10 resultados para Prática Odontológica Associada
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology
Resumo:
Oral health measures directed to children are characterized by the lack of policies that consider the individual and his biopsychosocial aspects. As a consequence, it can be observed that a child´s dental experience has normally been prejudged as unpleasant and threatening. Thus, this study is aimed at investigating dental treatment from the child´s viewpoint using the theory of social representations for theoretical/methodological support. This theory was selected for being able to build practical knowledge surrounding the interrelations between social actors, the phenomenon and the world around them. The investigation was performed at the Professor José Fernandes Machado State School, located in the Ponta Negra district of Natal-RN-Brazil. The participants consisted of 30 children from the public elementary school system in the 6-10 year age group, who had undergone dental treatment within the previous year or were being treated at the time of data collection. An in-depth interview and story drawing within a theme were used as collection instruments. Thematic Content Analysis (Bardin, 2002) was used to analyze the material collected in the interviews, whereas for story drawing within a theme, in addition to content analysis, the data were also analyzed by the Coutinho model (2001). The two instruments demonstrated similarity of content as well as complementarity and contained categories associated to the model for dental treatment in children, the description of the dental office environment., the perception of the image of the dentist, as well as psychological and behavioral manifestations. The results enable us to understand determinate reactions of the children in relation to dental treatment, which has been characterized by its technical-curative approach, where the motive for seeking treatment, the manner in which it is performed and the relation of the dentist with the child are all in evidence. Thus, this study intends not only to reveal the viewpoint of children faced with dental treatment, but also to contribute to a dental practice directed towards them, in this way instilling in the professionals who attend them a more concrete awareness of the needs, anxieties and feelings of these young patients
Resumo:
Bioethics studies human behavior in the fields ofbiological sciences and health care. Tt strives for humanization in health services along with promoting the rights of patients. In view of the lack of dental research dealing with this topic, the present study was undertaken to identify, from the viewpoint of dental surgeons, ethical problems experienced in dental practice,understand how they occur and how professionals deal with them. It is a descriptive exploratory investigation within a qualitative approach. Empirical material was collected through semi-structured interviews performed with 15 dental surgeons who work both in private and public practice in the state of Rio Grande do Norte, Brazil. The content of the interviews was systemized and organized, resulting in the identification of topics, from which were grouped the ethical problems reported by the participants. The resu1ts indicate that many of the ethical problems coincide with infringements of the norms and mIes of the Dental Code of Ethics, confirming a dental ethic acquired during professional formation and therefore, inadequate for solving the problems that emerge in professional practice. Other questions stand out such as low salaries, competition and poor working conditions. Associated to these problems are lack of commitment and professional responsibility with the patients. Concem with maintaining user autonomy, guaranteeing access to specialized services, and the need for performing only procedures for which they are technically qualified arise in the responses, leading to difficulties in consolidating the principIes proclaimed by bioethics: autonomy, justice, nonmaleficence and beneficence. We concluded that the ethical problems identified in professional practice need to be understood beyond the dental dimension, towards a human approach. It is therefore necessary to incorporate health care management technologies into health practices, including dentistry, which implies recognizing the difTerent dimensions that surround individuaIs, that is, social, economic, political and cultural
Resumo:
The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software
Resumo:
A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems
Resumo:
The present paper analyses matters about the assessment in the context of the school organization in cycles. The complexity that involves the assessment turns it into a difficult subject, since the evidence that the model supported by the traditional approach contributes to foil the fulfillment of new continuous and wide-ranging assessment practices, that are coherent with a view of learning as a process established in the student-teacher-knowledge interaction. This paper has as guidance the following questions: How did the introduction of the teaching organization in cycles happen in Fortaleza/ CE? How far are the teachers prepared to the introduction of the cycles system, specially in the way of thinking and practicing the assessment? What are the teacher s involvements with this project and with the continuous assessment in the cycles? What meanings do the teachers give to the assessment in this project? Therefore, were determined as objectives: to comprehend the meanings attributed to the learning assessment by the teachers in contact with the cycles in Fortaleza/CE; to identify assessment practices that are closer to a less qualifying perspective, more related to the students learning and to the educational intervention in order to improve this process. The methodological orientation chosen was based on the presuppositions of the comprehensible interview, with reference to the studies of the French sociologist Jean Claude Kaufmann, developed with 15 (fifteen) teachers of 15 (fifteen) schools of the state teaching system of Fortaleza/CE. It was considered, in the methodology, the word as a central fact in the consolidation of the object of study, what allows to conceive the teachers as active participants of this research and of the discussions about assessment. The analysis about the speeches in the interviews made possible to glimpse the meanings attributed to the learning assessment that are not related to the traditional paragon, in spite of the dilemma in which the participants of the research faced at the time of the introduction of the cycles in Fortaleza/CE. These meanings were created between the presence and the absence of the teachers knowledge that, in their way, interact with the changes caused by the obligation of the teaching organization in cycles, seeking a strategy of self-organization as a consequence of the search for new knowledge connected with the teaching
Resumo:
In Brazil, 0-5 years old children just have an oral health care system since 1990 s. Innumerable experiences of implantation of the attendance to the babies in the cities had appeared throughout the years, but it hasn´t been evaluated the comparative effect between children displayed and not displayed to the program. In this regard, the main of this research was describe the Early Childhood Oral Health Care in public health service in Natal, Rio Grande do Norte, Brazil and evaluate the impact of this specific oral health care for babies by comparison of indicators between exposed and non-exposed children. It was created an experimental group, formed by children covered by program which was paired, based on sex, age and socioeconomic status, with a control group, formed by uncovered children. After filling ethical application, the parents of children were questioned about some risk factors to dental caries and, in sequence, it was accomplish an oral examination in the child. It was verified the Visible Plaque Index (VPI), Gingival Bleeding Index (GBI), dmf-s and verification of caries activity. The sample was 40 children in each group. The results showed, for VPI, a difference of 7 percentile points for the experimental group, however this difference had no statistical significance, obtained by Student s t test (p=0.314). In relation to GBI, the control group showed a low mean (0.8%) comparing with experimental group (2.77%) and this difference was statistically significant (p=0.003). The results for dmf-s and evaluation of caries activity showed no statistical difference between groups. Among the probable reasons for absence of impact of intervention, could be included: (a) the practice model was the same in two groups, or the difference was very weak and (b) the oral health care has intrinsic limitations for to impact on oral health in low income populations
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq
Resumo:
A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems