7 resultados para Petoskey, Ted
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic
Resumo:
For many y ears, the federal government policy is to use project for in order to speed up the work for decreasing the elementary education deficit vacancy . In Natal municipality the schoolhouses for children, from 0 to 6 years of age are denom inated Muinicipality Centre for Elementary Education. The federal government provides capital for the news edifications by the program of government named PROINFÂNCIA. This program embraces three types of projects. Type “A” must be furnished by the interes ted municipality and approved by Education and Cultura Ministry. The type “B” is standard plan with capability to 120 schoolchildren in full - time or 240 in two turns and ground plot measuring 40 x 70m and the “type C” also a standart projects to 60 schoolc hildren in full - time or 120 in two turns and ground plot measuring 35 x 45m. Sometimes , due to scarcity of bigger ground plot s is the “type C” instead of “type B”, referring to offering vacancies. In this meaning, this study intend s to present the draft - project to elementary schoolhouse, modulated and flexible, emphasizing the children needs . Therefore, it was studied concept, school architecture, construction technology, reference study and visiting to MCEE Fernanda Jales (PROINFÂNC IA “tipo B”). However, the proposal synthesizes the draft - project by module, implanting in its totality or in parts, according to its necessity and lot cha racteristic.
Resumo:
The programs of conditional cash transfer are widespread in developing countries in Latin America with emphasis on Brazil as a new paradigm in social p olicies for poverty eradication . Consist of transferring monetary funds from the government directly to poor families by fulfilling the condition alities on education and health . In health, even wi th variations between countries , conditionality targeting public pregnant women and children with a view to improving health indic ators maternoinfantil as growth , infant mortality and prenatal care. The objectives of this study are to compare the transfer progr am conditional Brazilian income , the Family and similar programs in Latin A merica in relation to it s effects on growth in children , and to evaluate the effect of Bolsa Família in the prevalence of use of services ( conditionalities ) of prenatal care in Brazilian health services whose teams joined the Programa de Acesso e Melhoria da Qualidade da Atenção Básica (PMAQ - AB) . For the first objective a systematic review , we selec ted ten articles between 1007 ( one thousand and seven ) found in the databases Embase , PubMed, Scopus , Scielo and Lilacs databases was performed . Articles are ob servational epidemiological studies of transverse descriptive and analytical types of cohort and case - co ntrol. For the second objective, for it is a prevalence study , a statistical analysis using Poisson regression with robust variance was performed to i nvestigate how the prevalence of compliance with conditionalities on health was influenced b y various explanatory variables . Ratios , crude and adjusted prevalence , with their respective confidence i ntervals of 95 % were estimated . The family joined the sch olarship program was considered as the main expo sure variable . Confounding variables were: maternal age , race / color, paid employment , marital status and region of residence . In d ata analysis software R 3.0.1 (RDevelopment Core Team 2013 ) was used . Rega rding the comparison of the Bolsa Família with other programs in Latin America , the review found similar results regarding the positive effect of income transfer in the nutritional status o f beneficiary children programs , and these effects are more evident in children under two years old and belonging to familie s of lower socioeconomic status . For the prevalence of conditionalities entres different groups of users of the Bolsa Família and nonusers results showed no statistically significant difference betwe en respondents (with children under two years ) registered and not registered in PBF on issues relating to: me et at least six prenatal visits , meet and participate in health education activities . It follows from side to increase minimum income for families in extreme poverty showed positive impact on children's health in Brazil and Latin America. The o ther is not confirmed in Brazil , an increase in conditionality expressed in use of primary care by the user s of the Bolsa Família services.
Resumo:
This thesis aims at understanding the aspects related to the concept of humanization that contribute to a humanized education in the pedagogical project of the medicine graduation course of the Federal University of Rio Grande do Norte (UFRN). It has been used a qualitative research through non - structured interviews to six professors and through the focus group technique with participant observation of 30 students of the 2 nd , 4 th and 6 th terms of the med program. The data has been analyzed through the cate gorical thematic subject analysis technique from which two categories have emerged: tendency changes and initial changes. In the former we ’ ve identified aspects related to the social reality based in the experiences of professors and students in their work field; the competencies such as stimulation to the students ’ critical and reflexive knowledge through professors ’ encouragements and learning to learn as a way of developing professors ’ education towards the process of learning and evaluation of students. In the latter, we ’ ve noticed positive and negative aspects. While in the positive aspects we ’ ve testified actions and attitudes that were crucial for the development of the curricular proposals, in the negative ones we ’ ve verified controversial arguments between the students and teachers ’ speeches regarding the process of medical education in a humanized approach. For last, we ’ ve got large different results within the period investigated. However, we understand that the data found in the study has contribu ted to reach the proposed objectives regarding what has been perceived between the professors and students ’ point of views in relation to a humanized based education. Even if it ́s an initial perception, it is moving towards a medical education more humaniz ed and centered in the human being.
Resumo:
The RANK / RANKL / OPG sy stem plays an important role in bone formation and resorption . This finding has been regarded as one of the m ost important advances in the understanding of bone biology with respect to osteoclastogenesis. The aim of this study was to investigate the expression of RANKL / RANK / OPG markers in reimplanted t eeth of rats, and to observe the relationship between the expression of these markers and to oth and bone resorption. Thirty male Wistar rats (Rattus norvegicus albinos) had their maxillary right incisors extrac ted , and were divided into 2 groups according to the period that the extracted teeth were kept in dry air before reimplantation : G1 (n = 15) - 5 minutes , and G2 (n = 15) - 60 minutes . After reimplantation, teeth were analyzed at intervals of 1, 3 and 7 da ys. After these experimental periods, the animals were euthanized. Longitudinal sections with 5μm thick were obtained and stained with Hematoxylin and Eosin for histological analysis , while 3μm thick sections were subjected to immunohistochemical analysis of OPG , RANK and RANKL. The results showed that the RANK / RANKL / OPG system actively participates in both the repair process, as well as tooth and bone resorption . Extr a - alveolar time of 60 minutes before replantation caused minor expressions of RANKL a nd OPG, not influencing the expression of RANK; RANKL immunostaining showed higher in both groups when compared to other biomarkers, participating in all phases of bone and tooth resorption; RANKL was associated to both osteoclastogenesis and c ell ular proliferation , and was expressed in both groups.
Resumo:
Aim : To evaluate and to standardize surface electromyography (sEMG) normalization procedures for respiratory muscles by comparing muscle activation during Maximal Voluntary Isometric Contraction (MVIC) and Maximal Respiratory Pressures (MIP, MEP and sniff test). Methods: Healthy subjects were evalua ted regarding demographics, spirometry and sEMG during the five maneuvers: sniff test, MIP , MEP and Maximal Voluntary Isometric C ontraction (MVIC) of RA, SCM and SC A . For electrode placement, skin was prepared with abrasion, followed by shaving in the foll owing regions for acquisition of el ectromyographic signals: (1) SC M: lower third of the distance between the mastoid process and t he sternoclavicular joint; (2) SC A : 5 cm to the right from the sternoclavicular joint and at this point, up to 2 cm; and (3 ) RA: the level of umbilicus, 4 cm to the right. In electromyographic variables analysis , the data normality was assessed by Shapiro - Wilk test. Comparisons among studied maneuvers were performed by Friedman Test and Dunn’s post - hoc for multiple comparisons a mong inspiratory maneuvers, and Mann Whitney test for expiratory maneuvers. Subgroups differences between genders were performed by Student's t test or Mann - Whitney test according to data normality. Results: 35 subjects participated in the study, b ut 5 we re excluded (BMI> 25 kg/ m²). Sample consisted of 30 subjects (1 5 women), mean age 27.3±7.43 years, BMI 22.2 ± 1.69 kg/m² and spirometric indices within normal limits. Specific MVIC for SCM, SCA and RA showed the highest RMS. When we grouped sample into gender we found no difference among RMS values for the studied SCM maneuvers, while for SCA, MVIC SCM / SCA was the one with the highest RMS and for RA, MVIC RA in men. Once considering women, MVIC SCM/SCA showed the highest RMS for SCM, SCA and MVIC RA showed t he highest value for RA. Conclusion: MVIC for SCM, SCA and RA muscles showed the highest RMS values. When comparing RMS between the studied groups, there was no significant difference between men and women.
Resumo:
The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic