Otimização de parâmetros mecânicos e microestruturais dos moldes em areia de sílica ligados quimicamente pelo processo de cura a frio em fundição de aço

Surface defects on steel parts borne costs of smelting industries due to the need of rework. Sand molds are frequently used in foundry industries and largely responsible for providing surface defects. This study aims to optimize the levels of the molding process variables to minimize the occurrence of surface defects in steel castings in silica sand molds chemically linked by cold cure process. The methodology used the experimental design with split plot, being considered in the study the resin percentage factors in the mold formulation, addition of iron oxide, type of paint, the paint application method, amount of ink layers, use of hot air along the lines and waiting time of the mold before casting. They were analyzed as response variables erosion defects, sand inclusion, penetration, porosity and surface finish. Tensile strength tests were performed to evaluate the influence of factors on mechanical parameters and the microstructural parameters were carried out the analysis of X-ray diffraction, scanning electron microscopy (SEM) and thermal analysis (TG / DSC / dilatometry). The results elucidate that for the faulty erosion, the only significant factor with a 95% confidence level was the type of ink and the ink alumina-based superior results obtained. For the sand inclusion of defect, there were three significant factors, with best results obtained with alumina-based paint and spray applied using hot air in the mold before casting the metal. For the defect penetration, there were four significant factors, the best results being achieved with 0.8% of resin and addition of iron oxide in the molding formulation, the paint being applied by brush and standby time of 24 hours before leak. For the defect porosity with a 95% confidence level, no significant factors. For the defect surface finish, the best results were achieved with the 0.8% formulation of the resin in the mold and application of the paint brush. To obtain the levels of the factors that optimize all defects simultaneously, we performed a weighted average of the results of each type of fault, concluding that the best levels of the factors were: 0.8% resin and addition of iron oxide in the formulation of the template, application of two coats of paint applied with a brush or spray, using hot air in the mold before casting and 24 hours of waiting ready the mold before casting. These levels of the optimized factors were used in an experiment to confirm that ratified the results, helping to reduce rework and consequently reducing costs of cast steel parts.

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Aplicação do planejamento de experimentos no processo de desenvolvimento de produtos: pesquisa em uma sorveteria artesanal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Planejamento de trajetórias e navegação de robôs móveis

Oil exploration at great depths requires the use of mobile robots to perform various operations such as maintenance, assembly etc. In this context, the trajectory planning and navigation study of these robots is relevant, as the great challenge is to navigate in an environment that is not fully known. The main objective is to develop a navigation algorithm to plan the path of a mobile robot that is in a given position (

Planejamento de trajetórias e navegação de robôs móveis

Oil exploration at great depths requires the use of mobile robots to perform various operations such as maintenance, assembly etc. In this context, the trajectory planning and navigation study of these robots is relevant, as the great challenge is to navigate in an environment that is not fully known. The main objective is to develop a navigation algorithm to plan the path of a mobile robot that is in a given position (

A importância da Arquitetura da Informação no planejamento de ambientes digitais inclusivos

SANTOS, Raimunda Fernanda dos; SILVA, Eliane Ferreira da. A importância da Arquitetura da Informação no planejamento de ambientes digitais inclusivos.In: SEMINÁRIO DE PESQUISA DO CENTRO DE CIÊNCIAS SOCIAIS APLICADAS,17.,2012,Natal/RN. Anais... Natal/RN: Centro de Ciências Sociais Aplicadas, 2012. Trabalho oral.

Processo de planejamento estratégico em universidade pública: o caso da Universidade Federal do Pará

The goal of this research is to check if the strategic planning developed between 2001 and 2009 into the State University of Para (Universidade Federal do Pará - UFPA) was consolidated into its Academic Centers as a management practice. To this end, we identified the planning formalization degree of the Academic Centers, the conceived tools for the planning, the conception and the methodological process used in the tools elaboration, as also its implementation. The research used a qualitative approach: it is descriptive and it uses the case study technique. The data were gathered from primary and secondary sources, through bibliography, documents, and field researches through semi-structure interviews. The analysis and data interpretation were done by each investigated Academic Center from the analytics categories guided by the specifics goals. We used theoretic fundamental based principles and the university as a study empiric reference based on its structure analysis, organizational processes and institutional strategic plan. We inspected how the strategic planning process was developed throughout the fixed period and how the investigated Academic Centers are from the collected documents and interviews. The theoretical foundation was built from three axis: the Brazilian undergraduate and posgraduate education system; the university itself including its singularity and complexity as an organization; and the planning as a strategic management process. The main results show us that the UFPA has updated regulatory milestones, presenting organizational structure, laws, instructions, manuals and deployed management model that give the strategic planning development conditions beyond its administration, i. e., into its Academic Centers. The centers also present those established milestones and develop the basic planning processes of the institution. Those processes are conceived based on the institutional strategic planning and the managers mainly use the procedural orientation defined by the university management, from where the conceptual foundation is originated and propagated. According to the literature and to the research done in this work, we can conclude that the Academic Centers from the UFPA developed the strategic planning practice. This planning is organized and founded and guided the plans and decisions which avoided the disordered management and, according to the managers, allowed the advances and performance improvement. We can conclude that the UFPA built an important foundation with respect to the management professionalization. On the other hand, we can not conclude that the management practice is consolidated since there are weaknesses into the structuring of the technical teams and there is not any management tool for the implementation of the elaborated plans

Meio ambiente e planejamento: a relação cidade-natureza nos Planos Urbanísticos da cidade de Natal no século XX

This research studies the relation between city and nature in the urbanity s plans from Natal RN, Brazil, during the 20th century. Investigates and analyses the main documents that bring environmental s ideas inside from the urbanity s plans of Natal; gives the historical and economical situation from the city in each period studied; features the urbanity s plans, using categories of analyses to comprehension of this instruments. Try to contribute in the bigger process of historical rescue of Natal, and stimulates new studies. It was used documental s research, and bibliographic material. It was identified four (04) kinds of plans: the ones that focus in health and aesthetic (1901, 1929, 1935) technology and science (1968), zoning and control (1974, 1984) and environment. The hints founded shows that environmental ideas were put inside of the plans by government demands, especially in 1994 s plan, almost always without popular contribution and without this population get understands its meanings and implications

Outorga onerosa do direito de construir e dinâmica do mercado imobiliário formal: planejamento e descaminhos na expansão urbana de Parnamirim RN (2008-2010)

The `Outorga Onerosa do Direito de Construir - OODC` (Public Concession of Building Rights), instrument instituted by The City Statute in 2001, has as main objective the recovery of urban property, seeking for a fair distribution the urbanization benefits. The possibility of usage of the OODC instrument is linked to the maximum utilization coefficient, determined to specific areas in accordance to existing infrastructure conditions, further taking into account the formal real estate market, expansion axis and crowding. Being an instrument which establishes values to be paid for a better use of land, it maintains a narrow relation to the real estate, incentivizing or discouraging the crowding in specific areas. The present study investigates the relationship between the criteria for the making of the Public Concession of Building Rights instrument and the dynamics of the formal real estate market. It takes as empiric universe Parnamirim (RN), part of the Natal Metropolitan Area (RN), focusing on the application of the OODC in the period of 2008-2010. It seeks to better understand the necessary basis for the formulation of the instrument, about how it works and its relation to the formal real estate market. It aims to depict the formal real estate market by presenting the production of urban space in Parnamirim in terms of intensity and nature of the real estate, furthermore identifying the licensed properties through the application of the municipality instrument. For the conclusion, it is discussed the criteria for the formation of OODC, its relationship to the dynamics of the formal real estate market and its influencing possibilities in the processes of usage and occupation of land in the context of urban planning

Áreas de transição rural e urbana em São Gonçalo do Amarante : elementos para delimitação no planejamento territorial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Contra as Secas: a engenharia e as origens de um planejamento regional no nordeste brasileiro

Droughts surfaced in 1877 as a crucial problem for the birthing Brazilian nation. Engineers, who formed the country's technical and scientific elite, took it upon themselves to study, understand and fight the problem through planned actions of intervention on space. This work, based on proposals and discussions contained in engineering magazines and reports, aims to provide elements for the comprehension of how these systematized actions against droughts, in the Iate nineteenth and early twentieth century, contributed to spatial analysis and the formation of a (then-inexistent) regional and territorial planning discipline in Brazi!. Engineers, by taking up the position of masterminds in the country's modernization, guaranteed for themselves personal economic stability, social prestige and political power. By understanding nature, either as a resource to be exploited or an adversary to national progress, they contributed to the delimitation of the region now known as the Northeast. By seeking to understand the drought phenomenon, they created knowledge about the space they sought to intervene on; by constructing their projects amid political and economical difficulty, they changed the organizational structures of cities and country in the northeast. The proposals for açudes (Iarge water reservoirs) allowed the fixation of population and the resistance against droughts; the roads - railroads and automotive roadways - connected the sertão to the capitais and the coast, speeding up help to the affected populations during droughts and allowing the circulation of goods so as to strengthen the local economies in normal rimes. The adopted practices and techniques, adapted from foreign experience and developed through trial and improvement, were consolidated as an eminently spatial intervention course, even if a theoretical body of regional or territorial planning wasn't formed in Brazil. Regional Planning proper was first applied in the country in the Northeast itself, in the 1950s, based off an economical view of reality in order to achieve development. The engineer's work prior tothat date, however, cannot be dlsconsldered. It was proved that, despite facing financial and political hurdles, engineers had a profound commitment to the problem and intended to act systematically to transform the economical and social relations in the region, in order to be victorious in their struggle against droughts

Sanitarismo e planejamento urbano: a trajetória das propostas urbanísticas para Natal entre 1935 e 1969

The Escritório Saturnino de Brito (Saturnino de Brito Office), created in 1920 under the sanitaristic guidance of the engineer Saturnino de Brito, has a vast record of works throughout the whole national territory, even after the death of its founder, in 1929 at which point his son, and also engineer, Saturnino de Brito Filho, assumed the head of the company , with a compromise to continue his father s work and assure his administrative, technical and urbanistic principles up until the early 1980s, when that institution came to an end. The scarcity of theorical studies about this Office, alongside the importance of the contributions it made in countless cities, oriented the focus of this study on its performance in Natal, where it remained from 1935 to 1969, designing, executing and managing sanitationist works and the services associated with them and going through several political, economical, social, cultural and urbanistic contexts periodicized in this work into three moments. Thus, it is intended to analyze how the Saturnino de Brito Office behaved and adapted itself to the conjunctural changes that unfolded into each of these moments, and more specifically, to observe the forms of intervention adopted the principles, the instruments and the scope aiming to verify the transition of the sanitaristic set of urbanistic ideas into the urban planning as a development strategy on a local level

Otimização do processo de síntese do aluminato de cobalto via método de polimerização de complexos (MPC) através do planejamento fatorial fracionado

In the ceramics industry are becoming more predominantly inorganic nature pigments. Studies in this area allow you to develop pigments with more advanced properties and qualities to be used in the industrial context. Studies on synthesis and characterization of cobalt aluminate has been widely researched, cobalt aluminate behavior at different temperatures of calcinations, highlighting especially the temperatures of 700, 800 and 900° C that served as a basis in the development of this study, using the method of polymerization of complex (CPM), economic, and this method applied in ceramic pigment synthesis. The procedure was developed from a fractional factorial design 2 (5-2) in order to optimize the process of realization of the cobalt aluminate (CoAl2O4), having as response surfaces the batch analysis data of Uv-vis spectroscopy conducted from the statistic software 7.0, for this were chosen five factors as input variables: citric acid (stoichiometric manner), puff or pyrolysis time (h), temperature (° C), and calcinations (° C/min), at levels determined for this study. By applying statistics in the process of obtaining the CoAl2O4 is possible the study of these factors and which may have greater influence in getting the synthesis. The pigments characterized TG/DSC analyses, and x-ray diffraction (XRD) and scanning electron microscope (SEM/EDS) in order to establish the structural and morphological aspects of pigment CoAl2O4, among the factors studied it were found to statically with increasing calcinations temperature 700°< 800 <900 °C, the bands of Uv-vis decrease with increasing intensity of absorbance and that with increasing time of puff or pyrolysis (h) there is an increase in bands of Uv-vis proportionally, the generated model set for the conditions proposed in this study because the coefficient of determination can explain about 99.9% of the variance (R²), response surfaces generated were satisfactory, so it s possible applicability in the ceramics industry of pigments

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%