas condições eutróficas de um viveiro de camarão, sendo possível seu uso como biofiltro.

Efeitos da microgravidade em plantas de cana-de-açúcar

Sugarcane (Saccharum spp.) is a plant from Poaceae family that has an impressive ability to accumulate sucrose in the stalk, making it a significant component of the economy of many countries. About 100 countries produce sugarcane in an area of 22 million hectares worldwide. For this reason, many studies have been done using sugarcane as a plant model in order to improve production. A change in gravity may be one kind of abiotic stress, since it generates rapid responses after stimulation. In this work we decided to investigate the possible morphophysiological, biochemical and molecular changes resulting from microgravity. Here, we present the contributions of an experiment where sugarcane plants were submitted to microgravity flight using a vehicle VSB-30, a sounding rocket developed by Aeronautics and Space Institute teams, in cooperation with the German Space Agency. Sugarcane plants with 10 days older were submitted to a period of six minutes of microgravity using the VSB-30 rocket. The morphophysiological analyses of roots and leaves showed that plants submitted to the flight showed changes in the conduction tissues, irregular pattern of arrangement of vascular bundles and thickening of the cell walls, among other anatomical changes that indicate that the morphology of the plants was substantially influenced by gravitational stimulation, besides the accumulation of hydrogen peroxide, an important signaling molecule in stress conditions. We carried out RNA extraction and sequencing using Illumina platform. Plants subjected to microgravity also showed changes in enzyme activity. It was observed an increased in superoxide dismutase activity in leaves and a decreased in its activity in roots as well as for ascorbate peroxidase activity. Thus, it was concluded that the changes in gravity were perceived by plants, and that microgravity environment triggered changes associated with a reactive oxygen specie signaling process. This work has helped the understanding of how the gravity affects the structural organization of the plants, by comparing the anatomy of plants subjected to microgravity and plants grown in 1g gravity

Análise de falhas em martelos oscilantes dos desfibradores da indústria sucroalcooleira da Região Norte-Nordeste

The failure of materials is always an unwelcome event for several reasons: human lives are put in danger, economic losses, and interference in the availability of products and services. Although the causes of failures and behaviour of materials can be known, the prevention of such a condition is difficult to be guaranteed. Among the failures, wear abrasion by the low voltage is the kind of failure that occurs in more equipment and parts industry. The Plants Sucroalcooleiras suffer significant losses because of such attrition, this fact that motivated their choice for the development of this work. For both, were considered failures in the swing hammers desfibradores stopped soon after the exchange provided in accordance with tonnage of cane processed, then were analyzed by the level of wear testing of rubber wheel defined by the standard ASTM G65-91.The failures were classified as to the origin of the cause and mechanism, moreover, were prepared with samples of welding procedures according to ASME code, sec. IX as well, using the technique of thermal spraying to analyze the performance of these materials produced in laboratories, and compares them with the solder used in the plant. It was observed that the bodies-of-proof prepared by the procedure described as welding, and the thermal spraying the results of losing weight have been minimized significantly compared to the preparations in the plant. This is because the use of techniques more appropriate and more controlled conditions of the parameters of welding. As for the thermal spraying, this technique has presented a satisfactory result, but requires the use of these coatings in the best condition for real affirmation of the results

Avaliação de parâmetros de estresse oxidativo em plantas de cana-de-açúcar tratadas com peróxico de hidrogênio

The genus Saccharum belongs to Poaceae family. Sugarcane has become important monocultures in Brazil due to their products: ethanol and sugar. The production may change between different regions from Brazil. This difference is related to soil, climatic conditions and temperature that promotes oxidative stress that may induce an early flowering. The aim of this work was to identify the effects of oxidative stress. In order to analyse this, sugarcane plants were submitted to oxidative stress using hydrogen peroxide. After this treatment, the oxidative stress were analyzed Then, the plant responses were analyzed under different approaches, using morphophysiological, biochemical and molecular tools. Thus, sugarcane plants were grown under controlled conditions and until two months they were subjected first to a hydroponics condition for 24 hours in order to acclimation. After this period, these plants were submitted to oxidative stresse using 0 mM, 10 mM, 20 mM and 30 mM hydrogen peroxide during 8 hours. The histomorphometric analysis allowed us to verify that both root and leaf tissues had a structural changes as it was observed by the increased in cell volume, lignin accumulation in cell walls. Besides, this observation suggested that there was a change in redox balance. Also, it was analyzed the activity of the SOD, CAT and APX enzymes. It was observed an increase in the SOD activity in roots and it was also observed a lipid peroxidation in leaves and roots. Then, in order to identify proteins that were differently expressed in this conditions it was used the proteomic tool either by bidimensional gel or by direct sequencing using the Q-TOF EZI. The results obtained with this approach identified more than 3.000 proteins with the score ranging from 100-5000 ions. Some of the proteins identified were: light Harvesting; oxygenevolving; Thioredoxin; Ftsh-like protein Pftf precusor; Luminal-binding protein; 2 cys peroxiredoxin e Lipoxygenase. All these proteins are involved in oxidative stress response, photsynthetic pathways, and some were classified hypothetical proteins and/or unknown (30% of total). Thus, our data allows us to propose that this treatment induced an oxidative stress and the plant in response changed its physiological process, it made changes in tissue, changed the redox response in order to survival to this new condition

Elaboração e validade do teste de rastreio de doença da Alzheimer com provérbios (TRDAP) para indivíduos a partir de sessenta anos

A escassez de instrumentos para a avaliação e a triagem da doença de Alzheimer, (DA), notadamente denominados de rastreio, com características de padronização e validados para o Nordeste, motivou este Estudo. Visando à triagem de uma etapa mais leve da doença e encaminhamento precoce ao tratamento multidisciplinar foi elaborado o Teste de Rastreio da Doença de Alzheimer com Provérbios (TRDAP), a partir de um Jogo de Memória de Provérbios, construído como recurso terapêutico ocupacional. Está composto de três etapas conforme a função neuropsicológica avaliada, a A (memória de curto prazo), B (funções executivas e linguagem) e C (memória episódica), além do reconhecimento de provérbios. O Estudo foi realizado em uma amostra de conveniência, com 91 idosos (28 DA e 63 controles), a partir de 60 anos, com um ou mais anos de escolaridade. Foram controladas as variáveis, como doenças intercorrentes ou déficits sensoriais que pudessem comprometer o desempenho dos pacientes, nos testes. O protocolo constou de oito testes selecionados por especialistas: Miniexame do Estado Mental (para validade convergente), Escala de Depressão Geriátrica EDG (validade discriminante), Lista de Palavras, Fluência Verbal, Span de Dígitos, Figura Neuropsi, Teste do Relógio, Atividade de Vida Diária e Instrumental. Os resultados confirmaram a validade de construto convergente e discriminante, assim como a relação significativa (p<0,005) com todos os testes, exceto com o EDG. Quanto à validade concorrente, não houve discordância com o critério da avaliação médica observou-se consistência interna aceitável, conferindo confiabilidade no instrumento, o que não ocorreu com MEEM. Tais resultados permitem afirmar que o TRDAP possui características psicométricas, adequadas ao rastreio da fase leve da DA para população estudada

Zinco Sérico e parâmetros farmacocinéticos na determinação do estado corporal de zinco em crianças

O zinco é um micronutriente fundamental para as funções vitais de qualquer organismo vivo e sua deficiência em humanos pode causar alterações na expressão gênica, crescimento e desenvolvimento infantil, e proteção antioxidante. Devido à sua importância, as concentrações corporais de zinco são estritamente controladas por processos homeostáticos complexos. Este controle reflete no fato da deficiência grave de zinco ser detectada apenas após privação crônica. Embora se estime que a deficiência leve seja comum, os métodos existentes para avaliação individual do estado corporal de zinco são limitados e pouco eficazes. O objetivo deste trabalho foi avaliar o zinco sérico basal e os parâmetros farmacocinéticos na determinação do estado corporal de zinco em crianças, estabelecendo relação entre esses índices. O estudo foi aprovado pelo Comitê de Ética em pesquisa do Hospital Universitário Onofre Lopes (CEP-HUOL) e 129 crianças, eutróficas e aparentemente saudáveis, entre 6 e 9 anos de idade, foram avaliadas antes e após a suplementação oral de zinco (5 mg Zn/dia) durante 3 meses. No início e fim do período houve a administração venosa de zinco (0,06537 mg de Zn/kg de peso) em 40 destas crianças para avaliação dos parâmetros farmacocinéticos por meio de três diferentes fórmulas de clearance de zinco. Os limites do CI (95%) para o zinco sérico basal variaram entre 0,94 1,00 e 0,91 0,98 μg/mL em meninas e meninos, respectivamente. Em relação aos parâmetros farmacocinéticos, a fórmula específica para um compartimento apresentou correlação positiva com o zinco sérico após a suplementação e foi efetiva em detectar mudanças no estado corporal de zinco

Associação dos níveis de motivação e autoestima na aderência à prática de atividade física de universitários

A aderência à prática da atividade física se constitui na maior dificuldade encontrada pelos profissionais da área da saúde. É importante ter conhecimento de determinantes que podem influenciar na aderência. Os objetivos do presente estudo foram o de elaborar, desenvolver e validar uma escala para avaliar a Autoestima referenciada na aderência da prática da atividade física e verificar a associação da Motivação e Autoestima à prática de atividade física. A Escala de Autoestima proposta para validação é uma escala de auto-resposta com dezesseis itens, cinco dimensões e com respostas com três níveis de concordância. Os participantes no estudo de validação são 312 universitários de ambos os sexos, com idades compreendidas entre 18 e 35 anos. Metade deles é praticante regular de atividade física. A Análise Fatorial dos itens mostra cinco dimensões: Introspecção, Imagem Física, Satisfação com a vida, Aceitação e Confiança. As propriedades psicométricas são aceitáveis, com Alfa de Cronbach igual a 0,75. O estudo de validação baseado nas correlações entre esta escala e a de Rosenberg, segundo o teste Qui-quadrado de Pearson, com sig. p < 0, 001 nas classificações e na correlação sugere que a escala pode ser utilizada em estudos de investigação e programas de promoção da saúde. As escalas de Autoestima e de Motivação (MPAM-R) foram aplicadas a um grupo de 110 universitários, 65% do sexo feminino e 35% do sexo masculino, com idade média compreendida entre 18 e 35 anos. Segmentados em dois grupos de praticantes regulares e não regulares de atividade física. Foram controladas as variáveis demográficas, ambientais e antropométricas. Verificou-se associação significativa entre as variáveis Autoestima e Motivação pelo teste Qui-Quadrado, e que denotam que a dimensão da Autoestima Imagem Física, quando cruzada com as dimensões da Motivação, mostra-se em alto grau discricionário e associação direta. Motivação Diversão (sig.p = 0,002), Competência (sig.p = 0.007) e Social (sig.p = 0.016). Ainda, no cruzamento do Escore Total da dimensão Autoestima e a dimensão Diversão da variável Motivação, apresenta associação diretas e significativas (sig.p = 0.020). A síntese dos resultados denota ações combinadas de estímulo na melhora da percepção positiva da Imagem Física do indivíduo, tendo como plano de fundo, ambiente divertido, desafiador (competência) e social (interação com os pares), traduz em aderência a prática da Atividade Física

Mobilização de reservas e partição de metabólitos durante a germinação da semente e o estabelecimento da plântula em moringa

Seed germination and seedling establishment are critical processes for commercial plantation and depend directly on reserve mobilization as a source of cellular fuels and biosynthetic precursors. In this way, we investigated the coordination among reserve mobilization, metabolite partitioning, and mobilizing enzyme activities in Moringa oleifera Lam (moringa) an oil-seeded species employed in biofuel production. Seeds were germinated under controlled conditions and seedlings were grown hydroponically at a greenhouse. Samples were harvested at 0, 4, 8, 10, 12, 16, and 20 days after imbibition (DAI). The contents of dry mass (DM), neutral lipids (NL), soluble proteins (SP), starch, total soluble sugars (TSS), non-reducing sugars (NRS), and total free amino acids (TFAA) as the activity of isocitrate lyase (ICL), acid proteases, and amylases were determined. The mobilization of storage proteins was initiated during seed germination whereas the mobilization of storage lipids and starch was triggered throughout seedling establishment although all reserves have been depleted until 20 DAI. The partitioning of DM and metabolites to the roots and the shoots was uneven during seedling establishment. Low shoot/root ratio on the basis of DM could be related to the natural occurrence of moringa in drought climates. In the roots, TSS, NRS, and TFAA were accumulated from 12 to 16 DAI and then were consumed until the end of the experiment. In the shoots, TSS and TFAA were consumed in parallel with NRS accumulation from 12 to 20 DAI. The activity of ICL, acid proteases, and amylases was coordinated with the mobilization of lipids, proteins and starch respectively. Thus, we propose that the patterns of reserve mobilization and metabolite partitioning verified in moringa seem distinct from those found to other tree species and may be involved in metabolic strategies to enable environment colonization

Estudo do perfil térmico de fornos do tipo "caipira" utilizados pelo setor de cerâmica vermelha em parelhas na região Seridó-RN

The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace

Atenção à saúde mental na Estratégia Saúde da Família no Município de Parnamirim/RN: opinião dos profissionais, dos portadores de transtornos mentais e seus acompanhantes

This study aims to analyze and compare the opinion of professionals, managers and users about the mental health care in the Family Health Strategy (FHS). It is characterized as an Operations Research or Health System Research with a cross-sectional design and a descriptive quantitative nature. The study was developed from the application of the Opinion Measurement Scale allied to techniques of observation and structured interview in the city of Parnamirim / RN. The sample consists of 409 subjects, 209 professionals of the Family Health Strategy, 30 of the Oral Health Strategy, 19 of the Family Health Support Center, 24 directors of Basic Health Units, plus 68 users with mental disorders and 59 caregivers, respecting the ethical parameters of Resolution 196/96 of the National Health Council, trial registration number: CAAE 0003.0.051.000-11. Quantitative data were submitted to the Epi-info 3.5.2 for analysis. The network of mental health in Parnamirim involves the flow between the FHS, Psychosocial Care Centers, clinics and hospitals, having as main barriers the fragility of the referral and counter-referral system, of the municipal health conferences, of the FHS teams by the limitations in material and human resources as well as the population´s lack of acknowledge about the organization of the mental health network, issues that affect the integral attention. Even though the FHS professionals recognize the importance of their actions, they question their role in mental health care, experiencing difficulties in accessing psychiatric services (76.5%). Although most agree that the mentally ill is best treated in the family than in hospital (65.2%), the community health workers were the predominant category in the partial or total disagreement of this statement (40.8%), who is the professional in greater contact with the family. Nevertheless the caregivers miss the support of the FHS as the main focus of attention is on revenue control. The views of professionals, mental patients and caregivers converged in several statements, showing the main weaknesses to be focused by the mental health network of the city, as the perceptions that: (a) physical strength is needed to take care of mental patients for its tendency to aggression, requiring it to stay in the sanatorium for representing danger to society, (b) only a psychiatrist can help the person with emotional problems, (c) the user of alcohol and drugs does not necessarily develop mental illness, (d) the access barriers and doubts about the quality of psychiatric services, (e) caring of a mental health patient does not bring suffering to professionals. Therefore, the commitment to consensus building, monitoring and evaluation of the network are important mechanisms for an effective management system, reflecting in the importance of strengthening the health conferences and approximating different institutions. The results reinforce the importance of strengthening primary care through programs of continuing education focusing on the actions and functions of professionals in accordance with its competences and duties what contribute to the organization and response of mental health care, favoring user´s care and the promotion of family health

Controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido utilizando estimação neural de fluxo

This work describes the study and the implementation of the vector speed control for a three-phase Bearingless induction machine with divided winding of 4 poles and 1,1 kW using the neural rotor flux estimation. The vector speed control operates together with the radial positioning controllers and with the winding currents controllers of the stator phases. For the radial positioning, the forces controlled by the internal machine magnetic fields are used. For the radial forces optimization , a special rotor winding with independent circuits which allows a low rotational torque influence was used. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed and radial positioning controllers to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The DSP resources used by the system are: the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Ambiente de simulação híbrido integrando hysys e rede industrial Foundation Fieldbus aplicado ao controle de uma coluna de destilação

The main purpose of this work is to develop an environment that allows HYSYS R chemical process simulator communication with sensors and actuators from a Foundation Fieldbus industrial network. The environment is considered a hybrid resource since it has a real portion (industrial network) and a simulated one (process) with all measurement and control signals also real. It is possible to reproduce different industrial process dynamics without being required any physical network modification, enabling simulation of some situations that exist in a real industrial environment. This feature testifies the environment flexibility. In this work, a distillation column is simulated through HYSYS R with all its variables measured and controlled by Foundation Fieldbus devices

Metodologia para re-sintonia de controladores PID industriais

The present work has as objective to present a method of project and implementation of controllers PID, based on industrial instrumentation. An automatic system of auto-tunning of controllers PID will be presented, for systems of first and second order. The software presented in this work is applied in controlled plants by PID controllers implemented in a CLP. Software is applied to make the auto-tunning of the parameters of controller PID of plants that need this tunning. Software presents two stages, the first one is the stage of identification of the system using the least square recursive algorithm and the second is the stage of project of the parameters of controller PID using the root locus algorithm. An important fact of this work is the use of industrial instrumentation for the accomplishment of the experiments. The experiments had been carried through in controlled real plants for controllers PID implemented in the CLP. Thus has not only one resulted obtained with theoreticians experiments made with computational programs, and yes resulted obtained of real systems. The experiments had shown good results gotten with developed software

Controle dinâmico de robôs móveis com acionamento diferencial

This work addresses the dynamic control problem of two-wheeled differentially driven non-holonomic mobile robot. Strategies for robot positioning control and robot orientating control are presented. Such strategies just require information about the robot con¯guration (x, y and teta), which can be collected by an absolute positioning system. The strategies development is related to a change on the controlled variables for such systems, from x, y and teta to s (denoting the robot linear displacement) and teta, and makes use of the polar coordinates representation for the robot kinematic model. Thus, it is possible to obtain a linear representation for the mobile robot dynamic model and to develop such strategies. It is also presented that such strategies allow the use of linear controllers to solve the control problem. It is shown that there is flexibility to choice the linear controller (P, PI, PID, Model Matching techniques, others) to be implemented. This work presents an introduction to mobile robotics and their characteristics followed by the control strategies development and controllers design. Finally, simulated and experimental results are presented and commented

Formulação e caracterização de massas de grês porcelanato preparadas a partir de matérias-primas naturais do Rio Grande do norte e com adição de chamote de telhas

Traditional ceramics have an important role in the economy of Rio Grande do Norte. The local industries manufacture over 50 million shingles a month, corresponding to 60% of their overall production. As a result of processing flaws, roughly 20% of the production must be discarded, since little or no use has been envisaged for such fired components. Therefore, the use of this kind of residue, especially in the composition of other ceramic materials, comes as an interesting option from the economical and environmental point of view. In this scenario, the objective of the present study was to assess the effect of the addition of fired shingle waste in the composition of porcelainized stoneware tiles. To that end, two porcelainized stoneware tiles compositions were initially prepared. Subsequently, contents from 10 to 30% of roofing tiles chamote were added to each one of them. All raw materials and grog were characterized by FRX, XRD, and thermal analysis. The ceramics were fired using natural gas for 30 min at different temperatures, i.e. 1150, 1200 and 1250ºC, and fully characterized. The addition of roofing tiles chamote resulted in composition with superior properties compared to additive-free compositions. Porcelainized stoneware tiles products that fulfill required standards for practical applications were achieved