38 resultados para Preparador físico
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
SILVA, J. S. P. Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma. 2008. 119 f. Tese (Doutorado) - Faculdade de Medicina, Universidade de São Paulo. São Paulo, 2008.
Resumo:
In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
Galactans are polysaccharides sulfated present in the cell wall of red algae. Carrageenans are galactans well known in the food industry as gelling polysaccharides and for induce inflammatory process in rodents as animal model. The extraction of polysaccharides from A. multifida has been carried out by proteolysis and precipitation in different volumes of acetone, which produced three fractions (F1, F2, and FT). Chemical and physical analyses revealed that these fractions are sulfated galactan predominantly. Results of the antioxidant activity assays showed that all of these fractions have antioxidant activity and that was associated with sulfate content of the analysis of reducing power and total antioxidant capacity. However, these fractions were not effective against lipid peroxidation. The fraction FT presented higher activity on the APTT test at 200 μg (> 240 s). The assessment of the hemolytic activity showed that the FT fraction has the best activity, increasing lyses by the complement system to 42.3% (50 μg) (p< 0,001). The fraction FT showed the best yield, anticoagulant and hemolytic activity between the three fractions and therefore it was choose for the in vivo studies. The Inflammation assessment using the FT fraction (50 mg / kg MB) showed that the cellular migration and the IL-6 production increased 670.1% (p< 0,001) and 531.8% (p< 0,001), respectively. These results confirmed its use as an inflammation inducer in animal model. Cytotoxicity assay results showed that all fractions have toxic effects on 3T3 and HeLa cells after exposition of 48 hours, except when 100 μg for both F1 and FT were used. These results arise the discussion whether these polysaccharides it should be used as additive in foods, cosmetics and medicines.
Resumo:
This study examines the physical and chemical composition and the pharmacological effects of brown seaweed FRF 0.8 Lobophora variegata. Fractionation of the crude extract was done with the concentration of 0.8 volumes of acetone, obtaining the FRF 0.8. The physicochemical characterization showed that it was a fucana sulfated. Anti-inflammatory activity was assessed by paw edema model by the high rates of inhibition of the edema and the best results were in the fourth hour after induction (100 ± 1.4% at the dose of 75 mg / kg) and by the strong inhibitory activity of the enzyme myeloperoxidase (91.45% at the dose of 25 mg / kg). The hepataproteção was demonstrated by measurements of enzymatic and metabolic parameters indicative of liver damage, such as bilirubin (reduction in 68.81%, 70.68% and 68.21% for bilirubin total, direct and indirect, respectively at a dose of 75 mg / kg), ALT, AST and γ-GT (decrease of 76.93%, 44.58% and 50% respectively at a dose of 75 mg / kg) by analysis of histological slides of liver tissue, confirming that hepatoprotective effect the polymers of carbohydrates, showing a reduction in tissue damage caused by CCl4 and the inhibition of the enzyme complex of cytochrome P 450 (increasing sleep time in 54.6% and reducing the latency time in 71.43%). The effectiveness of the FRF 0.8 angiogenesis was examined in chorioallantoic membrane (CAM) of fertilized eggs, with the density of capillaries evaluated and scored, showing an effect proangigênico at all concentrations tested FRF (10 mg- 1000 mg). The FRF showed antioxidant activity on free radicals (by inhibiting Superoxide Radical in 55.62 ± 2.10%, Lipid Peroxidation in 100.15 ± 0.01%, Hydroxyl Radical in 41.84 ± 0.001% and 71.47 Peroxide in ± 2.69% at concentration of 0.62 mg / mL). The anticoagulant activity was observed with prolongation of activated partial thromboplastin time (aPTT) at 50 mg (> 240 s), showing that its action occurs in the intrinsic pathway of the coagulation cascade. Thus, our results indicate that these sulfated polysaccharides are an important pharmacological target
Resumo:
There are ores of clay in Piauí State that are used for red structural ceramics, which are naturally contaminated with calcareous vein. This is one thing that impedes its exploration in an adequate way, especially for tile production. The present work aims at verifying the influence of the calcareous contents in the technological structural ceramics area, seeking to determine a maximum permissible calcareous proportion/contents in the ceramic mass using the patterns of the local industry production. For the consecution of this paper, it was characterized the clay and calcareous material by FRX, DRX, TGA and DTA. It was also configurated by extrusion and burnt in the temperatures of 850°C, 900°C, 950°C and 1000°C pieces of the corpus with 0, 5, 10, 15 e 20% of calcareous proportion. After that, it was carried out technological samples of linear retraction, water absortion, apparent porosity, specific apparent mass and mechanic resistance. The results showed the possibility of using calcareous in the ceramic mass and in some cases the technological properties got better
Resumo:
The titanium and titanium alloys are widely used as biomaterial in biomedical device and so research have been developed aiming to improve and/or better to understand interaction biomaterial/biological environment. The process for manufacturing of this titanium implants usually involves a series of thermal and mechanical processes which have consequence on the final product. The heat treatments are usually used to obtain different properties for each application. In order to understand the influence of these treatments on the biological response of the surface, it was done, in this work, different heat treatments in titanium and analyzed their influence on the morphology, adhesion and proliferation of the pre-osteoblastic cells (MC3T3-E1). For such heat-treated titanium disks were characterized by optical microscopy, contact angle, surface energy, roughness, microhardness, X-ray diffraction and scanning through the techniques (BSE, EDS and EBSD). For the analysis of biological response were tested by MTT proliferation, adhesion by crystal violet and β1 integrin expression by flow cytometry. It was found that the presence of a microstructure very orderly, defined by a chemical attack, cells tend to stretch in the same direction of orientation of the material microstructure. When this order does not happen, the most important factor influencing cell proliferation is the residual stress, indicated by the hardness of the material. This way the disks with the highest level state of residual stress also showed increased cell proliferation
Resumo:
This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research
Resumo:
The state of Rio Grande do Norte presents a great potentiality for the production of ceramic tiles because of having natural raw material in quantity and quality making its economical exploration possible, beyond the great energetic differential of the state, the natural gás. This works aims to study the influence of the dolomite and granulometry concentration and calcinations temperature in the obtaining of formulations for porous coverings which have to be coherent to the project,s specifications. The experiments have involved the physical-chemical and mineralogical characterizations of raw materials and mechanical tests in the dry and burnt proof bodies preceding a mixture experiment planning with the use of the response surface methodology, in order to get the best raw materials combinations to produce a ceramic mass with specific properties. The twelve ceramic masses studied in this work were prepared by the via dry process, characterized, shaped by uniaxial pressing and sinterized in the temperatures of 940ºC, 1000ºC, 1060ºC, 1120ºC and 1180ºC, using a fast burning cycle. The crystalline phases formed during the sintering in the temperatures in study have revealed the presence of anorthite and diopside beyond quartz with a remaining phase. These phases were the main responsible ones by the physical- mechanical properties of the sinterized proof bodies. The proof bodies after the sintering stage have presented water absorption higher than 10% and a good dimensional stability in all studied temperatures. However, the flexural breaking strength results in the temperatures of 940ºC, 1000ºC and 1060ºC, under the temperature zone of the vitrification of ceramic whiteware do not reach the flexural breaking strength specific for the porous wall tile (15 MPa), but in the temperature of 1120ºC next to the vitrification temperature zone, some whiteware ceramic (formulations) has reached the specified value for the porous wall tile. The results of this work have showed that the studied raw materials have great importance for used in the production of porous wall tiles (BIII)
Resumo:
Introdução: Os hormônios estrogênicos possuem importante papel na defesa contra as espécies reativas do oxigênio, fato que se evidencia na maior incidência de doenças cardiovasculares e neurodegenerativas após a menopausa. O exercício físico melhora as defesas antioxidantes, contudo em altas cargas e em baixas concentrações de estrógeno possui efeito aditivo ao dano oxidativo. O ácido α-lipóico possui uma ampla gama de ação antioxidante e poderia contribuir para diminuição do dano nestas condições. Objetivo: O objetivo deste estudo é caracterizar a ação do ácido α-lipóico sobre a adaptação antioxidante e funções reprodutivas de ratas submetidas a natação moderada. Material e métodos: Os animais foram submetidos a natação diária (1 hora) e sacrificados após 30, 60 e 90 dias. Os animais foram divididos em controles sedentários e exercitados; suplementados (ácido α-lipóico 100mg/Kg/dia) sedentários e exercitados e animais ovariectomizados e suplementados com ácido lipóico. Avaliou-se diariamente o ciclo estral e os seguintes marcadores de estresse oxidativos foram mensurados em fígado e sangue: atividade enzimática da SOD, GPx e CAT, além do SRAT e GSH. Resultados: O protocolo de exercício aumentou a duração do ciclo estral no grupo controle exercitado, sobretudo na fase diestral. Neste mesmo grupo, houve diminuição da lipoperoxidação com melhora da atividade antioxidante da SOD e GPx. O grupo exercitado e suplementado não apresentou alteração na duração do ciclo estral e manteve os benefícios sobre o sistema antioxidante antes observado nos animais exercitados. A suplementação antioxidante juntamente com a natação em períodos superiores a 30 dias, diminuiu o processo de adaptação antioxidante quando comparado aos animais somente exercitados. Nos animais ovariectomizados, o exercício e a suplementação com ácido lipóico não promoveu adaptação antioxidante ao contrário dos demais grupos. Conclusão: O aumento na duração do ciclo estral e a melhora nos marcadores de estresse oxidativo seriam uma resposta adaptativa frente ao exercício moderado. O ácido lipóico impediu a alteração no ciclo induzida pelo exercício, mas preservou a melhoria no sistema antioxidante. A depleção estrogênica provocada pela ovariectomia eleva o potencial de dano oxidativo gerado pelo exercício. A ação antioxidante do LA na presença de estrógeno diminuiu excessivamente o dano oxidativo, comprometendo a adaptação antioxidante a natação. Nos animais ovariectomizados, contudo, o AL promoveu adaptação antioxidante ao exercício
Resumo:
analisar o efeito do treinamento aeróbio periodizado sobre a aptidão cardiorrespiratória e respostas afetivas em mulheres com síndrome dos ovários policísticos (SOP) e II) investigar se o exercício aeróbio realizado na zona de prazer para essa população atende a recomendação do American College of Sports Medicine (ACSM) no que se refere à intensidade para melhoria da saúde. Metodologia: foram incluídas mulheres na faixa etária entre 18 e 34 anos, com diagnóstico de SOP de acordo com o Consenso de Rotterdam. Para o subestudo I, oito pacientes sedentárias participaram de 16 semanas de treinamento aeróbio com incrementos mensais de intensidade: fase 1 = 60-70% da frequência cardíaca máxima (FCmax); fase 2 = 70-75% da FCmax; fase 3 = 75-80% da FCmax; fase 4 = 80-85% da FCmax. A intervenção foi realizada três vezes por semana, 40 minutos por sessão. Em todas as sessões foram registradas as respostas afetivas (Feeling Scale -5/+5) e a percepção subjetiva do esforço (escala de Borg CR 6-20). Antes e após a intervenção, as voluntárias realizaram teste ergoespirométrico. Para o subestudo II, 11 pacientes realizaram duas sessões de exercício aeróbio na zona de prazer, sendo registrados parâmetros relativos à demanda física através de receptor de GPS (Global Positioning System) de pulso com cardiofrequencímetro acoplado. As pacientes foram instruídas a realizar 40 minutos de exercício guiadas pelas âncoras verbais bom e muito bom (+3 e +5 na Feeling Scale). Resultados: no subestudo I, após 16 semanas de treinamento, houve aumento da aptidão cardiorrespiratória máxima (17,3%) e submáxima (21,5%). As respostas afetivas variaram entre bom (+3,1 ± 0,8) e razoavelmente bom xi (1,0 ± 0,9) e a percepção subjetiva do esforço entre muito leve a leve (10,2 ± 0,7) e um pouco difícil (12,7 ± 0,6) durante a intervenção. No subestudo II, as pacientes exercitaram-se a ~72,5 ± 6% da FC máxima, ~78,5 ± 6% da FC no limiar anaeróbio e passaram > 95% do tempo em intensidade moderada (~82%) e vigorosa (~16%) durante as sessões experimentais. Em média, as voluntárias reportaram as sessões como fácil (percepção subjetiva do esforço da sessão ~2,2 ± 0,7). Conclusões: o programa de treinamento aeróbio periodizado aumentou a aptidão cardiorrespiratória das pacientes analisadas e foi percebido como uma intervenção prazerosa. Adicionalmente, exercício aeróbio realizado de forma prazerosa atende a recomendação do ACSM no que se refere à intensidade para melhoria da saúde
Resumo:
Durante as últimas décadas, as indústrias farmacêuticas têm despertado grande interesse em óleos vegetais e vários extratos de planta por causa da sua baixa toxicidade e alta biodegrabilidade. O óleo de copaíba (Cop) é usado in natura na medicina popular como anti-inflamatório e antimicrobiano para tratar várias doenças, tais como inflamação da garganta, úlceras e infecções urinárias e pulmonares. Emulsões são sistemas dispersos termodinamicamente instáveis que consistem em dispersões de gotículas microscópicas em outro líquido imiscível. O objetivo deste trabalho foi preparar diferentes emulsões de Cop, determinar o EHL crítico deste óleo e avaliar a sua estabilidade, além de realizar estudos comparativos entre diferentes métodos de construção de diagramas de fases. As emulsões foram preparadas pelo método de inversão de fases variando as proporções de EHL de 4,7 a 16,7. A estabilidade foi determinada por vários métodos e os diagramas de fases foram produzidos pelo método de titulação usando diferentes procedimentos de agitação. As emulsões a base de Cop com EHL entre 12,7 e 15,7 foram as mais estáveis. As emulsões apresentaram boa estabilidade em curto e longo prazo, aspecto leitoso e baixos valores de índice de cremagem. Diferentes sistemas coloidais foram produzidos a partir dos diagramas de fases dependendo do processo de agitação. Baseado nesses métodos, o valor determinado de EHL do Cop foi 14,8, as emulsões permaneceram estáveis por mais de um ano e estes resultados indicam que o estudo das emulsões de Cop pode ser um promissor veículo de liberação tópica de fármacos e ativos cosméticos
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico
Resumo:
A sobrevida das pessoas com AIDS tem aumentado com o uso das terapias com antiretrovirais (TARV), esses, entretanto, possuem efeitos colaterais que interferem no padrão morfofuncional e hematológico, o que pode levar a alterações na qualidade de vida (QV). Este estudo quase-experimental objetivou avaliar parâmetros antropométricos, funcionais, hematológicos e de QV em pessoas com HIV/AIDS submetidas a um programa de exercícios de 16 semanas. Os participantes tinham idade entre 35 e 51 anos (n=15), eram registrados no Núcleo de atendimento do Hospital Giselda Trigueiro em Natal/Rio Grande do Norte e apresentaram CD4350cel/mm3, lipodistrofia e estavam em TARV. Foram avaliados o índice de massa corpórea (IMC), a relação cintura-quadril (RCQ), o percentual de gordura (%G), a força escapular e manual, a contagem de CD4, carga viral e QV, antes e após a intervenção. Essa foi realizada com exercícios de aquecimento e utilizou como base os exercícios resistidos, realizados 3x/semana, com 1h e intensidade de 60 a 75% de 1RM. Observaram-se modificações significativas no %G (p=0,031), força escapular (p=0,007) e preensão manual (p=0,039). Houve aumento no CD4 e a carga viral manteve-se indetectável. Nos domínios da QV, houve mudança significativa no do meio ambiente (p=0,021), espiritualidade, religiosidade e crenças pessoais (p=0,032) e na percepção da qualidade de vida e saúde geral (p=0,005). Os resultados sugerem que os exercícios resistidos para essa população constituem agente terapêutico coadjuvante no controle dos efeitos colaterais advindos da TARV, promovendo modificações na composição corporal, aumento da capacidade funcional e dos níveis de CD4, mantendo estável a carga viral e melhorando a QV. Sugerimos novos estudos com maior tempo de intervenção e com o acompanhamento de equipes multidisciplinares, o que poderá promover melhorias mais significativas na qualidade de vida e efetuar maior controle nas variáveis intervenientes
Resumo:
Compounded medicines have been reported by the ANVISA due to decreased of the therapeutic response or toxicity of these formulations. The aim of this work was to investigate the physicochemical quality control among naproxen sodium oral suspensions 25 mg/mL obtained from six compounding pharmacies (A, B, C, D, E and F) and the manufactured suspension (R). In the quality control test, the tests of pH, content, homogeneity, volume and physical and organoleptic characteristics were performed according to the Brazilian Pharmacopoeia. The analytical method for determination of naproxen in suspensions was validate. This method showed excellent precision, accuracy, linearity and specificity. In the content test the suspensions B, C and E showed lower value and the F suspension showed a high value of the content. The products C and E were disapproved in the description of the physical and organoleptic characteristics test. In the pH test, three suspensions were outside specifications (C, E and F). Only the products R, A and D showed satisfactory results in these tests and therefore they were approved for relative bioavailability test. The R, A and D suspensions were orally administered to Wistar rats and the blood samples were taken at time intervals of 10, 20, 40, 60 min, 3, 4, 6, 24 and 48 h. The plasma samples were immediately stored at 80 ºC until analysis of HPLC. The bioanalytical method validation showed specificity, linearity (R2 0.9987), precision, accuracy, good recovery and stability. The chromatographic conditions were: flow rate of 1.2 mL.min-1 with a mobile phase of acetonitrile : sodium phosphate buffer pH 4.0 (50:50, v/v) at 280 nm, using a C18 column. The confidence interval of 90% for the Cmax and AUCt ratio was within the range of 80 - 125% proposed by the FDA. Only one suspension, obtained from the compounding pharmacy D, was considered bioequivalent to the rate of absorption under the conditions proposed by this study. Thus, the results indicate the need for strict supervision from the relevant authorities to ensure the patient safety and the quality of compounded drugs by pharmacies