Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal - RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher

Efeito da moagem de alta energia na microestrutura e nas propriedades magnéticas do compósito wc-10%p.Co

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase

Desenvolvimento e caracterização de compósitos poli(tereftalato de etileno) reciclado (PET reciclado) com flocos de vidro.

The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate new products, enlarging the cycle of materials and energy which are present. Among the polymeric residues, there is poly (ethylene terephthalate) (PET). PET is used in food packaging, preferably in the bottling of carbonated beverages. The reintegration of post-consumer PET in half can be considered a productive action mitigation of environmental impacts caused by these wastes and it is done through the preparation of several different products at the origin, i.e. food packaging, with recycling rates increasing to each year. This work focused on the development and characterization mechanical, thermal, thermo-mechanical, dynamic mechanical thermal and morphology of the pure recycled PET and recycled PET composites with glass flakes in the weight fraction of 5%, 10% and 20% processed in a single screw extruder, using the following analytical techniques: thermogravimetry (TG), differential scanning calorimetry (DSC), tensile, Izod impact, Rockwell hardness, Vicat softening temperature, melt flow rate, burn rate, dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). The results of thermal analysis and mechanical properties leading to a positive evaluation, because in the thermograms the addition of glass flakes showed increasing behavior in the initial temperatures of thermal decomposition and melting crystalline, Furthermore was observed growing behavior in the mechanical performance of polymer composites, whose morphological structure was observed by SEM, verifying a good distribution of glass flakes, showing difference orientation in the center and in the surface layer of test body of composites with 10 and 20% of glass flakes. The results of DMTA Tg values of the composites obtained from the peak of tan ä showed little reductions due to poor interfacial adhesion between PET and recycled glass flakes.

Desenvolvimento e caracterização de filtros cerâmicos para aplicações a altas temperaturas

Ceramic filters are cellular structures that can be produced by various techniques, among which we highlight the replication method, or method of polymeric sponge. This method consists of impregnating polymeric foam with ceramic slurry, followed by heat treatment, where will occur decomposition of organic material and the sinter of the ceramic material, resulting in a ceramic whose structure is a replica of the impregnated sponge. Ceramic filters have specific properties that make this type of material very versatile, used in various technological applications such as filters for molten metals and burners, make these materials attractive candidates for high temperature applications. In this work we studied the systems Al2O3-LZSA ceramic filters processed in the laboratory, and commercial Al2O3-SiC ceramics filters, both obtained by the replica method, this work proposes the thermal and mechanical characterization. The sponge used in the processing of filters made in the laboratory was characterized by thermogravimetric analysis. The ceramic filters were characterized by compressive strength, flexural strength at high temperatures, thermal shock, permeability and physical characterization (density and porosity) and microstructural (MEV and X-rays). From the results obtained, the analysis was made of the mechanical behavior of these materials, comparing the model proposed by Gibson and Ashby model and modified the effective area and the tension adjusted, where the modified model adapted itself better to the experimental results, representing better the mechanical behavior of ceramic filters obtained by the replica method

Efeito da adição de grafite expandido por microondas nas propriedades térmicas, elétricas e mecânicas de nanocompósitos de matriz epóxi

Epoxy based nanocomposites with 1 wt % and 3 wt % of nanographite were processed by high shear mixing. The nanographite was obtained by chemical (acid intercalation), thermal (microwave expansion) and mechanical (ultrasonic exfoliation) treatments. The mechanical, electrical and thermal behavior of the nanocomposites was determined and evaluated as a function of the percentage of reinforcement. According to the experimental results, the electrical conductivity of epoxy was not altered by the addition of nanographite in the contents evaluated. However, based on the mechanical tests, nanocomposites with addition of 1 wt.% and 3 wt.% of nanographite showed increase in tensile strength of 16,62 % and 3,20 %, respectively, compared to the neat polymer. The smaller increase in mechanical strength of the nanocomposite with 3 wt.% of nanographite was related to the formation of agglomerates. The addition of 1 wt.% and 3 wt.% of nanographite also resulted in a decrease of 6,25 % and 17,60 %, respectively, in the relative density of the material. Thus, the specific strength of the nanocomposites was approximately 33,33 % greater when compared to the neat polymer. The addition of 1 wt.% and 3 wt.% of nanographite in the material increased the mean values of thermal conductivity in 28,33 % and 132,62 %, respectively, combined with a reduction of 26,11 % and 49,80 % in volumetric thermal capacity, respectively. In summary, it has been determined that an addition of nanographite of the order of 1 wt.% and 3 wt.% produced notable elevations in specific strength and thermal conductivity of epoxy

Efeito de argilas organofílicas na estrutura e propriedades de nanocompósitos de poli(metacrilato de metila)

Nacomposites of polymers and lamellar clayminerals, has generated high scientific and technological interest, for having mechanical properties and gas barriers differentiated of polymers and conventional composites. In this work, it was developed nanocomposites by single screw extruder and injection, utilizing commercial raw material, with the goal to investigate the quality of new developed materials. It was evaluated the influence of the content and the kind of clay in the structure and in the nanocomposites properties. It was used regular and elastomeric poly (methyl methacrylate) (Acrigel LEP 100 and Acrigel ECP800) and six montmorillonites (Cloisite 10A, 11B, 15A, 20A, 25A e 30B) at the concentration of 1% e 3% in weight. The nanocomposites were characterized by X-ray diffraction (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), colorimetric, optical transparency, flexural and tensile tests, Rockwell hardness and esclerometry. It was founded that is possible to obtain intercalated and exfoliated nanocomposites PMMA/MMT, and the top results was obtained in the materials with 1%in clay weight organophilizated with 2M2HT (Cloisite 15A and 20A) presented intercalate and hybrid morphology (exfoliated and flocullated). The ones that was produced with organophilizated clay with 2MHTL8 (Cloisite 30B) had excellent visual quality, but the majority presented hybrid morphology. In the materials processed with organophilizated clay with MT2ETOH (Cloisite 30B), there were color change and loss of transparency. It occurs improvement in a few mechanical properties, mainly in the materials produced with PMMA elastomeric (Acrigel ECP800), being more significant, the increase in the resistance to stripping in those nanocomposites

Significados e percepções do homem diante da gravidez de sua companheira com síndromes hipertensivas

The general aim of the research was to comprehend the Social Representations constructed by the man in the face of his companion s risk pregnancy caused by hypertensive syndromes. The study is of exploratory and descriptive character in a qualitative approach developed at two public maternity hospitals, both located in Natal-RN, with 65 men whose wives had undergone high-risk pregnancy. The project was submitted to the Ethics on Research Committee of the Federal University of Rio Grande do Norte, Brazil (CEP-UFRN), with favorable report no. 81/07. For data collection, the following multimethods were employed: a word free association test; a projective test for registering mental images; and a semistructured interview schedule. The speech contents were analyzed in accordance with the Theory of Social Representations and complemented by the Central Nucleus Theory. The discussion of the results was grounded on literary findings of the companion s participation in pregnancy as well as in risk pregnancy associated with hypertensive syndromes. The data showed fear as representation s central nucleus, while recollections of that feeling referred to death of both companion and child in addition to fear of the unknown. The categories preoccupation and carefulness, other feelings, and clinical picture of the disease represented components of the peripheral nucleus. The results concerning mental images followed the same category criteria of the word free association test fear, other feelings, preoccupation, carefulness, and clinical picture of the disease. After being processed in accordance with the principles of content analysis, the statements originated three thematic unities: fear and insecurity in the presence of the companion s risk pregnancy; attitudes of carefulness to the risk pregnancy of the partner; and humanized assistance during the companion s risk pregnancy. Considering the results, the conclusion is that the partner s risk pregnancy caused by hypertensive syndromes represents, for the man, feelings of fear, preoccupation, insecurity, lack of acceptance and information, as well as attitudes of carefulness. The results reveal necessity of reorganizing the obstetric assistance with an eye to including the man as participant in the reproductive process. That demands extension of humanized carefulness to the companion with a view to make him an active coadjutor in the assistance of high-risk pregnant

Risco de contagio pela HIV e as medidas de biossegurança: Significados atribuídos no kcontexto da formação do profisional de saúde

Estudo com abordagem qualititativa, teve como objetivo geral, analisar as representações sociais sobre o risco de contágio do HIV construídas por estudantes universitários portugueses da área de saúde, apontando-se aspectos psicossociais à adoção das medidas de biossegurança. A coleta de dados foi realizada no período de fevereiro a junho de 2007, com a participação total de 486 estudantes da área de saúde de instituições de ensino superior, em Lisboa (Portugal), distribuídos em 248 de Medicina, 168 de Enfermagem e 70 de Medicina Dentária. Os estudantes concordaram em participar da primeira etapa da coleta de dados, constituída por um Teste de Associação Livre de Palavras com seis temas indutores de respostas e um questionário. Na segunda etapa, caracterizada por uma entrevista semi-estruturada , participaram 60 estudantes, sendo 20 de Medicina, 24 de Enfermagem e 16 de Medicina Dentária. Os dados coletados foram processados pelos sofwares SPAD-T e ALCESTE e discutidos com suporte teórico da Teoria das Representações Sociais. Os resultados revelam representações sociais atribuídas ao HIV e aids através das palavras: vírus, incurável, medo, toxicodependencia, discriminação, sofrimento e morte. Ao pensar no cuidado para o paciente, os estudantes assinala para um fazer com dificuldade e inexperiência, que gera nervosismo e medo. Em relação ao risco de contágio do HIV, os participantes associam a proteção, medo e sangue, atribuíndo sentidos as medidas de biossegurança pela proteção com luvas e preservativo, influenciado principalmente por ser uma doença incurável e que causa sofrimento e discriminação. As conclusões revelam que as representações sociais atribuídas a aids e ao risco de contágio do HIV fortalece a proteção e o cuidado para uso de medidas de biossegurança. A compreensão desses significados no processo ensino-aprendizagem devem ser assumidos como instrumento norteador para a formação do profissional da saúde pelas instituições responsáveis

Representações sociais dos trabalhadores de saúde da atenção básica sobre envelhecimento e o atendimento ao idoso

This study aims to identify the social representations built on senior care health workers of Primary Care. This is an exploratory research within the subsidized social representations held in 100 Basic Health Units in the city of João Pessoa-PB, with a sample of n= 204 workers of both sexes, who agreed to participate. To collect the data used to set an interview in two parts: the first looked at the Test of Free Association of Words using the inductive stimulus "senior care". The interviews were analyzed with the help of a software for quantitative analysis of textual data ALCESTE (version 2010). The results were interpreted from the theoretical framework of social representations. The study included 178 women (87.25%) and 26 men (12.75%), working in Family Health Units in the city of João Pessoa, the majority are aged between 40-49 years of age ( 28.92%), and have higher education with 81.86%. The results of Alceste link to the term inducer six (6) where the hierarchical classes representing senior care workers as synonymous with care and attention, showing situations neglect of the elderly, for that patience is required to promote the increase of disease prevention and living with the elderly to generate humanization in health services. It is considered that the social representations of health workers on assistance to the elderly may support modeling of strategic actions in health services with health promotion programs for large groups, able to modify practices and behavior in elder care and strengthening the policy was directed at the elderly

Percepção e realidade da política de atenção à saúde do idoso nas equipes de profissionais do programa de saúde da família do estado da Paraíba

Investigar os fatores relacionados á percepção que os profissionais das equipes do Programa de Saúde da Família (PSF) possuem frente à realidade da política de atenção à saúde do idoso nas Unidades Básicas de Saúde dos municípios litorâneos do Estado da Paraíba. Trata-se de um estudo observacional descritivo com uma amostra constituída por 120 profissionais de saúde de três categorias distintas (enfermeiro, médico e odontólogo), sendo 104 respondentes como profissionais e 16 respondentes como coordenadores de equipes. A coleta de dados foi realizada através de um questionário auto-aplicável de avaliação fechada e de questões de múltiplas escolhas. Os dados foram processados e armazenados no Programa Estatístico SPSS versão 15.0 e analisados à luz da estatística descritiva. Os resultados indicaram que os profissionais tiveram dificuldade em perceber a realidade da política integral e integrada de saúde do idoso junto aos serviços de saúde em que atuam. O estudo revelou ainda a necessidade de uma definição de estratégias para qualificação dos profissionais garantindo à atenção integral à saúde do idoso sob uma nova visão de atuação

Qualidade de vida de pessoas com úlcera venosa: associação dos aspectos sociodemográficos, de saúde, assistência e clínicos da lesão

Venous ulcer (VU) is a lower limbs injury resulting from inadequate return of venous blood in feet or legs. Although it is not a deadly disease, it causes chronic wounds, which seriously undermine patients´ quality of life (QOL) and sometimes leads to drastic family, social, economic and psychological changes. In this sense, there are several aspects that may influence the venous ulcers patients´ QOL. The study´s objective aimed on the association of socio-demographic and health, health care and clinical injury on UV patients‟ QOL. Analytical studies, which consider the complexity of factors involved in changes in UV patients‟ QOL has a cross-sectional and quantitative approach. The HUOL Ethics Committee approved this project (n.279/09). The collection of data lasted a period of 3 months in 2010 and it took place at the clinic of Angiology at Hospital Universitário Onofre Lopes (HUOL). The data sample consisted of 60 patients treated by UV angiologists in the HUOL Surgical Clinic. The results were analyzed with SPSS 15.0 by descriptive and inferential statistics. The study was based on UV patients that were predominantly female, average age of 61.4 years, that had low education level and low family income, with occupations requiring long periods of standing or sitting, but mostly retired, unemployed or laid off due to the disease and/or due to chronic diseases associated with the UV. The study took also into consideration patients that used inappropriate products, that were improperly treated by a professional caregiver, that lacked of adequate guidance and compression therapy, that performed no lifting of the lower limbs and regular exercise, that the time of injury were greater than or equal to six months, that were missing specific laboratory tests. The study‟s reference were on recurrent lesions, medium to large lesions area, bed of the lesion (injuries) with fibrin and/or necrosis, with amount of exudate with medium to large, odorless and no signs of infection, with tissue loss between 1st and 2nd degree, without collecting swab or biopsy and with pain. In general, QOL of researched individuals were considered low, the maximum score was 69 points, which the areas that were mostly influenced were the total scores of QOL functional capacity (0.021), emotional (0.000) and social functioning (0.080). Of the 60 individuals, 53.3% had scores between 40 and 69 points in SF-36, and they had the best scores in sociodemographic and health variables (ρ = 0.049). In respect to the assistance and injury characteristics, patients who scored between 40 and 69 points in SF-36 had better scores on these characteristics. By combining the socio-demographic variables, health, and handling characteristics of the injury, we observed a significant difference (ρ = 0.032) when linking them with the QOL total scores. When analyzing separately the domains of the SF-36 scores on the quality of life, we find that the areas that showed statistical significance were functional ability (ρ = 0.035), appearance (ρ = 0.019), emotional (ρ = 0.000), and mental health (ρ = 0.050). Among the socio-demographic characteristics studied, gender and marital status contributed more to the reduction of QOL and among the variables of assistance and the injury, orientation, reference and area of UV contributed the most. By analyzing these five variables all together in accordance with the overall score obtained in the quality of life, we found a significant correlation (ρ = 0.002); with 6.23 times more chances of patients have better QOL in the presence of these five positive factors. By conducting the Mann Whitney U test between all the five demographic variables, health, and clinical care, we found that this combination also proved to be significant (ρ = 0.006). Therefore, patients with these five variables positive tend to have a better QOL. Based on these results, we reject the null hypothesis (H0) and accept the alternative hypothesis (H1) proposed in this study because we noted that the QOL of patients with UV is associated with sociodemographic and health, health care and clinical aspects of the injury

Representações sociais sobre a prática do cuidado para enfermeiros da saúde indígena: um estudo transcultural

The desire to research on this subject arisen from the experience as nursing in the indigenous health, where I observed that many professionals from all regions of Brazil chose to work within this zone. It was notorious the nurse s difficult to settle in only one place for a long length of time. Probably due to health care in indigenous zones happens from a cultural confront. This confront materialize because both sides are imbued with their own culture: in one hand the nurse professional with its scientific knownledgment on the other the indigenous with their rituals and peculiars habits. In this context nurses should delineate and negotiate the reality through symbolic representations of life, and then make questions on the new reality. In this way, this study set out with the aim of apprehends the nurse s social representations of transcultural care in indigenous health. This knownledgment is important to avoid possible conflicts, shocks, difficulties and health care incongruence within this context. The data collect was carried out on a range of non structured interview guided by a pre-elaborated questionnaire with four questions and a hand drawing related to nurse s health care in the indigenous health. This research had a sample of 17 nurses from the Indigenous Sanitary District of Manaus in the Amazon State. To interpret data we used the Discourse of the Collective Subject, which findings were presented in three chapters: characterization of participants, discussion on themes prevalent in discourse; social representation of nursing care through infographics. The analysis revealed that the care in the indigenous health is challenging because the native people imbued in its world are perceived and processed according to the nurse s cultural lens, leading to materialize of some strangeness and adaptation difficulties, especially in the first contacts. The Social Representation on nursing practice, in many cases, is projected and contrived on the basis of scattered believes and on perception derived from common sense. The findings shows that representions are essential to mitigating the initial strangeness and help nurses to better situate themselves in the new universe. The nurse s practice in the indigenous health care should merge into each other. From the Social Representations is possible to perceive that assimilation, also comprehension on indigenous health system and its traditional knowledge are important to developing strategies to improve access and quality of care for indigenous peoples. After analysis the nurse s discourses and drawings, it is possible to represent the nurse s practice in the indigenous health as anthropophagism, since nurses should literally consuming its patients culture, digesting it and seize it as means to provide culturally congruent care. We highlight the urgent need for preparation and training of professionals to work more effectively with indigenous peoples

Qualidade da assistência e o conhecimento sobre o direito à saúde das pessoas com úlcera venosa crônica

The study aimed to identify the quality of care and knowledge of health rights of people with chronic venous ulcers (VU) in Brasilian National Health Care System (SUS). It is a cross-sectional study, with quantitative approach, performed at the University Hospital Onofre Lopes (HUOL). The study was approved by the Ethics Committee of HUOL (CAAE nº 0148.0.051.000-10). The sample by accessibility was composed for 30 people with VU treated at the outpatient surgical clinic of HUOL. For data collection we used a structured questionnaire composed of two parts: sociodemographic characteristics and of health, of care and the clinical course of VU; and knowledge of people with VU about the rights of health. The results were processed using SPSS 15.0 and analyzed by descriptive statistics. Given the characterizations sociodemographic and health presented, we identified a clientele of users with VU predominantly female (76,7%), aged from 60 years (66,7%), married/ stable union (60,0%), low education level (83,3%), family income lower than a minimum wage (73,3%), unemployeds and with chronic diseases (53,3%), sleep greater than or equal to 6 hours (76,7%) and were not alcoholics or smokers (93,3%). In relation to clinical conditions, were shown the presence of one or more relapses of VU (73,3%), predominance of granulation tissue/epithelialization in the bed of VU (60,0%), exudate serosanguineous (43,3%), in quantity medium/large (60,0%), with no predominance of presence or absence of odor (50,0%), all patients with tissue loss in grade III / IV, no signs of infection (73,3%) and presence of intense pain (50,0%). In the last 30 days the main venue of achievement of dressing was the HUOL (100,0%), the main compression therapy used was the Unna boot (60,0%) and on inability to perform the dressing on the unit were the own patients who made the exchange at home (40,0%). The majority of respondents listed out more positive factors associated with quality of care (56,7%) were satisfied with the care of SUS (76,7%), claimed to have knowledge about their rights (70,0%), but at the same time did not know the meaning of the acronym SUS (90,0%) and classified their level of information as inappropriate (70,0%). We realize that people with VU identified as good the quality of care and demonstrated inadequate knowledge about their rights to health in the SUS, but showed interest in acquiring more information. The basic rights to entry in the SUS are constitutionally guaranteed and need to be disseminated in order to make them known to the population, so it can be implemented and ensured a greater resolution assistance in treating this type of injury