Controle feedback de nível baseado em sensor de imagem aplicado ao equipamento misturador-decantador à inversão de fases (MDIF®)

The treatment of wastewaters contaminated with oil is of great practical interest and it is fundamental in environmental issues. A relevant process, which has been studied on continuous treatment of contaminated water with oil, is the equipment denominated MDIF® (a mixer-settler based on phase inversion). An important variable during the operation of MDIF® is the water-solvent interface level in the separation section. The control of this level is essential both to avoid the dragging of the solvent during the water removal and improve the extraction efficiency of the oil by the solvent. The measurement of oil-water interface level (in line) is still a hard task. There are few sensors able to measure oil-water interface level in a reliable way. In the case of lab scale systems, there are no interface sensors with compatible dimensions. The objective of this work was to implement a level control system to the organic solvent/water interface level on the equipment MDIF®. The detection of the interface level is based on the acquisition and treatment of images obtained dynamically through a standard camera (webcam). The control strategy was developed to operate in feedback mode, where the level measure obtained by image detection is compared to the desired level and an action is taken on a control valve according to an implemented PID law. A control and data acquisition program was developed in Fortran to accomplish the following tasks: image acquisition; water-solvent interface identification; to perform decisions and send control signals; and to record data in files. Some experimental runs in open-loop were carried out using the MDIF® and random pulse disturbances were applied on the input variable (water outlet flow). The responses of interface level permitted the process identification by transfer models. From these models, the parameters for a PID controller were tuned by direct synthesis and tests in closed-loop were performed. Preliminary results for the feedback loop demonstrated that the sensor and the control strategy developed in this work were suitable for the control of organic solvent-water interface level

Avaliação de catalisadores a base de carbeto e nitreto de molibdênio na obtenção de lactitol via hidrogenação da lactose

Seeking a greater appreciation of cheese whey was developed to process the hydrogenation of lactose for the production of lactitol, a polyol with high added value, using the catalyst Ni / activated carbon (15% and 20% nickel), the nitride Mo2N, the bimetallic carbide Ni-Mo/ activated carbon and carbide Mo2C. After synthesis, the prepared catalysts were analyzed by MEV, XRD, laser granulometry and B.E.T. The reactor used in catalytic hydrogenation of lactose was the type of bed mud with a pressure (68 atm), temperature (120 oC) and stirring speed (500 rpm) remained constant during the experiments. The system operated in batch mode for the solid and liquid and semi-continuous to gas. Besides the nature of the catalyst, we studied the influence of pH of reaction medium for Mo2C carbide as well as evaluating the character of the protein inhibitor and chloride ions on the activity of catalysts Ni (20%)/Activated Carbon and bimetallic carbide Ni-Mo/Activated Carbon. The decrease in protein levels was performed by coagulation with chitosan and adsorption of chloride ions was performed by ion exchange resins. In the process of protein adsorption and chloride ions, the maximum percentage extracted was about 74% and 79% respectively. The micrographs of the powders of Mo2C and Mo2N presented in the form of homogeneous clusters, whereas for the catalysts supported on activated carbon, microporous structure proved impregnated with small particles indicating the presence of metal. The results showed high conversion of lactose to lactitol 90% for the catalyst Ni (20%)/Activated Carbon at pH 6 and 46% for the carbide Mo2C pH 8 (after addition of NH4OH) using the commercial lactose. Monitoring the evolution of the constituents present in the reaction medium was made by liquid chromatography. A kinetic model of heterogeneous Langmuir Hinshelwood type was developed which showed that the estimated constants based catalysts promoted carbide and nitride with a certain speed the adsorption, desorption and production of lactitol

Dos atos confessos aos afetos não-ditos: Um olhar sob as múltiplas experiências femininas a partir da análise dos discursos jurídicos, jornalísticos e orais

Women, subjectiveness, experimentations. This paper walks through gender, sexuality, body and subjectivity, bounding as the focus denaturalize the representations of womanlinessstaff and manliness and the modeled subjectivity by normative discusses that shows the transcendency based on multiplicities of experiences, wishes and life way wattled by men and women from the Caicó City s society in the decades from 1900 to 1945. For this, it was adopted a dialogic methodology inlcluding bibliographic and theorist references as well as sources like articles from Jornal das Moças (Lady s Journal); defloration s crime processes, abortion, infanticide and body lesions; iconographic sources and Caicó citizen memories in the period commented. Based on that sources, this work analyze the discursive construction of feminine through Justice and Jornal das Moças that paved by sanitarian, normalizing and moralizing discourses has spread clichés and stereotypes of womanlinessstaff and manliness, which has resulted by to universalize the experiences feminines in polarities and binary oppositions regarding to manliness, it has delineated them as asexual, irrational, anesthesiaed for pleasure and biologically meant to home activities modeling subjectivities that did not create ways for the singularization processes. This polarities, effects of sexual regulatory practices and gender legitimate the representations of courtship, maternity and honor, that although it has been incorporated not passivant on the building of the poor men and women subjectivity, it did not support itself in view of socio-cultural and economic reality of the poorest society side. Therefore, on this work emerge a plurality of women who has transited past the public sphere, who interlaced amorous informal relationships, who has kept relationships before the marriage, who hás established multiples familiar arrangements and helpful networks, who was single mothers without being considered dishonored women by social groups, who made matrimonial agreements without the rules of a formal civil marriage, who made use of beverageey to provoke the menstruation constituting multiples ways to experiment the life. This subjective feminine experimentations turned it possible to notice that representations concerning about the body, sexuality, date, maternity and honor of this women has constituted itself while molecularies and particulares . It was the affection not commented of the feminine sexuality that turned it possible to analyze the construction of singular subjectivities as a opened process, continuous, active, begetting new lands, life ways and wishes cartographies

Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on this subject emphasizing the thermal cyclic behavior imposed by the milling process as the main responsible for thermal cracks formation have been published. In these cases, the phenomenon appears as a consequence of the difference in temperature experienced by the cutting tool with each rotation of the cutter, usually defined as the difference between the temperatures in the cutting tool wedge at the end of the cutting and idle periods (T factor). Thus, a technique to minimize this cyclic behavior with objective of transforming the milling in an almost-continuous process in terms of temperature was proposed. In this case, a hot air stream was applied into the idle period, during the machining process. This procedure aimed to minimize the T factor. This technique was applied using three values of temperature from the hot air stream (100, 350 e 580 oC) with no cutting fluid (dry condition) and with cutting fluid mist (wet condition) using the hot air stream at 580oC. Besides, trials at room temperature were carried out. Afterwards the inserts were analyzed using a scanning electron microscope, where the quantity of thermal cracks generated in each condition, the wear and others damages was analyzed. In a general way, it was found that the heating of the idle period was positive for reducing the number of thermal cracks during face milling with cemented carbide inserts. Further, the cutting fluid mist application was effective in reducing the wear of the cutting tools.

Saberes de enfermeiros acerca do processo de enfermagem à luz do modelo conceitual de Wanda de Aguiar Horta

Objetivou-se caracterizar os saberes de enfermeiros sobre o Processo de Enfermagem. Métodos: Trata-se de um estudo qualitativo de natureza exploratório-descritivo, efetivado nos meses de agosto de 2010 a junho de 2011 com 12 enfermeiros atuantes da Estratégia de Saúde da Família da cidade de Juazeiro do Norte-Ceará. Aplicou-se uma entrevista através de um roteiro semiestruturado após a assinatura do termo de anuência pelos participantes. Resultados: Os enfermeiros percebem o Processo de Enfermagem como uma ferramenta tecnológica que permite a oferta de uma assistência de enfermagem sistemática, racional e planejada, tendo em vista o reconhecimento e atendimento das necessidades humanas básicas do ser cuidado. Conclusão: Portanto, os enfermeiros detêm uma convicção clara acerca da significação do Processo de Enfermagem e sua capacidade de satisfazer as demandas de cuidado do indivíduo, família e comunidade

A influência do processo de terceirização de tecnologia da informação na utilização dos modelos de contratação de serviços: um estudo de casos múltiplos

The change in the economic world and the emergence of Internet as a tool for communication and integration among the markets have forced organizations to adopt a different structure, process-oriented with a focus on information management. Thus, information technology has gained prominence in the organizational context, increasing its complexity and range of services provided by this function. Moreover, outsourcing has become an important model for flexible corporate structure, helping organizations to achieve better results when carrying out their activities and processes and be more competitive. To make the IT outsourcing, it is necessary to follow certain steps that range from strategic assessment to the management of outsourced service. Such steps can influence the form of contracting services, varying the types of service providers and contractors. Thus, the study aimed to identify how this IT outsourcing process influences the use of models for contracting services. For this, a study was conducted in multiple cases study involving two companies in Rio Grande do Norte State, specifically the health sector. Data collection was carried out with the CIOs of the companies surveyed through semi-structured interviews. According to the results obtained, it was found that the outsourcing process more structured influences the use of a more advanced contracting model. However, there are features found in these steps carrying more clearly this influence, as the goals pursued by outsourcing, the criteria used in selecting the supplier, a contract negotiation, how to transition services and the use of methods management, but can vary depending on the level of maturity in the relationship of the companies examined. Moreover, it was found that the use of contracting model may also influence how it is developed the IT outsourcing process, requiring or not its more formalized and organization

Estratégias internacionais da fruticultura do RN: o caso finobrasa processo e evolução

The present inquiry has as main objective to understand the process of formation of the international strategies of the exporting companies of fruits of the RN through the theory of the resource dependence. Aiming at to clarify as the companies they can carry through the process of internationalization through this theory had been study the behavior and economic theories of the process of internationalization of companies. Amongst the economic theories they are distinguished the eclectic paradigm of Dunning (1958), Vernon (1669) through the theory of the cycle of the product and Bucley and Casson (1979) with the theory of the international operations. In the mannering boarding they had been investigated the school of Upsala through Johanson and Valnhe (1977) with the concept of the increasing of the markets and in the distance psychic starts and the interaction of the purchaser-salesman of Hallen and Wiedersheim-Paul (1979). In this perspective it observes main the occured changes in the organization in function of this process, following the rules observed by the gradual ingression in the international market, having as base ways of entrances in the external market used by these companies, in view of the frist phase that the company presents of businesses. Ahead of you analyze of these theories the study searches to analyze the convergence of the concepts proclaimed for the theory of the dependence of resources (PFEFFER; SALANCIK, 1978). and strategies of internationalization of the companies. The research is characterized as qualitative case study which adopts and exploratory and analytical type, retrospective matrix. The adopted strategy is of case study and the unit of analysis consisting of the Finobrasa, pertaining company to the Vicunha Group. The main method of collection of data was halfstructuralized interview allied the documentary research that together had presented an empirical perspective of the internationalization process. The analysis and quarrel of the results understand the description and the interpretation of the one of the information through the technique of analyzes of content. Initially the historical of the exportation of fruits of the Rio Grande do Norte with the focus in the region Açu/Mossoró is presented and after that the information of the Finobrasa are presented as base of the study. The main events are identified that had constituted the phases of the strategical model of the company. It was observed that the dimensions most excellent amongst those proclaimed by the School of Uppsala had been the learning, staffs and the step-starts is sufficiently gifts in the reality of the company, as well as the aspects of strategical alliances since the consolidated relationship of the Vicunha Group create a more solid trajectory in the international market allied the conditions created windows of marked . One understands, therefore, that the investigated process still has base the theoretical theories of the internationalization strategies corroborating for the theoretical convergence of the rules proclaimed for the theory of the dependence of resources.

Processo de planejamento estratégico em universidade pública: o caso da Universidade Federal do Pará

The goal of this research is to check if the strategic planning developed between 2001 and 2009 into the State University of Para (Universidade Federal do Pará - UFPA) was consolidated into its Academic Centers as a management practice. To this end, we identified the planning formalization degree of the Academic Centers, the conceived tools for the planning, the conception and the methodological process used in the tools elaboration, as also its implementation. The research used a qualitative approach: it is descriptive and it uses the case study technique. The data were gathered from primary and secondary sources, through bibliography, documents, and field researches through semi-structure interviews. The analysis and data interpretation were done by each investigated Academic Center from the analytics categories guided by the specifics goals. We used theoretic fundamental based principles and the university as a study empiric reference based on its structure analysis, organizational processes and institutional strategic plan. We inspected how the strategic planning process was developed throughout the fixed period and how the investigated Academic Centers are from the collected documents and interviews. The theoretical foundation was built from three axis: the Brazilian undergraduate and posgraduate education system; the university itself including its singularity and complexity as an organization; and the planning as a strategic management process. The main results show us that the UFPA has updated regulatory milestones, presenting organizational structure, laws, instructions, manuals and deployed management model that give the strategic planning development conditions beyond its administration, i. e., into its Academic Centers. The centers also present those established milestones and develop the basic planning processes of the institution. Those processes are conceived based on the institutional strategic planning and the managers mainly use the procedural orientation defined by the university management, from where the conceptual foundation is originated and propagated. According to the literature and to the research done in this work, we can conclude that the Academic Centers from the UFPA developed the strategic planning practice. This planning is organized and founded and guided the plans and decisions which avoided the disordered management and, according to the managers, allowed the advances and performance improvement. We can conclude that the UFPA built an important foundation with respect to the management professionalization. On the other hand, we can not conclude that the management practice is consolidated since there are weaknesses into the structuring of the technical teams and there is not any management tool for the implementation of the elaborated plans

Sistemas de gerenciamento de bibliotecas: riscos decorrentes do processo de migração de dados

This work aims to analyze risks related to information technology (IT) in procedures related to data migration. This is done considering ALEPH, Integrated Libray System (ILS) that migrated data to the Library Module present in the software called Sistema Integrado de Gestão de Atividades Acadêmicas (SIGAA) at the Zila Mamede Central Library at the Federal University of Rio Grande do Norte (UFRN) in Natal/Brazil. The methodological procedure used was of a qualitative exploratory research with the realization of case study at the referred library in order to better understand this phenomenon. Data collection was able once there was use of a semi-structured interview that was applied with (11) subjects that are employed at the library as well as in the Technology Superintendence at UFRN. In order to examine data Content analysis as well as thematic review process was performed. After data migration the results of the interview were then linked to both analysis units and their system register with category correspondence. The main risks detected were: data destruction; data loss; data bank communication failure; user response delay; data inconsistency and duplicity. These elements point out implication and generate disorders that affect external and internal system users and lead to stress, work duplicity and hassles. Thus, some measures were taken related to risk management such as adequate planning, central management support, and pilot test simulations. For the advantages it has reduced of: risk, occurrence of problems and possible unforeseen costs, and allows achieving organizational objectives, among other. It is inferred therefore that the risks present in data bank conversion in libraries exist and some are predictable, however, it is seen that librarians do not know or ignore and are not very worried in the identification risks in data bank conversion, their acknowledge would minimize or even extinguish them. Another important aspect to consider is the existence of few empirical research that deal specifically with this subject and thus presenting the new of new approaches in order to promote better understanding of the matter in the corporate environment of the information units

Eutrofização e capacidade de carga de fósforo de seis reservatórios a bacia do Rio Seridó, região semi-árida do Estado do RN

The eutrofization is a natural process of accumulation of nutrients in aquatic´s body that it has been accelerated for the human´s actives, mainly the related with the activities of camp, industrial and the inadequate disposition of the domestic sewage. The enrichment of the aquatic´s body with nutrients, mainly the nitrogen and the phosphorus, and the consequent proliferation of algae and Cyanobacteria can commit the quality of the water for the public provisioning, for the fish farming and for other ends. The problem becomes more critical when there is a shortage of water naturally as in the semi-arid area of the Brazilian northeast. Before that problem this work had as objective evaluates the trophic state of six reservoirs of the basin of River Seridó of Rio Grande of Norte and also estimate the capacity of load of match of the reservoir and risk probabilities based on the established limits by the resolution Conama 357/05. The results demonstrate that the six reservoirs are eutrofization, with concentration of total phosphorus and cloro a in the water upster to 50 e 12 μg l-1. The results show that space homogeneity exists in the state trophic of the reservoirs, but a significant variation interanual in function of the increase of the concentrations of nutrients and decrease of the transparency of the water with the reduction of the body of water accumulated in the reservoirs.The results of the simulation risk estocastic show that the reservoirs could receive annually from 72 to 216 Kg of P, assuming a risk of 10% of increasing in more than 30 μg l-1 the annual medium concentrations of total match in the water of these reservoirs. This load could be high in until 360 kg of P a year in case the managers assume a risk of 10% of increasing in more than 50 μg l-1 the annual medium concentrations of total phosphorus in the waters of these reservoirs

Efeitos de manipulações ascendentes e descendentes sobre a comunidade fitoplanctônica em um reservatório eutrófico no semi-árido brasileiro

Top-down (grazing) and bottom-up (nutrient, light) controls are important in freshwater ecosystems regulation. Relative importance of these factors could change in space and time, but in tropical lakes bottom-up regulation has to been appointed as more influent. Present study aimed to test the hypothesis that phytoplankton growths rate in Armando Ribeiro reservoir, a huge eutrophic reservoir in semi-arid region of Rio Grande do Norte state, is more limited by nutrient available then zooplankton grazing pressure. Bioassay was conduced monthly from September (2008) to August (2009) manipulating two levels of nutrients (with/without addition) and two level of grazers (with/without removal). Experimental design was factorial 2X2 with four treatments (X5), (i) control with water and zooplankton from natural spot ( C ), (ii) with nutrient addition ( +NP ), (iii) with zooplankton remove ( -Z ) and (iv) with zooplankton remove and nutrient addition ( -Z+NP ). For bioassay confection transparent plastic bottles (500ml) was incubate for 4 or 5 days in two different depths, Secchi`s depth (high luminosity) and 3 times Secchi`s depth (low luminosity). Water samples were collected from each bottle in begins and after incubates period for chlorophyll a concentration analysis and zoopalnktonic organisms density. Phytoplankton growths rates were calculated. Bifactorial ANOVA was performance to test if had a significant effect (p<0,005) of nutrient addition and grazers remove as well a significant interaction between factors on phytoplankton growths rates. Effect magnitude was calculated the relative importance of each process. Results show that phytoplankton growth was in generally stimulated by nutrient addition, as while zooplankton remove rarely stimulated phytoplankton growth. Some significant interactions happening between nutrient additions and grazers remove on phytoplankton growth. In conclusion this study suggests that in studied reservoir phytoplankton growth is more controlled by ascendent factors than descendent

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Estudo dos parâmetros operacionais do processo de combustão in situ em reservatório de petróleo pesado

The occurrence of heavy oil reservoirs have increased substantially and, due to the high viscosity characteristic of this type of oil, conventional recovery methods can not be applied. Thermal methods have been studied for the recovery of this type of oil, with a main objective to reduce its viscosity, by increasing the reservoir temperature, favoring the mobility of the oil and allowing an increasing in the productivity rate of the fields. In situ combustion (ISC) is a thermal recovery method in which heat is produced inside the reservoir by the combustion of part of the oil with injected oxygen, contrasting with the injection of fluid that is heated in the surface for subsequent injection, which leads to loss heat during the trajectory to the reservoir. The ISC is a favorable method for recovery of heavy oil, but it is still difficult to be field implemented. This work had as an objective the parametric analysis of ISC process applied to a semi-synthetic reservoir with characteristics of the Brazilian Northeast reservoirs using vertical production and vertical injection wells, as the air flow injection and the wells completions. For the analysis, was used a commercial program for simulation of oil reservoirs using thermal processes, called Steam, Thermal and Advanced Processes Reservoir Simulator (STARS) from Computer Modelling Group (CMG). From the results it was possible to analyze the efficiency of the ISC process in heavy oil reservoirs by increasing the reservoir temperature, providing a large decrease in oil viscosity, increasing its mobility inside the reservoir, as well as the improvement in the quality of this oil and therefore increasing significantly its recovered fraction. Among the analyzed parameters, the flow rate of air injection was the one which had greater influence in ISC, obtaining higher recovery factor the higher is the flow rate of injection, due to the greater amount of oxygen while ensuring the maintenance of the combustion front

Relações de poder, fragmentação e gestão do território no semi-árido nordestinho: um outro olhar sobre o Cariri paraibano

This study aims to analize the Cariri Paraibano territory, as a product of relations of power that were being established along its historic process of territory formation. In this process, the fragmentation and the territory management are fundamental elements to socioterritorial reality comprehension. The theoretical-conceptual basis is based on notions of territory, region, power and territory management, which are articulated to the opinions and empiric confirmations origined from interviews made with several social actions. They also were made photographical records and researches on books, newspapers and magazines, as well on other information sources related to the object of studying. Obtained data confirm the pressuposement on which the relations of dominations and the used methods by the power s owners in the region created a little fruitful political practice and little adequate to the process of active participation of the local population on the territory management, even being on disagreement with the new political-institutional mechanisms, which take to political-administrative more democratic and participative in the country