Avaliação mecânica in vitro utilizando miniplacas quadradas e retangulares do sistema 2.0 mm em fraturas da região anterior de mandíbula

The aim of this study was to comparatively evaluate the mechanical strength of squared and rectangular 2.0 mm system miniplates comparing them to the standard configuration with 2 straight miniplates in stabilizing fractures in the anterior mandible. Ninety synthetic polyurethane mandible replicas were used in mechanical test. The samples were divided into six groups of three different methods for fixation. Groups 1, 2 and 3 showed complete fractures in symphysis, characterized by a linear separation between the medial incisor, and groups 4, 5 and 6 showed complete fractures in parasymphysis with oblique design. Groups 1 and 4 were represented by the standard technique with two straight miniplates parallel to each other. Groups 2 and 5 were stabilized by squared miniplates and groups 3 and 6 were fixed by rectangular design. Each group was subjected to a mechanical test at a displacement speed of 10 mm/min on a universal testing machine, receiving linear vertical load on the region of the left first molar. The values of the maximum load and when displacements reached 5 mm were obtained and statistically analyzed by calculating the confidence interval of 95%. Fixation systems using squared (G2) and rectangular (G3) miniplates obtained similar results. No statistically significant differences with respect to the maximum load and the load at 5 mm displacement were found when compared to standard method in symphyseal fractures (G1). In parasymphysis the fixation method using squared miniplates (G5) obtained results without significant differences regarding the maximum load and the load at 5 mm when compared to the standard configuration (G4). The fixation method using rectangular miniplates (G6) showed inferior results which were statistically significant when compared to the standard configuration (G4) for parasymphysis fractures. The mechanical behavior of the fixation methods was similar, except when rectangular miniplates were used. The fixation methods showed better results with statistical significance in symphyseal fractures

Padrão epidemiológico das oclusopatias muito graves em adolescentes brasileiros

OBJECTIVE: To describe the distribution of malocclusion and its associated factors in Brazilian adolescents. METHODS: Data from 7,328 subjects aged 12 years and 5,445 adolescents aged 15-19 years were analyzed. The adolescents took part in the Brazilian Oral Health Survey (SBBrasil 2010). The outcome was severe malocclusion according to the dental aesthetic index. The independent variables were sex, skin color, monthly household income, possessions, number of individuals in the household, untreated dental caries, missing teeth and dental appointments or lack thereof, frequency, and reason. Logistical regression analysis was carried out, considering the complex sampling cluster design, based on a hierarchical model. RESULTS: The prevalence of severe malocclusion was 6.5% and 9.1% in the 12-year-olds and the 15-19-year-olds, respectively. After adjustment, those with lighter- skinned black or black skin were 1.59 (95%CI 1.08;2.34) times more likely to present the outcome compared with those with white skin. The loss of one or more first molars increased 2.66 (95%CI 1.26;5.63) the chance to present severe malocclusion by the age of 12. Adolescents aged 15-19 whose household income was below R$ 1,500.00 (OR 2.69 [95%CI 1.62; 4.47]) and those who had seen a dentist for treatment (OR 2.59 [95%CI 2.55;4.34]) had the greatest chance of having severe malocclusion compared with those with higher incomes and those who visited the dentist for prevention.

Análise da degradação ambiental das áreas de preservação permanente localizadas no estuário do rio Ceará-mirim/RN

The purpose of this paper is to identify and analyze the main environmental impacts taking place in the permanent preservation areas located in the Ceará-Mirim River estuary/RN and its surrounding areas. For that, the study was divided in two chapters, structured in the shape of a scientific paper. The first is a theoretical proposition on the occupation of the APPs in light of the discussion of the geographic space and the sustainability of the development, where a bibliographical review was made emphasizing the production of the geographic space, the sustainability of the development and the permanent preservation areas. In the second chapter, from a systemic approach, geoprocessing techniques and the adaptation of the Pressure-State- Response Indicators System were used, the latter being developed by the Organization for Economic Co-operation and Development OECD. Therefore, from the methodological approaches used, it's been observed that the use of permanent preservation areas for purposes other than those determined in the legislation and, mainly guided by capitalist interests, leads to the environmental degradation of these areas, fact which has been confirmed in the empiric study conducted in the second chapter, where it was possible to identify a series of environmental impacts such as: deforestation of mangrove and riparian vegetation for carciniculture implantation, the devastation of dune areas caused by the urban expansion in the coastal stretch and siltation of fluvial channel

Natal: copa, história e sabores: o olhar dos acadêmicos do curso de comunicação social da UFRN, disciplina de reportagem pesquisa e entrevista, primeiro semestre de 2011

MUNEIRO, Lilian Carla; FREIRE, Libny (Orgs). Natal: copa, história e sabores: o olhar dos acadêmicos do curso de comunicação social da UFRN, disciplina de reportagem pesquisa e entrevista, primeiro semestre de 2011 [recurso eletrônico]. Natal, RN: EDUFRN, 2012.

Sobre (vivência) e mortalidade de pequenos negócios: o caso de mercados varejistas potiguares

This paper‟s starting point was the objective of understanding the relation between the reasons pointed out by small businesses owners for the continuity or shutdown of their businesses, and the reasons presented by the Environmental Theories. The paper discusses the Environmental Theories understand that it is supported by a systemic metaphor speech, discussing the theme in terms of organizational survival and mortality . The text reviews the literature showing the changes in the administrative thinking regarding the organization versus environment relation, and presenting general ideas about the micro and small businesses. In methodological terms, the qualitative approach was used in the research. Regarding the data collection technique, an in-depth thematic interview was used. It was carried out considering the elements of the techniques of life history and oral history, always giving priority to real world related narratives told by the interviewed subjects. The empirical corpus of the research was made up of seven owners of small retail businesses in two Potiguar cities: Natal and Mossoró. The interpretative and analytical process focused, at first, on the reflexive dialogue with each one of the owners‟ professional life history and business management experience, constituting the first level of analysis: reflections on individual narratives; and, afterwards, the interpretative process was developed through the analysis of all the subjects‟ statements, identifying the recurring themes and constituting the second level of analysis: reflection on the totalizing narrative. The themes identified in the totalizing narrative, that refer to the continuity of the businesses are: evolution, control, fidelity, liking what one does for a living. The themes that came up as reasons for shutdown are: lack of empathy with the business, lack of evolution, competition problems, suppliers and the government. The text synthesizes its comprehensions affirming that the reasons associated with continuity and shutdown of small markets, for this group of owners specifically, come up as a permanent tension between the volunteerism (quite human) and the determinism (systemic). The tension is shown in testimonies that at the same time evoke the organicist systemic logic through the themes evolution/no evolution, and also counterpoints with themes related to the interested human action, based on desires, feelings and personal convictions such as: liking what one does/ lack of empathy. As for the reflexive dialogue between the postulates of the Environmental Theories and the narratives, the results make it possible to affirm that, differently from the tension expressed by the subjects while talking about their reasons, the reasons associated with survival and mortality of businesses according to the Environmental Theories are theoretically polarized, seeming to preach options that are stagnated and shaping towards the subjects involved in the organization-environment relation

O projeto de arquitetura de espaços temporários com o uso de sistema construtivo remontável: um estudo exploratório

The purpose of this research is to study the portable or reassemblable architectures, which, different from conventional architecture (whose designs are of permanent buildings), corresponds to the designing of spaces with temporary purposes. The focus of the study is the architectural design of spaces that are produced from building systems that can to be moved to different places (process of assembly / disassembly / reassembly) in order to identify the types of spaces generated and the processes used in their design / projecting. The aim is to investigate relationships between the initial project conceived based on a Reassemblable Construction System (RCS) and its application in the architectural design of professionals and students in order to contribute to the understanding of the specificities of this type of design activity. To this end it was developed the exploratory research based on multimedia methods, which includes: documentary analysis, technical visits, interviews, surveys, academic exercise and documentation by images. Although the study is not conclusive, the results indicate significant differences between the point of view of the RCS´s designers and its users (architects and architecture students) since the users demonstrated to have some difficulty to access the features provided for the first group, in particular the students. It is also demonstrated that the use of RCSs seems to change the appreciation / hierarchization of the conditions of project design, since, unlike what happens in traditional architectural design, the designers who use them seem to be more concerned with constructive issues, especially the structural elements (support and covering), instead of functionality, aesthetics and even physical characteristics of the site

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

Desenvolvimento de um sistema misto de pasta à base de geopolímero e cimento portland para correção de perda de circulação

The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole

Desmame em recém-nascidos de muito baixo peso ao nascer no primeiro retorno ambulatorial após a alta hospitalar

Investigate intrahospital and neonatal determinants associated to the weaning of very low birth weight (VLBW) infants. Methods: 119 VLBW (<1500g) infants 81 were monitored from July 2005 through August 2006, from birth to the first ambulatory visit after maternity discharge. This maternity unit uses the Kangaroo Method and the Baby Friendly Hospital Initiative. Results: Out of 119 VLBW infants monitored until discharge, 88 (75%) returned to the facility, 22 (25%) were on exclusive breastfeeding (EB) and 66 (75%) were weaned (partial breastfeeding or formula feeding). Univariate analysis found an association between weaning and lower birth weight, longer stays in the NICU and longer hospitalization times, in addition to more prolonged enteral feeding and birth weight recovery period. Logistic regression showed length of NICU stay as being the main determinant of weaning. Conclusion: The negative repercussion on EB of an extended stay in the NICU is a significant challenge for health professionals to provide more adequate nutrition to VLBW infants

Avaliação do cuidado na estratégia saúde da família em metrópoles do nordeste brasileiro

Objective: To evaluate the implementation of the Family Health Strategy (FHS) in Brazilian cities of the Northeast, expanding coverage, analyzing the progress, challenges and innovations. Methods: Multicentric Evaluation Research, Studies Baselines in urban centers, using as a case study method. Selected cases of Aracaju, being capital, advanced coverage with extended team, and Fortaleza, capital coverage incipient and minimal staff. In Fortaleza, purposive sample of 11 Units Primary (APS), 03 managers, 53 professionals and 109 users. In Aracaju, 09 units of APS, 02 managers, 36 professionals, and 90 users. Structured interviews for managers, and structured to professionals and users. Descriptive analysis focusing on the political and institutional dimensions, organization and comprehensive care. Results: There was consensus that the ESF is the preferred port users and acts as inducing changes in care. In the case of Fortaleza, the specificities were: care protocols and community activities aimed at chronic conditions (100%) , with greater participation of doctors and nurses (93%) ; conjunction with more complex services, but the teams reported difficulties with the examination center and experts, the long waits and poor access to local services were the main difficulties reported by users., As innovative practice, the therapeutic group of elderly caregivers mentioned by respondents; There was intersectoral initiatives and teams 87 % of users have participated in meetings about health problems. In the case of Aracaju, care protocols were directed to the lines of care and formulated locally, 85 % coverage of the population with FHS counterpart local financing; employees hired by public tender; 70 % of teams with expertise in public health center for continuing education acting; democratization in management; access technologies, welcoming and computerization in different integrated networks, and evaluation matrix. Conclusions: The ESF has promoted access to health care and inclusion of disadvantaged populations. Different perceptions and practices in the organization of care, with distinct trajectories of reorganization. In the case of Fortaleza, predominance of model programs valuing older, with evidence of advances in care practices and teamwork, but restricted to primary care practices and incipient in public policy perspective. In Aracaju, had network integration with technologies related to the family, in which the ESF is consolidated as public policy. It can be argued that the XII APS expanding coverage, exhibited efficacy, despite the challenges inherent to the different degrees of implementation

Medidas de parâmetros morfológicos e funcionais do Coração em brasileiros: um subestudo do primeiro registro multicêntricos latino-americano em ressonância magnética cardiáca

There is no data about cardiac measurements em Brazilians obtained by CMR. This a muldisciplinary study with the objective of obtaining measurements of the left ventricle (LV) and right ventricle (RV) diastolic diameter (Dd), systolic diameter (Ds), diastolic volume (Dv), systolic volume (Sv), ejection fraction (EF) and myocardial mass in Brazilians. One hundred and seven (54 men and 53 women, mean age of 43.4 ± 13.1 years) asymptomatic individuals without heart disease were submitted to cardiac magnetic resonance (cMR) studies using steady state free precession technique. The means and standard deviations of the parameters of the LV and RV were respectively: LVDD = 4,8 ± 0,5 cm; LVSD = 3,0±0,6 cm; LVDV = 128,4±29,6 ml; LVSV = 45,2±16,6 ml; LVEF = 65,5±6,3%; LV mass = 95,2±30,8.1 g; RVDD = 3,9±1,3 cm; RVSD = 2,5±0,5 cm; RVDV = 126,5±30,7 ml; RVSV = 53.6±18,4 ml; RVEF = 58.3±8,0.0% and RV mass = 26,1±6,1 g. The masses and volumes were significantly higher in men, except for the LVSV. The RV EF was significantly higher in women. There was inverse correlation between RV systolic volume and with age, being more significant in men. This study describes for the first time benchmarks for cardiac measurements obtained by CMR among asymptomatic Brazilians individuals without heart disease and demonstrated differences according to sex and age

Determinação de parâmetros de qualidade para formas farmacêuticas homeopáticas

All medicine, whether allopathic or homeopathic, must go through strict quality control, which must ratify their characteristics throughout the period of validity. During the time of preparation and storage, solutions of the drugs are in permanent contact with packaging materials that can release undesirable substances to the solution. Several factors may influence the release of packing materials, and factorial design (FD) is a useful tool for analyzing the phenomenon. The aim of this study was the determination of quality parameters for Homeopathic solid (globules) and liquid (drops) dosage forms. It was carried out analysis in homeopathic globules for weight variation, mechanical strength, and moisture content uniformity. For liquid preparations, standard solutions were prepared from natural rubber bulbs, which were subjected to exhaustive extraction with two ethanol solutions (30 and 70%) in the ultrasonic bath for 20 minutes at 25°C and 50°C in three successive cycles. Studies of transfer have been made within five days, by spectrophotometric analysis in the UV region at 312 nm with λmáx and 323 nm for samples in 70% ethanol and 30% respectively. PH values were analyzed. We also conducted two FD studies, where the first, the three-level variables were solvent (chloroform, ethanol and nhexane), sample mass (30, 60 and 90mg), particle size (large disk, small disk and powder sample). In the second study, the solvent level variables were different ethanolic degrees (EtOH 30%, 70% and pure). The percentage of lending in the solutions was 5.5%, 12.4%, 24.2% and 41% of the total estimated in the reference solution. The values of rate constants of transfer were determined in the order of 0.0134 days-1 and 0.0232 days-1 in absorbance values, the solutions in ethanol at 30% and 70% respectively. These results suggest that the speed of transfer of materials from rubber is affected both by the nature of the vehicle as by the temperature

Conto com o seu voto: marketing político eleitoral no primeiro turno das eleições presidenciais de 2010

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

A legitimidade da jurisdição de primeiro grau na concretização dos direitos fundamentais: proposta de um novo modelo jurídico-administrativo para o segundo grau de jurisdição

The current study is about the legitimacy of lower court jurisdiction as a way of exercising basic legal rights, proposing, therefore, a new legal-administrative model for appellate court. In order to achieve that, a demonstration of the importance of basic legal rights in the Brazilian legal system and an open interpretation in light of the Constitution, as a way to affirm said rights, among which are accessibility to the justice system and proper legal protection, is required. As a result, the legitimacy to access the legal system resides in the Constitution, where the interpreter should seek its basic principles to achieve basic legal rights. It is observed that the lack of credibility regarding lower court decisions comes from the dogmatic view of truth born from power, and therefore, that the truth resides in decisions from appellate court and not from lower court judges. A lower court judge holds a privileged position in providing basic legal rights for citizens, considering his close contact to the parties, the facts, and the evidences brought forth. Class action suit is presented as an important instrument able to lead the lower court judge to provide basic legal rights. Small Claims Courts may be used as paradigm to the creation of Appellate State Courts formed by lower court judges, reserving to higher jurisdiction courts and Federal Circuit Courts, the decisions of original competency and the management and institutional representation of the judiciary system. Instilling an internal democratization of the judiciary is also required, which means the participation of lower court judges in electing their peers to chief positions in the court system, as well as establishing a limited mandate to higher court judges.